ADDITION ALTERATION TO GROUND FLOOR (RIGHT WING) OF BUILDING NO P-13 AT INS CIRCARS, VISAKHAPATNAM

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness, (Below or above ground level) complete all as specified.

M & L for glazed, coloured, ceramic, tiles of size (350mm x 250 mm/450mm x 350mm/300mmx450mm) x 6 to 7 mm thick, on vertical surfaces such as skirting, dados etc, including 10 mm thick backing coat in cement mortor 1:4 and set & jointed in neat cement slurry & pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.

M & L for non-skid, ceramic, coloured tiles 7 to 8 mm thick (square/ rectangular) area of Each tile exc 0.11 Sqm but n.exc 0.18 Sqm, in floors etc, including 15 mm thick screed bed in cement mortor 1:6 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.

M&L for Non-Skid ceramic coloured tiles 7 to 8 mm thick (Square/ Rectangular) polished, light shade, area of Each tile exc 0.11 Sqm but not exceeding 0.18 Sqm, in skirting/dado etc.,including 10mm thick backing coat in CM 1:4 set and jointed in neat cement slurry and pointed in white or Coloured cement to match. complete all as specified and directed.

M & L for non skid ceramic colour tiles 7 to 8 mm thick area of Each ile exc. 0.11 Sqm but n.exc. 0.18 Sqm in floors, etc including 15 mm thick screed bed in cement mortor 1:6 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.

M & L for non-skid, ceramic, coloured tiles 7 to 8 mm thick (square/rectangular) area of Each tile exc 0.11 Sqm but n.exc 0.18 Sqm, as in vertical surfaces such as skirting etc, including 10 mm thick screed bed in cement mortor 1:4 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.

M&L for Vitrified ceramic coloured tiles 10 mm thick (Square/ Rectangular) polished, light shade, area of Each tile exc 0.18 Sqm but not exceeding 0.36 Sqm, in floors,set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for Vitrified ceramic coloured tiles 10 mm thick (Square/ Rectangular) polished, light shade, area of Each tile exc 0.18 Sqm but not exceeding 0.38 Sqm, in Skirting/Dado etc., including 10mm thick backing coat in CM 1:4 set and jointed in neat cement slurry and pointed in white or Coloured cement to match. complete all as specified and directed.

M & L for machine cut kota stone slab flooring 20 to 25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing over and including 15 mm thick, screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for 25 mm thick PCC 1:2:4 type B0 (Using 12.5 mm graded stone aggregate) in sub base of floorings complete all as specified and directed.

M&L for 75 mm thick cement concrete 1:3:6 type C2 (using 40 mm graded stone aggregate) as in sub base floors, and finishing the concrete surface even and fair complete all as specified and directed.

Dismantling of stone slabs & tiles of any description or thickness laid in CM and pointed in any mortar, in floors, aprons etc., complete all as specified and directed.

Taking down Chowkats or frames with shutters exceeding 1.5 Sq. M Each n exc 4 Sqm (Without taking off shutters from the frames) complete all as specified and directed.

Taking down Chowkats or frames with shutters not exceeding 1.5 Sq. M Each (Without taking off shutters from the frames) complete all as specified and directed.

Taking down shutters exc 1 Sqm and n exc 2 Sqm Each complete all as specified and directed.

S & F Powder coated (minimum 50 micron) Anodised aluminium frame for doors, windows, ventilators with one oRmore rebates including joining cleat for fixing etc. complete all as specified and directed. (Note : (i) Thickness of aluminium section shall not be less than 1.5 mm).

S & F Powder coated Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, EPDM rubber packing, anodised aluminium snap beading, screws etc. and anodised aluminium fittings such as peg stay 150mm long (01 No), hinge type B-21, 100mm long (02 Nos) and suitable size of handle complete all as specified and directed.

S & F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge.

S & F 4.0 mm thick sheet glass, ordinary quality and glazing with rubber beading in square exc 0.5 sq. m in Each pane complete all as specified and directed.

S & F 4.0 mm thick sheet glass, ordinary quality and glazing with rubber beading in square not exc 0.5 sq. m in Each pane complete all as specified and directed..

S&F 5.5 mm thick tinted/figured sheet glass,glazing with oil putty and glazing clips in metal/ wooden frame with second class hard wood beading/ aluminum beading in frames in squares exceeding 0.5 Sqm in Each pane fixed glass complete all as specified and directed.

M & L for 12 mm thick, Prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination fixed with screws to timber/metal frame work complete all as specified and directed.

S&F first class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints.

M&L for Preparing surfaces of wood and wood based materials, steel and iron work, new or old, of any description and girth, not otherwise described, and treated with tar or coal tar black paint complete all as specified and directed.

S & F mild steel bands, straps, supports or stays of rain water, ventilating pipes including bolts, hooks (stay) for large gates, hook and pintel hinges, clamps, hold fasts, wall ties, flat iron fillets for securing wire mesh, wind tie, fan hook and similar work including necessary drilling bolting or riveting etc confoRming to Fe – 290 Gde E – 165 complete all as specified and as directed.

S & F 35 mm thick, factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

M & L for 4mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to timber complete all as specified and directed.

S & F 35 mm thick, factory made, glazed/skeleton shutters with second class hard wood,open rebated and prepared to receive glass, gauze, etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass, etc complete as specified and directed . Sizes of members of shutters as specified in SSR Part I, clause 8.24 (a) complete all as specified and directed

S&F 40 mm thick, factory made, glazed/skeleton shutters with first class hard wood,open rebated and prepared to receive glass, gauze, etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass, etc complete as specified and directed . Sizes of members of shutters as specified in SSR Part I, clause 8.24 (a) complete all as specified and directed

M&L for preparation of of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic varnish liquid transperant over a coat of wood filler complete all as specified and directed.

M&L for preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of pink primer complete all as specified and directed.

S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F in repair Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S&F 125 mm long Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type B-11 complete all as specified and directed

S&F 300 mm long extruded brass handles, fabricated type polished complete all as specified and directed

S&F 300 mm long brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts complete all as specified and directed

S&F 300 mm long brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed Complete all as specified and directed.

S & F Floor door stopper, 140 mm overall length of cover plate, brass body and tongue with hard drawn steel spring, fixed in floor complete all as specified and directed.

S & F 6 Levers,16.3 x 5.3x 3.2 cm floor lock with floor latch lock bolt ground lock, heavy body, Complete all as specified and directed.

S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, taple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed

S&F 200 mm long aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed

S&F 200 mm long extruded aluminium alloy handles, fabricated type, anodised [ ISI marked ] complete all as specified and as directed.

S&F 125mm Butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

S&F floor door stopper ,140 mm overall length aluminium alloy body including rubber tip , nickle plated to give a stainless steel finish , fixed with door to do up and down action to giving the rubber tip a good grip on the floor complete all as specified and directed.

S & F, Aluminium (Die cast) body door Closer hydraulically regulated, designation No 3, universal type, suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 Kg complete all as specified and directed.

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete as per specification and drawing and as directed.

S & F solid PVC door frames of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S&F 125 mm long extruded Aluminium alloy anodised Butt hinges with galvanized mild steel hinge pin type B 22 complete all as specified and directed by Engr-in-Charge.

S&F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed

S&F 150 mm long extruded aluminium alloy handles, fabricated type, anodised [ ISI marked ] complete all as specified and as directed.

Supply, materials and application of two component structural grade polymeRmodified reinstatement mortar of minimium compressive strength 12N/mm2 in 1 day and 45N/mm2 in 28 days. Minimum flexural strength should be 8 N/mm2 in 28 days. Single component acrylic polymer emulsion to be applied @ 6-8 Sqm/lit before the application of modified polymeRmortar .The morter shall be applied in layers exc 5 mm thick in layers and including surface preparation . ( maximum coverage area 1.3 Sqm at 10 mm thikness per 25.25 Kg bag ) Note:- This item shall be execution where shuttering is not possible or small patch repairs of structural elements . Make: (a) Acrylic polymer emulsion primer : Nitobond AR of FOSROC or equivalents solutions SIKA/STP/HINDCON as approved by GE. (b) PolymeRmodified reinstatement mortar:- Renderoc S2 of FOSROC or equivalents solutions SIKA/STP/HINDCON as approved by GE.

Material & labour for providing and placing in position free flow non shrink cementious microconcrete of Grade of M-50 to the effected beam, column etc. The micro concrete shall have a minimum 1 day compressive strength of 10 Mpa and 28 days strength of 50 Mpa, minimum tensile strength 5N/mm2 @ 28 days, minimum flextural strength 5N/mm2 @ 28 days and complete all as specified and directed by Engineer-in-Charge. 80 to 100 mm average thickness of column,beam and similar structural members including use and waste of water tight foRmwork to facillitate pouring of micro concrete including surface preparation etc. as peRmanufacturers instruction. Make(micro concrete):-Renderoc RG of FOSROC or equivalents solutions SIKA/STP as approved by GE.

Removing of concrete all around reinforcement bar upto 12 mm dia from behind the reinforcing bars average 25mm (but not less than 15mm air gap)by manual methods (using wire brushing ,chiselling etc) removing all rust from steel reinforcement bar by emery paper and cleaning the area throughly by water and allow it to dry and totally rust free and applying two component epoxy zinc rich primer on existing reinforcement surface of minimum specific gravity 1.75, adhesive bond strength with steel is 1.50N/mm2 and maximum coverage area 5.00 Sqm per litre including all necessary scaffolding complete all as specified and directed. Make- Nitozinc primer of FOSROC or equivalents chemical of SIKA/ STP/ HINDCON as approved by GE.

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc., including removal of rubbish off the premises, where directed and leaving the work clear of any plastering.

M & L for rendering 15 mm thick in two coats (10mm+5mm Each) on other than fair faces of brick work or concrete surfaces in cement mortar 1:4, mixed with integral water proofing compound with weight of cement in top layer as peRmanufacturer's instructions and finished the surface even and fair without using extra cement complete all as specified and directed. (Note : WPC shall be measured and paid separately against respective item).

Supply only integral water proofing compound (ISI marked) complete all as specified and directed.

M & L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished the surfaces even and fair without using extra cement complete all as specified and directed.

M & L for rendering 5 mm thick in cement mortor 1:3 on concrete surfaces as in chajja/ceilings and finishing surfaces even and fair without using extra cement complete all as specified and directed.

M&L for preparation of new platered surface of wall and applying two coats of weather proof 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre, having dart pick up resistant, silicon enhanced, UV resistant and PU enhanced property over a coat of alkali resistant primer including applying one oRmore coat of wall care putty to a smooth surface including making good any undulations on the surfaces including all necessary scaffolding,complete all as specified and directed. Note :- Painting work shall be carried out acoording to Smart Painting procedure mentioned in PS

M & L for preparing newly plastered surfaces of wall and applying two coats of oil bound washable distemper over a coat of primer including applying one oRmore coat of wall care putty to get a smooth surface including making good any undulations on the surfaces complete all as specified and as directed. Note :- (i) Painting work shall be carried out acoording to Smart Painting procedure mentioned in PS (ii) Sanding of surfaces shall be done by mechanical sander with 1500-2700 rpm with internal dust extraction system for clean environment certified by the Paint manufacturer)

All as per item no 62 here-in-before but in newly plastered surfaces of ceiling

Demolition of reinforced cement concrete in any position not otherwise specifically provided for and removing rubbish to a distance not exceeding 100 M complete all as specified and directed.

M & L for reinforced cement concrete (1:2:4), type B1 (using 20mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including necessary foRmwork complete all as specified and as directed.

M&L foRmild steel TMT bars 6 mm to 8 mm dia., cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and directed.

S & F in repair towel ring square with round flange including chromium plated brass screws and wooden/plastic cleats etc complete all as specified and directed. Make: Jaquar Cat No. ACN-1121N or equivelant of make as per list of manufactureRmentioned in PS.

S&F in repair CP health faucet with 8mm Dia, 1.2 Meter Long Flexible Tube & Wall Hooks complete all as specified and directed. Make: Jaquar Cat No. ALD-573 or equivelant of make as per List of manufacturer's

S&F in repair 15 mm bore 2 in 1 bib cock, chromium plated with wall flanges complete all as specified and directed. Make: Jaquar Cat No. FLR-5041N or equivelant of make as per List of manufacturer's

S&F in repair Toilet paper holder with with flap recessed type, , chromium plated fixed to wall with brass screw complete all as specified and directed Make: Jaquar Cat No. AHS-1553 or equivelant of make as per List of manufacturer's

S & F in repair 15 mm bore, pillar taps, single lever tall Boy with 150mm extension body fixed spout without popup waste system with 600mm long braided hoses complete all as specified and directed. Make : Jaquar Cat No.FLR-5005NB or equivelant of make as per list of manufacturer's

S&F in repair 15 mm bore, angular stop cock with wall flange, cast copper alloy, chromium plated, fancy type, screwed for iron pipe or for brass ferrule complete all as specified and directed. Make: Jaquar Cat No. KUP-35053PM or equivelant of make as per List of manufacturer's

S&F in repair single towel rail 600mm long,stainless steel complete all as specified and directed. Make: Jaquar Cat No. ACN-1111SM or equivelant of make as per List of manufacturer's

S&F in repairs, 15mm bore, chromium plated bib cock with wall flange, screwed for iron pipe or for brass ferrule complete all as specified and directed. Make: Jaquar Cat No. FLR-5047N or equivelant of make as per List of manufacturer's

S & F in repairs Vitreous China Rimless Single Piece WC with UF soft close slim seat cover, Hinges, Fixing Accessories, Accessories Set and Cistern Fittings, Size: 380x725x690 mm, S Trap - 300 mm and all fittings and fixtures including connection to outgoing drain including making good damaged/disturbed surfaces complete all as specified and directed. Make: Jaquar Cat No. ONS-WHT-10853S300UFSM or equivelant model of make as per list of manufactureRmentioned in PS.

S & F in repair Vitreous China Table Top Basin, Oval Shape of Size: 640x425x155 mm excluding taps fixed on granite slab complete all as specified and directed. Make : Jaquar Cat No. JDS-WHT-25901 or equivelant model of make as per list of manufactureRmentioned in PS.

S & F Vitreous China urinal, with all Fixing Accessories Set without sensor, of Size 480x300x740mm, Starwhite with grating and union for discharge pipe (excluding flushing cistern, flush pipe & waste pipe) including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement complete complete as specified and directed. (Make: Jaquar Cat No. URS-WHT-13255 or equivelant of make as per list of manufacturer's)

S&F in repairs full height urinal partition with 8 mm thick frosted glass ,chrome finish ,size - 1950mm(H)x 600 mm(W) complete all as specified and directed. (Make: Jaquar Cat No. JSE-CHR-810UF60H19X or equivelant of make as per list of manufacturer's)

S&F in repair PVC waste pipe of bore 32 mm and 800mm long complete all as specified and directed.

S & F in repair PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

S&F in reapir PVC (SWR) Floor trap of 75 mm dia., outlet with grating including jointing with solvent cement complete all as specified and directed.

S & F in repairs, CP, wall mixer 3-in-1 system with provision for both CP, hand shower ø140mm round shape single flow with air Effect (ABS Body & face plate chrome plated) with rubit cleaning system and Overhead shower 120X120mm square shape single flow (face plate stainless steel & ABS body in chrome finish) with rubit cleaning system complete with 190 mm long bend pipe, connecting legs and wall flange complete all as specified and directed. Make : JAQUAR, Cat No .CQT-23281UPR (wall mixer), Cat no-HSH-1727 (Hand shower) ,cat no OHS-1667 (over head shower), Cat no-SHA-483(Bend Pipe) or equivelant of make as per list of manufacturer's

S&F 20 mm dia ,3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having theRmal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc including taking down old GI tube complete all as specified and directed.

S&F 32 mm dia, 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having theRmal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc including taking down old GI tube complete all as specified and directed.

S & F in repair 15 mm bore, gun metal, globe or Gate valves with iron wheel head, Class-I, Pressure Tested of 1.5 Mpa, screwed both ends for iron pipe complete all as specified and directed.

S & F in repair 20 mm bore, gun metal, globe or Gate valves with iron wheel head, Class-I, Pressure Tested of 1.5 Mpa, screwed both ends for iron pipe complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc. complete all as specified and directed

S&F 110mm bore PVC (SWR) pipes single socketed Soil waste and vent pipes in any length with or without ears with rubber ring joints fixed to walls complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes single socketed Soil waste and vent pipes in any length with or without ears with rubber ring joints laid in trenchs complete all as specified and directed.

S&F 75 mm bore PVC (SWR) pipes single socketed Soil waste and vent pipes in any length with or without ears with rubber ring joints laid in trenchs complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends any radius with access doors complete all as specified and directed.

S&F 75 mm bore PVC (SWR) bends any radius complete all as specified and directed.

S & F 75 mm bore PVC (SWR) junction single (Single `T') equal or unequal complete all as specified and directed.

S&F 110mm bore PVC (SWR) vent cowl complete all as specified and directed.

S&F PVC (SWR) gully trap of 125/110 mm dia., outlet with grating including jointing with solvent cement complete all as specified and directed.

M & L for post construction Antitermite treatment by treating At points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed.

Demolition of brick work or stone / boulder masonry, built in cement mortar including all quoins, pillars etc and disposal of debris and rubbish to a distance n.exe 100 m as directed by the Engr-in-Charge.

M&L for Brick work with fly ash Bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as Specified and directed

S & F MS steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes confoRming to I.S. 1161-1979 grade St-240 complete all as speicfied and directed.

S & F Pre-Painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as peRmanufacturer's instruction complete all as specified and directed.

M & L for Preparation of new or previously untreated steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of red oxide zinc chrome primer complete all as specified and directed.

S&F 18 to 20mm thick Green Marble work (table rubbed and polished) in floors, steps, jambs, pillars, window-cills, cooking platfoRms and like bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match with marble shade including 15 mm thick screed bed in cement mortar 1:6 & cutting, moulding, bull nosing,chamfered and polishing complete all as specified and directed.

S&F 10 mm thick toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required complete all as directed.

S & F in repairs 3 mm thick, plain/designed (as approved), coloured, aluminium composite sheet as in wall cladding/roofing/paneling etc including necessary frame work and fittings and fixtures as per the manufacturer's instructions complete all as specified and directed.

Demolition and breaking 150 mm dia., drain pipes (Salt glazed ware, AC or reinforced concrete set in cement mortar, disposal of unserviceable materials, debris and rubbish to a distance not exceeding 100 M as directed by the Engineer in Charge.

M&L for excavating in trenches n exc 1.50 m in width and n exc 1.50 m in depth for foundation, manholes etc as well as n exc 10 Sqm on plan area and getting out in soft/loose soil commplete all as specified and directed.

Demolition of un-reinforced cement Concrete of any description and in any position not otherwise specifically provided for and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 100 M as directed by the Engineer in Charge.

M & L for Plain cement concrete 1:3:6, type C-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete, etc complete all as specified and directed.

M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 mixed with water proofing compound and finished the surfaces even and smooth without using extra cement complete all as specified and directed.

M & L for plain cement concrete (1:2:4), type B-0 (using 12.5mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including necessary foRmwork complete all as specified and as directed.

M & L for Precast Reinforced Cement Concrete 1:2:4, type B-1 (using 20 mm graded stone aggregate) as in cover slab (FoRmanhole etc), chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces and set in cement mortar 1:4 including necessary foRm, moulds, etc complete all as specified and directed by the Engr-in-Charge. (Note : Reinforcement shall be measured and paid separately)

Removing excavated soil to a distance exc. 1.50 Km but n.exc. 5.00 Km and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25cm in soft/loose soil complete all as specified and directed .

M & L Reinforced concrete pipes, class NP2, 200 mm bore, laid and jointed with collars complete all as specified and as directed.

M & L for Plain cement concrete 1:3:6, type C-2 (using 40 mm graded stone aggragate) as in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 200 mm bore SGSW/RCC drain pipes complete all as specified and directed

M & L for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and foRming branch channel (1/2 round or 3/4 round section) in cement concrete 1:2:4 type B1, smooth finished and refoRming benching as required for 150 mm bore of pipe complete all as specifieed and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as directed

M & L for conceled Point wiring with two runs of single core 1.5 Sq.mm. (Nominal area) PVC insulated unsheathed multistranded copper conductor cable FRLSH (ISI marked) drawn through and including non metallic PVC conduit 20 mm bore (Minimum) medium grade (ISI marked) concealed type including metal GI boxes of suitable module including modular white cover plate of suitable module for fixing modular type switches, sockets, regulators etc. including provision of multistranded 1.5 Sq.mm copper conductor cable FRLSH [ISI marked] as earth wire connected to common earth dolly and earth in distribution board complete all as specified and as directed, for one light/exhaust fan/fan point/call bell controlled by one way switch. (Note.: (i) The rate quoted is deemed to include making good the disturbed sufaces and to match the adjoining surface. (ii) The quoted rate is deemed to include cutting chases for concealed wiring including making good the same as per the existing one)

All as per item No. 121 above but for One 3/5 pin socket outlet 6 amps on independent board complete ditto

All as per item No. 121 here in before but for one 15 Amps power point on the independent board with two runs of PVC insulated and unsheathed copper conductor cable of size 2.5 Sqmm multistranded FRLSH (ISI marked) and 2.5 Sqmm PVC insulated unsheathed solid copper conductor cable FRLSH (ISI marked) as earth lead complete ditto

All as per item No.121 here in before but for one 15 Amps power point on the independent board with two runs of PVC insulated and unsheathed copper conductor cable of size 4.00 Sqmm multistranded FRLSH (ISI marked) and4.00 Sqmm PVC insulated unsheathed solid copper conductor cable FRLSH (ISI marked) as earth lead complete ditto

S & F switch modular single pole one way 6 amp 240 volts,1 Module complete all as specified and as directed.

S & F Modular socket outlet 6A, 2/3 pin combined, 2 module, AC 230V, 50HZ complete all as specified and as directed.

S & F switch modular single pole one way 16 amp 240 volts,1 Module complete all as specified and as directed.

S & F Modular socket outlet 6A/16A, 2/3 pin combined, 2 module, AC 230V, 50HZ complete all as specified and as directed.

S&F ceiling rose, 65 X 50mm two to three teRminals, PVC/polycarbonate, insolated body complete all as specified and directed.

S&F Socket Residual Current Device (SRCD) With Steel Enclosure two pin and earth plug including 20 Amps MCB SP complete all as specified and as directed (Make : Havells Cat Part No. DHDDCDP025202003 or equivelant model of make mention in PS)

S&F LED lights fitting 1x 20W, 220V, including lamp AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F LED building security light fitting 35 Watt 230V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including theRmal management in triple optics complete with IP 66 protection with and including 1.5 Sqmm weather proof 3 core FRLH grade copper conductor and 32 mm dia( or higher size as peRmanufacturers recommendation) light grade GI pipe (bend to shape or as peRmanufacturers recommendation ) bracket 1.5 mtr long complete with MS flat iron clamp (clamps shall be 40 x 5 mm MS flat) nuts, bolts & washers including painting the clamps with two coat of aluminium paint over a coat of red oxide primer complete all as specified and as directed

S & F LED outdoor Flood light fittings, 100 Watt, 230 Volts AC ,made up of pressure die cast aluminium housing with toughened glass and high power LEDs and secondary lenses with IP66 protection. with all accessories, internally prewired and connecting up with twin core twisted copper conductor cable of suitable size complete all as specified and directed.

S & F Distribution Board, SPN 12 Way, 240V, Double door with IP 43 protection, IK 09 complete all as specified and as directed.

S & F powder coated sheet steel Distribution Board, SPN 8 Way, vertical , 240V, Double door with IP 43 protection, IK 09 complete all as specified and as directed.

Supply, fixing, commissioning and testing MCB SPN 6-32 Amps, 240 Volts, 10KA, C curve complete all as specified and as directed

Supply, fixing, commissioning and testing MCB SP 6-32A Amps, 240 Volts, 10KA, C Curve complete all as specified and as directed

M & L for Sub main wiring with 2 runs of Single core 2.5 Sqmm [ for Phase & Neutral ] PVC insulated multi stranded FRLSH (ISI marked) copper cable drawn through and including concealed PVC conduit of suitable size (medium grade) with all conduit accesories and fittings along with 1 run of single core 2.5 Sqmm PVC insulated multi stranded FRLSH (ISI marked) copper cable as earth continuity conductor complete all as specified and as directed. (Note :- (i) Two runs of 2.5 Sqmm and one runs of 2.5 Sqmm cable as earth wire and one run of conduit shall be measured as one length, (ii) The quoted rate is deemed to include cutting chases for concealed wiring including making good the same as per the existing one)

M & L for Sub main wiring with 2 runs of Single core 4.0 Sqmm [ for Phase & Neutral ] PVC insulated multi stranded FRLSH (ISI marked) copper cable drawn through and including concealed PVC conduit of suitable size (medium grade) with all conduit accesories and fittings along with 1 run of single core 4.0 Sqmm PVC insulated multi stranded FRLSH (ISI marked) copper cable as earth continuity conductor complete all as specified and as directed. (Note :- (i) Two runs of 4.0 Sqmm and one runs of 4.0 Sqmm cable as earth wire and one run of conduit shall be measured as one length, (ii) The quoted rate is deemed to include cutting chases for concealed wiring including making good the same as per the existing one)

M & L for Sub main wiring with 2 runs of Single core 6.0 Sqmm [ for Phase & Neutral ] PVC insulated multi stranded FRLSH (ISI marked) copper cable drawn through and including concealed PVC conduit of suitable size (medium grade) with all conduit accesories and fittings along with 1 run of single core 6.0 Sqmm PVC insulated multi stranded FRLSH (ISI marked) copper cable as earth continuity conductor complete all as specified and as directed. (Note :- (i) Two runs of 6.0 Sqmm and one runs of 6.0 Sqmm cable as earth wire and one run of conduit shall be measured as one length, (ii) The quoted rate is deemed to include cutting chases for concealed wiring including making good the same as per the existing one)

M & L Earthing complete with GI earth plate electrode 600 mm x 600mm x 6 mm thick burried directly in ground vertically to a depth not less than 2.25 m below ground level with the top edge of earth plate at depth not less than 1.5 m below ground level connected with galvanised earth lead of 4.00mm dia by means of bolts, nuts, check nuts and washers protected by 15mm bore light grade GI pipe, funnel with 20mm bore GI medium grade pipe for watering, wire mesh, including concrete pit in PCC (1:3:6) type C-1, with 40 mm thick Pre-cast R.C.C. (1:2:4) type B-I cover slab (reinforced with 8 mm dia defoRmed bar @ 10 cm C/C both ways and suitable handle of 12 mm dia round bar), including providing charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode, with funnel, wire mesh, aluminium lugs, complete in all respect all as shown in electrical plate No. 3 and other end connected with main switch board or Earthing test point as directed, including necessary earth work and disposal of spoil to a distance not exceeding 50 metre and necessary testing on completion complete all as specified and as directed by the Engineer-in-Charge. Note: On testing after completion if the desired earth resistance is not obtained the earthing will be redone at no extra cost

S & F LED downlight, Recess mounted square, die cast aluminium housing, 15 Watt as per the existing cutout, 160-180mm and making flush and smooth with gypsum board, CCT: WW/NW/CW, CRI > 80 Ra, IP 20 rated, with open and short circuit protections as per IS: 10322 with all accessories and connecting up with twin core twisted copper conductor cable of suitable size including lamp complete all as specified and directed.

S&F exhaust fan 300 mm size, steel body suitable for operation on single phase 240 V AC, 50 Hz and including connecting up with twin core PVC insulated , sheathed flexible copper conductor cable of size 1.50 Sqmm including making good disturbed surfaces to match with surronding complete all as specified and directed.

Supply and fixing vertical electric water heater, storage type, shock resistant steel body, high quality steel inner tank with glasslined Coated with high density PUF insulation, fitted With specially designed acrificial magnesium anode to prevent corrosion due to hard water ,100% copper heating element upto 2 KW, 230 volts, capacity 25 litre, BEE 5 star rated complete with all accessories such as safety valve, theRmostate, NRV, 4 nos fixing bolt of suitable size including nuts and washer etc,2 nos PVC connection pipe and making the electrical connection with and including 16A Plug Top including testing after installation complete all as specified and directed. Make:- Crompton , Havells, Racold , Bajaj,V-Guard Note : Contractor Shall submit manufacturer test report as per BIS before payment.

S & F energy efficent, BEE 5 star rating, low noice, wall mounted osciliating fan 450 mm sweep,1350 rpm, AC, single phase 240 Volts, 50 Hz, copper wound , aluminium blades, approved colour,over load protection with smooth neck tilting provision complete with all accessories and electric connection complete all as specified and directed

Satyanjani Technocracy (BID ID -3457007)

sri sai ram constructions (BID ID -3456377)

SRI THULASI TECH (BID ID -3456930)

SAI SRINIVAS CONSTRUCTIONS (BID ID -3456205)

SOUTHERN BUILDERS (BID ID -3456766)

K V P RAJU (BID ID -3455052)

bhavani constructions (BID ID -3457155)

ANUJ INFRA (BID ID -3457135)