REPAIRS CLEANING OF SEPTIC TANKS SEWAGE LINES MANHOLES COVER SLABS ETC

Amount

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc, or for shafts, wells, manholes etc, not exceeding 10 sqm on plan and getting out in soft / loose soil complete all as specified and as directed.

Returning, filling in spreading levelling, watering and well ramming in layers not exceeding 25mm thick using soft/loose soil.

Removing excavated material (soil) to a distance n.exc 50 mtr and depositing where directed at a distance as directed by EIC

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed.

Demolition of brick work or stone boulder masonry built in cement mortar including all quions, arches, pillars etc complete all as specified and as directed.

Material and labour for brick work with sub class B bricks straight or curved on plan exceeding 6 meters mean radious built in cement motar 1:4 complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick/concrete surfaces in CM 1:4 and finished even and smooth without using extra cement including mixing of water proofing compound (Water Proofing Compound will be measured and paid separately).

Supply only Integral Water Proofing Compound.

Demolition of cement concrete in ground floors and pavings n.exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L for plain cement concrete (1:4:8) type D2 (using 40mm graded stone aggregate) as in foundation, filling, mass concrete etc, complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F for framed work such as grills, gratings etc with end bars shouldered or riveted or forged into spikes framed guard bars barred iron doors ladders, framed balusters, walkways, railings, water tanks and similar work conformimg to Fe-290 Gde E-165 etc fof complete all as specified and directed.

S&F for in repairs Cast Iron FG-150, un machined, in brackets, gully traps, gratings, railings, frames, manhole covers, fire and soot doors, dampers, stop valve boxes, gate stops, parts of ranges, balusters and similar articles, manhole cover with frame complete all as specified and directed.

M&L for Salt-glazed stoneware drain pipes laid and jointed in cement mortar complete with collars 100 mm dia bore of pipe complete all as specified and directed.

All as per Sl Item No. 14 here-in-before but for 150 mm dia pipe

M&L for cement concrete (1:3:6) type C2, 40mm graded aggregate as in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 100mm bore for SGSW pipes complete all as specified and directed.

All as per Sl Item No. 16 here-in-before but for 150 mm dia pipe

Dismantling floor hearth or wall tiling including cement mortar (but not backing) removing off the premises complete all as specified and directed.

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for 60mm thick machine pressed precast concrete interlocking paver blocks of shape and size with grey cement of pigment as approved by GE etc complete all as specified and as directed.

M&L for Providing precast cement concrete in landings cover slabs (for manholes etc.) chullah, hoods, chajjas, water troughs mangers, shelves and similar articles with plain faces With B1 Type, 1:2:4 mix, (using 20 mm graded aggregate) set in cement mortar 1:4.

M&L for reinforcement steel using TMT bars, of 10 mm dia and over cut to length bent to shape required including cranking, bending spirally for hooping for column hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

M&L for plain cement concrete (1:2:4) type B1 (using 20 mm graded aggregate) as in coping, haunching/benching including necessary form work complete all as specified and directed.

M&L for extra forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends complete all as specified and directed.

M&L for cleaning of existing 150mm dia sewage line pipe by rodding with split bamboo/cleaning rod so as to clear the blockage and allow the effluent to flow to the next manhole, removal of sludge and other materials obtained from the sewage line to a distance exceeding 1.5 KM but not exceeding 5 KM and cleaning the complete sewage line including making good with out any damages to the sewage line etc complete all as specified and directed.

All as per Sl Item No. 25 here-in-before but for 100 mm dia pipe

M&L for cleaning, removing of silt, debris and sludge including bailing out of water from manholes of depth n.exc 1.50 mts and removing material to a distance exceeding 1.5 Km but not exceeding 5 Km and cleaning the complete manhole including making good with out nay damanges to the manholes etc complete all as specified and as directed.

All as per Sl Item No. 27 here-in-before but for depth exc 1.50 mtrs but n.exc 3.00 mtrs

M&L for cleaning/de-sludging of existing septic tanks including bailing out water / sewage completely mechanically or manually and removing the material to a distance exceeding 1.5 Km but not exceeding 5 Km and cleaning the complete septic tank including making good with out any damages etc complete all as specified and as directed.

Taking down eaves gutters/rain water/soil pipes/PVC pipes including all fittings any size and pattern.

S&F in repairs, 110mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

All as per Sl Item No. 31 here-in-before but fixed to walls.

S&F in repairs, 75mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

All as per Sl Item No. 33 here-in-before but fixed to walls.

S&F 110 mm bore PVC (SWR) bends of any radius complete all as specified and directed.

All as per Sl Item No. 30 here-in-before but 75mm bore.

BHARATHI ENTERPRISES

SRI GOWRI ENGINEERING WORKS

SRI DHANESWARI ENGINEERING WORKS

SREE VSM ENGINEERING

B.Veerabhadra Rao