Maintenance Work of Town Employment Exchange Thodupuzha

Amount

15.57 Dismantling aluminium / Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 metres lead as directed by Engineer - in-Charge

od329869/2023_2024 Providing and fixing 9mm thick marine plywood conforming to IS 710,to frame, backing or studding with screws etc. complete ( Frames, backing or studding to be paid separately): 16mm thick

od329887/2023_2024 Providing and fixing 16mm marine ply wood conforming to IS 710, to frame backing nor studding with screws etc complete ( frames, backing or studding to be paid separately ) 16mm thick (Modified item 9.17.1)

od330031/2023_2024 Providing and fixing edge band 17mm for cupboard / table side

od329956/2023_2024 Providing and fixing 12 mm thick frameless toughened glass fixed of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge)

od329957/2023_2024 9.115 Providing and fixing stainless steel telescopic drawer channels 500 mm long with necessary screws etc complete as per directions of engineer-in charge

od329958/2023_2024 Providing and fixing cupboard lock with necessary screws etc, complete as per directions of Engineer- in charge (9.115)modified

od329959/2023_2024 Providing and fixing decorative veneered OXT sheet of plain / wood grain in gloss / matt / suede finish and reverse side of adhesive bonding quality conforming to IS :2046 Types S , including cost of adhesive of approved ( modified 9.127.2)

21.1.1.2 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)

21.2.2 Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sides

21.3.1 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0mm thickness

13.111.2 Finishing walls with Acrylic Smooth exterior paint of required shade :Old work (One or more coat applied @ 0.90 ltr/10 sqm).

od330633/2023_2024 Providing and fixing horizontal Blinds for window curtain using with all fittings as per the direction of Engineer in charge etc complte

17.7.1 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps

Joseph Varkey (BID ID -2168625)