PROVN OF BOUNDARY WALL AROUND BLDG NO NP-02 AND NP-03 AT AHMEDABAD CANTT

Amount

Excavation in trenches n.exc 1.5 M wide & n.exc 1.5 M in depth in soft and loose soil for foundation etc n.exc 10 Sqm on plan and getting out complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering & well ramming in layers not exc 25 cm in hard /dense soil complete all as specified and directed.

Removing excavation material exc 250m but n.exc 500m & deposited where directed at a level n.exc 1.5m above the starting point complete all as specified and directed.

M&L for plain cement concrete 1:4:8 type D2 using 40mm graded stone aggt as in foundation filling & massc concrete complete all as specified and directed.

M&L for AAC block wall straight or curved on plan exc. 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for 15mm thick in CM (1:4) on brick work or concrete surface mixed with water proofing compound incl chajja facia etc finished surface even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surface of wall and applying two coat of cement based paint over a coat of primer complete all as specified and directed.

S&F louvers / Precast RCC Jalli, 50mm thick (measured solid) including all moulding and necessary frame work in PCC 1:2:4 type B0 (using 12.5 graded aggregate) set in cement mortar 1:4 complete all as specified and directed.

M & L for RCC type B1 1:2:4 (20mm graded aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span incl necessary form work complete all as specified and directed.

S&F high strenth deformed TMT steel bars 10mm dia & over, cut to length bent to shape required including cranking, bending spirally for hoping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to complete all as specified and directed.

All as per item No 10 above but 6mm to 8mm dia in stirrups spaces.

Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe410-W (Gde-E-250) quality A complete all as specified and directed.

S & F pintle hinges and similar small article confirming to Fe 290 Gde E 165 complete all as specified and directed.

M&L for preparation of old steel surface of any description over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.

ALPINE CONSTRUCTIONS