REPAIR TO LEAKAGE/SEEPAGE AND ALLIED WORKS AT CERTAIN BLDGS AT MIL STN DHARAMSHALA

Amount

Demolition of cement concrete (Unreinforced) in roofs, floors (other than ground floors) beams, stair cases, landing chajjas and similar suspended work, complete all as spcified and directed by Engr-in-Charge.

Taking up or down GI water tubing of 15mm bore including all connections complete all as spcified and directed by Engr-in-Charge.

Taking up or down GI water tubing of 20mm bore including all connections complete all as spcified and directed by Engr-in-Charge.

Galvanised steel water tubing,15 mm bore, medium grade, with all fittings/ fixtures, complete all as specified and directed by Engr-in-Charge.

All as per item No 04 here-in-above except GI tubing.

Galvanised steel water tubing,20 mm bore, medium grade, with all fittings/ fixtures, complete all as specified and directed by Engr-in-Charge.

All as per item No 06 here-in-above except GI tubing.

Taking down cement plaster on brick or stone or concrete surfaces etc including racking out joints, hacking for key, scrubbing down with water complete, all as specified and directed by Engr-in-Charge.

Rendering 15 mm thick on other than fair faces of brick or concrete surface in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge

Rendering 15 mm thick on fair faces of brick or concrete surface in CM 1:4, finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge

Two coats of all weather exterior paint on walls including prepration of new plastered or unplastered surface, complete all as specified and directed by Engr-in-Charge.

Two coats of oil bound distemper on newly plastered surface of walls including preparation, complete all as specified and directed by the Engr-in-Charge.

Demolition of cement concrete in ground floors & paving not exceeding 15 cms thick (below or above ground level), complete all as specified and directed by Engr-in-Charge.

Plain cement concrete, M-15, 30mm thick, type B-O (using 12.5mm graded crushed stone aggregates) over cement slury @ 3Kg/sqm with WPC complete all as spcified and directed by Engr-in-Charge.

Applying evenly a priming/ tack coat of paving bitumen 85/25 grade @1.20 Kg/sqm complete all as spcified and directed by Engr-in-Charge.

APP (Atactic Poly-propylene polymer) modified membranes, five layered, 3mm thick weighing not less than 3.5 kg/Sqm, having a centre core of polyester non-woven mat (FP) reinforcement dipped into APP modified mix and sealing all the over laps 75mm on length side and 100mm on width side of membranes by torching as per manufacture's instructions by authorised applicator as per manufactureres instructions, complete all as specified and directed by Engr-in-Charge.

Plain Cement Concrete, M-5, type E-2 (using 40mm graded crushed stone aggregates) as in filling of sunken floors and mass concrete, complete all as directed by Engineer-in-Charge.

Dismantling of cast iron pipes, jointed in cement concrete of any size and type complete all as specified and directed by Engr-in-charge.

PVC (SWR) pipe 110mm bore single socketed in any type with rubber ring joint laid in trenches/fixed to walls or floors with solvent solution complete all as specified and directed by Engr-in-Charge.

All as per srl item No 19 here-in-above but 75mm bore.

PVC (SWR) bend, 110mm bore (fixed in repair), any radius, complete all as specified and directed by the Engr-in-Charge.

PVC (SWR) bend, 75mm bore (fixed in repair), any radius, provided with access door, complete all as specified and directed by the Engr-in-Charge.

PVC (SWR) junction single (single T), equal or unequal bend, 110mm bore (fixed in repair), complete all as specified and directed by the Engr-in-Charge.

PVC (SWR) junction single (single T), equal or unequal bend, 75mm bore (fixed in repair), complete all as specified and directed by the Engr-in-Charge.

PVC (SWR) 'P’ trap, 100 /110 mm bore, complete all as specified and directed by the Engr-in-Charge.

75mm bore PVC (SWR) floor trap with grating (in repair) including jointing with solvent cement complete all as specified & directed by Engr-in-Charge.

Oval access door cover 100mm (in repair) complete all as specified & directed by Engr-in-Charge.

Oval access door cover 75mm (in repair) complete all as specified & directed by Engr-in-Charge.

Plain Cement concrete, M-15, 25mm thick, type B-0 (using 12.5mm graded crushed stone aggregate) as in sub base complete all as specified and directed by Engr-in-Charge.

Mat finish (non skid) coloured tiles 7 to 8mm thick, straight edge, Premium Class I grade, area of each tiles exc.0.11 sqm but n.exc 0.18 sqm in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including 15mm thick screed bed in CM 1:6 complete all as specified and directed by Engr-in-Charge.

Demolition of stone slab/ Trezzo/ tilesof any thickness in any position complete all specified and directed by Engr-in-charge.

Coloured Glazed ceremic tiles 300x450x6 to 7mm thick as in vertical surface etc, set, jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over 15mm thick rendering in CM (1:4), complete all as spcified and directed by Engr-in-Charge.

Granite (of any type ) 20mm thick, machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone on kitchen plate form including grinding and polishing over 20mm thick screed bed in CM 1:4 complete all as spcified and directed by Engr-in-Charge.

Taking down chowkhats or frames with shutters (without taking off shutter from the frame) area not exceeding 1.50 sqm each and removing complete, all as specified and as directed by the Engineer-in-Charge.

Factory made PVC solid door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, complete all as spcified and directed by Engr-in-Charge.

Factory made PVC moulded door shutter with particle board core 28 to 30mm thick (stiles) with 2, 4 or 6 raised panel design with 2mm moulded PVC sheet on the front face & 2mm thick plain colour PVC sheet on back face complete all as spcified and directed by Engr-in-Charge.

150mm long aluminium handles, cast type, anodised complete all as specified and directed by Engr-in- Charge.

150mm aluminium, anodised, barrel tower bolts of extruded section and fixed complete, all as specified and directed by Engr-in-Charge.

100mm butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed by Engr-in-Charge.

Steel locking bolt of 100mm size with mild steel electrogalvanised plate and bright bolt not less than 10mm dia,100mm complete all as spcified and directed by Engr-in-Charge.

Demolition of brick/Stone masonry built in cement mortar Complete, all as specified and directed by Engr-in-Charge.

Walling of random rubble stone masonry, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6, complete all as specified and directed by Engr-in- Charge.

All as per item Srl No 42 but except stones.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or steel, concrete or brick surrounded, glazed with oil putty or fixed with beads complete, all as specified and directed by Engr-in- Charge.

3mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in square n.exc.0.50 sqm in each pane complete, all as specified and directed by Engr-in- Charge.

15mm bore CP stop valve (in repair) brass, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as spcified and directed by Engr-in-Charge.

15mm bore Bib taps (in repair) chromium plated, Brass with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as spcified and directed by Engr-in-Charge.

PVC valveless, syphonic action type flushing cistern, crystal white, 10 ltr capacity, superior quality, plunger type, low level, with inlet, ball valve, float and handle, 32mm dia PVC long bend flush pipe 90cm long and 15mm dia 450 ling PVC Connection with CP brass coupling nuts and PVC washers at both ends (fixed in repairs) complete all as specified and directed by Engr-in-Charge.

PVC connection 15mm bore with PTMT nuts (in repair) 600mm long complete all as specified and directed by Engr-in- Charge.

Vitreous chinaware squantting pan, ''Orrisa pattern'', size 580mm x 440mm white, with Cast iron 'P' or 'S' trap, front or back inlet, integral footrest excluding flushing cistern and flush type, etc and making good to floors (fixed in repair) complete all as specified and directed by Engr-in- Charge.

Viterous china wash down water closet pan (Pedestal pattern), white, excluding fixing bolts flushing cistern) including connection to drain and flush pipe, seat and cover, CP jet alonwith 1 mtr long CP insulated flush pipe (fixed in repair) complete all as spcified and directed by Engr-in-Charge.

Towel rail, 600mm long of PTMT fixed with and including CP brass screws (fixed in repairs) complete all as spcified and directed by Engr-in-Charge.

Sheet glass shelf assembly (fixed in repairs) consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard and 03 Nos railing in front & sides 60cm long complete all as spcified and directed by Engr-in-Charge.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including nainital or similar pattern roof covering complete, all as specified and directed by Engr-in-Charge.

Pre-painted galvalume aluminium Zinc coating GI based corrugated steel sheeting 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws complete all as specified and directed by Engr-in- Charge.

Pre-galvalume aluminium Zinc coating GI based plain steel sheeting 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws complete all as specified and directed by Engr-in- Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided, complete all as specified and directed by Engr-in-Charge.

Mild steel work as in wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165, complete all as specified and directed by Engr-in- Charge.

Rolled Mild Steel Section as in main and cross beam, hip and jack rafter, purlins where connected to common rafters, complete all as specified and directed by the Engr-in-Charge.

Dismantling of wall & ceiling boarding (fibre, pulp, insulation etc. or insulation board/slabs/blanket any thickness with nails, including cover fillets and removing from site, complete all as specified and directed by the Engr-in-Charge.

Non asbestos fibre cement building boards, 4mm thick, fixed or laid to wood work, as in ceiling, complete all as specified and directed by Engr-in-Charge.

Two coats of white wash on newely plastered surface on ceilling including prepration of surface, complete all as specified and directed by Engr-in-Charge.

Second class soft wood plain fillets, square, rectangular or triangular in section and secured with nails, sectional area exceeding 6 sqcm but not exceeding 13 sqm complete all as specified and as directed by Engr-in-Charge.

Two coats of synthetic enamel paint over a coat of pink primer on new wood or wooden based surfaces of any description, n. exc. 10cm width or girth including preparation of surfaces complete, all as specified and directed by Engr-in- Charge.

Two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surface of any description excluding 10cm width or girth, complete all as specified & directed by Engr-in-Charge.

Aluminium Snap Grid Frame work for false ceiling of size 605x 605mm including hangers 6mm dia (upto 1200mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40x3mm size and 60mm long and expansion hold fasteners 12.5mm dia, 40cm long, complete including 4mm thick E- board, ISI marked e-board (colour and designed as approved by AGE(I) , complete all as specified and directed by Engr-in-Charge.

Grating doom 100mm dia PTMT complete all as specified and directed by Engr-in-Charge.

Dismantling timber scantling framed work under 40 sqcm as in rails, purlins & rafters complete all as spcified and directed by Engr-in- Charge.

Second class soft wood, clean sawn, unframed work as in scantling, under 40 sqcm in section as in rafters/ rails/purlins etc; complete all as specified and directed by Engr-in- Charge.

All as per ser item No 70 here-in-before but except timber.

Second class soft wood, clean sawn, framed work as in scantling, under 40 sqcm in section as in rafters/ rails/purlins etc; complete all as specified and directed by Engr-in- Charge.

All as per ser item No 72 here-in-before but except timber.

Preparing surfaces of wood and wood based materials new or old, of any description and girth, not other wise described and treated with two coats of creosote oil complete all as specified and directed by Engr-in-charge.

vivek and co

KISHAN CONTRACTOR