T.No.-EDC(USN)43/2024-25

Amount

Annexure-A (LABOUR CHARGES)

Laying of Barbed Wire as per instruction of Engineer in charge

Excavation of earth for pole pit of size 0.9x0.6x1/6 of full length of pole for erection of pole in all types of soil including proper dressing of sides and ramming of bottom including etting out the excavated soil and disposal of surplus excavated soil as directed complete work.

Erection of SP-55 single support pole in proper level and alignment along with fixing of all accessories like top channel & clamps as per RESPO manual.

Muffing of poles size 0.45x0.60 cm radius with 1:3:6(1 cement:3 coarse sand :graded stone 10 mm nominal size) block size 45 cm height from ground level including cost of cement, stone and sand etc.

Dismantling of existing HT line including disc fitting, Insulator, clamps, Nut & Bolts and consumer connections and Street light connections etc. including rolling of conductor and cartage back from site to JE store(ACSR Weasel)

Painting of SP-55 pole with angle and channel and all steel part by one coat of Red Oxide Primer and two coats of aluminium Paint and two strip of fluorescent altemate Red and White paint 30 Cm wide upto 1.5 Mtrs. From ground level.

Cartage of ST pole SP-55 Poles from store centre to construction site with loading, unloading at both points and proper stacking.(Distance 21-50 Km)

Cartage of other material (other than poles) by vehicle from Store Center to nearest construction site Store including loading and unloading at both ends(distance 21-50 Km)

Headload cartage of SP-55 Pole from road to site(distance 0-1 Km)

Headload cartage of small material(distance 0-1 Km)

Straightning of Tilted STP Poles

Back Carriage of Petty material, 0-20 Km

Fixing of IPC with AL. Bail for Earthing.

Removing Heavy Tree Branches from line.

Fixing of 11 KV 90KN Tension Clamp B&IPC

Fixing of 11 KV Suspension Ties.

Fixing of 11 KV IPC for CC to CC Conductor.

Fixing of 11 KV IPC for CC to Bare Conductor.

Fixing of 11 KV Mid Span Jointing Kit.

Opening of 11 KV Jumper and Making again of section pole

Laying Spreading, Stringing AAAC Conductor.

Earthing of support with M.S. Earth rod of 2.5 meter long by hammaring of M.S. Rod to proper depth and connecting the earth electrode with the help of G.I. wire as per construction manual.

Annexure-B (SUPPLY ITEMS)

Supply of MS NUT & BOLT Off size

Supply of Earth wire Clamp for SP-55 with N&B

Supply of 11 KV Cable Ties for Pin Insulator

Supply of 11 KV IPC for Covered to Covered Conductor.

Supply of 11 KV IPC for Covered to Bare Conductor.

Supply of 11 KV mid span Jointing Kit

Supply of IPC with Al. BAIL for Earthing 11 KV

Supply of 11 KV AAAC Covered Conductor AL-59, 99 Sq.mm.

Supply of Al.Lug 120 Sq.mm

Supply of Barbed Wire

Supply of ACE Chemrod DIA60MM Length 3000MM

Supply of Fluid Compound for Chemical Earthing Rod.

Supply of 11 KV Tension Clamp with BAIL & IPC

A T INFRAPOWER (BID ID -361502)

PERFECT ELECTRICALS AND ENGINEERS (BID ID -362103)