ADDN/ALTN IN TOILET OF OFFICER MESS AND PROVISION OF CERTAIN WORKS IN EQUIPMENT ROOM AND POWER ROOM AT AFNET AF STN BOWALI.

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed.

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 for backing of Dado/ Skirting, complete all as specified and directed.

M&L Glazed ceramic tiles coloured in vertical surface 600X300X7mm thick , set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L non skid ceramic tiles 7-8mm thick coloured (Square/rectangular) area of each tiles exceeding 0.18 sqm but n exc 0.36 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for screed bed or bedding layer of mortar15 mm thick for laying floor finishes etc in Cement Mortar 1:6 complete all as specified and directed.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc.laid, bedded and pointed in any mortar all as specified and directed. .

S&F 16-18 mm thick Granite (Jet Black) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified.

M&L Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified.

Taking up or down 15 mm bore steel steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and as directed by Engineer - in - Charge.

Taking up or down 20 mm bore steel steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and as directed by Engineer - in - Charge.

Supplying and laying of 20 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Supplying and laying of 25 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth, complete all as specified and directed.

S&F in repairs CP brass Soap dish, fixed to walls with chromium plated (CP) brass screws complete all as specified and driected.

S&F in repair 15mm bore angle valve with wall flange , cast copper alloy, chromium plated fancy type screwed for 15 mm iron pipe, complete all as specified. ( Make : Cera, Cat.No.F1021201)

S&F in repair 15mm bore single lever basin mixer with 300 mm extended body and 600 mm braided connection pipe (without pop-up) for mixing hot & cold water screwed down for iron/cpvc pipe and fixed by authorised company worker, complete all as specified and directed.( Make : Cera, Cat.No.F1021452)

S&F in repairs 15mm Bib Tap long nose with wall flange and aerator, chromium plated fancy type long shank screwed for Iron Pipe or for brass ferrule complete all as specified and as directed.(Make : Cera, Cat.No: F1021151)

S&F 5 mm thick glass LED mirror with touch switch of size 800 x 600 mm with decorative high bright LED strip, Touch switch for LED light, double coat for protection and longevity and silver plating on the back for better reflection and fixed with chromium plated brass screws and cup washers fixed by authorised company worker complete all as specified and directed.(Make : Cera, Cat No : B3530105)

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and directed.

S&F Corner glass shelf assembly of size 225 x 225 mm consisting of 5.5 mm thick sheet glass shelf with chromium plated bracket guard and railing, complete all as specified and directed.(Make : Cera, Cat.No: F1021151)

S&F PVC connections 15mm dia , 450mm long, , with PTMT nuts & washers at both ends complete all as specified.

S&F Brass Chromium plated Towel Rack with Hook 60 cm long between flanges,complete all as specified and directed.(Make : Cera, Cat.No: F5015131CH)

S&F Brass Chromium plated Towel Ring ,complete all as specified and directed.(Make : Cera, Cat.No: F5002105)

S&F Brass Chromium plated Tumbler holder ,complete all as specified and directed.(Make : Cera, Cat.No: F5002107)

S&F in repair Vitreous China, Platinum Thin rim table top wash basin , size 550mmx400mmx160mm including waste coupling with pop-up push type and waste bottel trap of 32 mm dia fixed by authorised company worker complete all as specified and as directed by Engineer-in-charge. ( Make : Cera, Cat.No: S2020102PL)

Supply and fixing in repair One Piece EWC with seat cover and Twin Flush Fittings water closet of colour snow white of size 650 x 355 x 745 mm, with 'P' or 'S' trap including connection to drain or out going pipe and to flushing pipe , closed pattern with recessed bottom, and with slim soft close seat cover fixed by authorised company worker complete all as specified and as directed by Engineer-in-charge. (Make : Cera, Cat.No: S1013222 CHARM 6D)

Supply and fixing Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F Hat pegs, Aluminium solid body, 125mm to 175 mm complete all as specified & directed

M&L for 75mm dia PVC floor trap, with grating including jointing with solvent cement, complete all as directed and specified

S&F for 75 mm bore PVC (SWR) bends of any radius, complete all as specified and directed.

S&F for 75 mm bore PVC (SWR) vent cowls all as specified and directed. .

S&F for 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.

S&F for 110 mm bore PVC (SWR) bends of any radius with access door all as specified and directed. .

S& F for 110 mm PVC (SWR) vent all as specified and directed.

S&F for 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.

Taking down Chowkats or frames not exceeding 1.5 Sq. M each but with shutters (Without taking off shutters from the frames) all as specified and directed.

Taking down chowkat or frames but with shutters( without taking off shutters from the frames) exc 1.5 Sqm and n exc 4 Sqm each all as specified and directed.

Supply and fixing Anodised aluminium powder coated of any colour,frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified (Thickness or powder coating not less than 50 micron).

Supply and fixing Anodised aluminium powder coated of Approved colour, window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified. (Thickness or powder coating not less than 50 micron).

S&F of 5.0 mm thick sheet glass ,ordinary quality and size exc 0.50 Sqm and fixed to door/window shutter and partition wall by means of glazing clips rubber strips etc.

S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge.

S&F Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or galvanized wire staples complete all as specified and directed .

M&L for RCC (Nominal Mix) type B1, 1:2:4, using (20 mm graded stone agg) for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed.

S&F Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, slab and hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified

Use and waste formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. and flat fair finished surfaces, complete all as specified and directed.

Demolition of brickwork/stone boulders, masonary built in cement mortar incl all quoins, arches,pillars,etc. but excl ashlar facings, dressed stone works & precast concrete surfaces.

M&L brick work with sub class 'B' bricks old size best quality bricks straight or curved on plan exc 6 M mean radius built in CM (1:4) all as specified and directed.

M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified.

S&F in repair vitreous china Urinal with integrated EFS of size 360 x 330 x 740 mm in snow white colour, having both pre & post flush water of qty 0.75 liter/flush, maximum sensing range of 300mm operated by 4x1.5 V AA Duracell Batteries which gives life upto 1 Lacs flushing cycles with complete accessories Set, CP Waste Coupling, waste bottel trap etc. fixed by authorised company worker complete all as specified and directed.(Make : Cera, Cat No : S4010101)

S&F Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed.", complete all as specified.

M&L for 15 mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces finished fair and even complete all as specified and as directed by the Engineer-in-Charge.

M&L for preparation of newly plastered surfaces and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and icluding priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm over new prepared surface complete all as specified including necessary scaffolding arrangement and as directed by Engr-in-Charge.

M&L rendering 10mm thick in CM (1:6) on fair faces of brick work or concrete surfaces to be finished even and smooth (without using extra lime or cement, complete all as specified and directed.

M&L for preparing newly plastered surfaces of walls and applying 2 coats of oil bound distemper emulsion including a coat of alkali resistant primer over 3mm thick wall care putty, complete all as specified and directed.

M&L Complete removal of existing treatment on surface of wall and applying 2 coats of oil bound distamper emulsion including a coat of alkali resistant primer over 3 mm thick wall care putty, complete all as specified and directed.

M&L for rendering 5 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:3 and finished smooth and even in ceiling without using extra cement all as specified and directed. .

M&L for preparing newly plastered surfaces of ceilings and applying three coats of white wash all as specified and directed. .

M&L for preparing old plastered surfaces of ceilings and applying two coats of white wash incl complete removal of old plastered surfaces all as specified and directed. .

M&L in repair for providing E-boards, ceiling, 4 mm thick with J framed work with main Tee of size 24 x 28.5 mm made out of PGI sheet .3 mm thick double at web and single at flange, flange coverd with powder coated sheet 0.25 mm thick and wall angle 24 x 24 x .45 mm powder coated for ceiling ,prepainted ceiling boards 60cm x 60cm x 4mm thick , suspended with GI wire 2mm dia and 2m average length with adjustable hanging device complete including plugging in brick/stone walls with steel rawl plug @ 600 mm C/C Ceiling board shall be pressed to the ceiling tee with staple clips at all four sides incl making good all the disturbed portion complete all as spd & directed by AGE(I)/Eng-in-Charge.

S&F aluminium extruded section body, door closer hydraulically regulated, designation No. 1, universal type, suitable for door shutters of 700mm in width and of weightnot more than 35kg and fixed all as specified and directed.

S&F Providing cupboard cabinet with shutter complete in required sizes made out of 18 mm thick one side decorative lamination & other side white balancing lamination sheet consisting of carcass 18 mm thick PVC sheet & provision of shutters and panels made out of 18 mm thick one side decorative laminated PVC sheet all brackets 5.5 mm screws etc. All the edges shall be covered with 2 mm thick PVC edge bonding tape of 90 degree edge bend finish as per make and specification mentioned as per drawing and specification approved by Engineer-in-Charge complete all as specified.

All same as per Sl No. 62 here-in-above, but both sides white lamination all as specified and directed.

S&F stainless steel L hinges all as specified and directed.

S&F stainless steel handles 100 mm long fabricated type, bright polished decorative type fixed with brass screws all as specified and directed. .

S&F magnetic catcher all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in hard dense soil all as specified and directed.

Returning, filling in incl spreading, leveling, watering and well ramming in layers n.exc 25 cm thick in soft soil all as specified and directed. .

Removing excavated material n exc. 50 m and deposting where directed at a level n exc 1.5 m above the starting point all as specified and directed. .

Materials and Labour for Extra for forming fair finishing to surfaces drain/channel 30 cm inner girth in cement concrete ,using extra cement incl forms, moulds etc complete all as specified and directed.

M&L 100 mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in as in sub base all as specified and directed.

S&F 110 mm bore PVC (SWR) soil, waste, vent pipes single socketed in any length with rubber ring joints fixed to walls all as specified and directed.

M&L for cement concrete type B1 1:2:4 (using 20mm graded aggregate) as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, fixing of holdfast, plinth courses , string courses, lacing courses parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as spectified and directed.

Supply and fixing 4 mm thick aluminium composite panel (coloured sheet) and in additional other accessories for fitting complete all as specified by Engr-in-Charge.

S&F of 300 mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F 200 mm long Aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and directed.

S&F Mild steel plates, plain or chequered, 5mm thick or over inthickness in available sizes, complete all as specified and directed.

S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

M&L for preparation of new steel surface over 10 cm in width or girth and applying two coat of black japan paint complete all as specified and directed.

S&F of Fire Retardent 27mm thick wpc louvers panels 8 inch width, 9.6 feet length, as per approved Brand Leben Shade-wenge for ceiling, complete all as specified and directed by Engr-in-Charge.

Ramsons (BID ID -3146993)