PROVIDING AND LAYING SEWERAGE NETWORK FOR TP ROADS AT TP-86 (Part-A) IN NEWLY ADDED AREA OF NEW EAST (SARTHANA) ZONE-B, SURAT MUNICIPAL CORPORATION.

NAME OF WORK: PROVIDING AND LAYING SEWERAGE NETWORK FOR TP ROADS

AT TP-86 (PART-A) IN NEW EAST (SARTHANA) ZONE-B, SURAT

MUNICIPAL CORPORATION.

Tender Notice (Online No: DMC/Drainage/11/2025-26 (Work No. 19)

VOLUME-II: PRICE BID

Last date of download of tender : 27/02/2026 to 25/03/2026

documents from website

smctender.nprocure.com

Pre-bid query : Bidders shall have to post their queries on e-mail

address [email protected] on or

before Date: 09/03/2026.

Last date of submission of online : Up to 25/03/2026, up to 18:00 hrs.

Last date of submission of tender : From 27/03/2026 to 09/04/2026 to Chief

fees, EMD and other documents in Accountant SMC, Muglisarai, Surat by

hard copy (as mentioned in R.P.A.C./Speed Post up to 17:00 hrs.

Tender Document)

Estimated Cost : Rs. 9,43,96,585.57 /-

Earnest Money Deposit (EMD) : Rs.

50% shall be in the form of crossed Demand Draft

of Nationalised Bank payable at Surat and

remaining 50% shall be in the form of Bank

Guarantee of Nationalised Bank (encashable at

Surat) or 100% EMD amount shall be in form of

crossed Demand Draft of Nationalised Bank

payable at Surat

Document Fees : Rs. 14,160.00 (Incl. CGST 9% and SGST 9%)

Opening of Tender (Online) : From 27/03/2026, 10.30 Hrs. onwards. If possible

Tender to be submitted to:

The Chief Accountant,

Surat Municipal Corporation,

Muglisarai, Surat – 395

1. NAME OF WORK

PROVIDING AND LAYING SEWERAGE NETWORK FOR TP ROADS AT TP-

86 (PART-A) IN NEW EAST (SARTHANA) ZONE-B, SURAT MUNICIPAL

1) ESTIMATED COST OF CAPITAL WORK: Rs. 9,43,96,585.57/- (Excluding

(Nine Crore Forty-Three lakh Ninety-Six Thousand Five Hundred Eighty-Five

Rupees and Fifty-Seven paisa only.)

TENDERER’S BID FOR EXECUTION OF CAPITAL WORK:

PERCENTAGE HIGHER / BELOW OF Rs. 9,43,96,585.57 /- (Excluding GST)

TENDER AMOUNT (IN FIGURES): Rs. __________________

TENDER AMOUNT (in WORDS): Rs. __________________

Rate Quoted by bidder shall be inclusive of all taxes but Excluding GST. GST shall

be paid extra as per prevailing rules.

SIGNATURE AND SEAL OF THE CONTRACTOR:

NAME AND ADDRESS:

SIGNATURE OF WITNESS:

NAME AND ADDRESS:

2. SCHEDULE – B

SR.No. ITEMS QTTY. PER

Excavation for pipe line trenches for

water supply, sewerage line,

machine hole etc. all with shoring

and struting if required as per

required gradient and line including

safety provisions using site rails and

stacking excavated stuff including

up to all required lead cleaning the

site etc. complete for all lifts and

strata as specified.

In hard murrum, boulders incl.

Excavation in bituminous road as

per required gradient and line

including safety provisions using

site rails and stacking excavated

stuff including up to all required

lead cleaning the site etc. complete

for all lifts as specified.

Excavation in Bituminous road 2451.00 288.65 C.M.

Excavation for pipe line trenches for

water supply, sewerage line,

machine hole etc. all with shoring

and struting if required as per

required gradient and line including

safety provisions using site rails and

stacking excavated stuff including

up to all required leadcleaning the

site etc. complete for all lifts and

strata as specified.

In C.C. Road 612.75 427.80 C.M.

Excavation for pipe line trenches for

water supply, sewerage line,

machine hole etc. all with shoring

and struting if required as per

required gradient and line including

safety provisions using site rails and

stacking excavated stuff including

up to all required lead cleaning the

site etc. complete for all lifts and

strata as specified.

In all sorts of soil and soft murrum

(A) Upto 1.5 Mt. dpt.from G.L. 79270.00 102.35 C.M.

SR.No. ITEMS QTTY. PER

(F) 7.50 Mt TO 9.00 Mt depth 10.00 162.15 C.M.

Providing cutting of existing

bituminous surface up to suitable

depth in line and alignment using

Mechnically operated cutter

machine before excavating existing 12705.00 51.00 RM

surface for utility laying including

cost of all type of machinery, fuel,

labour etc. and as per direction of

engineer incharge.

Supplying & Filling with fine sand

in compacted thickness over the

base including watering ramming,

consolidating & dressing etc.

complete. Item includes by using

vibratory plates compacted machine

and as directed by engineer in

Providing and supplying ISI

Standard R.C.C. pipes in standard

lengths of following class and

diameter suitable for rubber ring

joints including all taxes, insurance,

transportation,freight charges,

octroi, inspection charges, loading,

unloading, conveyance to

departmental stores, stacking etc.

One rubber ring should be supplied

with each full length socketed pipe,

cost included in rates below.

Lowering, laying and jointing of

following diameters in proper

position, grade and alignment at all

level as directed by Engineer-in-

charge including conveyance from

stores to site of work, labour, giving

hydraulic testing as per IS code.

(D1) 250 mm dia (NP3 Class) 3500.00 638.55 Rmt.

(D2) 250 mm dia (NP4 Class) 0.00 868.55 Rmt. -

(E1) 300 mm dia (NP3 Class) 4910.00 891.85 Rmt.

(E2) 300 mm dia (NP4 Class) 741.00 1223.85 Rmt.

SR.No. ITEMS QTTY. PER

(F1) 350 mm dia (NP3 Class) 258.00 1031.95 Rmt.

(F2) 350 mm dia (NP4 Class) 447.00 1531.95 Rmt.

(G1) 400 mm dia (NP3 Class) 66.00 1324.80 Rmt.

(G2) 400 mm dia (NP4 Class) 631.00 2047.80 Rmt.

(H1) 450 mm dia (NP3 Class) 0.00 1557.65 Rmt. -

(H2) 450 mm dia (NP4 Class) 155.00 2375.65 Rmt.

(I1) 500 mm dia (NP3 Class) 284.00 1702.35 Rmt.

(I2) 500 mm dia (NP4 Class) 557.00 2554.35 Rmt.

(J1) 600 mm dia (NP3 Class) 0.00 2208.20 Rmt. -

(J2) 600 mm dia (NP4 Class) 536.00 3256.20 Rmt.

(K1) 700 mm dia (NP3 Class) 0.00 3205.20 Rmt. -

(K2) 700 mm dia (NP4 Class) 547.00 4208.20 Rmt.

(L1) 800 mm dia (NP3 Class) 0.00 3522.30 Rmt. -

(L2) 800 mm dia (NP4 Class) 125.00 5922.30 Rmt.

(M1) 900 mm dia (NP3 Class) 0.00 3992.00 Rmt. -

(M2) 900 mm dia (NP4 Class) 131.00 7029.00 Rmt.

(N1) 1000 mm dia (NP3 Class) 0.00 5252.25 Rmt. -

(N2) 1000 mm dia (NP4 Class) 31.00 8713.25 Rmt.

(O1) 1100 mm dia (NP3 Class) 0.00 5533.35 Rmt. -

(O2) 1100 mm dia (NP4 Class) 0.00 9141.35 Rmt. -

(P1) 1200 mm dia (NP3 Class) 0.00 6405.00 Rmt. -

(P2) 1200 mm dia (NP4 Class) 0.00 10210.00 Rmt. -

(Q1) 1400 mm dia (NP3 Class) 0.00 8178.10 Rmt. -

(Q2) 1400 mm dia (NP4 Class) 258.00 14801.10 Rmt.

(R1) 1600 mm dia (NP3 Class) 0.00 11830.55 Rmt. -

SR.No. ITEMS QTTY. PER

(R2) 1600 mm dia (NP4 Class) 0.00 18365.55 Rmt. -

(S1) 1800 mm dia (NP3 Class) 0.00 14355.50 Rmt. -

(S2) 1800 mm dia (NP4 Class) 28.00 20002.50 Rmt.

(T1) 2000 mm dia (NP3 Class) 0.00 16880.45 Rmt. -

(T2) 2000 mm dia (NP4 Class) 0.00 21718.45 Rmt. -

(U1) 2200 mm dia (NP3 Class) 0.00 19405.40 Rmt. -

(U2) 2200 mm dia (NP4 Class) 0.00 23434.40 Rmt. -

Providing and constructing Sewer

machineholes, scraper

machineholes and unit house

connection chamber, as per the type

design in brickmasonry in C. M. 1:5

and inside and outside 20mm thick

plastering in C. M. 1:3 necessary

100 mm coping with reinforcement

in R.C.C.M.200 fixing C. I. steps

and fixing machinehole frame and

covers (But excluding supply of

machinehole frame and covers) over

machineholes and house connection

chambers and fixing machinehole

covers (but excluding supplying of

machinehole covers) over scraper

machinehole etc.

complete,providing and fixing

safety chain wherever necessary as

per the stipulations in the type

design complete as per latest

CPHEEO manual.(excl.

TYPE-A 1200 mm DIA

SR.No. ITEMS QTTY. PER

(Add or Deduct Rs.662.8 per

0.10 Mt.Depthincrease or

TYPE- B 1500 mm DIA

SR.No. ITEMS QTTY. PER

(Add or Deduct Rs.1231.3 per

0.10 Mt.Depthincrease or

TYPE-C 1500 mm DIA

SR.No. ITEMS QTTY. PER

(Add or Deduct Rs.1878.6 per

0.10 Mt.Depthincrease or

TYPE-D1 1500 mm DIA

SR.No. ITEMS QTTY. PER

10.00 mt. Depth

(Add or Deduct Rs.2211.00 per -

0.10 Mt.Depthincrease or

TYPE-D2 1500 mm DIA

SR.No. ITEMS QTTY. PER

SR.No. ITEMS QTTY. PER

10.00 mt. Depth

(Add or Deduct Rs.2212.10 per

0.10 Mt.Depthincrease or

TYPE-D3 1900 mm DIA

SR.No. ITEMS QTTY. PER

SR.No. ITEMS QTTY. PER

10.00 mt. Depth

(Add or Deduct Rs.2601.50 per

0.10 Mt.Depthincrease or

TYPE - S-1 (RECT.)

SR.No. ITEMS QTTY. PER

SR.No. ITEMS QTTY. PER

SR.No. ITEMS QTTY. PER

10.00 mt. Depth

10.10 mt. Depth

10.20 mt. Depth

10.30 mt. Depth

10.40 mt. Depth

10.50 mt. Depth

10.60 mt. Depth

10.70 mt. Depth

10.80 mt. Depth

10.90 mt. Depth

11.00. mt. Depth

11.10 mt. Depth

11.20 mt. Depth

11.30 mt. Depth

11.40 mt. Depth

11.50 mt. Depth

SR.No. ITEMS QTTY. PER

11.60 mt. Depth

11.70 mt. Depth

11.80 mt. Depth

11.90 mt. Depth

12.00 mt. Depth

12.10 mt. Depth

12.20 mt. Depth

12.30 mt. Depth

12.40 mt. Depth

12.50 mt. Depth

12.60 mt. Depth

12.70 mt. Depth

12.80 mt. Depth

12.90 mt. Depth

13.00 mt. Depth

13.10 mt. Depth

(Add or Deduct Rs.3190.70 per

0.10 M Depthincrease or

Providing and Fixing in position

R.C.C. ventilating column as per 33.00 16660.00 No.

Dewatering by pumping set of

required capacity including

temporary platform carting pumping

at site and fixing the same in

position including all accessories,

and fuel and labour etc. complete.

Pump set of Capacity 5000.00 18.32 HP/Hr

RCC precast M.H. Frame & Cover

Manufacture, supply & Delivery at

store or at site of work precast RCC

SR.No. ITEMS QTTY. PER

M.200 Frame & cover suitable to

drainage M.H. and as per type

design & Drawing including cost of

reinforcement M.S.Angles or Flat,

curing mold work etc.

(A) For Circular machinehole

(B) For Scraper machinehole. 0.00 7289.00 No. -

(C) For House Connection

Chamber light duty

Providing and filling Rubble

including hand packing and filling

interstices with quarry spalls behind 0.00 1064.80 C.M. -

abutment and between ruturns as

Shoring or timbering for trench with

50 mm thick planks and suitable size 38820.00 81.65 S.M.

struts etc. complete.

Refilling of pipeline trenches incl.

ramming, watering, consolidating

disposal of surplus stuff as directed

within a radius of 3 km.

Providing and constructing

rectangular brick masonry chamber

for house connection as per type

design in brick masonry in C. M. 1:3

including M-100 in foundation M-

150 in benching inside plastering in

C. M. 1:3 and outside plastering in

C. M. 1:3 coping in M200 and fixing

RCC precast machine hole frame

and covers, but Excl. supply of

machine hole and cover etc.

complete excl. excavation.

Making connection with the

machine hole by boring hole on the

masonary of machine hole and

jointing pipe with cement mortar in

prop. (1:2) inside as well as outside

of existing machine hole,curing

etc.complete as directed by

Engineer-in-charge.

Corrugated DWC HDPE pipes (non-

pressure pipes)-Providing and

supplying of Class SN8 Structured

Wall polyethelene Piping systems

SR.No. ITEMS QTTY. PER

(Pipe with online/offline coupler

and elastomeric sealing ring) with

non-smooth External Annular

Corrugated and Smooth Internal

Surfaces (Double Wall) for non-

pressure underground Sewerage &

Drainage application as per

EN:13476-3 including all local and

central taxes, transportation, freight

charges, octroi, inspection charges,

loading, unloading, conveyance to

the departmental stores etc.

complete.(ID Dia)

Providing and supplying in standard

length ISI mark rigid unplasticised

PVC pipes suitable for potable water

with ring fit joint including cost of

rings, as per IS specification no.

4985/1988 including all local and

central taxes, transportation, freight

charges, octroi, inspection charges,

loading, unloading, conveyance to

the departmental stores and

including cost of jointing meterial

etc. complete. 6 kg/cm2

Lowering, laying, fixing and

jointing PVC/uPVC/cPVC pipes

and specials of following class and

diameter including cost of

conveyance from stores to site of

works including cost of labour,

material, cement solvent, giving

satisfactory hydraulic testing as per

Work of Temporary diversion of

sewage by plugging the

machineholes at upstream and

downstream of the sewer stretches

proposed to be replaced. The rubber

plug required for the plugging the

drainage line shall be procured by

the contractor and the same shall be

the property of contractor.

150mm-400mm sewer line 12.00 20089.29 Nos.

SR.No. ITEMS QTTY. PER

450mm-600mm sewer line 12.00 20982.14 Nos.

700mm-1200mm sewer line 6.00 23660.71 Nos.

Providing & Installation of

barricades incl. supplying, painting,

with flurescent paint and fixing, CGI

sheets 24 SWG of 1.80 m height &

M.S. posts angle 40 x 40 x 5 mm at

2.0 m c/c and dismantling the same

after complition of work as directed

by Engineer - in - Charge.

Carting and Recarting of excavted

earth from any site to required place

as per requirement and directed by

engineer in charge

(K) Above 5.0 K.M. & Up To

Preparation of as built drawing of

pipeline and different valves laid

under this work by showing

location of each and every pipe in

two dimension-horizontal and

vertical with respect GIS

systemalong with invert levels of the

pipeline and different valves . The

Contractor shall submit two sets of

as built drawings periodically,

without which the subsequent R.A.

Bill of the work will not be

processed payment purpose. On

completion of the entire work the

contractor shall submit as built

drawings for the whole work in six

(6) sets along with two (2) soft

copies as directed by the Engineer-

in-charge. The item includes all

required equipments, materials, man

power for execution of complete

SR.No. ITEMS QTTY. PER

Drilling of various dia Horizontal

borehole for watermain pipeline

crossing under the road incl. in all

strata with required length incl

providing and fixing of various dia

M.S/RCC casing pipe with pushing

etc complete for various dia without

Watermain & with Providing and

Fixing of MS Casing pipe of

following diameter.

824 mm OD 12 mm thickness - 22358.84 Rmt. -

924 mm OD 12 mm thickness 105.00 24911.46 Rmt.

1028 mm OD 14 mm thickness - 31065.24 Rmt. -

1232 mm OD 16 mm thickness - 41189.38 Rmt. -

1420 mm OD 20 mm thickness - 57779.51 Rmt. -

1844 mm OD 22 mm thickness - 80070.79 Rmt. -

2248 mm OD 24 mm thickness 20.00 105184.36 Rmt.

Demolition/Dismentalling RCC

work or masonary work or removing

of paver block flooring in any part

inculuding stacking of

serviceable/useful material and

disposal of unserviceable material

with all lead and lift.

(a) Brick masonary work/Paver

(b) RCC work 25.00 1057.47 CM

(c) Unreinforced c.c. 25.00 609.26 CM

Providing and Casting in situ mass

cement concrete in grade M10

proportion 1:3:6 (1 cement :3-

coarse sand : 6- graded stone

aggregate of 40 mm nominal

size)using granite quartzite trap

metal of size 12mm to 25mm

including consolidation curing etc.

Without Formwork

Providing & construction brick

work using Fly Ash bricks having

crushing strength not less than

Kg./sq.cm. in foundation & plinth in

C.M. 1:6 (1 cement:6 sand ) etc.

comp. Foundation and plinth

Providing & Applying 15 mm th.

Cement plaster in single coat on

SR.No. ITEMS QTTY. PER

brick/concrete walls similar surfaces

for plastring & finished even &

smooth with a floating coat of

cement slurry mixed with admixture

of lime or neeru in required

proportion etc. complete in C.M. 1:3

(1 Cement : 1-sand)

Providing and laying cement

concrete 1:1.5:3 (1 cement: 1.5 sand:

3 graded stone agg. 20 mm nominal

size)& curing comp. lnclud.cost of

form work but exclu. Cost of 10.00 5292.00 CM

reinforcement for reinforced

concrete work in : (A) Foundation,

footing, Base of columns and Mass

Warning tape WARMAT ® Brand

PE warning tape with Anti Rodent

Properties ( Con Toxic, Non

Hazardous Eco friendly ROHS

Compliance & 100% recyclable)

Moc : LDPE, Roll length : 250 Mtr, 150.00 31.25 Rmt

Color : Green, Text : Black / White,

Length with non deletable high

(i) Size : 300 mm width x

Providing & laying in trenches

galvanised mild steel tubes(medium

grade) TATA / ZENITH / ASIAN /

JINDAL MAKE of the following 50.00 282.18 Rmt

nominal bore & tube fittings etc.

40 mm dia 50.00 425.33 Rmt

65mm dia 50.00 723.83 Rmt

Providing mantaing upto the

required period safe guarding

lightening the excavated trenches

with proper barricading, fencing

with timer balles, bamboos, G.I. 150.00 12.05 Sqmt

sheets, red fiag and red lights

alongwith the provision of the

chowkidars as directed by Engineer-

Temporary diversion of sewage

from House connection chambers,

SR.No. ITEMS QTTY. PER

Intermediate machineholes and Tee

chambers through 150 mm dia

corrugated Hose pipe supported at

suitable distances from the side and

conveying the sewage by gravity to

the downstream machinehole.

Providing & construction simple

chamber of 23 cm. th' B.B.

Masonary in C.M 1:5 with cement

plaster 15 mm th' in C.M. 1:3 inside

& outside to exposed faces, R.C.C.

top slab with 1:2:4 mix ( 1 cement:

2 Sand : 4 Grade stone aggregate

20mm size) ,Foundation concrete

1:5:10 & fixing C.I. cover with

frame to be not less than 38 kg. On

top etc. comp. Inside dimension,455

x 610 mm &450 mm deep for single

(A) Same as above but Precast RCC

heavy duty Cover instead of C.I. 5.00 2681.76 No.

Extra for every additional depth of

0.1 mt beyoung 0.45 mt

Removing of existing pipeline

incl. removal of specials, valves

jointing material including carting

and stacking of removed material

from site of work to the

department store as directed excl.

excavation and refilling.

Providing and casting in situ C.C. in

grade M-15 (approx. corresp. to

prop. 1:2:4) (proportions as per mix

design or as per Table 9 of IS456

2000 in masses by weigh batching )

using granite, quartzite trap metal of

SR.No. ITEMS QTTY. PER

size 6 mm to 20 mm for RCC work,

including scaffolding centering,

form work, needle vibrated

consolidation, curing comp. up to

meter depth or height (excluding

cost of reinforcement and neat

finishing) with centering and

shuttering/deshuttering etc. comp.

for the thrust block inclg. cost of

form work. With Formwork

Providing and casting in situ C.C. in

grade M-20 (proportions as per mix

design or as per table9 of IS456

2000 in masses by weigh batching )

using granite, quartzite trap metal of

size 6 mm to 20 mm for RCC work,

including scaffolding centering,

formwork, needle vibrated 5.00 5520.00 Cum

consolidation, curing complete up to

6 meter depth or height (excluding

cost of reinforcement and neat

finishing) with centering and

shuttering/deshuttering etc.

complete for structure other than

water retaining (Below G.L)

Providing and cast in situ C.C. in

grade M-30 proportions of

ingredients as per mix design by

weigh batching using granite,

quartzite trap metal of size 12 mm to

20 mm and or 6 mm to 12 mm

including scaffolding centering

formwork, needle vibrated

consolidation, curing and hydraulic

testing etc. complete (excluding cost

of reinforcement) with centering and

shuttering/deshuttering etc. comp.

up to 6 meter height /depth Av.

G.L.for all water retaining structures

( A )Bottom base slab 5.00 6905.00 Cum

( B )VerticalWall/kerb (Th. Above

(C) Column 5.00 9317.00 Cum

(D) Beam 5.00 8486.00 Cum

(E) Slab 5.00 8213.00 Cum

Steel work welded in built up

sections, framed work including

5.00 9047.86 Quintal

cutting, hoisting, fixing in position

and applying a priming coat of red

SR.No. ITEMS QTTY. PER

lead paint (A) in beams & joists

channels angles, tees, flats with

connection plates or angle cleats as

in main & cross beams,hip & trussed

purlins connected to common raffers

Providing, Laying and jointing on

true line and level UPVC pipe

(SCH-40) line of

Prince/Supreme/Jain/Astral/

Tulsi/Finolex make including

fittings make or equivalent as

approved by angineer-in-charge.

Pipe shall be fixed on the wall the

help of clamp at every two meter

C/C or shall be concealed as directed

including necessary fittings etc.

including testing of pipe and joints

and fixing the same with adhesive

solvent, including cost of all

15 mm Dia 50.00 72.65 Rmt

25 mm Dia 50.00 91.84 Rmt

40 mm Dia 50.00 148.12 Rmt

50 mm Dia 50.00 195.67 Rmt

Supplying cutting, bending, binding

and placing in position steel as per

plan and design and as per ISS

including cost of steel and binding

wire for reservoirs / structures only

including lift upto 6 mt. height or

depth below G.L. for all diameters.

Thermo mechanically trated (TMT)

bars Fe-500 grade for all diameters.

Providing interlocking type Rubber

moulded cement concrete paver

block of approved shape, design &

colour having 60mm thickness (M-

35) purchased from SMC's approved

paverblock manufacturer only &

fixing of fine sand bedding. Item 10.00 524.00 Sqm

includes levelling by using vibratory

plates compacted machine. Item also

includes all materials, labour,

equipments, tools, plants, watering,

cleaning etc. complete.

(Without colour)

SR.No. ITEMS QTTY. PER

Providing constructing brick

masonry inlet chamber of 750 x

x 1500 mm internal dimension with

necessary excavation refilling

mm thick brick masonary in CM 1:4,

150 mm thick PCC and benching in

CC 1:2:4, 12 mm thick plaster in

CM 1:3 for inside and cement 55.00 13548.00 No.

pointing in CM 1:3 for outside,

providing and fixing pre-cast RCC

frame and cover of M-30 grade as

per drawing and specifications -

Rate for 1.5 m depth. Add or ded.

Rs. 701 for every 10 cm increase or

decrease in depth

Providing, Supplying and fixing

brass ferrule of approved make of

following sizes inclusive all taxes,

insurance, transportion, fright

charge, inspection charge etc.

Coloured RCC Precast Machinehole

Frame & Cover Manufacture,

supply & Delivery at store or at site

of work precast RCC M-40 Grade

Frame & Cover suitable to drainage

machinehole and as per type design 419.00 2294.00 No.

& drawing including cost of

reinforcement M.S. Angles or Flat,

curing mold work etc

(A) Extra Heavy Duty Machinehole

Frame of I.S.I. Mark

(B) For Scraper machinehole 12.00 7289.00 No.

(C) For House Connection Chamber 1676.00 1733.00 No.

TOTAL AMOUNT Rs.

TOTAL AMOUNT Rs.