Wd no.14 Pashurampur me sudama ramsilai kendra se sishkant pushpanjali hote hua interloking and nali karya

Excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts.D6

Earth in cutting for embankment in ordinary soil excavation to done from of regular pits not exceeding 1/2 m , in depth and work embankment to be in 20 cm .layers including ramming and dressing the surface to required levels and slopes and also including 1.5 M .lift and 30 M .lead the from cutting to be used in making embankment or to be deposited as spoil banks with in 30 m distance as directed by the engg. in charge. S.O.R.253

Providing and laying cement concrete 1:6:12 (1 cement: 6 fine sand : 12 graded brick aggregate 40 mm. Nominal size) including supply of all materials, labour and T & P etc. required for propercompletion of the work and curring complete, also including cost of form work in foundation and floors. SOR-273

Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401.

upply of 80mm. Thick zig zag Shaped mechanicaly compressed interlocking cement concrete pavers block manufactured by high pressure and controlled vibration machine having minimum 5mm. Thick topping cp cement mixed 20% marble powder the compressive strength of concrete paver blocks shall not be less than 30MPa. & 4.5Kg./No. and ISI marked and as per drawing and confiming IRC-SP-63-2004 including cost of material, labour, T&P etc. required for proper completion of work as directed by E/I.

M-150 brick work in 1:4 cement and sand of 1.25 fineness modulous mortar in foundation and plinth including supply of all material, labour and tools and plants. ect. required for proper completion of work. SOR 305

12mm thick plaster with cement & fine sand of 1.25 F.M. mortar in 1:4 including supply of all materials labour and T&P etc. required for proper completion of work SI no-584

Cost of reinforced cement concrete in the propotion 1: 2:4 excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B. W.G.G.I. binding wire including the cost of binding wire, moulds and all other materials, labour and T & P etc. required for proper complection of the work. SOR 284

Supplying, fitting and placing HYSD bar reinforcement in sub-structure complete as per drawing and Technical Specifications

Providing and laying in cement concrete 4: 2 :1 of not less than strength of M 150 stone ballast (40 mm. Nominal size) Zapproved coarse sand : 1 cement including supply of all materials, labour and T & P etc. required for proper completion of the work and curing complete including cost of form work in foundation and floors

Supply and Sinage board at site all complete work at site

Add GST 18 %

Please Enable Macros to View BoQ information