Loading
Loading…
Loading…
Tender Value
₹31.1 L
EMD Value
₹31,100
Closing Date
15 Oct 2026, 5:00 pm7d left
ADDITIONAL CHIEF ENGINEER, P.H DIVISION, SAMBALPUR
Office of the Superintending Engineer, P.H. Division, Sambalpur, Near V.S.S Stadium, Brooks Hill, Dist- Sambalpur-768 001
Construction of Sunken Pump House at WTP, Redhakhol
2026_PHEO_142331_3
SEPHSBP-08/2026-27 Dt. 24.09.2026
National Competitive Bid
Civil Works - Water Works
Percentage
180 days
REDHAKHOL
Please refer Tender documents.
2 documents required · 2 mandatory
₹6,000
₹31,100
Yes
1 Oct 2026
1 Oct 2026
16 Oct 2026
1 Oct 2026
15 Oct 2026
1 Oct 2026
1 Oct 2026 - 5 Oct 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Supplying all materials, labour, T& P and construction of sunken type RCC roof pump house with RCC column structurte of external size 11.70 mtr x 7.40 mtr with 3.50 mtr height with providing flyash brick work of 25.00 cm thick including M.S door & windows, painting the pump house including drawing and design & labour cess as per specification & direction of the Engineer- in-charge. | 86.58 | Sqm | 24,119.69 | ₹20,88,282.76 |
| 2 | Internal Electrification 10% om Item no-1 | 1 | Job | 2,08,828.28 | ₹2,08,828.28 |
| 3 | Supplying all materials, labour, T& P and Fitting, Fixing of electric wire rope hoist with monorail Electrical Travelling Trolley (MI 1-I series as per specification and direction of the Engineer-in-charge. | 1 | No | 3,38,520 | ₹3,38,520 |
| 4 | Supplying & Laying in trenches MS pipes of all Classes conforming to IS:3589 - 2001 & IS:3601 - 2006 of the following outside diameter as per specification complete. (Earthwork in trenches, jointing of pipes, specials and fittings to be measured separately) including cost of pipe, conveyance of all materials to worksite, contractor profit & labour cess etc all complete as per direction of Engineer-in-charge | - | - | - | - |
| 5 | 219.1 mm O.D.M.S.ERW pipe 6.30mm thick) | 100 | Mtr | 2,628.7 | ₹2,62,870 |
| 6 | Providing flanged joints conforming to IS:3114 to Flanged Cast Iron pipes and fittings of the following nominal diamter including testing of joints, cost of bolts nuts and rubber insertion, contractor profit & labour cess etc all complete as per specification and direction of Engineer-in-charge. | - | - | - | - |
| 7 | 200 mm dia M.S. | 20 | Nos | 2,086.5 | ₹41,730 |
| 8 | Supplying all materials, labour, T&P and Flame cutting and facing of MS plate up to 8mm thick as per specification and direction of Engineer-in-charge. | - | - | - | - |
| 9 | Pipe cutting (219.1 mm) | 34.38 | Mtr | 1,162.3 | ₹39,959.87 |
| 10 | Providing joints by welding with two welding beads/pass, conforming to IS:816-1998 (Fillet weld) to MS pipes and fittings at site by using welding generator including testing of joints, as per specification complete and direction of Engineer-in-charge. | 34.38 | Mtr | 2,589.9 | ₹89,040.76 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 4.34 MB
DTCN.pdf
Tender Documents • 1.42 MB
BOQ_611839.xls
BOQ • 0.34 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .