REPAIR AND PAINTING TO ALL TYPES OF STEEL FURNITURE AND REPAIR AND POLISHING OF ALL WOODEN FURNITURE AT AF STN TEZPUR UNDER GE (AF) TEZPUR.

Amount

WOODEN FURNITURE Chair writing (Ref drawing No. FD-250 & 280) Taking out unserviceable rail from chair writing and supply and fix for new rail made of 2nd class hard wood with suitable holes for canning complete all as specified and as shown on drawing.

Taking out unserviceable front legs from chair writing and supply and fix for new front leg made of 2nd class hard wood complete all as specified and as shown on drawing.

Taking out unserviceable rear legs from chair writing and supply and fix for new rear leg made of 2nd class hard wood complete all as specified and as shown on drawing.

Taking out unserviceable stiffeners from chair writing and supply and fix for new stiffeners made of 2nd class hard wood complete all as specified and as shown on drawing.

Taking out unserviceable arm rest from chair writing and supply and fix for new arm rest made of 2nd class hard wood complete all as specified and as shown on drawing.

Taking out unserviceable back rest from chair writing and supply and fix for new back rest made of 2nd class hard wood complete all as specified and as shown on drawing.

Material and labour for removal of old existing unserviceable cane from chair writing and recaning in Godrej pattern with plastic cane type-I (HDPE) conforming to IS: 5378-1994, 2mm to 2.5mm wide, white colour after completion of the repairing and polishing works as per the respective items in this BOQ complete all as specified and directed. Make: Arya/ Ajay/ Supreme as approved.

Taking out unserviceable shoe from chair writing and supply and fix for new PVC/ hard rubber shoe approved quality complete all as specified and directed.

Material and labour for preparation of wooden surfaces of chair writing and polishing of repaired chair writing with two or more coats of French polish upto glossy finished complete all as specified and directed. (Note: Above drawing applicable for serial item No.1 to 9)

Chair dining (Ref drawing No.FD-279 & 228): Taking out unserviceable rail from chair dining and supply and fix for new rail made of 2nd class hard wood with suitable holes for caning complete all as specified and as shown on drawing.

Taking out unserviceable front legs from chair dining and supply and fix for new front leg made of 2nd class hard wood complete all as specified and as shown on drawing.

Taking out unserviceable rear legs from chair dining and supply and fix for new rear leg made of 2nd class hard wood complete all as specified and as shown on drawing.

Taking out unserviceable side/centre stiffeners from chair dining and supply and fix for new side/centre stiffeners made of 2nd class hard wood complete all as specified and as shown on drawing.

Taking out unserviceable back rest from chair dining and supply and fix for new back rest made of 2nd class hard wood complete all as specified and as shown on drawing.

Taking out unserviceable shoe from chair dining and supply and fix for new PVC/ hard rubber shoe approved quality complete all as specified and as shown on drawing.

Material and labour for removal of old existing unserviceable cane from chair dining and recaning in Godrej pattern with plastic cane type-I (HDPE) conforming to IS: 5378-1994, 2mm to 2.5mm wide, white colour after completion of the repairing and polishing works as per the respective items in this BOQ complete all as specified and directed. Make: Arya/ Ajay/ Supreme as approved.

Material and labour for preparation of wooden surfaces of chair dining and polishing of repaired chair dining with two or more coats of French polish upto glossy finished complete all as specified and directed. (Note: Above drawing applicable for serial item No.10 to 17)

Chair easy (Ref drawing No.FD-229): Taking out unserviceable rail/ bead from chair easy and supply and fix for new rail/ bead made of 2nd class hard wood with suitable holes for caning, complete all as specified and as shown on drawing.

Taking out unserviceable front legs from chair easy and supply and fix for new legs made of 2nd class hard wood complete all as specified and as shown on drawing.

Taking out unserviceable rear legs from chair easy and supply and fix for new legs made of 2nd class hard wood complete all as specified and as shown on drawing.

Taking out unserviceable seat frame from chair easy and supply and fix for new seat frame from 2nd class hard wood section 75mm x 40mm size 510mm long in front and 480mm long in rear complete all as specified and as shown on drawing.

Taking out unserviceable back frame from chair easy and supply and fix for new back frame from 2nd class hard wood section 75mm x 40mm size 510mm long in front and 480mm long in rear complete all as specified and as shown on drawing.

Taking out unserviceable arm rest from chair easy and supply and fix for new arm rest from 2nd class hard wood of size 65mm x 25mm x 610mm complete all as specified and as shown on drawing.

Material and labour for removal of old existing unserviceable cane from chair easy and recaning (seat & back) in Godrej pattern with plastic cane type-I (HDPE) conforming to IS: 5378-1994, 2mm to 2.5mm wide, white colour after completion of the repairing and polishing works as per the respective items in this BOQ complete all as specified and directed. Make: Arya/ Ajay/ Supreme as approved.

Taking out unserviceable shoe from chair easy and and supply and fix for new PVC/ hard rubber shoe approved quality complete all as specified and as directed.

Material and labour for preparation of wooden surfaces of chair easy and polishing of repaired chair easy with two or more coats of French polish upto glossy finished complete all as specified and directed. (Note: Above drawing applicable for serial item No.18 to 26)

Bed oly top (Ref drawing No. FD-246) Taking out unserviceable long rails from bed plywood top and bottom and supply and fix for new long rails made of 2nd class hard wood complete all as specified and as shown on drawing.

Taking out unserviceable ply wood teak face and supply and fix for new 4mm thick, 3 No of ply, veneered decorative plywood, grade 1 (with BWR resin) with decirative face veneers on one face, ISI marked (IS: 1328) of size 780 x 340mm on both side of head board rest complete all as specified and as shown on drawing.

All as per serial item No.28 here-in-before but of size 780 x 180mm on both side foot boards rest complete all as specified and as shown on drawing.

Taking out unserviceable ply wood top from bed ply top and supply and fix for new 12mm thick, 7 No of ply, plywood, grade BWR, Type BB, ISI marked (IS: 303) complete all as specified and as shown on drawing. Make: Greenply/ Archidply/ Kitply as approved.

Taking out unserviceable bottom rails of bed ply wood top from bed ply top and supply and fix for new bottom rails of 2nd class hard wood or required shape and size complete all as specified and as shown on drawing.

Taking out old unserviceable legs from head board of bed ply top and supply and fix for new legs of head board made of 2nd class hard wood of required shape and size complete all as specified and as shown on drawing.

Taking out old unserviceable legs from foot board of bed ply top and supply and fix for new legs of foot board of made of 2nd class hard wood of required shape and size complete all as specified and as shown on drawing.

Taking out corner and supply and fix for new corner made out of MS flat Iron FI 25 x 5mm, bend to shape required, 90 degree angle with suitable holes for fixing from the legs/ rails, fixed with screws and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

Material and labour for preparation of wooden surfaces of bed ply top and polishing of repaired bed ply top with two or more coats of French polish upto glossy finished complete all as specified and directed. (Note: Above drawing applicable for serial item No.27 to 35)

Table dressing ledies (Refer drawing No. FD-23(M) & FD-251) Taking out carefully old existing broken top of table dressing ladies and supply and fix the same with new 18/ 19mm thick, MDF board, prelaminated one side with decorative choice lamination & other side balancing white lamination, exterior grade, ISI marked (IS:12406) with 4mm thick edging (with width equal to width of particle board) of 2nd class hard wood on exposed edges, finished with two or more coats of French polish for glossy finished complete all as specified and as shown on drawing.

Taking out carefully old existing broken bottom of table dressing ladies and supply and fix the same with new 18/ 19mm thick, MDF board, prelaminated one side with decorative choice lamination & other side balancing white lamination, exterior grade, ISI marked (IS:12406) with 4mm thick edging (with width equal to width of particle board) of 2nd class hard wood on exposed edges, finished with two or more coats of French polish for glossy finished complete all as specified and as shown on drawing.

Taking out old sliding glass shutter with aluminium sliding channel from table dressing ladies and supply and fix for new glass shutter of size 550mm x 380mm with 5.0mm thick, sheet glass, ordinary quality and aluminium anodised sliding channel complete all as specified and as shown on drawing.

Taking out old mirror from table dressing ladies and supply and fix for new mirror of size 366mm x 1220mm x 5.0mm thick, sheet glass, ordinary quality and aluminium anodised sliding channel complete all as specified and as shown on drawing.

Taking out back frame of mirror made out of 2nd class hard wood alongwith 6mm thick commercial ply wood from table dressing ladies and supply and fix for new back frame of size 45mm x 40mm made out of 2nd class hard wood, mirror frame and 6mm thick, 5 No of ply, plywoood, grade BWR, Type BB, ISI marked (IS: 303) complete all as specified and as shown on drawing.

Taking out old unserviceable drawer of table dressing ladies and supply and fix for new drawer with brass chromium plated knob complete all as specified and directed.

Taking out old unserviceable legs from table dressing ladies and supply fix for new legs made of 2nd class hard wood complete all as specified and as shown on drawing.

Taking out old unserviceable long rails of table dressing ladies and supply and fix for new long rail made of 2nd class hard wood complete all as specified and as shown on drawing.

Taking out old unserviceable side/ short rail of table dressing ladies and supply and fix for new side/ short rail made of 2nd class hard wood complete all as specified and as shown on drawing.

Taking out old unserviceable back ply wood of box from table dressing ladies and supply and fix for new 12mm thick, 7 No of ply, plywoood, grade BWR, Type BB, ISI marked (IS: 303) complete all as specified and as shown on drawing.

Material and labour for preparation of wooden surfaces of table dressing ladies and polishing of table dressing ladies with two or more coats of French polish upto glossy finished complete all as specified and directed. (Note: Above drawing applicable for serial item No.36 to 46)

Table dressing gents (Refer drawing No.FD-230 & 231) Taking out carefully old existing broken top of table dressing gents and supply and fix for new 18/ 19mm thick, MDF board, prelaminated one side with decorative choice lamination & other side balancing white lamination, exterior grade, ISI marked (IS:12406) with 4mm thick edging (with width equal to width of particle board) of 2nd class hard wood on exposed edges, finished with two or more coats of French polish for glossy finished complete all as specified and as shown on drawing. Make: Greenpanelamax/ Kitlam/ Bhutan board as appproved.

Taking out carefully old existing broken bottom of box of table dressing gents and supply and fix for new 18/ 19mm thick, MDF board, prelaminated one side with decorative choice lamination & other side balancing white lamination, exterior grade, ISI marked (IS:12406) with 4mm thick teak wood edging (with width equal to width of particle board) on exposed edges, finished with two or more coats of French polish for glossy finished complete all as specified and as shown on drawing. Make: Greenpanelamax/ Kitlam/ Bhutan board as appproved.

Taking out carefully old existing broken sides/ partition of box of table dressing gents and supply and fix for new 18/ 19mm thick, MDF board, prelaminated one side with decorative choice lamination & other side balancing white lamination, exterior grade, ISI marked (IS:12406) with 4mm thick teak wood edging (with width equal to width of particle board) on exposed edges, finished with two or more coats of French polish for glossy finished complete all as specified and as shown on drawing. Make: Greenpanelamax/ Kitlam/ Bhutan board as appproved.

Taking out old existing broken mirror from table dressing gents and supply and fix for new mirror of size 380mm x 760mm x 5.0mm thick complete all as specified and shown on drawing.

Taking out old unserviceable back frame from table dressing gents and supply and fix for new back frame of size 45mm x 40mm made of 2nd class hard wood, mirror frame and 6mm thick, 5 No of ply, plywoood, grade BWR, Type BB, ISI marked (IS: 303) complete all as specified and as shown on drawing.

Taking out old unserviceable back ply from table dressing gents and supply and fix for new back ply of size 900mm x 380mm with 12mm thick, 7 No of ply, plywoood, grade BWR, Type BB, ISI marked (IS: 303) complete all as specified and as shown on drawing.

Taking out old unserviceable drawer of table dressing gents and supply and fix for new drawer with brass chromium plated knob complete all as specified and directed.

Taking out sagged and loose dressing table gents from wall and re-fixing/ re-securing the same to wall with all accessories such as screw, clips, plugs, clamps, etc complete all as specified and directed.

Material and labour for preparation of wooden surfaces of table dressing gents and polishing of table dressing gents with two or more coats of French polish upto glossy finished complete all as specified and directed. (Note: Above drawing applicable for serial item No.47 to 55)

Table writing (Ref drawing No.FD-33, 249 & 275) Taking out existing unserviceable top from table writing and supply and fix for new 18/ 19mm thick, MDF board, prelaminated one side with decorative choice lamination & other side balancing white lamination, exterior grade, ISI marked (IS:12406) with 4mm thick teak wood edging (with width equal to width of particle board) on exposed edges, finished with two or more coats of French polish for glossy finished complete all as specified and as shown on drawing. Make: Greenpanelamax/ Kitlam/ Bhutan board as appproved.

Taking out old unserviceable ply wood and chromium plated knob from upper drawer of table writing and supply and fix for new 6mm thick, 5 No of ply, plywoood, grade BWR, Type BB, ISI marked (IS: 303) and chromium plated knobs to the upper drawer complete all as specified and as shown on drawing.

Taking out old unserviceable long stiffeners from table writing and supply and fix for new stiffeners made of 2nd class hard wood complete all as specified and as shown on drawing.

Taking out old unserviceable side stiffeners from table writing and supply and fix for new stiffeners made of 2nd class hard wood complete all as specified and as shown on drawing.

Taking out old unserviceable cabinet of table writing and supply and fix new cabinet made of 18/ 19mm thick, MDF board, prelaminated one side with decorative choice lamination & other side balancing white lamination, exterior grade, ISI marked (IS:12406) with 4mm thick teak wood edging (with width equal to width of particle board) on exposed edges, finished with two or more coats of French polish for glossy finished complete all as specified and as shown on drawing.

Taking out old unserviceable shutter from table writing and supply and fix for new shutter made of 18/ 19mm thick, MDF board, prelaminated one side with decorative choice lamination & other side balancing white lamination, exterior grade, ISI marked (IS:12406) with 4mm thick teak wood edging (with width equal to width of particle board) on exposed edges, finished with two or more coats of French polish for glossy finished complete all as specified and as shown on drawing.

Taking out unserviceable shoe from table writing and supply and fix for new PVC/ hard rubber shoe approved quality complete all as specified and directed.

Material and labour for preparation of wooden surfaces of table writing and polishing of table writing gents with two or more coats of French polish upto glossy finished complete all as specified and directed. (Note: Above drawing applicable for serial item No.56 to 63)

Side board (Ref drawing No.FD-241) Taking out old unserviceable top from side board and supply and fix for new top made of 18/ 19mm thick, MDF board, prelaminated one side with decorative choice lamination & other side balancing white lamination, exterior grade, ISI marked (IS:12406) with 4mm thick teak wood edging (with width equal to width of particle board) on exposed edges, finished with two or more coats of French polish for glossy finished complete all as specified and as shown on drawing.

Taking out old unserviceable side/ vertical partition from side board and supply and fix for new side/ partition made of 18/ 19mm thick, MDF board, prelaminated one side with decorative choice lamination & other side balancing white lamination, exterior grade, ISI marked (IS:12406) with 4mm thick teak wood edging (with width equal to width of particle board) on exposed edges, finished with two or more coats of French polish for glossy finished complete all as specified and as shown on drawing.

Taking out old unserviceable back ply wood from side board and supply and fix for new 6mm thick, 5 No of ply, plywoood, grade BWR, Type BB, ISI marked (IS: 303) complete all as specified and as shown on drawing.

Taking out old unserviceable drawer ply wood from side board and supply and fix for new 6mm thick, 5 No of ply, plywoood, grade BWR, Type BB, ISI marked (IS: 303) complete all as specified and as shown on drawing.

Taking out old unserviceable knob from drawer of side board and supply and fix for new brass chromium plated knob complete all as specified and directed.

Taking out old unserviceable shutters (measured as single unit) from cup board and supply and fix for new shutter made of 18/ 19mm thick, MDF board, prelaminated one side with decorative choice lamination & other side balancing white lamination, exterior grade, ISI marked (IS:12406) with 4mm thick teak wood edging (with width equal to width of particle board) on exposed edges, complete all as specified and as shown on drawing.

Taking out old unserviceable bottom from side board and supply and fix for new bottom made of 18/ 19mm thick, MDF board, prelaminated one side with decorative choice lamination & other side balancing white lamination, exterior grade, ISI marked (IS:12406) with 4mm thick teak wood edging (with width equal to width of particle board) on exposed edges, complete all as specified and as shown on drawing.

Taking out old unserviceable bottom frame and legs from side board and supply and fix for new bottom frame and legs made of 2nd class hard wood complete all as specified and as shown on drawing.

Material and labour for preparation of wooden surfaces of side board and polishing of side board with two or more coats of French polish upto glossy finished complete all as specified and directed. (Note: Above drawing applicable for serial item No.64 to 72)

Teapoy wooden (Ref drawing No.FD-278 & 382) Taking out old unserviceable top from teapoy and supply and fix for new top made of 18/ 19mm thick, MDF board, prelaminated one side with decorative choice lamination & other side balancing white lamination, exterior grade, ISI marked (IS:12406) with 4mm thick teak wood edging (with width equal to width of particle board) on exposed edges, complete all as specified and as shown on drawing.

Taking out old unserviceable legs from teapoy wooden and supply and fix for new legs made of 2nd class hard wood complete all as specified and as shown on drawing.

Taking out old unserviceable short rail from teapoy wooden and supply and fix for new short rail made of 2nd class hard wood complete all as specified and as shown on drawing.

Taking out old unserviceable bottom rail from teapoy wooden and supply and fix for new bottom rail made out of 2nd class hard wood complete all as specified and as shown on drawing.

Taking out unserviceable shoe from teapoy wooden and supply and fix for new PVC/ hard rubber shoe approved quality complete all as specified and directed.

Taking out old unserviceable long rail from teapoy wooden and supply and fix for new long rail made out of 2nd class hard wood complete all as specified and as shown on drawing.

Material and labour for preparation of wooden surfaces of teapoy wooden and polishing of teapoy wooden with two or more coats of French polish upto glossy finished complete all as specified and directed. (Note: Above drawing pplicable for serial item No.73 to 79)

Table centre (Ref drawing No.FD-274 & 235) Taking out old unserviceable top from table centre and supply and fix for new top made of 18/ 19mm thick, MDF board, prelaminated one side with decorative choice lamination & other side balancing white lamination, exterior grade, ISI marked (IS:12406) with 4mm thick teak wood edging (with width equal to width of particle board) on exposed edges, complete all as specified and as shown on drawing.

Taking out old unserviceable legs from table centre and supply and fix for new legs made out of 2nd class hard wood complete all as specified and as shown on drawing.

Taking out old unserviceable stiffener from table centre and supply and fix for new stiffener made out of 2nd class hard wood complete all as specified and as shown on drawing.

Taking out unserviceable shoe from table centre and supply and fix for new PVC/ hard rubber shoe approved quality complete all as specified and directed.

Material and labour for preparation of wooden surfaces of table centre and polishing of table centre with two or more coats of French polish upto glossy finished complete all as specified and directed. (Note: Above drawing applicable for serial item No.80 to 84)

Table dining 6/8 Persons (Ref drawing No.FD-273 & 30(M) Taking out old unserviceable top from table dining 8 persons and supply and fix for new top of table dining 8 persons of size 1800 x 900 x 18/ 19mm thick, MDF board, prelaminated one side with decorative choice lamination & other side balancing white lamination, exterior grade, ISI marked (IS:12406) with 4mm thick teak wood edging (with width equal to width of particle board) on exposed edges, complete all as specified and as shown on drawing.

Taking out old unserviceable leg from table dining 6/8 persons and supply and fix for new leg made out of 2nd class hard wood 25mm thick and 100mm wide complete all as specified and as shown on drawing.

Taking out old unserviceable corner from table dining 6/8 persons and supply and fix for new corner made out of 2nd class hard wood complete all as specified and as shown on drawing.

Taking out unserviceable shoe from table dining 6/8 persons and supply and fix for new PVC/ hard rubber shoe approved quality complete all as specified and directed.

Taking out old unserviceable top from table dining 6 persons and supply and fix for new top of table dining 6 persons of size 1500 x 900 x 18/ 19mm thick, MDF board, prelaminated one side with decorative choice lamination & other side balancing white lamination, exterior grade, ISI marked (IS:12406) with 4mm thick teak wood edging (with width equal to width of particle board) on exposed edges, complete all as specified and as shown on drawing.

Material and labour for preparation of wooden surfaces of table dining 6/8 persons and polishing of table centre with two or more coats of French polish upto glossy finished complete all as specified and directed. (Note: Above drawing applicable for serial item No.85 to 90)

Book case (Ref drawing No.FD-45 & 237) Taking out old unserviceable back ply wood from book case and supply and fix for new 6mm thick, 5 No of ply, plywoood, grade BWR, Type BB, ISI marked (IS: 303) complete all as specified and as shown on drawing.

Taking out old unserviceable sides/ vertical partition from book case and supply and fix for new sides/ vertical partition made of 18/ 19mm thick, MDF board, prelaminated one side with decorative choice lamination & other side balancing white lamination, exterior grade, ISI marked (IS:12406) with 4mm thick teak wood edging (with width equal to width of particle board) on exposed edges, complete all as specified and as shown on drawing.

Taking out old unserviceable top/ bottom from book case and supply and fix for new top/ bottom made of 18/ 19mm thick, MDF board, prelaminated one side with decorative choice lamination & other side balancing white lamination, exterior grade, ISI marked (IS:12406) with 4mm thick teak wood edging (with width equal to width of particle board) on exposed edges complete all as specified and as shown on drawing.

Taking out old unserviceable long horizontal shelf from book case and supply and fix for new long horizontal shelf made of 18/ 19mm thick, MDF board, prelaminated one side with decorative choice lamination & other side balancing white lamination, exterior grade, ISI marked (IS:12406) with 4mm thick teak wood edging (with width equal to width of particle board) on exposed edges complete all as specified and as shown on drawing.

Taking out old unserviceable doors and chromium plated knob from the book case and supply and fix for new doors made of 18/ 19mm thick, MDF board, prelaminated one side with decorative choice lamination & other side balancing white lamination, exterior grade, ISI marked (IS:12406) with 4mm thick teak wood edging (with width equal to width of particle board) on exposed edges complete all as specified and as shown on drawing.

Taking out old unserviceable legs from book case and supply and fix for new legs of 2nd class hard wood complete all as specified and as shown on drawing.

Material and labour for preparation of wooden surfaces of book case and polishing of book case with two or more coats of French polish upto glossy finished complete all as specified and directed. (Note: Above drawing applicable for serial item No.91 to 97)

Table bed side (Ref drawing No.248 & 276) Taking out old unserviceable top from table ded side and supply and fix for new top made of 18/ 19mm thick, MDF board, prelaminated one side with decorative choice lamination & other side balancing white lamination, exterior grade, ISI marked (IS:12406) with 4mm thick teak wood edging (with width equal to width of particle board) on exposed edges complete all as specified and as shown on drawing.

Taking out old unserviceable sides from table ded side and supply and fix for new sides made of 18/ 19mm thick, MDF board, prelaminated one side with decorative choice lamination & other side balancing white lamination, exterior grade, ISI marked (IS:12406) with 4mm thick teak wood edging (with width equal to width of particle board) on exposed edges complete all as specified and as shown on drawing.

Taking out old unserviceable bottom from table ded side and supply and fix for new bottom made of 18/ 19mm thick, MDF board, prelaminated one side with decorative choice lamination & other side balancing white lamination, exterior grade, ISI marked (IS:12406) with 4mm thick teak wood edging (with width equal to width of particle board) on exposed edges complete all as specified and as shown on drawing.

Taking out old unserviceable shelf from table ded side and supply and fix for new shelf made of 18/ 19mm thick, MDF board, prelaminated one side with decorative choice lamination & other side balancing white lamination, exterior grade, ISI marked (IS:12406) with 4mm thick teak wood edging (with width equal to width of particle board) on exposed edges complete all as specified and as shown on drawing.

Taking out old unserviceable back ply from table bed side and supply and fix for new 6mm thick, 5 No of ply, plywoood, grade BWR, Type BB, ISI marked (IS: 303) complete all as specified and as shown on drawing.

Taking out old unserviceable leg from table bed side and supply and fix for new leg made of 2nd class hard wood complete all as specified and as shown on drawing.

Material and labour for preparation of wooden surfaces of table bed side and polishing of table bed side with two or more coats of French polish upto glossy finished complete all as specified and directed. (Note: Above drawing applicable for serial item No.98 to 104)

Locker bed side wooden (Ref drawing No.FD-54 & 222) Taking out old unserviceable shutter from locker (one shutter measured as single unit) and supply and fix for new shutter made of 18/ 19mm thick, 11 No of ply, plywood, grade BWR, Type BB, ISI marked (IS: 303, hung with 2 Nos of MS butt hinges, medium grade 75mm size, 01 No. of 100mm aluminium anodised handle incuding 4mm thick teak wood edging all round the shutter complete all as specified and as shown on drawing.

Taking out old unserviceable back ply wood from locker and supply and fix for new back made of 6mm thick, 5 No. of ply, plywood, grade BWR, Type BB, ISI marked (IS: 303), fixed with screwes complete all as specified and as shown on drawing.

Taking out old unserviceable haps and staple from locker and Supply and fix for new haps and staple fixed with suitable size of screws, complete all as specified and as shown on drawing.

Taking out old unserviceable legs with bottom frame from locker bed side and supply and fix for new legs and bottom frame made of 2nd class hard wood complete all as specified and as shown on drawing.

Material and labour for preparation of wooden surfaces of locker bed side and polishing of locker bed side with two or more coats of French polish upto glossy finished complete all as specified and directed. (Note: Above drawing applicable for serial item No.105 to 109)

Table 3' x 2' with/ without drawer: (Ref drawing No.FD-283, 284 & 55) Taking out old existing unserviceable top from table 3' x 2' with/ without drawer and supply and fix for new top of size 900 x 600 x 18/ 19 mm thick, MDF board, prelaminated one side with decorative choice lamination & other side balancing white lamination, exterior grade, ISI marked (IS:12406) with 4mm thick teak wood edging (with width equal to width of particle board) on exposed edges complete all as specified and as shown on drawing. Make: Greenpanelamax/ Kitlam/ Bhutan board as approved.

Taking out old unservicable legs from table 3'x2' with/without drawer and supply and fix for new legs made of 2nd class hard wood complete all as specified and as shown on drg.

Taking out old unserviceable drawer from table 3' x 2' with drawer and supply and fix for new drawer made of 2nd class hard wood and 6mm thick, 5 No. of ply, plywood, grade BWR, Type BB, ISI marked (IS: 303), including chromium plated knob complete all as specified and as shown on drawing.

Taking out old unservicable stiffener from table 3'x2' with/without drawer and supply and fix for new stiffener made of 2nd class hard wood complete all as specified and as shown on drg.

Taking out old unserviceable shoe from table 3'x2' with/without drawer and supply and fix for new PVC/ hard rubber shoe complete all as specified and shown on drawing.

Taking out old unserviceable MS flat and supply and fix for new MS flat in 'L' shape 150 x 30 x 5mm thick with suitable holes to fix with legs and rails and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

Material and labour for preparation of wooden surfaces of table 3'x2' with/ without drawer and polishing of table 3'x2' with/ without drawer with two or more coats of French polish upto glossy finished complete all as specified and directed. (Note: Above drawing applicable for serial item No.110 to 116)

Table wooden 3'x3' (Ref drawing No.FD-291 & 88) Taking out old existing unserviceable top from table 3'x3' and supply and fix for new top of size 900 x 900 x 18/ 19 mm thick, MDF board, prelaminated one side with decorative choice lamination & other side balancing white lamination, exterior grade, ISI marked (IS:12406) with 4mm thick teak wood edging (with width equal to width of particle board) on exposed edges complete all as specified and as shown on drawing. Make: Greenpanelamax/ Kitlam/ Bhutan board as approved.

Taking out old unservicable legs from table 3'x3' and supply and fix for new legs made of 2nd class hard wood complete all as specified and as shown on drg.

Taking out old unserviceable shoe from table 3'x3' and supply and fix for new PVC/ hard rubber shoe approved quality complete all as specified and directed.

Taking out old unserviceable corner from table 3'x3' and supply and fix for new corner of 150mm long made out of MS flat 30 x 5mm thick in 'L' shape with suitable holes to fix with legs and rails and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

Material and labour for preparation of wooden surfaces of table 3'x3 and polishing of table 3'x3' with two or more coats of French polish upto glossy finished complete all as specified and directed. (Note: Above drawing applicable for serial item No.117 to 121)

Sofa set 3 seater/ single seater (Ref drawing No.FD-281) Taking out old unservicable legs from sofa set 3 seater/single seater front or rear legs and supply and fix for new legs made out of 2nd class hard wood complete all as specified and as shown on drawing.

Taking out old unservicable battens seat and back from sofa set 3 seater/ single seater and supply and fix for new batten made out of 2nd class hard wood complete all as specified and as shown on drawing.

Taking out old unservicable side rails from sofa set 3 seater/ single seater and supply and fix for new rails made out of 2nd class hard wood complete all as specified and as shown on drawing.

Material and labour for preparation of wooden surfaces of sofa 3 seaters and polishing with two or more coats of French polish upto glossy finished complete all as specified and directed.

Material and labour for preparation of wooden surfaces of sofa single seater and polishing of sofa single seater with two or more coats of French polish upto glossy finished complete all as specified and directed. (Above drawing applicable for serial item No.122 to 126)

Hat stand with looking mirror (Ref drawing No.FD-233) Taking out old unserviceable looking mirror from hat stand with mirror and supply and fix for new mirror 5mm thick of approved quality duly fixed with well seasoned 1st class teak wood beading, complete all as specified and as shown on drawing.

Taking out old unserviceable brass peg from hat stand with mirror and supply and fix for new brass peg approved quality duly fixed with Screw, complete all as specified and as shown on drawing.

Taking out unserviceable back side ply from hat stand with mirror and supply and fix for new 4mm thick, 3 No of ply, plywood, grade BWR, type BB, ISI marked (IS: 303) complete all as specified and as shown on drawing.

Taking out old unserviceable front side teak face ply from hat stand with mirror and supply and fix for new teak face ply 4 mm thick, 3 No. of ply, veneered decirative plywood, grade 1 (with BWR resin ) with decorative face veneereds on one face, ISI marked (IS: 1328) fixed with head tess nail, complete all as specified and shown on drawing.

Taking out old unserviceable beading from hat stand with mirror and supply and fix for new beading made of 1st class hard wood( teak) of size 35 x 6mm all round, complete all as specified and as shown on drawing.

Material and labour for preparation of wooden surfaces of hat stand with mirror and polishing of hat stand with mirror with two or more coats of French polish upto glossy finished complete all as specified and directed. (Note: Above drawing applicable for serial item No.127 to 132)

Peg table (Ref drawing No.FD-236 & 277) Taking out old existing unserviceable top from peg table and supply and fix for new top made of MDF board, prelaminated one side with decorative choice lamination & other side balancing white lamination, exterior grade, ISI marked (IS:12406) with 4mm thick teak wood edging (with width equal to width of particle board) on exposed edges complete all as specified and as shown on drawing. Make: Greenpanelamax/ Kitlam/ Bhutan board as appproved.

Taking out old unservicable legs from peg table and supply and fix for new legs made of 2nd class hard wood complete all as specified and as shown on drg.

Taking out old unservicable short rail from peg table and supply and fix for new short rail made of 2nd class hard wood complete all as specified and as shown on drg.

Taking out old unservicable long rail from peg table and supply and fix for new long rail made of 2nd class hard wood complete all as specified and as shown on drg.

Taking out unserviceable shoe from peg table and supply and fix for new PVC/ hard rubber shoe approved quality complete all as specified and directed.

Material and labour for preparation of wooden surfaces of peg table and polishing of peg table with two or more coats of French polish upto glossy finished complete all as specified and directed. (Note: Above drawing applicable for serial item No.133 to 138)

Chair dining officers (Ref drawing No.FD-FD/MAP-II/04) Taking out unserviceable ply from seat of chair dining officers and supply and fix for new 12mm thick, 7 No of ply, plywood, grade BWR, type BB, ISI marked (IS: 303) complete all as specified and as shown on drawing.

Taking out old unservicable back stiffener from chair dining officer and supply and fix for new stiffener made of 2nd class hard wood complete all as specified and as shown on drg.

Taking out old unservicable rear legs from chair dining officer and supply and fix for new rear legs made of 2nd class hard wood complete all as specified and as shown on drg.

Taking out old unservicable front legs from chair dining officer and supply and fix for new front legs made of 2nd class hard wood complete all as specified and as shown on drg.

Taking out old unserviceable foam from chair dining officers and supply and fix for new foam with fabric on seat of 75mm thick 40 density complete all as specified and directed. Make: Kurlon/ Sleepwell as approved.

Covers for foam as in item No.143 here-in-before made out of tapestry cloth not less than Rs 240/- per metre as approved by GE perfectly fitting the foams a covering/uncovering the cushion and complete all as specified and directed.

Taking out unserviceable shoe from chair dining officers and supply and fix for new PVC/ hard rubber shoe approved quality complete all as specified and directed.

Material and labour for preparation of wooden surfaces of chair dining officers and polishing of chair dining officers with two or more coats of French polish upto glossy finished complete all as specified and directed. (Note: Above drawing applicable for serial item No.139 to 146)

Cushion for Sofa Set (Ref drawing No.FD-229) Taking out old unserviceable cushion foam from sofa set and supply and fix for new cushion foam of 100mm thick, 40 density complete all as specified and directed. Make: Kurlon/ Sleepwell/Dunlop as approved.

Covers for cushions as in item No.147 here-in-before made out of tapestry cloth not less than Rs 240/- per metre as approved by GE perfectly fitting the cushions and duly fitted with zipper to secure the covering/uncovering the cushion and complete all as specified and directed. (Note: Above drawing applicable for serial item No.147 & 148)

STEEL FURNITURE Chair writing & chair visitors (Ref drawing No.FD/E6/MAP/12 & TP) Removing unserviceable seat and supply and fix for new seat of 12 mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam, the seat foam shall be designed with contour lumber support with PVC lipping all around. The cushions shall be of 40 density, 75mm thick along with the fabric of approved quality and colour complete all as specified ans as directed.

All as per serial item No.149.00 here-in-before but for back of chair.

Removing unserviceable hand rest and supply and fix for new hand rest replacing the old matching the previous shape, size, material and quality complete all as specified and directed.

Removing unserviceable rubber stoppers and supply and fix for new rubber stoppers as approved complete all as specified and directed.

Material and labour for applying one coat of synthetic enamel paint of black colour all over the steel table by applying with spray gun after properly smoothening the surface with the help of an electric grinder, applying putty on dents complete all as specified and directed. (Note:- Above drawing applcable for Srl item No 149 to 153 here-in-before).

Almirah large steel with shelve (Ref drawing No.FD-1031 & FD-67(M) Removing unserviceable shelve and supply and fix for new shelve with appropriate nuts and bolts complete all as specified and directed.

Removing unserviceable lock and supply and fix for new lock, 6 levers Godrej pattern of steel with duplicate key and hole cover. The keys and lock shall have embedded similar numbers for identification complete all as specified and directed.

Removing unserviceable steel chromium plated handle and supply and fix for new steel chromium plated handle 125mm size approved quality completed all as specified and directed.

Removing unserviceable locking assembly with cover and supply and fix for new locking assembly with cover duly painted complete all as specified and directed.

Removing unserviceable hanging rod and supply and fix for new hanging rod 20 mm dia, 1.6mm thick CP steel conduit pipe with sockets complete all as specified directed.

Removing unserviceable bottom base from Almirah large steel and supply and fix for new bottom base made out of 1mm thick MS sheet complete all as specified and directed.

Adjustment of the existing shelves of Almirah large steel by providing new clamps including removing unserviceable clamps complete all as directed.

Removing of existing unserviceable hinges from Almirah large steel and supply and fix for new hinges medium weight, cold rolled mild steel of size 75mm complete all as specified and directed.

Removing unserviceable leg and supply and fix for new leg made out of 1mm thick MS sheet complete all as specified and directed.

Removing of existing unserviceable shutter from Almirah large steel and supply and fix for new shutter made out of 1mm thick MS sheet complete all as specified directed.

Material and labour for denting of Almirah large steel and applying two coats of synthetic enamel paint of black/ Oilve Green/ Smoke colour as specified both internally and externally by applying with spray gun after properly smoothening the surface with the help of an electric grinder, applying putty on dents complete all as specified and directed. (Note:- Above drawing applcable for Srl item No 154 to 164 here-in-before).

Almirah medium steel with shelve (Ref drawing No.FD-1032) Removing unserviceable shelve and supply and fix for new shelve with appropriate nuts and bolts complete all as specified and directed.

Removing unserviceable lock and supply and fix for new lock, 6 levers Godrej pattern of steel with duplicate key and hole cover. The keys and lock shall have embedded similar numbers for identification complete all as specified and directed.

Removing unserviceable steel chromium plated handle and supply and fix for new steel chromium plated handle 125mm size approved quality completed all as specified and directed.

Removing unserviceable locking assembly with cover and supply and fix for new locking assembly with cover duly painted complete all as specified and directed.

Removing unserviceable bottom base from Almirah medium steel and supply and fix for new bottom base made out of 1mm thick MS sheet complete all as specified and directed.

Adjustment of the existing shelves of Almirah mediumsteel by providing new clamps including removing unserviceable clamps complete all as directed.

Removing of existing unserviceable hinges from Almirah medium steel and supply and fix for new hinges medium weight, cold rolled mild steel of size 75mm complete all as specified and directed.

Removing unserviceable legs and supply and fix for new legs made out of 1mm thick MS sheet complete all as specified and directed.

Removing of existing unserviceable shutter from Almirah medium steel and supply and fix for new shutter made out of 1mm thick MS sheet complete all as specified directed.

Material and labour for denting of Almirah medium and applying two coats of synthetic enamel paint of black/ Oilve Green/ Smoke colour as specified both internally and externally by applying with spray gun after properly smoothening the surface with the help of an electric grinder, applying putty on dents complete all as specified and directed. (Note:- Above drawing applcable for serial item No 165 to 174 here-in-before).

Chair school with hand board (Ref drawing No.FD/E6/MAP/05) Removing unserviceable PVC "seat and back" and suupply and fix for new "seat and back" (Blow Plast or Equivalent) be provided to frame of chair school with hand board rest complete all as specified and directed.

Removing of existing unserviceable hand board from chair school WHB and Supply and fix for for new hand board made of 18/19 mm thick MDF board, prelaminated particle board top openable with 6mm teak wood beading (hinged on RHS) screwed to 25mm hollow steel pipe inserted in 20mm MS rod welded to frame complete all as specified and directed.

Repairing the broken or damaged wired frame of 3mm dia wired basket (all as per drawing) joined in four corners of the chair school to be repaired with proper spot welding at 4 points of the legs, all the weling portion should be proper painted with spray painting of required colour complete all as specified and directed.

Taking out unserviceable shoe from chair school and supply and fix for new PVC/ hard rubber shoe of approved quality complete all as specified and directed.

Material and labour for applying two coats of synthetic enamel black colour of approved quality paint over a coat of red oxide zinc chrome primer after welding (as per requirement) the frame of the chair school with hand board MAP after scrapping off the existing worn out paint with an electric grinder complete all as specified and directed. (Note:- Above drawing applcable for serial item No 175 to 179 here-in-before).

Teapoy verandah (Ref drawing No.FD-35 & 255) Removing of existing unserviceable leg 'U' type from teapoy verandah and supply and fix for new legs made of MS conduit pipe 20mm dia of 1.6mm thick complete all as specified and directed.

Removing of existing unserviceable rail from teapoy verandah and supply and fix for new rail or flat iron of size 25x3 mm complete all as specified and directed.

Removing of existing unserviceable top from teapoy verandah and supply and fix for new top made out of 18 mm thick prelaminated MDF board exterior grade of shape and size with 6mm thick teak wood beading complete complete all as specified and directed.

Material and labour for preparation of old painted steel surfaces of teapoy verandah and applying one coat of synthetic enamel paint complete all as specified and directed. (Note:- Above drawings applcable for serial item No 180 to 183 here-in-before).

Table office clerk steel (Ref drawing No. FD-1004 & 84(M) Removing unserviceable top and supply and fix for new top of prelaminated MDF board 18mm thick exterior grade both side lamination, shade as approved by GE, with PVC edging matching the colour of the top complete all as specified and directed.

Removing unserviceable drawer and supply and fix for new drawer steel complete all as specified and as shown on drawing.

Removing of existing unserviceable lock of drawer from table office clerk steel and supply and fix for new locks of drawer 4 lever complete all as specified and directed.

Removing unserviceable shoe and supply and fix for new hard rubber shoe to legs complete all as specified and directed.

Material and labour for applying one coat of synthetic enamel paint of black/ olive green colour over all steel table by applying with spray gun after properly smoothening the surface with the help of an electric grinder, applying putty on dents complete all as specified and directed. (Note:- Above drawings applcable for serial item No 184 to 188 here-in-before).

Table office officer steel (Ref drawing No. FD-1003 & (84)/84M) Removing unserviceable top and supply and fix for new top of prelaminated MDF board 19mm thick exterior grade both side lamination, shade as approved by GE, 4mm teak wood beading all round the table complete all as specified and directed.

Removing unserviceable drawer and cabinet and supply and fix for new drawer and cabinet steel complete all as specified and as shown on drawing.

Removing of existing unserviceable lock of drawer from table office officers steel and supply and fix for new lock of drawer 4 lever complete all as specified and directed.

Removing unserviceable shoe and supply and fix for new hard rubber shoe to legs complete all as specified and directed.

Material and labour for applying one coat of synthetic enamel paint of black colour all over steel table by applying with spray gun after properly smoothening the surface with the help of an electric grinder, applying putty on dents complete all as specified and directed. (Note:- Above drawings applcable for serial item No 189 to 193 here-in-before).

Locker bedside steel (Ref drawing No. :FD-257 & 1024): Removing unserviceable hasp & staples and supply and fix for supply and fix for new hasp & staples 75mm long complete all as specified and as shown on drawing.

Removing unserviceable MS steel CP handle and supply and fix for new MS steel CP handle 100mm long complete all as specified and as shown on drawing.

Removing unserviceable CP steel conduit and supply and fix for new CP steel conduit 20mm dia hanging rod with brackets16 guage complete all as specified and as shown on drawing.

Removing of existing unserviceable hinges from locker bed side and supply and fix for new hinges medium weight, cold rolled mild steel of size 75mm complete all as specified and as shown on drawing.

Removing unserviceable leg locker bed side steel and supply and fix for new leg made out of 1mm thick MS sheet complete all as directed and as shown on drawing.

Removing of existing unserviceable shutter form locker bed side steel and supply and fix for new shutter made out of 1mm thick MS sheet complete all as specified and as shown on drawing.

Taking out unserviceable bottom base from locker bed side steel and supply and fix for new bottom base made out of 1mm thick MS sheet complete all as specified and as shown on drawing.

Removing unserviceable shelve and supply and fix for new shelve complete all as specified and as shown on drawing.

Material and labour for denting of locker and applying one coat of synthetic enamel paint olive green colour after preperation of surface by cleaning and smoothening with electric grinder and applying putty where necessity complete all as specified and directed. (Note:- Above drawings applcable for serial item No 194 to 202 here-in-before).

Chair computer, chair revolving executive (high/ low back), chair revolving with arms (Ref drawing No. FD/E6/MAP/01 & TP) Removing unserviceable seat and supply and fix for new seat of 12 mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam. The seat foam shall be designed with contour lumber support with PVC lipping all around, the cushions shall be of 40 density, 75mm thick along with the fabric of approved quality and colour complete all as specified and shaown on drawing.

All as per serial item No.203.00 here-in-before but for back of chair.

Removing unserviceable castor wheels and supply and fix for new castor wheels as per the approved sample complete all as directed.

Removing unserviceable hand rest and supply and fix for new hand rest, matching the previous all in shape, size, material and quality and complete all as directed.

Removing unserviceable pedestal assembly and supply and fix for new pedestal assembly, matching the previous all in shape, size, material and quality and complete all as directed.

Removing unserviceable synchro tilting mechanism and replacing with new synchro tilting mechanism complete all as specified and as directed.

Material and labour for servicing the gas lift mechanism and making the seat adjustment functional complete all as specified and directed. (Note:- Above drawings applcable for serial item No.203 to 209 here-in-before).

Chair verandah (Ref drawing No. FD-333, 256 and MAP/06) Material and labour for recanning the chair with plastic cane 3.5 mm to 4mm wide, 0.4 mm thick half round, pure white colour, (Matt pattern) complete all as specified and dfirected. (Note (i) Canning shall be done after painting of chair)

Removing unserviceable shoes and supply and fix for new PVC shoes to legs complete all as specified and directed.

Removing unserviceable seat and back and supply and fix for new 4mm thick PVC seat and back to frame of chair verandah complete all as specified and directed. (Note:- Weight of "seat and back" is not less than 1.85 Kg each).

Material and labour for applying two coats of synthetic enamel paint, white of approved quality over a coat of red oxide zinc chrome primer before welding (as per requirement) the frame of the chair verandah/ chair verandah MAP after scrapping off the existing worn out paint with an electric grinder complete all as specified and directed. (Note:- Above drawings applcable for serial item No.210 to 213 here-in-before).

Table computer (Ref drawing No. FD/E6/MAP/03 & TP): Removing unserviceable top and supply and fix for new top of prelaminated MDF board 18mm thick exterior grade both side lamination in shape as approved by GE with 4mm thick teak wood beading duly polished and sunmica pasted matching the colour of the top as per required complete all as specified and directed.

Removing unserviceable key board tray and supply and fix for new key board tray18mm thick prelaminated MDF board (450x480mm) on telescopic channel complete all as specified and as shown on drawing.

Removing unserviceable drawer and supply and fix for new drawer 18mm thick prelaminated MDF board 75mm deep on telescopic channel complete all as specified and as shown on drawing.

Removing unserviceable shoes and supply and fix for new hard rubber shoes to legs complete all as specified and directed.

Material and labour for applying two coats of synthetic enamel black colour of approved quality paint over a coat of red oxide zinc chrome primer after welding (as per requirement) the frame of the table computer after scrapping off the existing worn out paint with an electric grinder complete all as specified and directed. (Note:- Above drawing applcable for serial item No 214 to 218 here-in-before).

Rack shoe steel (Ref drawing No. FD/E6/MAP/02(R): Material and labour for applying two coats of synthetic enamel paint black colour of apprved quality over a coat of red oxide zinc chrome primer after welding (as per requirement) the shoe rack steel after scrapping off the existing worn out paint with an electric grinder complete all as specified and directed.

Removing unserviceable shoes and supply and fix for new hard rubber shoes to legs complete all as specified and directed. (Note:- Above drawings applcable for serial item No.219 to 220 here-in-before).

Rack steel (Ref drawing No. FD-1038) Adjustment of the existing shelves from rack steel by providing new nuts & bolts as per required including removing unserviceable nuts & bolts complete all as specified and directed.

Material and labour for applying two coats of synthetic enamel paint of olive green colour of approved quality over a coat of red oxide zinc chrome primer before welding (as per requirement) the rack steel after scrapping off the existing worn out paint with an electric grinder complete all as specified and directed. (Note:- Above drawing applcable for serial item No.221 and 222 here-in-before).

Charpoy square tubular/ bed hard (Ref drawing No. MAP FD-220(R) & FD/E6/ MAP/ 08(R): Taking out unserviceable plywood top from charpoy square tubular/ bed hard MAP and supply and fix for new plywood 12mm thick plywood BWR grade, Type BB, 7 No. of ply ISI marked (IS: 303) of required size of MS rectangular pipe in charpoy as per shown on drawing and complete all as directed.

Taking out unserviceable head board/ foot board from bed hard MAP and supply and fix for new head board/ foot board made out of 18 mm prelaminated MDF board exterior grade complete all as per shown on drawing and as directed.

Taking out unserviceable stiffeners from bed hard MAP & charpoy square tubular and supply and fix for new stiffeners made of 2nd class hard wood complete all as specified and as shown on drawing.

Material and labour for preparation of old painted steel surfaces charpoy tubular/ bed hard MAP and applying one coat of synthetic enamel paint complete all as specified and as directed.

Taking out old unserviceable rubber shoes from bed hard and supply and fix for new rubber shoes approved quality conplete all as specified and as directed. (Note:- Above drawing applcable for serial item No.223 to 227 here-in-before).

Charpoy GI with ply top (Refer Drawing No FD-220): Taking out existing unserviceable 3 way elbow from charpoy GI ply top and supply and fix for new 32mm bore galvanized mild steel tubular and other wrought steel elbow side outlet equal (3 way elbow), ISI marked (IS 1239 Part 2) suitable for fixing to GI short rail, long rail and legs of GI charpoy complete all as specified and directed.

Taking out unserviceable FI stiffener from charpoy GI ply top and supply and fix ffor new stiffener made out of flat iron 25 x 5 mm thick (approx 1 metre long) and fixed to long rail with mild steel chromium plated nut & bolt not less than 8mm dia. including drilling holes in stiffener and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer after preparation of steel surfaces complete all as specified and as directed.

Taking out existing unserviceable check nut and supply and fixing for new 6mm thick GI check nut, 32mm size and fixing the same in position complete all as specified and as directed

Taking out existing unserviceable long rail from charpoy GI and supply and fix for new long rail made out of 32 mm bore galvanised steel tubing, medium grade, complete all as specified and as directed. Make: Tata/Jindal/Praksh/Surya as approved.

Taking out existing unserviceable short rail from the charpoy and converting of the long rail into short rail by cutting/ finishing to size required including threading and replacing the same against unserviceable short rail, complete all as specified and as directed.

Taking out existing unserviceable legs from the charpoy and converting of the short rail into legs by cutting/ finishing to size required including threading and replacing the same against unserviceable legs complete all as specified and as directed.

Taking out existing unserviceable plywood top from charpoy GI ply top and supply and fix for new 12 mm thick, 7 No of ply, plylywood, grade BWR,Type BB, ISI marked (IS:303) complete all as specified and as per shown on drawing. (Note:- Above drawing applcable for serial item No.228 and 234 here-in-before).

Charpoy Folding IP with Hard Top (Refer Drawing No: FD-388(R)) Taking out existing unserviceable plywood top from charpoy Folding IP with hard top and supply and fix for new 12 mm thick, 7 No of ply, plylywood, grade BWR,Type BB, ISI marked (IS:303) complete all as specified and as per shown on drawing.

Taking out old unserviceable rubber shoes from charpoy Folding IP with hard top and supply and fix for new rubber shoes of approved quality conplete all as specified and as directed.

Material and labour for preparation of old painted steel surfaces of charpoy Folding IP with hard top and applying one coat of synthetic enamel paint complete all as specified and as directed.

Material and labour for, running welding in repairs, size exc. 2.5cm and not exc 5cm in length and thickness of metal to be welded not exc. 6mm thick, complete all as specified and directed. (Note:- Above drawing applcable for serial item No.235 and 238 here-in-before).

Evergreen Firm (BID ID -3075226)