GENERAL-Excise Range Office KasaragodAddition of Ladies Rest room and Thondi room-General Electrical Work

Electrification

1.10.3:Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group C

1.33:Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.

90.3.21.3:Supply & installation of light fittings on 'C/U' shaped flat iron bracket Supply, conveyance, installation, testing and commissioning the light fittings of following types made from 0.5mm CRCA sheet complete with all accessories and lamps etc. directly on wall using 2 nos. 'C/U' brackets made from 20 x 3 mm MS flat, painting the flat iron bracket and giving connections with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS or extending the original wiring and giving connection etc. as required.1200 mm 1X20W LED Lamp with box type fixture

90.3.20.3:Supply & installation of light fittings on TW round block Supply, conveyance installation testing and commissioning the light fittings of following types made of CRCA with 0.5mm thickness complete with all accessories and lamps etc. directly on wall or ceiling with PVC round block neatly painted to suit the fitting and giving connection with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS and giving connections as required.1200 mm 1X20W LED Lamp with box type fixture

1.58:Supplying and fixing PVC batten/ angle holder including connection etc. as required.

OD248930/2025-2026:Supply and providing the 9W LED lamp in the existing fittings as required

90.15.4.2:Supply Conveyance, installation, testing and commissioning of 36/40W LED street light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing,acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)

90.3.18.2:Supply, fabrication, conveyance and fixing the following sizes of B class GI pipe bent to shape / cut and welded to shape and fixing the same to wall / parapet using clamps as noted along with each size, painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer, making good the damages, colour washing etc as required.32 mm dia with HG company fabricated clamps

OD248963/2025-2026:Supply, and fixing of cast aluminum bulk head fitting with mesh guard giving connections with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS or extending the original wiring and giving connection etc. as required.

1.25:Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

90.4.5.4:Supply, Installation, testing and commissioning of ceiling fan of following sizes including wiring the down rods of standard length (up to 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required. 1200mm sweep - ceiling fan complete with service value minimum 4.0(cub meter/minute/Watt), Air delivery minimum 210(cubic meter/minute), Copper winding suitable for 230V/240V single phase AC supply

90.4.8:Charges for cutting holes suitable for accommodating exhaust fans up to 305mm sweep including plastering colour washing etc. as required.

OD248927/2025-2026:Supply,conveyance,installation,testing and commissioning of 300/305mm sweep light duty exhaust fans in metal frame in the existing opening,fixing necessary Anchor bolts/bolts and nuts etc.,are required including giving connections with the supplied wire along with the exhaust fan

OD248962/2025-2026:supply conveyance installation,testing, commisioning of 450 sweep metal wall fan, fixing necessary clamps ,anchor bolts/bolt and nuts etc, as required including giving connections with the supplied wire along with the fan

1.27.1:Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.1 or 2 Module (75mmX75mm)

1.27.4:Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.6 Module (200mmX75mm)

1.24.1:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch

1.24.4:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5/6 amp socket outlet

90.6.10.1:Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required20 mm

90.6.10.2:Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required25 mm

1.17.3:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 X 1.5 sq.mm

1.17.5:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.5 X 1.5 Sq. mm

1.17.21:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 4 sq. mm

2.3.2:Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 8 way, Double door

2.3.3:Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 12 way, Double door

2.12.1:Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

2.10.2:Supplying and fixing 5A to 32 A rating, 240/415 volts, 10 kA, ""C"" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole and netural

2.14.1:Supplying and fixing following rating, double pole, (single phase and neutral),240 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 milli amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 25 amps

2.10.1:Supplying and fixing 5A to 32 A rating, 240/415 volts, 10 kA, ""C"" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole

90.16.5.1:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.2.00 mm (14 SWG)

OD248929/2025-2026:Supply and providing 25x3mm brass nut and bolt etc are required

OD248926/2025-2026:Supply and providing 12x3mm brass nut and bolt etc are required

Please Enable Macros to View BoQ information

KERALA PUBLIC WORKS DEPARTMENT

Electrical Division

Electrical Sub Division

Amount of Estimate

Original Sanction, if any

Register No.

Reference No.

Returned to

Sanctioned as Divisional Register No.

Technically sanctioned for

Funds for the work to extend of

May be met from the detailed Head of Account

Executive Engineer

PWD Electrical Division

Kozhikode

Copy forwarded to

KERALA PUBLIC WORKS DEPARTMENT

Electrical Division

Electrical Sub Division

Amount of Estimate

Original Sanction, if any

Register No.

Reference No.

Returned to

Sanctioned as Divisional Register No.

Technically sanctioned for

Funds for the work to extend of

May be met from the detailed Head of Account

Executive Engineer

PWD Electrical Division

Kozhikode

Copy forwarded to: The Asst. Executive Engineer,PWD Ele Subdivision,Malappuram

KERALA PUBLIC WORKS DEPARTMENT

Electrical Division

Electrical Sub Division

Amount of Estimate

Original Sanction, if any

Register No.

Reference No.

Returned to

Sanctioned as Divisional Register No.

Technically sanctioned for

Funds for the work to extend of

May be met from the detailed Head of Account

Executive Engineer

PWD Electrical Division

Kozhikode

Copy forwarded to: The Asst. Executive Engineer,PWD Ele Subdivision,Mananthavady

KERALA PUBLIC WORKS DEPARTMENT

Electrical Division

Electrical Sub Division

Amount of Estimate

Original Sanction, if any

Register No.

Reference No.

Returned to

Sanctioned as Divisional Register No.

Technically sanctioned for

Funds for the work to extend of

May be met from the detailed Head of Account

Asst.Executive Engineer

PWD Electrical Division

Kozhikode

KERALA PUBLIC WORKS DEPARTMENT

Electrical Division

Electrical Sub Division

Amount of Estimate

Original Sanction, if any

Register No.

Reference No.

Returned to

Sanctioned as Divisional Register No.

Technically sanctioned for

Funds for the work to extend of

May be met from the detailed Head of Account

Executive Engineer

PWD Electrical Division

Kozhikode

Copy forwarded to: The Asst. Executive Engineer,PWD Ele Subdivision, Kasaragod

Electrical Division

Electrical Sub Division

Amount of Estimate

Original Sanction, if any

Register No.

Reference No.

Returned to

Sanctioned as Divisional Register No.

Technically sanctioned for

Funds for the work to extend of

May be met from the detailed Head of Account

Executive Engineer

PWD Electrical Division

Kozhikode

KERALA PUBLIC WORKS DEPARTMENT

Electrical Division

Electrical Sub Division

Amount of Estimate

Original Sanction, if any

Register No.

Reference No.

Returned to

Sanctioned as Divisional Register No.

Technically sanctioned for

Funds for the work to extend of

May be met from the detailed Head of Account

Asst.Executive Engineer

PWD Electrical Division

Kozhikode

KERALA PUBLIC WORKS DEPARTMENT

Technical sanction

Electrical Division

Electrical Sub Division

Amount of Estimate

Original Sanction, if any

Register No.

Reference No.

Returned to

Sanctioned as Divisional Register No.

Technically sanctioned for

Funds for the work to extend of

May be met from the detailed Head of Account

Executive Engineer

PWD Electrical Division

Kozhikode

Copy forwarded to: The Asst. Executive Engineer,PWD Ele Subdivision,Mananthavady

KERALA PUBLIC WORKS DEPARTMENT

Technical Saction

Electrical Division

Electrical Sub Division

Amount of Estimate

Original Sanction, if any

Register No.

Reference No.

Returned to

Sanctioned as Divisional Register No.

Technically sanctioned for

Funds for the work to extend of

May be met from the detailed Head of Account

Executive Engineer

PWD Electrical Division

Kozhikode

Copy forwarded to: The Asst. Executive Engineer,PWD Ele Subdivision,Malappuram

KERALA PUBLIC WORKS DEPARTMENT

Electrical Division

Electrical Sub Division

Amount of Estimate

Original Sanction, if any

Register No.

Reference No.

Returned to

Sanctioned as Divisional Register No.

Technically sanctioned for

Funds for the work to extend of

May be met from the detailed Head of Account

Executive Engineer

PWD Electrical Division

Kozhikode

Copy forwarded to: The Asst. Executive Engineer,PWD Ele Subdivision,Malappuram

KERALA PUBLIC WORKS DEPARTMENT

Electrical Division

Electrical Sub Division

Amount of Estimate

Original Sanction, if any

Register No.

Reference No.

Returned to

Sanctioned as Divisional Register No.

Technically sanctioned for

Funds for the work to extend of

May be met from the detailed Head of Account

Asst.Executive Engineer

PWD Electrical Division

Kozhikode

KERALA PUBLIC WORKS DEPARTMENT

Electrical Division

Electrical Sub Division

Amount of Estimate

Original Sanction, if any

Register No.

Reference No.

Returned to

Sanctioned as Divisional Register No.

Technically sanctioned for

Funds for the work to extend of

May be met from the detailed Head of Account

Asst.Executive Engineer

PWD Electrical Division

Kozhikode

KERALA PUBLIC WORKS DEPARTMENT

Electrical Division

Electrical Sub Division

Amount of Estimate

Original Sanction, if any

Register No.

Reference No.

Returned to

Sanctioned as Divisional Register No.

Technically sanctioned for

Funds for the work to extend of

May be met from the detailed Head of Account

Executive Engineer

PWD Electrical Division

Kozhikode

Copy forwarded to: The Asst. Executive Engineer,PWD Ele Subdivision,Malappuram

KERALA PUBLIC WORKS DEPARTMENT

Electrical Division

Electrical Sub Division

Amount of Estimate

Original Sanction, if any

Register No.

Reference No.

Returned to

Sanctioned as Divisional Register No.

Technically sanctioned for

Funds for the work to extend of

May be met from the detailed Head of Account

Asst. Executive Engineer

PWD Electrical Division

Kozhikode

KERALA PUBLIC WORKS DEPARTMENT

Electrical Division

Electrical Sub Division

Amount of Estimate

Original Sanction, if any

Register No.

Reference No.

Returned to

Sanctioned as Divisional Register No.

Technically sanctioned for

Funds for the work to extend of

May be met from the detailed Head of Account

Executive Engineer

PWD Electrical Division

Kozhikode

Electrical Division

Electrical Sub Division

Amount of Estimate

Original Sanction, if any

Register No.

Reference No.

Returned to

Sanctioned as Divisional Register No.

Technically sanctioned for

Funds for the work to extend of

May be met from the detailed Head of Account

Executive Engineer

PWD Electrical Division

Kozhikode

KERALA PUBLIC WORKS DEPARTMENT

Electrical Division

Electrical Sub Division

Amount of Estimate

Original Sanction, if any

Register No.

Reference No.

Returned to

Sanctioned as Divisional Register No.

Technically sanctioned for

Funds for the work to extend of

May be met from the detailed Head of Account

Executive Engineer

PWD Electrical Division

Kozhikode

Copy forwarded to Asst.Enginner,PWD Electrical Section No.I, Kozhikode

KERALA PUBLIC WORKS DEPARTMENT

Electrical Division

Electrical Sub Division

Amount of Estimate

Original Sanction, if any

Register No.

Reference No.

Returned to

Sanctioned as Divisional Register No.

Technically sanctioned for

Funds for the work to extend of

May be met from the detailed Head of Account

Asst Executive Engineer

PWD Electrical Division

Kozhikode

KERALA PUBLIC WORKS DEPARTMENT

Electrical Division

Electrical Sub Division

Amount of Estimate

Original Sanction, if any

Register No.

Reference No.

Returned to

Sanctioned as Divisional Register No.

Technically sanctioned for

Funds for the work to extend of

May be met from the detailed Head of Account

Executive Engineer

PWD Electrical Division

Kozhikode

KERALA PUBLIC WORKS DEPARTMENT

Electrical Division

Electrical Sub Division

Amount of Estimate

Original Sanction, if any

Register No.

Reference No.

Returned to

Sanctioned as Divisional Register No.

Technically sanctioned for

Funds for the work to extend of

May be met from the detailed Head of Account

Asst.Executive Engineer

PWD Electrical Division

Kozhikode

Electrical Division

Electrical Sub Division

Amount of Estimate

Original Sanction, if any

Register No.

Reference No.

Returned to

Sanctioned as Divisional Register No.

Technically sanctioned for

Funds for the work to extend of

May be met from the detailed Head of Account

Executive Engineer

PWD Electrical Division

Kozhikode

KERALA PUBLIC WORKS DEPARTMENT

Electrical Division

Electrical Sub Division

Amount of Estimate

Original Sanction, if any

Register No.

Reference No.

Returned to

Sanctioned as Divisional Register No.

Technically sanctioned for

Funds for the work to extend of

May be met from the detailed Head of Account

Executive Engineer

PWD Electrical Division

Kozhikode

Copy forwarded to: The Asst. Executive Engineer,PWD Ele Subdivision,Malappuram

Approved List of Materials

FRLS PVC insulated Copper Wire/Flex Wire /Flat cable

PVC Conduit (ISI Marked) Ivory only

PVC Accessories (ISI marked)

U G Cables (ISI marked)

Cable Glands/Socket

Boxes for Modular Accessories/Front Plates/ Modular type switches, Bell push, Plug Sockets,/ Stepped Electronic fan regulators, and other modular accessories [Group B Rohs]

Bracket, batten pendant holders (ISI marked)

Ceiling rose (ISI marked with Polycarbonate body)

RCCB/RCBO/Miniature isolator/MCB (10kA)

Enclosure for MCB DB

SDFU, SDU, COS [AC 23A duty]

Fuse base, fuse links

Enclosure for MCCB

LED tube Fitting

LED Bulb

Ceiling fan

Exhaust fan

Meters

Other Items

Declaration I/we……………………………………………………………………………………………………… …………………………………………………… (HE the name & address of the contractor), has personally verified the availability of the make of materials mentioned above with the local market and is convinced that they are available in the market. I agree to execute the work using the above mentioned makes only. I also assure that, I will not request for any change in materials at a later date.

Contractor