Renovation to E.I.,Switchgear and Compound Light in Prant Office Kutiyana, Dist. Porbandar

NAME OF WORK :-Renovation to E.I.,Switchgear and Compound Light in Prant Office Kutiyana, Dist. Porbandar

QTY. UNIT RATE TOTAL

Replacing old & U/s by new Point wiring for Tissino / Modular

secondary light point with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multi strand copper wires, in below type of pipe to be erected

complete with earth continuity and necessary connection with primary

1 light with accessories erected on Metal / PVC / wooden box covered 3.00 pt 132.31

with 3 mm thick PC(Polycarbonate) / Acrylic sheet for open /

concealed wiring. with necessary Lamp holder / ceiling rose /

H.D.Connector as directed. (a) with medium class Rigid PVC pipe and

accessories erected flushed on wall/ceiling complete

Replacing old & U/s by new Point wiring for Light / Bell with 2-1.5

sq.mm & earth wire of 1.5 sq.mm (Green) both are of ISI marked

KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr

length , in below type of pipe erected with 6A Modular type switch /

bell push & accessories and earth continuity of following type, erected

2 on PVC / Metallic/Wooden box, single mounting base frame covered 11.00 pt 375.72

with textured/metallic/white front plate modules erected on / in wall /

ceiling as per pipe erected, with necessary Lamp holder/ceiling rose /

H.D.Connector as directed. (e) in existing pipe erected flushed on

wall/ceiling complete Cat III

Replacing old & U/s by new Point wiring for FAN with 2-1.5 sq.mm

& earth wire of 1.5 sq.mm (Green) both are of .ISI marked 1.1 KV

Grade FRLS PVC insulated multi strand copper wires up to 10 mtr

length, in below type of pipe erected with 6A Modular type switch

and hum free EME step type electronic fan regulator mounted and

accessories with earth continuity of following type erected on PVC /

3 Metallic/Wooden box, single mounting base frame covered with 4.00 pt 522.17

textured/metallic/white front plate modules erected on / in wall /

ceiling as per pipe erected. with necessary ceiling rose / H.D.Connector

as directed.(e) in existing pipe erected flushed on wall/ceiling complete

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length, in below type of pipe

erected complete with Modular type switch & 5 pin Plug erected on

PVC / Metallic/Wooden box covered with appropriate front plate

4 modules erected on / in wall / ceiling as per pipe erected with following 4.00 pt 711.04

type of accessories. [II] For 16A Plug and 16 amp switch with 2-2.5

sq.mm Cu. Wire from mcb db board. (a) with medium class Rigid PVC

pipe and accessories erected flushed on wall/ceiling complete Cat. III

Replacing old & U/s by new Point wiring for on board Looped Plug

with 6A Modular type switch & 5 pin socket erected on PVC /

Metallic/Wooden box, single mounting base frame covered with

5 textured / metallic/white front plate modules erected on / in wall / 6.00 pt 257.55

ceiling with following type accessories Cat III

Replacing old & U/s by new Providing & erecting following type of

Modular Type Accessories with necessary connection. As desired by

Engineer In charge (1) 6 Amp. SP one way switch

6b (4) 6 A socket 25.00 Ea 42.42

6c (2) 16 Amp. SP one way switch 18.00 Ea 51.51

6d (3) 6/16Amp. Universal socket 18.00 Ea 82.82

6e (5) LAN cable connector with ferule 15.00 Ea 36.36

Providing and erecting ISI mark Medium class RIGID PVC PIPES of

following size complete to be erected on/in wall or ceiling erected with

7 necessary PVC fittings & Junction boxes fixed with adhesive solution 20.00 Mtr 24.24

& Clamps with following dia of pipes, in approved manner as directed

Supplying and laying UPVC cable trunking system comprising

unplasticised polyvinyl, chloride rigid material with ignition free and

flame proof confirming BS with necessary end caps Internal and

8 external bend, flat bends, coupler, tee etc..All necessary accessories 65.00 Mtr 277.75

and measuring of following sizes (1) 75 mm x 50 mm trunking

Replacing old & U/s by new Providing and erecting Mains with

KV grade FRLS PVC insulated ISI marked stranded Copper conductor

wire in following type of pipe to be erected concealed in /flushed on

wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated

9 stranded wire of green colour for earth continuity of following size (A) 592.00 Mtr 82.82

With medium class Rigid PVC pipe and accessories (b) 2 wire 2.5 sq.

mm (OLD-60 MTR)

9b (a) 2 wire 1.5 sq. mm 40.00 Mtr 62.62

Replacing old & U/s by new providing and erecting Mains with 1.1 KV

grade FRLS PVC insulated ISI marked stranded Copper conductor

wire in following type of pipe to be erected in / on wall / ceiling with

10 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of 90.00 Mtr 112.11

green colour for earth continuity of following size (A) with medium

class Rigid PVC pipe and accessories (a) 2 wire 4 sq. mm OLD-30

10b (i) 4 wire 10 sq. mm OLD-15 MTR) 35.00 Mtr 425.21

providing and erecting Mains with ISI marked, 1.5KV grade electrolyte

multi stranded, annealed copper conductor with heat resistant PVC

insulated conforms to IS 694, IEC - 227 erected in existing pipe of

11 following size (Specifically for control panel, relays, power 25.00 Mtr 56.56

switchgears, motor starters & control wiring) with required size of

copper lugs, nuts and bolts if required. (e) One wire 6.00 sq. mm

11b (f) One wire 10.00 sq. mm 32.00 Mtr 91.91

11c (i) One wire 35.00 sq. mm 12.00 Mtr 300.98

Supplying & erecting approved make LAN cable of following size in

existing pipe as per direction [D] CAT - 6 e

Providing & erecting Switch board for Computer or electric apparatus

consisting of following modular type accessories mounted with PVC

/ Metallic concealed/open box with single mounting base frame

covered with textured/metallic /white front plate,modules erected with

13 necessary connections as directed 17.00 Ea 1133.22

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug For Modular Type Accessories Cat III

Decorative call bell Ting-tong box type 250 volts complete erected

Replacing old & U/s by new Supplying and erecting LED indoor

fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single

MCPCB, with housing used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA/ aluminium die cast powder coated

and high U.V. & corrosion resistance with diffuser with company

mark/name 160V to 270V, Power Factor more than 0.95, THD <

15%,CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt

15 ,LED LED driver efficiency > 85 %( fitting required LM-79 & LM-80 61.00 Ea 373.70

Certificates)(NOTE: Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.) (iv) 22-24 Watts, Surge - 2KV,IP-

20, conventional 4 feet Cat III

Supplying and erecting led lamps with following wattage capacity of

220 to 240 voltage, minimum 15000 burning hours life, 500 V in built-

surge protection,Polycarbonate diffuser, mounting suitable for E14 /

16 E27 / B22 lamp holders, pf >= 0.5 (A) LED Lamps integral type, with 3.00 Ea 188.87

PC diffuser suitable LAMP holder (iii) 10 to 15 watts Cat-III

Replacing old & U/s by new Supplying and erecting LED indoor

fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single

MCPCB, with housing used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA/aluminium pressure die cast

powder coated and high U.V. & corrosion resistance with diffuser

housed in aluminium casted body with company mark/name 160V to

270V,Power Factor more than 0.95, THD < 15 %,CCT 3000 K to

17 Luminaire efficacy> 85 lumens/watt ,LED driver efficiency > 85 %( 3.00 Ea 758.51

fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity between the ranges

shown.)(A) Square/ Circular shaped Surface/Recessed Mount

Downlight with provision for spring loaded mounting clips

complete.IP20 (iv) 22-24 watts, Surge-2 KV Cat-III

(B) LED Panel Light with provision for Plane front frame with

17b translucent cover fixed to housing complete.IP20 (vi) 36 watts, 24" x 14.00 Ea 1794.77

24", Surge- 2KV Cat-lll

Supplying and erecting LED street light / Flood light fittings with High

power White LEDs wattage of 3 Watt and above assembled on single

MCPCB, efficiency more than 130 lm/w and corrosion free High

pressure die cast aluminum housing with smooth finish powder coated

and heat sink extruded aluminium with diffuser and Polycarbonate

optics/ lenses, with toughened glass with company mark/name

engraved or embossed 160 to 270 V,Power Factor more than 0.95,

THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45,

18 Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 %.( 4.00 Ea 4997.48

fittings required LM-79 & LM-80 certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity between the ranges

shown.) (A) Street Light (IP-65), Surge protection -4KV integral and

,Light must have 440VAC line supply with over-voltage protection. (ii)

60 Watts Cat-lll

(B) Flood Light (IP-65), Surge protection -4KV integral and ,Light

18b must have 440VAC line supply with over-voltage protection. (ii) 60 7.00 Ea 5599.44

(C) Post Top Lantern LED fitting comprises of finish cast aluminum

spigot and spun aluminum canopy fixed with opal polycarbonate, pipe

arrangement for vertical mounting driver and accessories wired upto

terminal block.IP 65 (i) 30W Cat-lll

Replacing old & U/s by new Providing and erecting Approved make

Four pole moulded case circuit breaker having breaking capacity ICU

of 25 KA. at 415 V,having normal current rating up to 25 A to 100A.

with Fixed thermal & magnetic release suitable to work on A.C. supply

19 50 c/s. with all internal connections, spreader tinned copper & 1.00 Ea 6173.12

complete erected in existing 16 G.M.S. housing. ICS=100% of ICU

Replacing old & U/s by new Providing and erecting Approved make

Four pole moulded case circuit breaker having breaking capacity ICU

of 35 KA. at 415 V. having Normal current rating 200A.with variable

20 Thermal & magnetic release suitable to work on A.C.supply 50 c/s. 1.00 Ea 16221.61

with all internal connections, spreader tinned copper & complete

erected in existing 16 G.M.S.housing ICS=100% of ICU only

Replacing old & U/s by new Supplying & erecting approved make

Four Pole 415V change over switch interior for panel mounting with

operating mechanism A.C.23 duty confirming to IS for (D)200A Cat-

Replacing old & U/s by new Supplying and erecting triple pole &

neutral 440V / 500V panel mounting Copper Busbars with four equal

Nos. of electrolyte bus having current density not more than 1.6 Amp. /

sq.mm (Rated current / cross section area) duly wrapped with colour

22 insulating tape for phase sequence of following current carrying 1.00 Rnmtr 1961.42

capacity, erected with necessary bus bar supports /insulators, main

cable socket to each bar, erected in existing cubical panel with

necessary connections. (A) Suitable for 100 Amp. Capacity

22b (B) Suitable for 200 Amp. capacity 1.00 Rnmtr 3202.71

Supplying Knife / Blade / DIN type HRC fuse link capable to

23 withstand 80 K.A. confirms to I.S. 13703 for following current 3.00 Ea 634.28

capacity (F) 250 Amp (Size I )

Replacing old & U/s by new providing and erecting Miniature circuit

breaker single pole 6A to 25A suitable to operate on 240 V A.C.

24 system and having breaking capacity 10 KA to be erected in existing 44.00 Ea 112.11

box. confirming to IS 8828/1996 with ISI Mark Cat.III

Replacing old & U/s by new Providing & erecting 240 V MCB double

pole switch for lighting Load (B Curve) having 10 KA breaking

capacity & confirms to IS : 8828 in existing box having following

capacity (A) 6 to 32 Amp. Cat III

Replacing old & U/s by new Providing & erecting 415 V MCB Four

Pole for Motor & Inductive Load (C Curve) having 10KA breaking

capacity & confirms to IS :8828 in existing box having following

capacity (c)63 Amp. Cat III

Providing and erecting Sheet Steel powder coated MCB distribution

board - flush / surface mounted fitted with busbar, neutral link, earth

bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 &

without MCB to house appropriate nos. of MCBs.(The DBs should be

27 used of same company of MCB to be used) suitable for (A) single 1.00 Ea 885.77

phase incoming and horizontal single phase outgoing (b) sheet steel

double door (IP-43) (ii)6 way

Replacing old & U/s by new providing and erecting Approved make

RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and

Short Circuit withstand capacity of 10 KA and suitable for operation on

28 single phase 240 V,50Hz. having characteristic of quick action & 8.00 Ea 1969.50

tripping with all advance feature & do not incorporate any electronic

component. for following Max. rating erected as directed (i)

Amps.DP Cat III

Providing and erecting HOT deep Galvanised iron strip wire 8 to

Supplying & erecting earth pit of minimum bore dia.150mm size

approved make Earthing Electrode consisting Pipe-in-Pipe Technology

as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes

having Outer pipe dia of 50mm having 80-200 Micron galvanising,

Inner pipe dia of 25 mm having 200-250 Micron galvanising,

connection terminal dia of 12mm with constant ohmic value

surrounded by highly conductive compound with high charge

dissipation suitable for following type of applications with chamber

and heavy duty cover. (A)(approved make OEM has to submit test

certificate including value of earth resistance of installation duly

stamped and signed by agency and officer Incharge has to ensure the

30 value of earthing resistane mentioned in test Certificate) & having back 1.00 Ea 4591.46

filling compound of (B) Inner chemical (CCM Compound)-

Resistivity:- 0.2 ohm / meter testing as per IEC 62561-2017, Voltage

drop:- < 1 volt at no load & dry form, Sulphar content:- <2%(C) Back

fill Compound :- Earthing compound should be capable to retain

moisture for long time Necessary test report must be submitted by

Agency. (a) For Electrical Installation up to 440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

Replacing old & U/s by new Providing & erecting weather proof, dust

& vermin proof, floor mounted front operated indoor type cubical

panel board necessary IP-42 and above protection as per approval from

engineer incharge made from 14 SWG thick CRC M.S. sheet for outer

body & doors, 16 SWG thick CRC M.S.sheet for internal partitions

31 with necessary accesories , supporting angles/ flats channel including

cutting, bending, drilling, welding, riveting with internal partitions &

cable alley as per requirements & instruction of engineer-in-charge

with erection of

supplied switch gears, BUSBARS, suitable size of inter connecting

PVC copper wire / copper-aluminium strips, rubber grommets, rib,

bakelite control fuses/MCB for measuring instruments, earth bus &

earth bolts, foundation flange - bolts-base Plates, sufficient nos. of

hinged doors, handles with locking arrangement and rubber

gasket,heavy duty end terminal connection,danger notice

board,necessary ventilation,earthing strip complete. The Panel shall be

painted with epoxy powder coating.

(The rates excludes the cost of switchgears, bus bars, inter connecting

mains & Copper Aluminium strips, meters, Fuses etc. The dimension

shall be measured excluding base beams) The panel shall be supplied

with following approved manufacturers with following size. (A) locally 3.00 Sq.Mtr 10468.65

fabricated panel board (i) with 350 mm depth

Replacing old & U/s by new Providing and erecting XLPE(IS:7098)(I)-

88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV.

32 to be laid on wall with necessary clamps or in existing trench / pipe of 9.00 Mtr 284.82

following size of cables (C) 3 1/2 core 50 Sq. mm ( 25 Sq.1/2 mm

32b (D) 3 1/2 core 70 Sq. mm ( 35 Sq. mm 1/2 core) 5.00 Mtr 378.75

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable

multistrand / Solid Aluminium conductor for 1.1 KV. to be laid on

wall with necessary clamps or in existing trench / pipe of following

size of cables (A) 4 core 4 Sq. mm

Providing and, fixing heavy duty flange type brass double compression

type cable gland with rubber ring for PVC insulated armoured cable

34 complete with out going tails, insulating tape etc for following size of 2.00 Ea 66.66

cables. (A) 3 core 35/50 Sq. mm

34b (B) 3 core 70 Sq. mm 2.00 Ea 89.89

Solder less crimping type Aluminium lugs conforming to IS suitable

for cable of following size evenly crimped with high pressure tool &

35 connected to switchgear terminals with brass/cadmium plated nut bolts 8.00 Ea 20.20

in an approved manner. (D) 35/50 Sq.mm.

Replacing old & U/s by new Providing and erecting Approved make

Ceiling fan with double ball bearing ISI mark with condenser A.C.

36 23OV.50 c/s.1200 mm. sweep complete, canopy erected on existing 26.00 Ea 1596.81

hook or clamp with earthing. [Make shall be approved by Engineer in

Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S.

37 Pipe down rod erected duly painted for fan complete with proper 10.00 Mtr 108.07

insulation without leakage and earthing.

Replacing old & U/s by new Supplying & erecting approved make low

noise decorative exhaust fan having square frame ABS body with

inbuilt lowers & square frame.250mm with 1350 RPM Cat.II

Supplying & erecting approved make SMC press moulded composite

FRP. loop-in, loop-out approx. 2mm thick box complete with Bakelite

connector strip 5way(3P+N+E),DIN rail for mounting mob & hinged

doors as per requirement having locking arrangements with mounting

39 clamp with nuts, bolts & washers suitable for erection on pole with 1.00 Ea 3420.87

cable clamps& earth bolt of following size of box. (I) 400mm x 300mm

39b (C)150mm x 125mm x 100mm [deep] 13.00 Ea 476.72

Supplying and erecting approved make single phase servo controlled

voltage stabilizer suitable for input voltage range 180/25OV. And

output voltage range 225/235V. A.C. complete erected. (B) 3.0 KVA

Replacing old & U/s by new Supplying and erecting Direct - On - Line

Starter with 18 A. rating contactor and with 3.5 Amp. 18A range

41 directly operated in totally insulated elegant enclosure for single phase 1.00 Ea 2100.80

operation up to 3 HP as per IS 13947 complete erected on P.W. Block

with necessary connection. Cat-lll

Replacing old & U/s by new S.I.T.C. of single phase submersible pump

set suitable for 100 mm size or more dia bore well having motor

capacity and discharge as under with necessary panel box. Lifting and

42 Lowering taken extra. (b) Motor rating 1.5 HP (16 stage) pump having 1.00 Ea 17607.33

capacity of 50 LPM at 60 mtr head suitable for 32 mm dia. delivery

Replacing old & U/s by new Supplying and erecting approved make

panel mounting type Digital Voltmeter having 3 digits LED display,

43 to 750 AC Volts range erected on existing panel board with all 1.00 Ea 1275.63

connection, wiring etc .with manufacturers calibration certificate.

Replacing old & U/s by new Supplying and erecting approved make

panel mounting type Digital Ammeter having 3 digits LED display,

external CT operated, calibrated for 0 to 1000 Amps suitable to operate

44 on 500 Volt AC , erected on existing panel board with all connection, 1.00 Ea 1558.43

wiring etc .with manufacturers calibration certificate.

Supplying and erecting Ammeter / Voltmeter selector switch for

45 phase AC Supply 500 V on existing panel board with necessary 2.00 Ea 317.14

Providing & erecting L.T. Current Transformer with bar primary 50/5

to 1000/5 ratio 15 VA burden erected in existing CRCA box duly

secured with insulating materials connected to the meter

Supplying and erecting approved make suitable panel indicator LED

47 type lamp, lens cover, complete erected with necessary connections. 6.00 Ea 43.43

AMOUNT PUT TO TENDER FOR RS.

Rupees Five Lakh(s) Three Thousand Six Hundred Fifty Three and paise Sixty Seven

(A) Total Tendered Amount Rs..…..……………….…………...…………….

(B) Rebate on above tendered amount (if any)………………..…..%(in Figure) Rs….………………….………………………...

(C) Net tendered amount (A-B) Rs……………………………………………….

All work shall be carried out as per Public Works Department Handbook and other specification of Division or as

Rates quoted include clearance of site (prior commencement of work and at its close) in all respects and hold good for

Deputy Executive Engineer Executive Engineer

R&B Electrical Sub Division R&B Electrical Division

Porbandar Junagadh