Renovation work of prefabricated bitumen road on the left track from Km 22.400 to 26.000 of Baroda Rajwah-I and Km 38.050 to Km 39.700 of Baroda Rajwah II.

Uprooting Jhunds and Moojs with disposal away from site. as directed by the Engineer-in-Charge.

Brick edging on both side of the road of first class bricks 7 cm wide 11 cm deep laid with mud mortar including labour & supply of bricks finished to the required template and in proper alignment and also including dressing and ramming the excavated earth as directed by the Engineer-in-Charge.

Providing, laying, spreading and compacting stone aggregates of 22.4-53 mm sizes to WBM specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Specified MORD Clause No. 401. as directed by the Engineer-in-Charge.

Providing and applying Tack Coat with bitumen VG-10 using bitumen pressure distributor at the rate of 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Specified MORD Clause No. 503. as directed by the Engineer-in-Charge.

Providing, laying and rolling of Open-Graded Premix Carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared surface. by Mechanical Paver and Hot Mixx Plant all as Specified MORD Clause No. 506 & 509 as directed by the Engineer-in-Charge.

Providing and laying Seal Coat comprising of an application of 6.7 mm size stone chipped premixed with bitumen binder by manual means with VG-10 Grade Bitumen sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C all as Specified MORD Clause No. 508 and as directed by the Engineer-in-Charge.

Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and Laying of Hot Applied Thermoplastic Compound 2.5 mm thick including Reflectorising Glass Beads@ 250 gms per sqm area, thickness of 2.5 mm in exclusive of surface applied Glass Beads as per IRC: 35-2015. The finished surface to be level, uniform and free from streaks and holes and as directed by Engineer-in-Charge.

Providing & Fixing Sign Board/ Stone i/c Excavation, Carriage, Painting, Letter Writting and Errect with C.C. i/c Cost of Labour T&P Material etc. Complection of the Work.as directed by Engineer-in-Charge.