Loading…
Loading…
Tender ID
Tender Value
₹8.6 L
EMD Value
₹21,600
Closing Date
12 Mar 2026, 12:00 pmClosed
Executive Engineer,TDB Trivandrum
Office of the Executive Engineer TDB Nanthancode Trivandrum
Thrikkapaleswaram Devaswom in Kottarakkara Group-Reconstructing Pattambalam-reg (RE-TENDER)
2025_TDB_824693_2
EET/eT-98/2025-26
Open Tender
Civil Works - Buildings
Percentage
120 days
Thrikkapaleswaram Devaswom
Please refer Tender documents.
6 documents required · 6 mandatory
₹2,042
₹21,600
9 Mar 2026
9 Mar 2026
13 Mar 2026
9 Mar 2026
12 Mar 2026
9 Mar 2026
Clearing and leveling the site-Man coolie
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:4:8 (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 nominal size)
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).
Centering and shuttering including strutting, etc. and removal of form for: Foundations, footings, bases of columns, etc for mass concrete
Centering and shuttering including strutting, propping etc. and removal of form for : Columns, Pillars, Piers, Abutments, Posts and Struts.
Centering and shuttering including strutting, propping etc. and removal of form for: Lintels, beams, plinth beams, girders, bressumers and cantilevers.
Centering and shuttering including strutting, propping etc. and removal of form for : Suspended floors, roofs, landings, balconies and access platform
Centering and shuttering including strutting, propping etc. and removal of form for all heights of slabs and breaks in floors and walls under 20cm wide.
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo - Mechanically Treated bars of grade Fe-500D or more
Random rubble masonry in cement mortar 1:6(1 cement:6 coarse sand) with hard stone in foundation and basement up to plinth level.
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in : Cement mortar 1:4 (1 cement : 4 coarse sand).
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5m.
12 mm cement plaster of mix :1:4 (1 cement: 4 fine sand)
9mm cement plastering of mix:1:3 (1cement :3 fine sand)including all cost of materials, labour charges etc complete.
Forming reapers having 50x25mm size by using CM 1:4(1 cement : 4 coarse sand) for laying M.P.roofing tiles 410mm or nearest available size.
Roofing with first class MP roofing tiles 410x235mm or nearest available size.
Roofing with 400 mm or nearest available size MP hip and ridge tiles first class set in CM 1:4 including finishing the edges
Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications: Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqm.
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand),jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc. complete.Size of tile 600x600mm
Supplying and fitting copper thazhikakudom as per sasthric principles.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.14 MB
priliminaryagrementcorrected.pdf
Tender Documents • 0.02 MB
BOQ_1420653.xls
BOQ • 0.34 MB
NITfinal.pdf
Tender Documents • 0.12 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .