Repairing of RAC Quarters at Class 1/2 Colony, Ta. Dist.Valsad. (Kitchen Repairing Colour Work Door Window Granite Flooring Paver Block and Miscellaneous Work)

Name of Work :-

Repairing of RAC Quarters at Class 1/2 Colony, Ta. Dist.Valsad. (Kitchen Repairing, Colour Work, Door

Window, Granite Flooring, Paver Block and Miscellaneous Work)

Bill of Quantities

(A) Percentage Rate Tender (Up to INR 50 Cr. )

Memorandum showing items of work to be carried out

Ite Quantity Unit Estimated Total Amount

Ite Quantity Unit Estimated Total Amount

No. Item of work In figure estimated

Rs. Ps. quantities

1 Applying two coats of putty & two coats of primer of approved brand and 786.0 Sqmt 40.59

manufacture on new wall surface to give an even shade including

thoroughly brushing the surface free from mortar dropping and other

foreign matter and sand papered smooth.

2 Wall painting (two coats) with plastic emulsion paint of approved brand 704.00 Sqmt 80.35

and manufacture on undecorated wall surface to give an even shade

including throughly brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth.

3 Wall painting (two coats) with plastic emulsion paint of approved brand 344.00 Sqmt 85.76

and manufacture on undecorated ceiling surface to give an even shade

including throughly brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth.

4 Finishing wall with weather proof exterior emulsion paint on wall surface 1103.00 Sqmt 114.53

(two coats) to give an required shape even shade after thoroughly

brushing the surface to remove all dirt, and remains of loose powdered

materials.etc complete

5 Painting Two coats (excluding priming coat) on previously painted steel 30.00 Sqmt 94.82

and other metal surface with enamel paint, brushing to give an even

shade including cleaning the surface of all dirt, dust and other foreign

6 Painting Two coats (excluding priming coat) on previously painted wood 12.00 Sqmt 93.54

and wood based surface with enamel paint, to give an even shade

including cleaning the of all dirt, dust and other foreign matter.

7 Removing, Repairing and Refixing Old existing wooden door shutter 19.00 No 1808.91

including repairing the shutter/frame using Randha machine and

replacing old fixture and fastening with new SS 304 grade fixtures like

Hinges, 1 Stoppers, 1 Aldrop , 2 Handle & 1 lock etc. and as directed by

engineer in charge etc comp.

8 Removing, Repairing and Refixing Old existing Main wooden door shutter 4.00 No 4944.96

including fixing New Europa Main Door Lock and repairing the

shutter/frame using Randha machine and replacing old fixture and

fastening with new SS 304 grade fixtures like 3 Hinges, 1 Stoppers,

Aldrop , 2 Handle & 1 lock etc. and as directed by engineer in charge etc

9 Providing and fixing window having extruded aluminum Colour anodized 22.00 Sqmt 2201.80

section frame main outer size 95.00 mm x 24.10 mm x 1.17 mm (Weight:-

0.738/Rmt) horizontal two track and Vertical member of size 92.00 mm x

31.75 mm x 1.50 mm (Weight:-1.06/Rmt), with Two Glass shutters &

One Shutter Mosquito Net of horizontal member size 40mm x 18mm x

1.29mm ( @ wt.of 0.456Kg/mt), vertical member of size 40mm x 18mm x

1.29mm with 5 mm thick transparent bronze colour tinted float glass

with powder coated aluminum fittings & fixtures and Lock Strip

transparent silicon sealant glass fixing to frame as per details etc

complete for window.W,W5

10 Providing & Fixing in position standard extruded approved colour 3.00 Sqmt 2049.29

anodised Aluminum Ventilator with outer frame 65 x 25 mm Stander Box

Frame with 5mm thick Ground Glass Louvers and Fixed Mosquito Net For

ventilation including all required materials, fixtures, fastenning, labours

and equipments as per detailed drawing as directed. For Ventilators V,V1

11 Providing and fixing 35 mm thick flush door Single shutter, solid core 15.20 Sqmt 3157.26

with Shutter of Factory made & Stamped I.S 12823 Grade one ,Type one

,melamine faced three layred resin Flushed Door Having Decorative

Lamination on both sides & 12 mm T.W.Beading Around the Door,FROM

HOLDING LICENCE FOR MINIMUM 5 YEARS .and stainless steel handle

and necessary Locking system of Godrej, zinc coated hinges ,fixtures &

fastenings etc directed by engineer in charge.D2

12 Providing and fixing FRP frame size 100 x 50 mm and 35 mm thick FRP 6.80 Sqmt 2547.22

depress panel Single shutter having extra reinforcement on sides & edges

in Gel coat finish.The core of the shutter & frame is to be filed up with

injected fire retradat grade polyurethene foam done in situ along with

embeded wooden pieces for stiffening & also taking hinges & fintures.The

whole FRP frame & shutter is to be waterproof, weatherproof ,termite

proof & resistance to mild acid/alkali.Rates are to be inclusive of S.S

hinges with necessary screws & alluminum fixtures & fastenings &

fartener sleeve.Colour and Shade approved by Engineer-In-Charge. D3

13 Providing and fixing Mirror polished 18 mm thick Granite stone in Single 73.70 Sqmt 2966.37

piece with full round edge and polished of approved quality in clading on

Cill & Jambs and around the doors/ windows/ ventilation with 12 mm

thick cement motor CM (1:4) and fixing with cement slurry & adhesive

including moulding of exposed edges as directed by engineering in charge

14 Providinfg and fixing Safty grills of required pattern for windows/ Door 864.00 Kg 109.08

using necessary M.S angle/ M.S pipe, M.S flats and other structural steel

at required spacing including cutting, welding and fabriction etc.

including one coat of primer of approved quality and two coats of oil

painting as per detail drawing etc complete.

15 Providing and Fixing Pre Stitched Fiber Glass Mosquite Net with Fastener 73.00 Sqmt 360.57

tap in four side for all window and other opening with required all

accessories etc. complete.

16 Providing and fixing kitchen platform trolley having three drawers of SS 8.40 Sqmt 14366.24

(IS 304) of required size like thali, katleri, perforated, partition, cupsosar

type in kitchen platform having drawer front side and backside by using

19mm thick all proof plywood of BWR confirming to IS 710 of green or

century make, designs & grooves as directed by architectural

drawings.lamination of 1.0 mm thick in single or double shade of green,

broom or equivalent make of plain or texture finish as directed on all

visible face including on teck wood batten patti and 0.80 mm white

lamination on all non visible faces . The size of SS (IS 304) basket of size 4"

to 18" for thali, dish, katleri, perforated, partition, cupsosar type as

directed including necessary S.S. fittings, handles, nobs, telescopic

channels, etc. as directed

17 Providing and Fixing 6 mm thick Lexan Polycarbonate multi wall roofing 175.00 Sqmt 1441.90

sheet fixed with hilti screw and rubber silicon sealer and alluminium strip

of size 50 x 3 mm etc complete as directed by Engineer in charge.

18 Steel work, welded in built up sections framed work including cutting, 26.00 Qnt 9047.86

hoisting, fixing in position and applying a priming coat of red lead paint.

(A)In beams and joists, channels angles Tees, flats, with connecting plates

or angle cleats as in main and cross beams. Hip and jack rafters, purlins

conneted to common rafters and the like

19 Pro. And fixing single layer water proof gypsum board 12.5 mm thick 243.40 Sqmt 606.95

sections using water proof board of size 1220 mm x 1830 mm x 8.0 mm

suspended by GI suspender channel of size 25 mm x 3 mm with

intermediate channel og size 18 mm x 40 mm x 0.8 mm at 1220 mm

center to center ceiling section of size 40 mm x 35 mm x 0.55 mm at

mm c/c and perimeter channel A of size 20 mm x 27 mm x 30 mm x

mm at edges & drops incl.paper tap sand sofit cleat, anchor fastener,

scoch bolt connecting cleat,joining compound top coat on ceiling

incl.making necy.opening for light fitting,diffuser etc. comp. as per detail

drawing as directed

20 Providing and fixing pre-cast Rubber Dye inter locking concrete block 231.40 Sqmt 686.90

60mm thick with grade of concrete M300 pnumatic compressed/Vibrated

mechanically and as per approved design confieming to IS 15658:

including 35 mm Sand layer for levelling and filling the joint with sand in

proper line and level as per guidelines of IRC : SP 63-2018 etc complete.

In Words Sixteen Lakh Seventy Six Thousand Four Hundred Thirty Five Rupees And Seven Paisa Only.

I/We am /are willing to carry out the work at…………% above/below percent (should be written in figures and words) at the

estimated rates mentioned above amount of my/your tender works out as under.

*Estimated Amount *Estimated Amount

put to Tender Rs. 1676435.07 put to Tender Rs.

Deduction …………….. % below………………… Add ………… % above Rs. …………….

1 The Contractor shall be exhibit board as per government circular No.BDG/3277/1657 N dated 26/01/1997 S (M.GUJ) with

detailed specification and details of work and amount Involved at site without any payment as directed by Engineer-In-

2 All work shall be carried out as per public work department hand book and other specifications of Division or as directed.

3 All columns in the Schedule should be filled in ink & the total of the entries in the last column should be struck by

Contractor under his sign.

4 Rates quoted include clearance of site (Prior commencement of work and its close) in all respects and hold good for work

under all condition, site, moisture/ weather etc.

5 The Boards stating the detailed specification & detailes of Work shal be provided by the contractor as per Government

Resolution T.No.1890-240- Dtd.18/11/1990 and directed by contractor at his own cost immediately on recommanding the

6 Testing of Material Shall be done as per the statement attached with specification,The material IS Tested in GERI by

Executive Engineer Surat and Bill for the testing charges shall be paid by Executive Engineer,1% of the Amount put to

7 1% of the Construction Cost Shall be deducted from the bill Amount of the contract as per the Buildig and other

Construction works walfare cess at 1996(Labour and Employment Department Letter No CWA-2004-1831-M(3)Dated

9/12/2005 notification Of Labour & Employment department dt.03/01/2005 & Labou & Employment Department Letter

8 In Case of RCC items Where there is a change in Grade of Mix or Change as per Actual Mix design the cost of difference of

Cement Difference shall be deducted from the rate of original item at the rate of star rate mentioned in the tender.

9 Contractor are advised to visit site before loading tender rate.

10 Necessary wiring point and drainage point are installed at Site however any modification in electrical installation and

drainage & water supply connection and minor correction to perform experienced in Lab shall be done by contractor at

his risk and cost.

11 The Rates are inclusive of all the taxes (Excluding GST),Transport Charges,Octroi duty and storage Charges up to date.

12 The materials Covered for wiring should be got approved from the Engineer Incharge of the work.

13 GST and Income tax TDS will be deducted at a source while making payments of bills.

14 GST will be paid extra as per Govt. amendment.

15 The Materials on the work shall have to be used and carried out as specified in technical note.

I/We hereby Declare that I/we have Visited the site and fully Exquisite myself/ourselves with the local situation regarding

(A) materials,Labour and other factors pertaininfg to work before submitting tender.

I/We hereby Declare that I/we have carefully Studied the condition of Contracts,Detailed Specification and other tender

Document of this work and agree to execute the same accordingly.

Deputy Executive Engineer

Valsad (R&B) Sub-Division

Signature of Bidder

Executive Engineer

Valsad (R&B) Division