Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.1 LAccepted-AOC 0 GRAMTHANG MINJEE KARGIL KARGIL LADAKH 194105 | KARGIL | LADAKH | 194105 | L1 | Accepted-AOC LOWEST BIDDER AND QUOTED REASONABLE RATE | |
| 2 | L2₹12.8 L+₹1.4 L (12.6%)Rejected-Finance 6 GURU GOBIND SINGH NAGAR DHAKOLI DHAKOLI PATIALA PUNJAB 140602 | PATIALA | PUNJAB | 140602 | L2 | Rejected-Finance Other than lowest bidder | |
| 3 | L3₹13.5 L+₹2.1 L (18.9%)Rejected-Finance | L3 | Rejected-Finance Other than lowest bidder | |
| 4 | L4₹13.9 L+₹2.5 L (22.3%)Rejected-Finance 361 BEHIND DAV SCHOOL JAWAHAR NAGAR SRINAGAR 190008 | SRINAGAR | JAMMU AND KASHMIR | 190008 | L4 | Rejected-Finance Other than lowest bidder | |
| 5 | L5₹14.3 L+₹2.9 L (25.8%)Rejected-Finance R O Y K PURA QAZIGUND ANANTNAG 192221 J K | ANANTNAG | JAMMU AND KASHMIR | 192221 | L5 | Rejected-Finance Other than lowest bidder |
Tender Value
₹15 L
EMD Value
₹30,000
Closing Date
29 Feb 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer Kargil
Office of GE Kargil, PIN - 908121, C/o 56 APO
GE-K-88-2023-24 - REPAIR TO INTERLOCKING TILES, CHEQUERED TILES, PCC PLATFORMS AND MISC BR WORKS IN VARIOUS UNITS AT KARGIL UNDER GE KARGIL ZONE B
2024_MES_639985_1
GE/K-88/2023-24
Open Tender
Civil Works
Item Rate
180 days
Kargil
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE Kargil
₹30,000
Office of GE Kargil
8 Jul 2024
31 Jan 2024
2 Mar 2024
31 Jan 2024
29 Feb 2024
15 Feb 2024
7 Feb 2024
Amount
Dismantling of floor hearth and wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises, complete all as specified and directed by Engr-in-Charge.
Demolition of PCC (un-reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level).
M&L for 75mm thick cement concrete 1:4:8 type D-2 (using 40mm graded aggregate) on floor sub base, complete all as specified and directed by Engr-in-Charge.
M & L for 100mm thick, plain cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in sub base flooring, surface finished even and rough to receive floor topping, complete all as specified and directed by Engr-in-Charge.
M & L for 25 mm thick plain cement concrete 1:2:4 type B-0 using WPC (WPC to be paid measured and seperately) (12.5mm graded stone aggregate) as in floor, complete all as specified and directed.
M&L for chequered cement concrete coloured tiles 30cm x 30cm x 25mm thick set, jointed and pointed in neat cement slurry and pointed with grey cement and pigment in floors over 15mm thick screed bed or bedding layer in cement mortar 1:6, complete all as specified and directed by Engr-in-Charge.
Dismantling of Stone sett paving of any description or thickness in floors, aprons etc. laid dry or laid dry and pointed, complete all as specified and directed.
M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade set jointed and pointed with grey cement and pigment, complete all as specified and directed by Engr-in-Charge.
M&L sand filling under floors or in foundations including watering and consolidation, complete all as specified and directed by Engr-in-Charge.
M&L for providing, cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in roof kerbs or mud stops, rounded or chamfered on edges, complete all as specified and directed by Engr-in-Charge.
M & L for endura tiles, heavy duty type of size 300mmx300mm, 10mm thick, non skid, acid and scratch resistance laid over 15mm thick screed bed in CM 1:4 as in floor, jointed in neat cement slurry and pointed with white cement and pigment to match the shade, complete all as specified and as per direction of manufacturer / Engr-in-Charge.
Demolition of cement concrete (reinforced) of any description and in any position, complete all as specified and directed
Dismantling structural steel work including doors, gates but excluding framed truss etc.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out, complete all as specified and directed.
M&L PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in foundations, mass filling, sub base and the like, complete all as specified & directed.
M&L for RCC (1:2:4) type B1 using 20mm graded stone aggregate as in foundations, including rafts, footings, foundation beams, plinth beams;bases for columns, etc., basement slabs, under-reamed piles and mass concrete.
M&L for pre-cast cement concrete 1:2:4 block masonry with solid blocks type B1 (using 20mm stone aggregate) using wpc (WPC to be paid measured and separately), exc. 10 cm in width and setting in cement mortar 1:4, complete all as specified and directed by Engr-in-Charge.
M&L for RCC (1:2:4) type B1 using 20mm graded stone aggregate as in slabs, beams and columns in floors, roofs, landings, canopies, shelves and the like, complete all as specified & directed.
Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for flat rough finished surface of concrete.
M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 dia or secuiring with clips.
M&L for TMT bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 dia or secuiring with clips.
M&L rendering 15mm thick cement plaster in cement mortar (1:4) using wpc ( WPC to be paid measured and seperately) finished even & fair without using extra cement on brick/concrete surfaces.
Supply only integral water proofing compound.
M&L for two coats of cement based paint on newly plastered surfaces of walls including preparation of surfaces, complete all as specified & directed.
S&F Framed work as in doors or gates of angle or other section (for ornamental and intricate design) with gusset plates, rails, braces, etc., complete drilled for fixing of steel sheeting or other covering, doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing complete conforming to Fe.290.Gde-E-165, complete all as specified and directed.
M&L for preparing surface of steel & iron work of any description exc 10 cm width or girth & applying two coats of synthetic enamel paint over one coat of red oxide primer, complete all as specified and directed.
Removing excavated material exc. 50m but n exc. 250m and depositing where directed, complete all as specified and directed by Engr-in-Charge
M&L for providing cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregates) as in coping, complete all as specfied and directed.
Dismantling fencing wire mesh, any type, complete all as specified and directed by Engr-in-Charge
Dismantling posts or struts embedded in concrete, brickwork, masonary etc (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground, complete all as specified and directed by Engr-in-Charge
Excavating in post holes in hard dense soil (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n exc 50m and making good surface, complete all as specified & directed.
Supply only chain link MS galvanised fencing, any size or type, complete all as specified and directed by Engr-in-Charge.
M&L for round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for chain link fencing, hooking ends complete all as specified and directed by Engr-in-Charge (Fe-410W, Gde.E-250(Qlty 'A') or Fe-290, Gde.E-165).
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, staining bolts, etc. inluding provision of binding wire, complete all as specified and directed by Engr-in-Charge.
Supply & fixing mild steel work in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc., flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe- 290 Gde E-165, complete all as specified and directed by Engr-in-Charge.
M&L for Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n exc 10cm long, complete all as specified & directed by Engr-in-Charge
Supply & fixing galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured).
Note : Deduction for amount of Rs 24880.00 as listed in Schedule A Part - II (Schedule of Credit) shall be made while awarding of contract.
JP AND CO.
M/S MOHD HUSSAIN
M/S TRADE LINK
M/S BHAT ENGINEERS
KASHMIR FAIR DEAL SERVICES
M/S Ghulam Mustafa
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .