E.TNo.-EDC(USN)22/2024-25

Amount

Annexure-A (LABOUR CHARGES)

Earthing of support with M.S. Earth rod of 2.5 meter long by hammaring of M.S. Rod to proper depth and connecting the earth electrode with the help of G.I. wire as per construction manual.

Fabrication of MS Channel angle iron etc in required sizes with drilling of holes upto good finish for top channel ,bracing and special type bracket etc. as per RESPO schedule and local approved drawing.

Excavation of earth for stay pit of size 0.6x0.6x1.2 mtr in all types of soil including proper dressing of sides and ramming of bott om including getting out the excavated soil and disposal of surplus excavated soil as directed complete work

Fixing,tightening and nozzling of stay with pole and stay rod on required tension as per drawing/manual in LT line.

Fixing,tightening and nozzling of stay with pole and stay rod on required tension as per drawing/manual in 11 KV Line.

Grouting of Stay in size 0.6x0.6x0.3 in CC ratio 1:4:8 (1 cement : 4 graded stone 20mm nominal size : 8 coarse sand) block includ ing cost of Cement,sand and stone ballast back filling of soil and boulders in pit and ramming and proper alignment, leveling as per RESSPO Manual.

Excavation of earth for pole pit of size 0.9x0.6x1/6 of full length of pole for erection of pole in all types of soil including proper dressing of sides and ramming of bottom including etting out the excavated soil and disposal of surplus excavated soil as directed complete work.

Erection of PCC single support pole in proper level and alignment along with fixing of all accessories like top channel & clamps as per RESPO manual

Erection of SP-55 single support pole in proper level and alignment along with fixing of all accessories like top channel& clamps a s per RESPO manual

Erection of PCC double support pole in proper level and alignment along with fixing of all accessories like top channel, X bracings & clamps as per RESPO manual

Erection of Sp-55 double support pole in proper level and alignment along with fixing of all accessories like top channel, X bracings & clamps as per RESPO manual

Excavation of earth of size 2.1x2.1x1.2 meter of DTR Plinth

Cement concreting work in ratio 1:4:8 of DTR Plinth

Brick work in 1:4 ratio of DTR Plinth

RCC Work of 1:2:4 ratio 15 cm thickness of DTR Plinth

Cement Plaster on side walls in 1:4 ratio of DTR Plinth

Installation/mounting of new 100 KVA Tranformer on pole structure and fixing of channel / angle etc. and making all connections of Ht and LT side and its complete commissioning.

Installation/mounting of new 63 KVA Tranformer on pole structure and fixing of channel / angle etc. and making all connections of HT and LT side and its complete commissioning.

Installation / mounting of new 400 KVA/500 KVA Tranformer on plinth structure and fixing of channel / angle etc. and making all connections of Ht and LT side and its complete commissioning.

Installation / mounting of new 250 KVA Tranformer on plinth structure and fixing of channel / angle etc. and making all connections of HT and LT side and its complete commissioning.

Laying, Spreading, Stringing and sagging of 11 KV / 33 KV line in 3 phase (3 Phase 3 wire) of ACSR Weasel as phase wire with G.I. earth wire complete including fixing of all accessories in 3 Nos. conductor in parallel with binding and jumpering as per profile and profile and sagging chart.

Laying, Spreading, Stringing and sagging of L.T. Lines of ACSR Weasel as phase wire(3 phase 4 wire) with G.I. earth wire complete wi th binding and jumpering as per RESSPO Specn

Laying, Spreading, Stringing and sagging of L.T. Lines of ACSR Weasel as phase wire(2 phase 3 wire) with G.I. earth wire complete with binding and jumpering as per RESSPO Specn

Route cleareance by cutting of tree branches / proning, loping and chopping of trees for L.T., 11 & 33 KV line.

Cartage of PCC Poles from store centre to construction site with loading, unloading at both points and proper stacking.(Distance 21- 50 Km)

Cartage of ST pole SP-55 Poles from store centre to construction site with loading, unloading at both points and proper stacking.(Distance 21-50 Km)

Cartage of other material (other than poles) by vehicle from Store Center to nearest construction site Store including loading and unloading at both ends(distance 21-50 Km)

Cartage of the 63 KVA transformer from store center to construction site with loading and unloading at both points.(Distance 21-50 Km)

Cartage of the 100 KVA transformer from store center to construction site with loading and unloading at both points.(Distance 21-50 Km)

Cartage of the 250 KVA transformer from store center to construction site with loading and unloading at both points.(Distance 21-50 Km)

Cartage of the 400/500 KVA transformer from store center to construction site with loading and unloading at both points.(Distance 21 -50 Km)

Headload cartage of PCC Pole from road to site(distance 0-1 Km)

Headload cartage of SP-55 Pole from road to site(distance 0-1 Km)

Head load cartage of small material(distance 0-1 Km)

Headload cartage of 63 KVA transformer from road to site(distance 0-1 Km)

Headload cartage of 100 KVA transformer from road to site(distance 0-1 Km)

Headload cartage of 250 KVA transformer from road to site(distance 1-3 Km)

Headload cartage of 400 KVA transformer from road to site(distance 0-1 Km)

Digging of Pit through Hammer at CC, DAMAR Road

Providing/Supplying and Fixing of FRP Fencing and Fixing at Proper Position with fixing of Door as per Require for CSS with Complete Civil Work.

Laying of 1x120 Sq.mm XLPE Cable

Laying and erection of L.T. XLPE Cable lx240 mm2 (Al.) including crimping of lugs of size I x240 mm2

Painting of Frame/Ladder/Stair/ Railing as per director of Engineer in Charge

Transportation Charges of 25 KVA from contractor works to UPCL site/Store Center including packing, forwarding, loading, unloading, stacking and transit insurance.

Transportation Charges of 63 KVA from contractor works to UPCL site/Store Center including packing, forwarding, loading, unloading, stacking and transit insurance.

Transportation Charges of 100 KVA from contractor works to UPCL site/Store Center including packing, forwarding, loading, unloading, stacking and transit insurance.

Transportation Charges of 250 KVA from contractor works to UPCL site/Store Center including packing, forwarding, loading, unloading, stacking and transit insurance.

Annexure-B (SUPPLY ITEMS)

Supply of MS Holding Clamps

Supply of LT Clamp for PCC Pole with N&B

Supply of Stay Clamp off size

Supply of M.S. Half Clamps for fixing of Fuse set

Supply of Double Pole Clamps with N&B for PCC Pole

Supply of Double Pole Clamps with N&B for STP SP-55 Pole

Supply of Shackle Insulator 75x90 mm with N&B

Supply of CU strip 45x5 mm

Supply of Al. Crimping Type Lugs 120 Sq.mm

Supply of Al. Crimping Type Lugs 400 Sq.mm

Supply of Al. Crimping Type Lugs 240 Sq.mm

M/S J K ELECTRICALS (BID ID -337219)

TNK Electricals (BID ID -337145)