Special Repair of Expansion of KDB Office Building (Block-A, B and C) for Kurukshetra Development Board at Brahamsarovar in District Kurukshetra (Pdg. Internal EI Work only) (Recall).

Amount

1: - ( c ) Moulded case Circuit breakers. Supply and erection of moulded case circuit breakers on wall or on existing pedestal including bonding to earth and necessary connections. 15 amp.to 60 amp. 415 V ,10 KA 3-phase. 31.12 c (i)

2: - Supply and erection of M.S. angle iron frame duly welded for housing M.S. sheet & main switches etc. on it, fixed on wall by means of suiteble size of rag bolts with cement concrete ,duly painted with three coats of approved paint including one coat of red oxide. Size 40 mm x 40 mm x 6 mm. 31.13(ii)

3: - M.S.Sheet . Supply and erection of 3 mm thick mild steel sheet duly welded on existing M.S. angle iron frame for fixing the main switches etc. as required, duly painted with three coats of approved paint including one coat of red oxide. 31.14 ( i )

4: - (K) Distrubution board with plug and socket. Supply and erection of sheet steel enclosure 2 pole / 3 pole with earth plug and socket suitable for incorporating single pole / triple pole MCB on wall / on existing pedestal complete with necessary connections etc. S.P.N. enclosure for single pole MCB 20 amp. 31.15 (ii)

5: - (L) Miniature Circuit Breaker and Isolator. Supply and erection of miniature circuit breaker / isolator 240 /415 V in the existing distribution board including making necessary connections. SP MCB of 9 KA breaking capacity 6 amp. to 32 amp. 31.17a) (ii)

: - SPN MCB of 9 KA breaking capacity 6 amp. To 32 amp. 31.17(a) (ii)

: - TPN MCB of 9 KA breaking capacity 40 amp. to 63 amp. 31.17(a) (iii)

6: - (M) Supply and erection of Fittings and Accessories. Call bell 220 / 230 volts A.C. bakelite with double coil. 31.18 (vii)

: - Bell push with 4 metres 2-core , 0.50 sqmm (16 / 0.20 mm).PVC flexible wire. 31.18 (ix) (a)

: - Bakelite angle / straight button holder large size. 31.18 (xi)

: - Erection only of 1x40 watts or 2x40 watts 1220 mm long / 1x20 watts or 2x20 watts ,610 mm long fluorescent tube fitting directly on wall including necessary connections with 0.75 sqmm ( 24 / 0.20 mm ) PVC copper flexible cable for connecting the tube with the adjecent point. 31.18 (xxiv)

7: - Erection and carriage of fans.. Erection of ceiling fan complete with necessary earthing of fan and regulator including carriage from local railway station /goods transport /PWD store to the site of work. 31.20 (i)

8: - (P) Pipe Laying. Supply and erection of pipe for wiring purposes including bends inspection boxes etc. where necessary and painting as required. Heavy guage welded conduit pipe 20 mm dia 1.60 mm thickness flushed. 31.21 (xxi)

: - Heavy guage welded conduit pipe 25 mm dia 1.60 mm thickness flushed. 31.21 (xxii)

9: - Supply and erection of PVC pipe of 6 kg. pressure laid 1 metre below ground level complete including digg ing refilling of the trench with jointing etc. PVC pipe 80 mm dia. 31.21(xxx) (b)

10: - (Q) Earthing Earthing with GI earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required. 31.22(iii)

: - Extra for charcoal or coke and salt for G.I. Plate or copper plate earth electrode. 31.22(v)

: - Pdg. and fixing 25 mm x 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode as required . 31.22(xi)

: - Pdg. and fixing 25 mm x 5 mm copper strip on surface or in recess for connections etc. as required with all labour and material. 31.22(xiv)

11: - Supply and erection of under ground cable ,loose in existing pipe or trenches complete with necessary connections . 70 Sq. mm 3.5 Core Cable . 31.26 (xxviii) Ard.

12: - Supply and erection of suitable compression type brass cable glands for underground Cable. 70 Sqmm to 95 Sqmm Cable 3 to 3.5 Core . 31.28(iv)

13: - (U) Bus Bar chamber (a) Copper . Supply and erection of metal clad bus bar chamber made from 1.6 mm thick M.S.sheet fixed with rag bolts on wall or on existing pedestal / angle iron frame including bonding to earth , detatchable top and bottom painting and necessary connections etc.(Copper bars duly tinned ). 200 amp. 4 bars of 100 cm each (cross section 25 mm x 5 mm) chamber over all size 1.10 m x 45 cm x 18 cm . 31.31 (a) (v)

14: - Wiring only in 1.5 sq.mm PVC Insulated copper conductor cable in existing conduit pipe and MS boxes covered with 5mm thick balelite sheet including cost of switches, wall socket, ceiling rose etc. Fan Point- Medium. 31.38 (i) b

: - Fan Point- Long 31.38 (i) c

: - Light Point- Short. 31.38 (ii) a

: - Light Point- Medium 31.38 (ii) b

: - Light Point- Long 31.38 (ii) c

: - Call bell point including M.S. box of size 180 mmx100 mmx60 mm deep for call bell- Long point. 31.38 (vi) c

: - 3 pin 5 amp. plug point including earthing the 3rd. pin etc.- Short point. 31.38 (vii) a

: - 3 pin 5 amp. plug point including earthing the 3rd. pin etc.- Long point. 31.38 (vii) c

: - 3 pin 15 amp plug point including earthing the 3 rd. pin etc.with 4 sq mm PVC insulated Al. Conductor cable- Long point. 31.38 (viii) c

15: - Supply and erection of PVC unsheathed copper conductor cable single core 1100 volts grade in pipe of suitable size excluding cost and erection of pipe. Size 1.5 sqmm (3 / 0.81mm). 31.40 (i)

: - Size 2.50 sqmm (3 / 1.05mm). 31.40 (ii)

: - Size 4 sqmm (7 / 0.85mm). 31.40 (iii)

: - Size 10 sqmm ( 7 / 1.35mm). 31.40 (v)

: - Size 16 sqmm (7 / 1.70mm) 31.40 (vi)

16: - Supply and erection of double door sheet steel enclosures distribution boards suitable for MCBs and ELCBs etc. recessed in wall including bonding to earth with all labour and material requared complete the job in all respect upto the entire satisfaction of the Engineer-in Charge of the work. 4-way, SP & N (Horizontal) 31.41 (i)

: - 4-way, TP & N (Horizontal) (8+12) 31.41 (iv)

: - 8-way, TP & N (Horizontal) (8+24) 31.41 (v)

17: - Supply and erection of PVC conduit pipe ISI marked (Medium) recessed in wall / ceiling etc. including cost of PVC bends, inspection box and all other material required to complete the job in all respect to the entire satisfaction of Engineer-in-Charge of work. 25 mm dia 31.44(b)

18: - Supply and erection of MS sadles and clamps on wall / RCC parapit for fixing underground cable at distance of 0.60 metre centre to centre fixed by means of rawl plug including the cost of all labour and material required to complete the job in all respect. 31.48

19: - Supply and erection of Socket size rotary step type electronic regulator for A.C. ceiling fan Anchor make Deluxe model No.50440 ISI/SSK make PC 561 operated on 120/280 V A.C. supply complete including cutting of existing bakelite sheet and making necessary connection etc up to the entire satisfaction of Engineer-in-Charge of work. 31.55

20: - Supply and erection of PVC pipe ISI marked ( Medium ) recessed in wall / ceiling etc. including the cost of PVC bends inspection boxes , iron hooks, cement concrete etc. complete in all respect up to the entire satisfaction of engineer in charge of work. PVC pipe of 32 mm dia 31.58 ( i )

21: - Supply & Erection of MS box of size 8”×10”×4” (20cm×25cm) and 10cm deep made one of 1.6mm thick MS covered with 5mm thick bakelite sheet for fixing of 4no. socket and switch of 6amp. And one no. sock-et and switch Of 15 amp. Including fixing of one no. fuse unit and indicator of approved make. The MS box is recessed in wall including cost of necessary cement sand & mixture required to complete the job in all respect with cost of necessary labour charges for fixing the bakelite sheet and complete then job in all respect up to the entire Satisfaction of Engineer-in-charge of work. NS- 1

22: - Supply & erection of enclosure for MCCB 32/63 Amp. Complete with labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-in-charge of work. Make: Havell’s, Standard, Indo Asian. NS- 2