Loading
Loading…
Loading…
| Sl No | Description | Qty | Unit | self L2 | AJISH A M L1 |
|---|---|---|---|---|---|
| 1.00Maintenence of Center No 116 Mannupurayidom anganwadyi | |||||
| 1.00 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 303.84 | kg | 200 ₹60,768 | 191.08 ₹58,057.75 Lowest |
| 1.00 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 186.64 | kg | 160 ₹29,862.4 | 153.3 ₹28,611.91 Lowest |
| 1.00 | 12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 82.12 | sqm | 800 ₹65,696 | 743.34 ₹61,043.08 Lowest |
| 1.00 | 12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05%) total coated thickness, zinc coating 120 grams per sqm as per IS:mm(+0.05%) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/self tapping screws complete:Ridges plain (500-600 mm) | 28.6 | metre | 500 ₹14,300 | 493.12 ₹14,103.23 Lowest |
| 1.00 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) | 0.11 | cum | 8,100 ₹874.8 | 8,040.94 ₹868.42 Lowest |
| 1.01 | 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | 46.97 | sqm | 150 ₹7,045.2 | 143.94 ₹6,760.57 Lowest |
Tender Value
₹1.7 L
EMD Value
₹4,236
Closing Date
25 Mar 2025, 11:00 amClosed
Assistant Engineer
Office of the Assistant Engineer Kangazha
KANGAZHA GRAMA PANCHAYATH PRO NO 231/2024-2025-Maintenence of Center No 116 Mannupurayidam Anganwadi
2025_LSGD_751847_7
T7/AE/LSGD/KA/2024-25
Open Tender
Civil Works - Buildings
Item Rate
Kangazha
please refer Tender Documents
10 documents required · 10 mandatory
₹555
₹4,236
17 Mar 2026
18 Mar 2025
26 Mar 2025
18 Mar 2025
25 Mar 2025
18 Mar 2025
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1218794.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .