Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance AKHNOOR SUNAIL JAMMU JAMMU KASHMIR 181201 UDYAM JK 07 0021444 | JAMMU | JAMMU AND KASHMIR | 181201 | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
Tender Value
₹6.9 L
EMD Value
₹13,828
Closing Date
27 May 2020, 11:00 amClosed
EE
Jal Shakti Division INdora
Constuction of delivery tank 1 No Construction of 13 Nos outlets laying jointing and testing of HDPE pipe of various dia in distribution system
2020_HPIPH_37040_1
IND-KNG-03-730
Open Tender
Civil Works
Item Rate
120 days
Indora
Please refer Tender documents.
6 documents required · 6 mandatory
₹250
Yes
EE Indora
₹13,828
Yes
9 Jun 2020
11 May 2020
27 May 2020
12 May 2020
27 May 2020
12 May 2020
Amount
Excavation in foundation trenches (for Pipes & Pits) upto all depths in all classification of earth work such as pick work, jumper work, saturated soil including bailing or pumping out water, blasting soft /hard rock or chieselling soft /hard rock where blasting is prohibited in all lifts including trimming & dressing of sides leveling of beds to correct grade including shoring/strutting planking, timbering & dewatering wherever required stacking the serviceable and unserviceable material / soil separately and after laying, jointing and testing of pipes, returning the unserviceable soil in trenches in 15cm ( Fifteen centimeter) layers including consolidating of such deposited layer by ramming and watering & then disposing of all surplus excavated soil/ unserviceable material as directed within all leads and lifts including restoration of un-metalled surface to its original condition and including cost of diversion for traffic, night signals, fixing caution boards, crossing over trenches for access to houses, fencing etc. complete in all respect with in all leads and lifts as per directions of Engineer-in-Charge.
Providing and laying cement concrete 1:4:8(1 Cement:4 Sand:8 graded stone aggregate 40mm.nominal size) and curing complete excluding the cost of form work in foundation and plinth. within all leads and lifts as per the directions and satisfactions of the Engineer-in-Charge.
Providing and laying cement concrete work 1 : 2 : 4 ( 1 cement : 2 sand: 4 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in:-
Foundations, footings bases of columns and the like mass concrete within all leads and lifts as per direction of Engineer-in-Charge.
In walls (any thickness) but not less than 0.10 Metre thickness including attached pillasters,buttresses,plinth and string courses etc.from top of foundation level upto any floor level within all leads and lifts as per the directions and satisfactions of the Engineer-in-Charge.
Providing form work with steel plates 3.15mm.thick welded with angle iron frame 30x30x5mm. so as to give a fair finish in-cluding centring,shuttering,strutting and propping etc.with wooden battens and ballies height of propping and centring below supporting floor to ceiling exceeding upto any height and removal of the same for in-situ-reinforced concrete and plain concrete work in:-
In vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters, buttresses plinth and string courses and the like including entire carriage of material within all leads and lifts as per the directions and satisfactions of the Engieer-in-Charge.
Providing and laying tor steel reinforcement for RCC.work including bending,binding and placing in position complete upto any floor within all leads and lifts as per the directions and satisfactions of the Engineer-in-Charge.
Laying & jointing in trenches 4.00 kg.F/ cm2 working pressure polythiene pipes high density conforming to IS:4984-1995 (PE - 80 grade) PN-4 complete with special flange compression type fittings. (Earth work in trenches to be measured & paid for separately) within all leads and lifts as per the directions and satisfactions of the Engieer-in-Charge.
125mm dia HDPE pipe
140mm dia HDPE pipe
160mm dia HDPE pipe
180mm dia HDPE pipe
200mm dia HDPE pipe
Providing and fixing of Cast Iron Alfa Valve of following nominal bore heavy duty reputed make of ISI-Marked as per per the directions and satisfactions of the Engineer-in-Charge.
140mm dia
180mm dia
200mm dia
DEEPAK SINGH
MASTAN ALI
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .