Supply, Erection, Testing and Commissioning of 132kV D/C Jambuva Itola TSS line on 132kV D/C Panther tower with ACSR Panther Conductor and 48F OPGW cable having route length of 7.47 km for drawl of 60 MW Power by Western Railway for 132kV Itola TSS under LTOA Deposit work thereof under Option 1A under Construction Division Jambuva of Jambuva circle on turnkey basis

Sr. No. Description of Works - SAC Code 9954 Amount in Rs.

PART -A Supply of Materials

Erection of Line

TOTAL F.O.R. COST WITHOUT GST

Service of "Works Contracts" GST @ 18% (SAC 9954)

TOTAL END COST WITH GST

I am / we are willing to carry out this service package of works contract stated above at GST 18% (in figure) ______ %

(in words _____ %) below / above the estimated TOTAL END COST for all the items stated there in.

The amount of tender works out with above % (in figure) for TOTAL END COST Rs. _____________ (in words Rs.

I / we confirm that our above quoted rates are ON firm price basis; except supply of tower materials (including

nut-bolts) and Hardware & accessories of conductor for which Price variation will be applicable.

1) Separation of the Contract into Supply of Goods, Services and Civil Work, is only for convenience and better economical

management and for the ease of Accountancy but the entire Contract, is to be assessed under GST Law, as the Works Contract

Service, which is, as per the provisions of Section 2(30), read with, Section 2(119), further read with, Paragraph 6(a) of the

Schedule II to the CGST Act, 2017 or SGST Act, 2017 and similar provisions, applicable under the UTGST Act, 2017and the IGST

Act, 2017 and the entire activity, would be subjected to levy of Tax, at the rate of 9% CGST + 9% SGST or 18% IGST, under the

GST Law. However, Classification Codes for different segments or portions of the Works Contract, may be specified separately, in

the Supplies, with a final common Classification Code of Works Contract Service.

2) The Bidder is hereby conveyed that only SAC Code and Tax rate for supply of Service Works Contract i.e. 18% is relavant for

the purpose of contract since the contract is works contract and any separation in the works is for better management and

convenience purpose.

It is to state that bidders are however requested to fill the HSN code item by item for the knowledge and transparency purpose

which shall have no bearing on price or taxation payment.

SEAL & SIGNATURE Status _________________

OF BIDDER Name of bidder Company

FOR REFERENCE ONLY

Supply, Erection, Testing & Commissioning of 132kV D/C Jambuva – Itola TSS line on 132kV D/C Panther tower with ACSR Panther Conductor & 48F OPGW

cable having route length of 7.47 km for drawl of 60 MW Power by Western Railway for 132kV Itola TSS under LTOA – Deposit work thereof under Option – 1A

under Construction Division Jambuva of Jambuva circle on turnkey basis

Tender no: ACE(P&C)/Contract/E-460/TL/132kV/S&E

HSN / SAC Unit Freight, Unit

Description of Supply with Detail Specification of FOR Total Cost

code for Packing & Insurance FOR Unit Rate

Sr. No. Service Package - Works Contract Unit Quantity Unit Rate (Excl. GST)

identification Forwarding Charges in in Rs.

(SAC Code: 9954) in Rs.

only charges Rs.

A Supply of Materials

A.1 Tower Materials

A.2 ACSR Panther conductor KM 0.00 234904.00 2867.00 1229.00 239000.00 -

A.3 SR Insulators

A.3.1 132kV, 90kN Suspension SRI Nos. 122 2250.00 42.00 18.00 2310.00

A.4 Insulator hardware for ACSR Panther conductor

A.4.1 Single Suspension Nos. 108 1564.00 17.00 7.00 1588.00

A.4.3 Double Suspension Nos. 6 4413.00 34.00 15.00 4462.00

A.4.4 Double Tension Nos. 24 4945.00 51.00 22.00 5018.00

A.4.6 Mid Span Joint Nos. 34 695.00 6.00 3.00 704.00

A.4.7 Vibration Damper Nos. 564 572.00 11.00 5.00 588.00

A.4.8 Repair Sleeve Nos. 5 252.00 6.00 3.00 261.00

A.5.1 48 Fibre (DWSM) OPGW fibre Optic cable kM 7.470 195533.00 2385.00 1022.00 198940.00

HSN / SAC Unit Freight, Unit

Description of Supply with Detail Specification of FOR Total Cost

code for Packing & Insurance FOR Unit Rate

Sr. No. Service Package - Works Contract Unit Quantity Unit Rate (Excl. GST)

identification Forwarding Charges in in Rs.

(SAC Code: 9954) in Rs.

only charges Rs.

Installation Hardware set * & accessories for above

OPGW i.e. all cable fittings & accessories like

suspension clamps, tension clamps, vibration

dampers, earthing clamps, down lead clamps, in-

line splice enclosures etc. including; Pigtails FC-PC

A.5.2 a) Fibre Optic Approach Cable - kM 7.470 48279.00 644.00 276.00 49199.00

400 Mtrs - For 220KV S/S &

500 Mtrs - For 400KV S/S

(with installation hardware like ties/

clips / cleats, conduits, ducts,

supports, fittings, accessories etc).

(Any variation in quantities shall be absorbed by

TOTAL COST PART - A WITHOUT GST

Service of "Works Contracts" GST @ 18% (SAC 9954)

TOTAL COST PART - A WITH GST

SEAL & SIGNATURE

ERECTION PORTION

FOR REFERENCE ONLY

Supply, Erection, Testing & Commissioning of 132kV D/C Jambuva – Itola TSS line on 132kV D/C Panther tower with ACSR Panther Conductor & 48F

OPGW cable having route length of 7.47 km for drawl of 60 MW Power by Western Railway for 132kV Itola TSS under LTOA – Deposit work thereof

under Option – 1A under Construction Division Jambuva of Jambuva circle on turnkey basis

Tender no: ACE(P&C)/Contract/E-460/TL/132kV/S&E

Description of Supply with Detail Specification of Service code for

Sr. No. Unit Quantity Unit Rate (Excl. GST)

Package - Works Contract (SAC Code 9954) identification

B ERECTION OF LINE

The work of detail survey, preparation and submission of

profiles in 6 copies (PLSCAD as well as hardcopy),

Detail scope of Work :-

(a) Fixing of tower as per actual requirement, site condition

and plotting of line on profile having standard details i.e.

span length, lat-long (co-ordinate), chainage, weight and

wind span, all dimensions, scale, legends, tower spotting

data etc. as per requirement and along with all require

(c) Preparation and submission of tower schedule as per

standard require details with all the Major - Minor crossing

details in profile drawing and tower schedule, along with due

care of clearance as per prevailing standards i.e., for all

1 electric line with pole, all type of track, river, pond, nala, road, kM 7.470 10222

(d) Details of Right of Way in profile drawing. i.e. Building,

Temple, Well etc.

(g) Plotting line on TIKKA-MAP (Revenue Land map) -

Required TIKKA-MAP will be provided by GETCO.

Importantly, any work other than mentioned will align with the

specific requirements outlined by the Engineer-in-Charge.

Note : The survey report will be submit with sign and stamp

of the surveyor agency and engineer in charge.

Check Survey along with plotting of line route on village

(tika) map with Coordinates including detailed survey,

preparation of profiles and revision in original route

alignment, if any and as per instruction of EIC.

Excavation excluding back filling, but including shoring,

shuttering, dewatering, tree cutting for tower footings etc. for:-

a) Normal soil either dry or wet / Sandy soil Cu.m 555.71 307.00

b) Black cotton soil either dry or wet Cu.m 1072.820 614.00

c) Normal submerged/marine soil where dewatering is

d) Black cotton submerged / Marine soil where dewatering is

e) Soft Rock Cu.m 0.00 1066.00 -

f) Hard Rock Cu.m 0.00 2212.00 -

Installation of steel reinforcement in concrete foundation

including supply of GETCO Approved M.S. bars, binding

wire. Work also includes their cutting, bending, shaping and

binding with binding wire and fixing in position of TMT bars

as per drawing before the concrete work and as per

instruction of the EIC

Description of Supply with Detail Specification of Service code for

Sr. No. Unit Quantity Unit Rate (Excl. GST)

Package - Works Contract (SAC Code 9954) identification

Stub-setting with prop or template including back-filling,

during back filling dispose of excess soil and levelling of site

is to be done as per instructions of EIC but excluding

5 excavation and concreting etc. for all types of MT 23.894 8206.00

towers/extensions except special towers. (Weight of stub,

cleat & template with Bolt & Nuts of stub & template shall be

6 ---- Do ---- up to 9 to 25 mtr extension MT 4.906 9918.00

Concreting of foundation by M20/M15/M25 mixture including

shoring, shuttering, compaction, dewatering etc. for normal

tower / tower with extension upto 25mtr.

7 After completion of concrete work, curring (watering to -

concerte) is to be done as per instruction of EIC.

(Rates are inclusive of supply of GETCO approved Cement

Grounding of towers with pipe type earthing including

excavation and back filling, with supply of all materials like

8 32mm dia heavy duty 3 mtr. long G.I. Pipe, 50 x 6 mm G.I. Set. 32 8985.00

flat, GI bolt-nuts, with GI spring washer, salt, charcoal etc. as

per drawing and as per instruction of EIC.

Erection of super structure upto 6 meter extension including

tree cutting, fixing of tower accessories, attachments except

ACD /DP /NP /CIP /PP and excluding tack welding of bolts

as per instruction of EIC. This includes taking delivery of

tower materials and bolt‑nuts from GETCO’s stores etc. for

normal, extension & special towers at destination and

keeping them in safe custody and transporting the same to

Same as above but erection of 9/12/15/18/21/25 Mtr.

extension with tower.

Fixing of Anti-climbing devices including supply of barbed

11 wire as per drawing and as per instruction of EIC. Loc. 28 3011.00

Fixing of Anti-climbing devices including supply of barbed

12 wire as per drawing and as per instruction of EIC. Loc. 4 3589.00

Fixing of DP / NP / PP / CIP including supply of plates and

supply of G.I. bolt-nuts & tack welding as per drawings. (D/C)

Tack welding of nuts upto approx. 10 mtrs. height OR two

bottom-most panel from ground level at three places on the

14 Per Bolt 47000 15

nuts diametrically and applying zinc rich paint immediately

after tack welding and as per instruction of EIC.

Stringing of ACSR/ AAAC 6 (Six conductors for Double

circuit including laying, jointing, tensioning, clamping with

armour rods, hoisting of insulator string fixing of jumpers,

dampers etc. & with required tree cutting on entire length for

adequate clearances / safe charging of line, as per

instruction of EIC.

Description of Supply with Detail Specification of Service code for

Sr. No. Unit Quantity Unit Rate (Excl. GST)

Package - Works Contract (SAC Code 9954) identification

Complete Installation of OPGW cable (24/48 fibres)

including laying, providing required hardwares, in line splices

to be encased in Fibre Optic Splice Enclosures, Laying and

termination of a fibre optic approach cable required to

16 connect Overhead Fiber Optic Cable (OPGW) between the kM 7.470 97193.00

final iin line splice enclosure on the gantry/tower and the

Fibre Optec Distribution panel (FODP) to be installed within

the building at both the substation ends as per technical

Link up of OPGW Cable including all related activities as per

Work of Painting of Line name, Location No., two coat

Painting Color code of desired length and telephone no. on

Tower Leg with letter of Gujarati language using ISI marked

Paint as per instruction of EIC including Supply of paints and

other require materials.. b) All four legs - For 2 Nos. of Line

TOTAL COST PART - B, SCHEDULE - 01 WITHOUT GST

Service of "Works Contracts" GST @ 18% (SAC 9954)

TOTAL COST PART - B, SCHEDULE - 01 WITH GST

1 While calculating the weight of stub-setting, the weight of stub, cleat & templates shall also be added in stub weight

2 Red oxide & zinc rich paint shall be applied after tack welding of nuts.

3 The above rates are with supply of GETCO approved cement and steel by the contractor.

4 For concreting work, mixture machine is to be used as per site condition and as per inst. of EIC.

Tower dismantaling work should be carried out with help of using rust free spary and without cutting of any members / leg / stub and as per

inst. of EIC. , where applicable.

6 While crediting of material , agency has to submit the original gate pass copy / CR copy with required documents as per instruction of EIC

Signature of Authorized Representative

of Company / Agency

SEAL & SIGNATURE Status _________________

OF BIDDER Name of bidder Company