Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.6 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹34.6 L+₹1.3 L (3.79%)Rejected-AOC | L2 | Rejected-AOC Other than lowest bidder | |
| 3 | L3₹34.7 L+₹1.3 L (3.97%)Rejected-AOC | L3 | Rejected-AOC Other than lowest bidder | |
| 4 | L4₹34.8 L+₹1.4 L (4.23%)Rejected-AOC | L4 | Rejected-AOC Other than lowest bidder | |
| 5 | L5₹41.7 L+₹8.4 L (25.1%)Rejected-AOC 96 SECTOR 16 A CHANDIGARH 160015 | CHANDIGARH | CHANDIGARH | 160015 | L5 | Rejected-AOC Other than lowest bidder |
Tender Value
Refer Docs
Closing Date
2 Jun 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE (AF) Chandigarh
HQ CWE(AF) Chandigarh
IMPROVEMENT OF OMQS (PHASE I) AT AF STATION HIGHGROUNDS UNDER AGE(I) AF HIGHGROUNDS
2022_MES_521638_1
CWE/AF CHD/CHD/T-05/2022-23
Open Tender
Civil Works
Item Rate
180 days
Chandigarh
As per NIT
8 documents required · 8 mandatory
₹500
AGE(I) AF Highgrounds
Exempted
16 Jun 2022
4 May 2022
9 Jun 2022
4 May 2022
2 Jun 2022
19 May 2022
60 days
Amount
BUILDING WORK
Dismantling brick tiles or terracing tiles, single layer on roof including segregating and stacking serviceable brick tiles and removal of unserviceable brick tiles / brick bats and rubbish outside defence land, complete all as specified and directed.
Demolition of cement concrete of any description and in any position not otherwise specifically provided for including removal of debris out of defence land complete all as specified and directed
Taking down existing bitumen felt roof treatment including cement mortar bedding layer, cleaning the surface and removing rubbish off the premises i.e MOD land, complete all specified and directed.
Demolition of mud phuska on roofs, any thickness, including plaster and leeping plaster and bottom layer of polythene film if any, including removal of retrieved material outside defence land, complete all as specified directed.
Material and labour for roughening surfaces of old concrete slab by picking/wire brush, sweeping clean and washing down with water to remove dust etc. and brushing neat cement slurry @ 3.00 Kg/Sqm on roof surface, removal of rubbish outside defence land, complete all as specified and directed
Material and labour for plain cement concrete (1:2:4) type B-1 using 20mm graded crushed stone aggregate as in padding on roof, in required thickness to maintain desired slope, finished even and fair to receive tiles/ APP membrane, complete all as specified and directed.
Material and labour for rendering 15mm thick in cement mortar (1:4), using water proofing compound as per manufacturer's instructions, on brick/concrete surfaces of walls, finished even and fair , complete all as specified and directed. Note :- 1. Supply only water proofing compound will be measured and paid for separately.
Material and labour for water proofing treatment of RCC roof consisting as under:- (a) Applying evenly a coat of bituminous primer conforming to IS-3384:1986 @ 0.30litre/Sqm including preparation of roof surfaces (b) A layer of 3mm thick APP polymeric membrane of weight not less than 3.60Kg/sqm, reinforced with polyester non-woven fabric (weight not less than 160 gm/sqm), duly sealed at over laps (100mm side lap and 150 mm end lap ) & joints with flame (by torch application) (c) Finally applying a coat of solar reflective bituminous aluminium paint @ 1Kg/sqmtr all as per manufacturer's instructions , complete all as specified and directed.
Material and Labour for 40 mm thick brick tiles laid over and including 15 mm thick cement screed bed in CM (1:6) using grey cement and grouted and pointed flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement, laid on concrete roof, complete all specified and directed.
All as per serial item No 1.09 here-in-before (but except brick tiles), complete all as specified and directed. Note : (i) Old serviceable tiles as obtained from Serial item No 1.13 here-in-before shall be reused. (ii) The cost of cleaning and washing of brick tiles for re-use, shall be deemed to be included in the unit rate quoted by the tenderer.
Disconnecting existing water tanks of capacity exceeding 250 ltrs but not exceeding 500 ltrs, draining out of water, setting aside (or lowering if required) for repair/cleaning and removing accumulated sluge/dirt scales from tank bottom, side and from mouths of circulating pipes of service tanks located on roof of building and disinfecting the tank using bleaching powder to make the tank bacteria free, writing by stencil date of cleaning of tank with white synthetic enamel paint on black ground "Cleaned on (date)" height of words 100 mm, and hoisting if required, refixing and reconnecting in position after cleaning complete all as specified and directed.
Disconnecting existing water tanks of capacity exceeding 250 ltrs but not exceeding 500 ltrs, draining out of water, setting aside (or lowering if required) for repair/cleaning and removing accumulated sluge/dirt scales from tank bottom, side and from mouths of circulating pipes of service tanks located on roof of building and disinfecting the tank using bleaching powder to make the tank bacteria free, writing by stencil date of cleaning of tank with white synthetic enamel paint on black ground "Cleaned on (date)" height of words 100 mm, and hoisting if required, refixing and reconnecting in position after cleaning complete all as specified and directed. .
Dismantling existing water tanks of size exc 250 Litre but n.exc 500 litre capacity and removal from site to store for reuse or credit, complete all as specified and directed.
Dismantling existing water tanks of size exc 500 Litre but n.exc 1000 litre capacity and removal from site to store for reuse or credit, complete all as specified and directed.
Supply and fixing/hoisting, rotational moulded polyethylene (HDPE) water storage tanks (cylindrical vertical with closed top), 500 litres capacity ‘double layered’, hoisted and fixed in position including inlet, outlet and drain pipe with plug, complete all as specified and directed.
Supply and fixing/hoisting, rotational moulded polyethylene (HDPE) water storage tanks (cylindrical vertical with closed top), 500 litres capacity ‘double layered’, hoisted and fixed in position including inlet, outlet and drain pipe with plug, complete all as specified and directed.
Supply and fixing in repairs PTMT ball valves, suitable for 20 mm bore iron pipe, (weight not less than 210 grams), ISI marked, high pressure, with high density plastic ball , with epoxy coated aluminium rod, complete all as specified and directed.
Supply and fixing in repairs PVC lid with clips, screws, locking device complete, suitable for 500 litre capacity PVC water storage tanks, cylindrical closed top, complete all as specified and directed.
Supply and fixing in repair Gun-metal globe or gate valves, with iron wheel head, screwed down, high pressure,heavy duty, ISI marked , screwed both ends for iron pipe or for unions of 20 mm bore complete all as specified and directed.
Supply and fixing in repair Gun-metal globe or gate valves, with iron wheel head, screwed down, high pressure,heavy duty, ISI marked , screwed both ends for iron pipe or for unions of 20 mm bore complete all as specified and directed.
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises including removal of debries out of defence land complete all as specified and directed.
Material and labour for 25 mm thick plain cement concrete (1:2:4) type B-0 using 12.5 mm graded crushed stone aggregates as in floor, finished the surface even & rough to receive the bedding mortar, complete all as specified and directed.
Material and labour for first quality Non Skid joint free ceramic coloured tiles 7 to 8 mm thick, (square/rectangular), area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, as in floors etc, set and jointed in neat cement slurry @ 3 Kg/Sqm and pointed in white cement mixed with pigment or coloured cement to match the shade of tiles, over and including 15 mm thick screed bed/bedding layer in CM (1:6), complete all as specified and directed.
Material and labour for First quality with digital glossy finish, glazed ceramic coloured tiles of size 350 mmx450 mm x 8 mm thick, joint free on vertical surface, set and jointed in neat cement slurry @ 3Kg/Sqm, and including pointing in white cement mixed with pigment or coloured cement to match the shade of tiles including 10 mm thick cement mortar as in backing coat of tile in cement mortar 1:4, complete all as specified and directed.
Material and labour for Double Charged first quality vitrified ceramic coloured tiles 10 mm thick, (square/rectangular), area of each tile exceeding 0.36 Sqm but not exceeding 0.42 Sqm, as in floors etc, set and jointed in neat cement slurry @ 3Kg/Sqm and pointed in white cement mixed with pigment or coloured cement to match the shade of tiles including 15 mm thick screed bed of cement mortar 1:6, complete all as specified and directed.
Material and labour for Double Charged first quality vitrified ceramic coloured tiles 10 mm thick, (square/rectangular), area of each tile exceeding 0.36 Sqm but not exceeding 0.42 Sqm, as in skirting etc, set and jointed in neat cement slurry @ 3Kg/Sqm and pointed in white cement mixed with pigment or coloured cement to match the shade of tiles including 10 mm thick rendering of cement mortar 1:4, complete all as specified and directed.
Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar complete all as specified and directed.
Material and labour for 18 to 20 mm thick Granite (of any type) work (table rubbed and polished) fine grained zed black/red as on cooking platforms, window cills, steps and like, set in neat grey cement slurry @3Kg/Sqm, laid over and including 15 mm thick screed bed of cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed.
Material and labour for Machine cut Kota stone slab 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and Screed bed or bedding layer of 15 mm thick in CM 1:6 complete all as spcified and directed.
Material & Labour for machine cut Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid and jointed with neat cement slurry, over and including 10 mm thick rendering of Cement Mortar (1:4) including pointing in white cement with pigment to match the shade of stone slabs, complete all as specified and directed.
Supply and fixing in repairs Vitreous China wash down water closet (pedestal pattern), white pedestal pan and trap (excluding fixing bolts, flushing cistern and flush pipe) including connected to drains outlet, complete all as specified and directed by Engineer - in -Charge.
Supply and fixing in repairs Vitreous China squating pan, 'Orissa' pattern, size 580 mm x 440 mm white, with integral foot rests, including 100 mm cast iron 'P' or 'S' trap and 100mm cast iron sanitary connection socket to fit WC outlet including connection to trap, to flushing pipe, anti-syphonage pipe etc. complete including making good to floor complete all as specified and directed.
Supply and fixing in repair hand shower (Health faucet) cast copper alloy chromium plated , including 8 mm dia 1.00 meter long PVC flexible tube with hook complete all as specified and directed.
Supply and fixing 10 litre capacity virgin polypropylene (PVC) low level flushing cistern, ISI marked, white or coloured, valve less syphonic action type, with inlet, ball valve, float and handle, complete including PVC bend/ flush pipe, brackets and making all connections, fixed as in repairs and removal of old from site to store for reuse or credit, complete all as specified and directed.
Supply and fixing in repairs PVC connection 15 mm size of length 600 mm with PTMT nuts , complete all as specified and directed.
Supply and fixing angle cock/stop valves, cast copper alloy, fancy type, chromium plated, screwed down high pressure, with crutch or butterfly handle screwed for iron pipe or for brass ferrule 15 mm bore dia, fixed as in repair, including removal of old to store for reuse or for credit, complete all as specified and directed.
Supply and fixing bib tap long body with flange, cast copper alloy, fancy type, chromium plated, screwed down high pressure, screwed for iron pipe or for brass ferrule 15mm bore dia, fixed as in repair, including removal of old to store for reuse or for credit, complete all as specified and directed.
Taking up or down 15 mm bore steel tubing with connections or fittings from wall, ceiling, and floor etc., including removal from site, complete all as specified.
Taking up or down 20 mm bore steel tubing with connections or fittings from wall, ceiling, and floor etc., including removal from site, complete all as specified.
Supply and fixing galvanized steel water tubes 15 mm bore, medium grade, with all standard fittings such as sockets, bends, elbows, tees etc, concealed/on surface, fixed to walls and ceiling or laid in floors, complete all as specified and directed. Note : Cutting chases as required shall be measured and paid separately.
Supply and fixing galvanized steel water tubes 20 mm bore, medium grade, with all standard fittings such as sockets, bends, elbows, tees etc, concealed/on surface, fixed to walls and ceiling or laid in floors, complete all as specified and directed. Note : Cutting chases as required shall be measured and paid separately.
Supply and fixing galvanized steel water tubes 25 mm bore, medium grade, with all standard fittings such as sockets, bends, elbows, tees etc, concealed/on surface, fixed to walls and ceiling or laid in floors, including taking up or down steel tubing with connections or fittings from wall, ceiling, and floor etc., including removal from site, complete all as specified and directed. Note : Cutting chases as required shall be measured and paid separately.
Supply and fixing galvanized steel water tubes 40 mm bore, medium grade, with all standard fittings such as sockets, bends, elbows, tees etc, concealed/on surface, fixed to walls and ceiling or laid in floors, including taking up or down steel tubing with connections or fittings from wall, ceiling, and floor etc., including removal from site complete all as specified and directed. Note : Cutting chases as required shall be measured and paid separately.
Fixing only old steel water tubing, 15 mm bore pipe, with all fitings in new or old position (walls, ceiling, floors etc), complete all as specified and directed. Note : Old steel tubing shall be fixed after proper checking, cleaning washing, bleaching etc.
Fixing only, old steel water tubing, 20 mm bore pipe, with all fitings in new or old position (walls, ceiling, floors etc), complete all as specified and directed. Note : Old steel tubing shall be fixed after proper checking, cleaning washing, bleaching etc.
Cutting chases for concealed water tubing or concealed conduit wring etc in brick walls and making good, cutting not exc 10 cm girth, complete all as specified and directed.
Supply and Fixing door seal 50 mm wide and 1 metre in length built in aluminium black plate with nylon brush fixed with screws, complete all as specified.
Supply and fixing Vitreous china wash hand basin, white, flat back, size 550mm x 400mm, including brackets and cutting for and pinning in ends of brackets, complete including CP brass waste coupling, PVC waste pipe, brackets & including taking down old and removal of old from site, complete all as specified.
Supply and fixing in repair Wall mixer with L bend (provision for over head shower), cast copper alloy, chromium plated for mixing hot and cold water, screwed down for 15mm bore iron pipe, complete all as specified and directed. Make: Cat No. 8675 of PRAYAG or equivalent in Parryware/CERA/ MARC Sanitation
Supply and fixing in repair 15 mm dia Brass CP Sink mixer (wall mounted) for mixing hot & cold water, complete all as specified and directed.
Supply and fixing in repair Rectangular Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long, fixed with PVC rawl plugs and wooden screws, complete all as specified and directed. Make: PRAYAG/ Parryware/ Cera/MARC Sanitation
S&F Corner glass shelf of radius 300 mm including 02 Nos metallic holding brackets, railing etc. fixed with PVC rawl plugs and wooden screws, fixed in repairs, complete all as specified and directed. (Make: PRAYAG/Parryware/Cera/ MARC Sanitation)
Supply and fixing in repair soap dish brass, chromium plated fancy type fixed to plugs with chromium plated brass screws, complete all as specified and directed. . Make :Prayag/ Parryware/Cera/ MARC Sanitation
Supply and fixing in repairs Chromium plated shower rose with or without swivel joints, 125 mm size, including fixing to steel pipe or union, complete all as specified and directed.
Supply and fixing in repairs Stainless steel sink with drainage board made of 1.00 mm thick sheet for kitchen with plugs washers & wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm with bowl size 410mmx330mmx160mm, with and including PVC waste pipe and CP waste coupling 32 mm, complete all as specified directed.
Supply and fixing in repair, Kitchen plate rack made of stainless steel 1 mm thick sheet, with plugs, washers, overall size of 75cm x 75 cm including fixing to wall and all accessories, complete all as specified and directed Make: Neelkanth/Jaina/Prayag/Nirali
Supply and fixing in repair PVC cabinet mirror of size 400 mmx500 mm as approved by Garrision Engineer complete all as specified and directed.
Supply and fixing concealed stop cock regular body with flange, cast copper alloy, fancy type, chromium plated, screwed down high pressure, screwed for iron pipe or for brass ferrule 15 mm bore, fixed as in repair, including removal of old to store for reuse or for credit, complete all as specified and directed.
Supply and fixing in repairs Towel rail 600mm long, 20mm dia, 'D' type, brass chromium plated, fixed to walls with steel screws and plastic cleats, complete all as specified and directed. Make : Prayag/Parryware/ CERA/ MARC SANITATION
Supply and fixing in repairs brass chromium plated grating doom 125 mm dia with or without hole complete all as specified and directed. Make : Prayag/Parryware/ CERA/ MARC SANITATION
Taking down eaves gutter and rainwater pipes (any size or pattern), including all fittings complete all as specified and as directed.
Supply and fixing in repairs 110 mm bore PVC (SWR) pipes, single socketed, in any length, with rubber ring joints, fixed to wall and making good the disturbed mouth of rain water pipe, complete all as specified and directed.
Supply and fixing in repairs 110 mm bore PVC (SWR) bends , fixed to pipes with adhesive, complete all as specified and directed.
Supply and fixing in repairs stack clamps out of 50 mm x 5 mm flat iron and 16 mm dia round iron stays for 100 mm bore pipe, including bolts and nuts and securing ends of stays to wall or roof, complete all as specified and as directed.
Dismantling of cast iron or reinforced concrete drain pipes, 75/100 mm dia pipe jointed in cement mortar and taking out of trenches, if required complete all as specified and directed.
Supply and fixing in repairs 75 mm cast iron floor trap with CP grating including jointing to waste pipe, and set in cement concrete type B1 1:2:4 as required, complete all as specified and directed.
Supply and fixing 75 mm dia cast iron soil waste and vent pipes (sand cast), in any length, with or without ears, including cement jointing, laid in trenches or in floors including necessary earthwork excavation, returning ,filling and removal as required, complete all as specified and directed.
Supply and fixing 75 mm dia cast iron soil waste and vent pipes (sand cast), in any length, with or without ears, including cement jointing, fixed to wall with and including mild steel clamps and bolts & washers, complete all as specified and directed.
Supply and fixing 100 mm dia cast iron soil waste and vent pipes (sand cast), in any length, with or without ears, including cement jointing, laid in trenches or in floors including necessary earthwork excavation, returning ,filling and removal as required, complete all as specified and directed.
Supply and fixing 100 mm dia cast iron soil waste and vent pipes (sand cast), in any length, with or without ears, including cement jointing, fixed to wall, complete all as specified and directed.
Supply and fixing in repairs 75 mm cast iron Bends (any radius),diminishing pieces or tapers (larger bore measured) with oval access door complete all as specified and directed.
Supply and fixing in repairs 75 mm cast iron Bends (any radius) with duck's foot or heel rest complete all as specified and directed.
Supply and fixing in repairs 100 mm cast iron Bends (any radius) with duck's foot or heel rest complete all as specified and directed.
Supply and fixing in repairs 100 mm cast iron T-single (equal or unequal), ordinary or inverted (spigot or socket type)or with parallel branches complete all as specified and directed.
Supply and fixing 100 mm cast iron Sockets (double) collars complete all as specified
Demolition of lime concrete /lean concrete/ brick bats (above ground level) in sunken portion of slab, including removal of rubbish outside MoD land, complete all as specified and directed.
Water proofing treatment to sunken portion of WCs, bathroom etc. by applying coating of cement slurry mixed with Acrylic based polymer modified cementitious composite compound of make as approved inTechnical instruction 5/ 2003 as detailed hereunder:- (a) Applying 15 mm thick plaster (1:4) in cement sand mortar with integral water proofing compound 2% by weight of cement on floor and wall, finishing the surfaces even and smooth wiithout using extra cement. The surface shall then be cured and allowed to dry. (b) First layer of slurry of cement @ 0.488 Kg/Sqm mixed with Acrylic based polymer modified cementitious composite compound @ 0.253 Kg/Sqm. This layer will be allowed to air cure for 4 hrs. (c) Second layer of slurry of cement @ 0.242 Kg/Sqm mixed with Acrylic based polymer modified cementitious composite compound @ 0.126 Kg/Sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.
Material and labour for providing cement concrete (1:2:4) type B-1 using 20mm graded crushed stone aggregates including integral water proofing compound @ 3% by weight of cement , as in padding in sunken portion of floor slab, coving to junction of floor and vertical walls, including chamfering on edges, finishing the surface fair and even without using extra cement, complete all as specified and directed. Note:- Supply only integral water proofing compound will be measured and paid for separately.
Supply and fixing galvanized steel water tubes, 40mm bore, medium grade, as in spout for sunken floor, fixed in walls , inside end fixed with wire netting and external end made bevelled at 45 degrees complete all as specified and directed.
Material and labour for plain cement concrete 1:5:10 type E-2 using 40mm graded crushed stone aggregate as in sunken portion of slab, finished the surface even & fair, complete all as specified and directed.
Demolition of Reinforced cement concrete of any description and in any position not otherwise specifically provided for including removal of debris out of defence land complete all as specified and directed
Material and labour for precast cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in manhole covers, chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces including necessary formwork, complete all as specified and directed.
Material and labour for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; flat rough finished concrete surfaces, not exceeding 200 mm thick (Horizontal or sloping) complete all as specified and directed.
Taking down cement plaster on brick or stone walls or concrete surfaces of waal/ceiling etc, any description including raking out joints, hacking for key, scrubbing down with water, etc and removal of rubbish outside MoD land, complete all as specified and directed. Note : Rate quoted by contractor shall be deemed to include to necessary scaffolding etc.
Demolition of brick masonry work built in cement mortar including all quoins, arches, pillars, staging etc. and removal of rubbish outside MOD land, complete all as specified and directed.
Material and labour for brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and directed
Material and labour for brickwork with using retrieved subclass 'B' old size bricks, straight or curved on plan exc 6 m mean radius, built in cement mortar (1:6), except bricks, complete all as specified and directed. Note : Old serviceable bricks retrieved from demolition vide srl item No 1.86 here-in-before shall be reused after proper cleaning & washing etc.
Material and labour for brickwork in half brick thick wall using sub class 'B' old size bricks, straight or curved on plan exc 6 m mean radius, built in cement mortar (1:4), complete all as specified and directed. Note : Old serviceable bricks retrieved from demolition vide srl item No 1.86 here-in-before shall be reused after proper cleaning & washing etc.
Material and labour for rendering 15 mm thick in cement mortar (1:4), on brick/concrete surfaces of walls, finished even and fair , complete all as specified and directed. Note :- Note: The rate quoted by contractor shall be deemed to include cost of necessary scaffolding as required upto 10.00 Mtr high building.
Material and labour for rendering 15 mm thick in cement mortar (1:6), on brick/concrete surfaces of walls, finished even and smooth without using extra cement, complete all as specified and directed.
Material and labour for rendering 10 mm thick in cement mortar (1:3), as on concrete surfaces (such as chajjas, balcony,mumty and staircase flight ceiling etc.) finished even and smooth without using extra cement, complete all as specified and directed. Note: The rate quoted by contractor shall be deemed to include cost of necessary scaffolding as required upto 12.00 Mtr high building.
Material and labour for preparation of newly plastered surfaces of walls and applying two coats of 1st quality oil bound distemper (oil emulsion) over and including a coat of primer and 1mm thick wall care putty for smoothening the surface by using sand paper, complete all as specified and directed.
Material and labour for preparation of newly plastered or un plastered ceiling surfaces of any description and applying three coats of white wash complete all as specified and directed.
Material and labour for preparation of newly plastered surfaces of wall and applying two coats of cement base paint complete all as specified and directed.
Complete removal of existing treatment and Material & Labour for applying Two coats of cement base paint,complete all as specified and directed.
Material and labour for complete removal of existing treatment from internal surfaces of walls by wire brushes and using sand paper and stopping of surfaces & leveling /edging the disturbed places /edges using necessary filling compound and applying 1mm thick Birla/JK wall care putty to obtain smooth regular/even finish, including a coat of primer and applying two coats of oil bound distemper, complete all as specified and directed
Material and labour for complete removal of existing treatment from internal surfaces of ceiling by wire brushes and using sand paper and stopping of surfaces & leveling /edging the disturbed places /edges using necessary filling compound and applying 1mm thick Birla/JK wall care putty to obtain smooth regular/even finish, including a coat of primer and applying two coats of oil bound distemper, complete all as specified and directed
Material and labour for Preparation of old painted wooden surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
Material and labour for preparation of old painted steel surfaces of any description not otherwise described over 10 cm width or grith and applying one coat of synthetic enamel paint complete all as specified and directed.
Note For Srl Item No. 1.93 to 2.00 :- The rates quoted against these items shall be deemed to include the cost for use of scafolding, ladders, cradles etc, removing nails, making good holes, cracks etc, removing furnitures, cub boards, washing floors and wall tiles,cleaning glasses, joinery, electric fittings, wiring, conduits etc of drops, splashes and leaving premises clean and tidy upto the entire satisfaction of GE.
(A) Supply and fixing pre fabricated/factory made modular kitchen units below main kitchen platform, Approximate area 42 sqft (elevated area ) and each unit having approx 700 mm height (Exclusive of 105 mm height of PVC adjustable legs) and 610 mm depth as per the following specifications:- The frame work or cases of the cabinets including drawer fascia/sides/bottom, shelves etc shall be made out of 19 mm thick marine plywood (of make like Green ply/Centuryply, Kit ply or equivalent as approved, of boiling water proof grade and moisture resistant), inside with 0.6 mm thick lamination (plain white) and 1mm thick laminated glossy finish over external faces. Panel shutter shall be made out of 19 mm thick HDF with using 1.0 mm decorative laminated glossy finish of make like Spacewood/INOPAN/PARACASA or eqivalent of boiling water proof grade and moisture resistant . Each shutter shall be fixed to the frame work using two numbers of soft closing auto hinges of make Helttich, KAFF or equivalent as approved and Handle of G profile for all drawers doors of reputed approved make .For each drawer the fascia shall be made out of 19 mm thick HDF (with 10 years warranty) of make like Spacewood / INOPAN PARACASA or eqivalent (of boiling water proof grade and moisture resistant ), laminated on both sides and baskets of stailness steel 304 grade with all accessaories ( sample of bskets to be approved by GE) . It shall be mounted on approved quality high precision soft close telescopic chanels ( 1 sets per drawer) of make Kaff, Hittachi, Hafle or equvalent as approved, of 45 kg capacity to be designed as per drawer size and to meet the weight requirement with minimum length of 20 inch to ensure smooth movements of drawers with/without content weights. In each kitchen, there shall be following units with fittings/fixturs as directed by engr -in - charge: (a) 600 mm plain shelf unit (b) 1000 mm hinged unit below sink (c) 900 mm plain shelf unit (d) 600 mm grocery unit (e ) 600 mm gas cylinder unit (f) 600 mm Coocking cutlery unit (g) 800 mm plain shell unit (h) 1 Nos detergent holder (j) 1 Nos Dustbin holder (k) Filler 30 mm.
(B) Supplying and fixing Pre- fabricated factory made overhead kitchen wall units above main kitchen platform having box type overhead units with approx length of 2400 mm (in two parts), 700 mm height and 325 mm depth as per following specifcation:- The frame work or cases of the cabinets including drawer fascia/sides/bottom, shelves etc shall be made out of 19 mm thick marine plywood (of make like Green ply/Centuryply, Kit ply or equivalent as approved of boiling water proof grade and moisture resistant) inside with 0.6 mm thick lamination (plain white) and 1.0 mm laminated glossy finish panel door (Approx 18 sqft per kitchen) shall be made out of 19 mm thick HDF with glossy finish (with 10 years warranty) of make like Spacewood / INOPAN PARACASA or eqivalent of boiling water proof grade and moisture resistant. Panel door shall also have provision of fixing of 600 mm thick transparent glass. Each shutter shall be fixed to the frame work using two numbers of soft closing auto hinges of make Helttich, KAFF or equivalent as approved and Handle of G profile (Approx 7 feet per kitchen) of reputed approved make. In each kitchen, there shall be following units with fittings/fixturs as directed by engr -in - charge: (a) 02 Nos of 1200 mm plain shelf unit ( 01 No self to be provided in two parts 01 each for fittings for plate rack and cup and saucer including provision of water containing plate below rack to remove water.
Taking down chowkhats or frames with shutters (without taking off shutters from the frame), not exceeding 1.5 Sqm each and removal, including making good the disturbed surface in CM(1:4) and finishing as per existing specifications and removal of debris outside MOD land, complete all as specified and directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frame), exceeding 1.5 sqm but not exceeding 4 sqm each and removal, including making good the disturbed surface in CM(1:4) and finishing as per existing specifications and removal of debris outside MOD land, complete all as specified and directed.
Taking down shutters of any description not exceeding 1.0 Sqm each, from chowkhats/frames and removal to store for reuse or credit, complete all specified and directed
Taking down shutters of any description exceeding 1.0 Sqm but not exceeding 2.0 Sqm each, from chowkhats/frames and removal to store for reuse or credit, complete all specified and directed
Taking down shutters of any description not exceeding 2.0 Sqm each, from chowkhats/frames and removal to store for reuse or credit, complete all specified and directed
Supply and fixing factory made pressed steel frames for doors with two rebates, of size 125 mm x 60 mm, made out of 1.25 mm thick sheet, including PCC 1:3:6 type C-0 filling, one shop coat primer and necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed.
Supply and fixing factory made pressed steel frames for doors with two rebates, of size 105 mm x 60 mm, made out of 1.25 mm thick sheet, including PCC 1:3:6 type C-0 filling, one shop coat primer and necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed.
Material and labour for mild steel as in framed work of doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing similar work conforming to Fe 410 -W (GdeE- 250) quality A, complete all as specified and directed.
Supply and fixing flush shutters 35 mm thick, solid core construction with block board core and plywood face panels commercial type on both sides, both faces covered with decorative face veneer, duly provided with 6mm thick Teakwood lipping on edges, fitted to chowkats, complete all as specified & directed.
Supply and fixing second class hard wood 35 mm thick plain, glazed and skelton factory made shutters, open rebated and prepared to receive glass, gauge etc (without shash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutter as specified in SSR Part I, Section 8, Clause 8.24(a), kiln seasoned and chemically pressure treated , supplied and fitted to chowkats complete all as specified and and directed. Note:- Glass or Wire cloth in panels will be measured and paid separately.
Supply and fixing flush shutters 25 mm thick, solid core construction with block board core and plywood face panels commercial type on both sides, both faces covered with decorative face veneer, duly provided with 6mm thick Teakwood lipping on edges, fitted to chowkats, complete all as specified & directed.
Supply and fixing Solid PVC Door Frame of size 50 mm x 47 mm made out of 5 mm thick single side prelaminated PVC sheet reinforced with M.S. Square tube and edges shall be painted to match with prelaminated sheet, as per specification & drawing in SSR Part-II, in opening, complete all as specified and directed.
Supply and fixing factory made solid PVC moulded door shutter, 28 to 30 mm thick (stiles), with 2, 4, or 6 raised panel design with 2 mm thick moulded prelaminated PVC sheet on the front face & 2 mm prelaminated PVC sheet on back face, complete all as per manufacturer instructions, complete all as specified and directed.
Supply and fixing butt hinges, 100mm long, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21, ISI marked, complete all as specified and directed.
Supply and fixing 150 mm long aluminium anodized, barrel tower bolt of extruded section, ISI marked, complete all as specified and directed.
Supply and fixing, 150 mm long, extruded aluminium alloy handles, fabricated type, anodized, complete all as specified and directed.
Supply and fixing Aluminium alloy, anodised, sliding door bolts 300 mm long, with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy 12mm dia, complete all as specified and directed.
Supply and Fixing mild steel 300 mm long, ordinary rat tail rod pattern spring including roller and roller plate, complete all specified and directed.
Supply and fixing Factory made box type steel window with pintol hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded, including provision of grill as per drawing and with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEAF/STD-184-2012 Sheets 1/3, 2/3 & 3/3.
Supply and fixing factory made box type steel secion ventilators, fixed type with glazing bars and with one shop coat of zinc cromate primer complete all as specified and and directed.
Supply and fixing for factory made Steel ventilators with centre hung shutter including two pairs of brass cup pivots, catch spring and pulley wheel, complete all as specified and directed.
Supply and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, complete all as specified and directed.
Supply and fixing Powder coated (thickness of powder coating not less than 50 micron) Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 Kg/m, with minimum thickness of powder coating 50 micron, including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (1 No.), hinges type B-21, 100mm long (2 Nos), suitable handle (2 Nos.) complete shall as specified and directed.
Supply and fixing stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed to steel frames with stainless steel tacks, or stainless steel wire staples, or fixed to wooden frames with first class hard wood bead, complete all as specified and directed.
Supply and fixing of 3 mm thick Sheet glass ordinary quality and glazing with oil putty or bead in squares exceeding 0.5 Sq. m in each pane, complete all as specified and directed.
Supply and fixing of 4.8 mm thick Sheet glass figured glass, pin headed type ordinary quality and glazing with oil putty or bead in squares exceeding 0.5 Sq. m in each pane, complete all as specified and directed.
Supply and fixing in repairs curtain rails, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed.
Taking down shutters of any description exceeding 1.0 Sqm but not exceeding 2.0 Sqm each, from chowkhats/frames and refixing in the same opening after necessary repair, easing and adusting, jointing replacement/refixing of mongries etc, complete all as specified and directed.
Taking down shutters of any description not exceeding 1.0 Sqm each, from chowkhats/frames and refixing in the same opening after necessary repair, easing and adusting, jointing replacement/refixing of mongries etc, complete all as specified and directed.
Demolition of cement concrete ( unreinforced) in ground floors and pavings n. exe 15 cm thickness (below or above ground level ) including removal of debries out of defence land complete all as specified and directed
Material and labour for 50 mm thick Plain cement concrete (1:3:6), Type C-2, using 40 mm graded stone aggregate as in plinth protection, finished the surface even and fair, complete all as specified.
Material and labour for 75 mm thick plain cement concrete 1:4:8 type D-2 using 40 mm graded crushed stone aggregate as in sub base of floors, complete all as specified and directed.
Material and labour for coloured chequered cement concrete tiles 300 mmx300 mmx25 mm thick, factory made, ISI marked (IS 13801-1993), with grey cement & pigment, laid with neat cement slurry @ 3Kg/Sqm over & including 20 mm thick screed bed in cement mortar (1:6), pointed in white cement with matching colour pigment, complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.
Dismantling structural steel work including doors, gates but excluding framed truss etc., complete all as specified and as directed.
Supply and fixing Joist, channel, angle, or tee sections, Fe 410 -W (Gde E- 250) quality-A, connected each other by welding for making chajja framework and fixed to wall at any height (as per site requirment), without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) complete all as specified and directed.
Supply and Fixing Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick, of any colour (as approved by GE), having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.
Material and labour for cutting groove in brick wall, 75 mm wide and 65 mm deep, and shaping horizontal face of groove with cement mortar (1:3) mixed with water proofing compound, complete all as specified and directed
Material and Labour for PCC (1:2:4) type B-1, using 20mm graded crushed stone aggregates, as in bed block of hold fast, coping, including weathering, slightly rounded or chamfered angle and throating, including necessary form work, complete all as specified and directed.
Taking down steel rolling shutters of area not exceeding 15 Sqm, height not exceeding 3.5 metre, carrying out neccessary minor repair of various parts including bearing, shaft etc and greasing and refixing in the same opening, complete all as specified and directed.
Material and Labour for 1.00 mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc as required, complete all as specified and directed
Supply and fixing18mm/19mm thick prelaminated particle board, interior grade, prelaminated both sides with decorative choice lamination and fixed with screws to timber frame as in cupboards, shutters, shelves, pelmet etc, including fixing 18 mm wide 6 mm thick beading of 1st class HW (Teak) all around, fixed as in repairs, including removal of old to store for reuse or credit, complete all as specified and directed.
Material & labour for RCC (1:1.5:3) type A-1, using 20 mm graded stone aggregate, as in chajjas, fins, louvers, roof projections, beam and lintel after removing loose concrete and preparation of surfaces by application of de-rusting chemical such as Dr fixit rust remover or equivalent and welding additional main bars/ distribution bars if found necessary by inserting to adequate depth in beam by drilling, pinning reinforcement old bars/new with and including a coat of anti corrossion Nitozinic primer of M/S FOSROC @ 200ml per Sqm including necessary scafolding and form work as required upto First floor, complete all as specified and directed. Note:- 1. Rates shall be deemed to include the cost for necessary scafolding etc. 2. Reinforcement will measured and paid separately.
Material and Labour for TMT steel bars, 8 mm dia and over , cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and as directed.
Supply only integral water proofing compound, complete all as specified and directed.
INTERNAL ELECTRIFICATION WORK
Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including GI earth wire on batten or in PVC conduit or in MS Conduit including fixtures and fittings such as switches, ceiling roses, pendants, fan regulators, sockets etc, removing materials to store for keeping in safe custody for reuse or for credit (credit for above items shall be made as per conditions separately) and making good disturbed surface of walls, floors, etc., complete all as specified and directed.
Material and labour for point wiring with single core multi stranded copper conductor 1.5 Sqmm (nominal area) PVC insulated unsheathed FRLS colour code cable of 1100volts grade drawn through and including non metalic rigid PVC conduit medium duty of suitable size with all standard fittings such as Tee junction, bends etc, concealed in wall/fixed on ceiling including including modular cover plate and boxes for housing switches, fan regulators etc, including 1.5 Sqmm (nominal area) multi stranded copper conductor PVC insulated unsheathed FRLS colour code cable of 1100 volts grade for earth continuity, as for one light/exhaust fan/bell point or fan point (through regulator), controlled by one switch, complete all as specified and directed. Note(s) : (i) Rate quoted shall be deemed to include cutting chases for concealing conduit and making good in cement mortar (1:4) or PCC (1:2:4) as required. (ii). Switches and fan regulator etc., shall be measured and paid separately.
All as per item No.3.02 here-in-before but light point wiring controlled by two way switch complete all as specified.
All as per item No.3.02 here-in-before but point wiring for one 6 Amps socket outlet point on independent board controlled by one single pole, one way switch complete all as specified.
All as per item No 3.02 here-in-before but for 2/3 pin socket outlet 6 Amps on same board with other switches.
All as per item No. 3.02 here-in-before but point wiring using 2.5 sqmm as main wire & 1.5 Sqmm as continous earth wire, for one 15 Amps socket outlet point on independent board controlled by one single pole, one way switch complete all as specified.
Supply and fixing switch modular type, single pole, one module, 6 Amps, 230volts, complete all as specified and directed.
Supply and fixing switch modular type, single pole, one module, 6 Amps, 230volts, complete all as specified and directed.
Supply and fixing socket outlet, modular type, multi purpose, 2/3 pin, 6 Amps, two module, 230 volts, complete all as specified and directed.
Supply and fixing socket outlet, modular type, multi purpose, 2/3 pin, 6Amps and 16Amps, two module, 230volts, complete all as specified and directed.
Supply and fixing modular type fan regulator, step type (4/5 steps),120 W, two module, suitable for 1200/1400 mm sweep ceiling fans including necessary connections, complete all as specified and directed.
Supply and fixing bell push, 6A, 230 volt, single pole, complete all as specified.
Supply and fixing switch modular type, one module, two way, 10 Amps, 230 volts, complete all as specified and directed.
Supply and fixing ceiling rose, surface bakelite, polycarbonate / PVC isolated body, 65mmx50mm, two to three terminals, (ISI marked), complete all as specified and directed.
Supply and fixing LED lights fitting 1x 20 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose including taking down old light fittings, complete all as specified and as directed.
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and as directed.
Supply and fixing LED light fitting 1x9W/1X10W bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and as directed.
Supply and fixing in replacement MCBs Distribution board sheet metal enclosures, SPN 240 Volts, 12 ways with 200 amps rated bus bar, double door, with IP 54 protection, complete all as specified and directed.
Supply and fixing in replacement MCBs Distribution board sheet metal enclosures, TPN 240 Volts, 4 ways 415 V with 200 amps rated bus bar, double door, with IP 54 protection, complete all as specified and directed.
Supply and fixing in repair Sheet metal enclosure single pole and neutral with a two pin socket and earth plug complete with one MCB single pole and 240V, 20 Amp ‘B’ curve, 10 KA, complete all as specified and directed.
Supply and fixing in repairs MCB 63 Amp, 415 Volt, TP, breaking capacity 10 KA, 'B' curve, complete all as specified and directed.
Supply and fixing in repairs MCB 32/ 40 Amp, 230 Volt, SPN, breaking capacity 10 KA, 'B' curve, complete all as specified and directed.
Supply and fixing in repairs MCB 6 to 32/ 40 Amp, 230 Volt, SPN, breaking capacity 10 KA, 'B' curve, complete all as specified and directed.
Material and Labour for painting ceiling fans after taking down, with synthetic enamel paint by spraying, including filling cavities with fillter after cleaning all dust etc and refixing the same in position after painting, complete all as specified and directed.
Supply and fixing exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers, complete all as specified and directed.
Supply and fixing exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding, of sweep 250 mm, complete all as specified and directed. Note: Cutting hole and making suitable opening in wall for fixing exhaust fan including making good to match the existing surfaces shall be deemed included in the quoted rate of item.
Material and labour for Sub Main Wiring (in replacement) with two single core 10 Sqmm (nominal area) multi stranded copper conductor FRLS PVC insulated and unsheathed colour code cables, drawn in and including non-metalic rigid PVC conduit, heavy duty of 25 mm dia, including standard fittings such as Tees, junction, bands etc., conduit concealed in wall & fixed on ceiling with suitable clamps, with and including one run of continuous multi stranded copper conductor 10 Sqmm (nominal area) FRLS PVC insulated and unsheathed colour code cable for earth continuity, 1100 volts grade , complete all as specified and directed. Note: Two runs of 10 Sqmm main cable + one run of 10 Sqmm cable for earth continuity and PVC conduit shall be measured as one unit/one Running Metre.
Material and labour for Sub Main Wiring (in replacement) with two single core 6 Sqmm (nominal area) multi stranded copper conductor FRLS PVC insulated and unsheathed colour code cables, drawn in and including non-metalic rigid PVC conduit, heavy duty of 25 mm dia, including standard fittings such as Tees, junction, bands etc., conduit concealed in wall & fixed on ceiling with suitable clamps, with and including one run of continuous multi stranded copper conductor 6 Sqmm (nominal area) FRLS PVC insulated and unsheathed colour code cable for earth continuity, 1100 volts grade , complete all as specified and directed. Note: Two runs of 6 Sqmm main cable + one run of 6 Sqmm cable for earth continuity and PVC conduit shall be measured as one unit/one Running Metre.
Material and labour for Sub Main Wiring (in replacement) with two single core 4 Sqmm (nominal area) multi stranded copper conductor FRLS PVC insulated and unsheathed colour code cables, drawn in and including non-metalic rigid PVC conduit, heavy duty of 25 mm dia, including standard fittings such as Tees, junction, bands etc., conduit concealed in wall & fixed on ceiling with suitable clamps, with and including one run of continuous multi stranded copper conductor40 Sqmm (nominal area) FRLS PVC insulated and unsheathed colour code cable for earth continuity, 1100 volts grade , complete all as specified and directed. Note: Two runs of 4 Sqmm main cable + one run of 4 Sqmm cable for earth continuity and PVC conduit shall be measured as one unit/one Running Metre.
Supply and fixing in repair LED street light fitting 25 Watt 230 V AC 50 Hz powder coated outdoor type with high pressure die cast aluminum housing and heat resistant toughened glass, with IP 66 protection, complete as specified and as directed.
Material and labour ( in replacement) for earthing complete with GI earth plate electrode of size 600mm x 600mm x 6mm thick burried directly in ground vertically (depth of pit not less than 2.25 m below normal ground level), with top edge of earth plate not less than 1.5m below normal ground level, earth plate surrounded from all sides by 15cm thick packed alternate layers of charcoal dust and common salt, electrode connections using galvanized iron wire 4mm dia (upto body of equipment) by means of nuts, bolts, check nuts & GI washers, connected to main switch board or main control board or test point, protected by galvanized iron pipe light grade 40mm dia bore, and watering pipe 20mm dia bore GI medium grade with funnel & wire mesh including all necessary excavation & earth work, PCC chamber in PCC (1:2:4) type B-1 & RCC cover, all as shown in electrical plate No 3 of MES Schedule Part-I (2009), testing on completion, complete all as specified and directed. Note(s) :- (i) RCC pit cover shall be pre-cast of RCC (1:2:4) type B-1, 80mm thick reinforced with XPM not less than 4Kg/Sqm. (ii) PCC chamber shall be constructed 500 mm away from the edge of earth pit. (iii) Rate shall include GI strip and protection pipe of length 7.5m. (iv) Earth resistance should be less than 3Ohm. In case the test results are not found below 3Ohm, complete earthing will be redone without any extra cost to Govt.
Supply and fixing in repair 20 mm Rigid non-metallic PVC conduit exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc., complete all as specified and directed.
Note: The Total amount shall subject to adjustment of credit of Rs. 79667.00 for old Materials as per Schedule of Credit.
shree balaji builders
R K Enterprises
dhiraaj construction company
Anil Kumar Gupta
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .