PROVISION OF SHED AND SPECIAL REPAIR TO STN MT AND AIRMEN BILLETS AT DARJIPURA AT AF STN BARODA

Amount

Taking down chowkats or frame n exc 1.5 Sqm each (without taking off shutter from the frame) complete all as speified and directed.

Taking down shutter only of any description n exc 1Sqm complete all as speified and directed.

Taking down shutter only of any description exc 1 Sqm n. exc 2 Sqm complete all as speified and directed.

S&F Powder coated aluminium work for door, windows and ventilators and and partition wall with one or more rebates fixed in position as per manufacturer's instruction including necessary joining cleat, glazing clips, rubber packing, beading ,plaster work on edges during fixing (if required)etc complete all as specified and directed.

S&F 4mm thick Sheet glass, ordinary quality and glazing with glazing clip and powder coated aluminium beading in square n exc 0.5 sq. m in each pane complete all as speified and directed.

Dismantling of floor hearth or wall tilling including cement mortar bedding (but not backing) rubbish off the permice complete all as speified and directed.

M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 SQM but not exceeding 0.11 SQM, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as speified and directed.

M&L for Glazed ceramic coloured tiles in vertical surfaces 300x200x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as speified and directed.

M&L for 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes all as specified and directed complete all as speified and directed.

M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:4 to receive tiles etc on vertical surfaces of walls complete all as speified and directed.

Taking down cement plaster any description on brick or stone wall/ celling including raking out joint , haking for key scrubing with water etc complete all as speified and directed.

M & L for 10 mm thick rendering in CM 1:6 on concrete surfaces / fair faces of brick masonary wall, finished even and smooth without using extra cement complete all as speified and directed.

M & L for 15 mm thick rendering in two layer 10mm thick backing coat in CM 1:6 and finishing coat 5mm in CM 1:4 using water proofing compoundon faces of brick masonary wall, finished even and smooth without using extra cement complete all as speified and directed. Note:- WPC will be measured and paid seperately.

M&L rendering 5mm thick on conc surface of ceiling CM 1:3 finishing the surface fair and even complete all as specified and directed.even and smooth without using extra cement complete all as speified and directed.

M&L Preparation of New plastered Surface of wall and application of two coats of Exterior Emulsion Paint over one Coat Primer complete all as specified and directed

Preaparation of new plaster wall surface and applying three coats of white wash on surface complete all as specified and directed

Preaparation of new plaster wall surface and applying three coats of white wash on ceiling surface complete all as specified and directed

M&L preparation of old surfaces and apply 3mm thick wall care putting on wall/ceiling finished complete all as specified and directed

M&L for Complete removal of existing treatment and applying three coat of white wash ocomplete all as specified and directed

All as above item No 19.00 but three coat of white wash on ceiling complete all as specified and directed.

M&L filling surface cracks not exc 5 mm to 7 mm wide with "Dr fixit" cracks X power or equivalent polymer molified cracks filler all as per manufacturer instructions complete all as specified and directed

M&L Factory made flush shutters 30mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides as in CB shutter as in shutter complete all as specified and directed

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specifications & drawings complete all as specified and directed

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawingspecification and drawing complete all as specified and directed

S&F 75mm long SS butt hinges and fixed to frame with scrwewd or welding complete all as specified and directed

S&F for 200mm long aluminium anodized barrel tower bolts of extruded section and fixed complete all as specified and directed

S&F for 150mm long aluminium handle cast type anodized complete all as specified and directed

M&L Preparation of new wooden surface of any description not otherwise described over 10cm width or grith and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed

Taking up or down 15mm bore steel tubing pipe and connections complete all as specified and directed

S&F 15mm dia tubes ‘Medium grade’ galvanized with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed

S&F in repairs vitreous China squatting pan, orissa pattern of size 580x440mm, white with integral foot rest incl connection to trap & flushing pipe complete all as specified and directed

S&F in repair vitreous china pedestal pattern white (excluding fixing both flushing cistern and flush pipe) complete all as specified and directed

Supply & fixing in repair plastic water closet seat white closed pattern with flat bottom and cover and mild steel chromium plated hinged device complete all as specified and directed

S&F in repairs 10 litres capacity PVC valveless symphonic action type, flushing cistern, low level, white, with inlet, ball valve float handle including brackets complete all as specified and directed

S & F in repairs Bib taps, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed to 15mm bore pipe. complete all as specified and directed

S&F in repairs Stop valves, cast copper alloy,screwed down,high pressure,with crutch orbutterfly handle,screwed bothends for iron pipe or for unions and fixed to15mm bore pipe complete all as specified and directed

S&Fin repairs 32/40mm PVC waste pipe for wash hand basin., 600mm long complete all as specified and directed

S&F PVC connection 15mm size with PTMT nuts of length 60cm complete all as specified and directed

S&F Towel Rail 600mm long CP fixed with and including Chromium plated brass screws and wooden/plastic cleats complete all as specified and directed

S & F Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed

M&L for spl treatment to sunken portion (inc necessary dismantling of tiles and PCC along with req PCC at site of mix 1:2:4 of req thickness) with 10mm thck plaster in CM 1:4 with WPC Liq complast 421 and applying one coat each of Nitroproof 100 and Nitroproof 120 on plastered surface. Rendering again 10 tck plast in CM 1:4 mixed with complas 421 in sunken portion of WC and CI pipe joint shall be filled including filling of lean conc 1:5:10 type E2 complete all as specified and directed

Dismantling of CI drain pipes 75/100mm internal dia, jointed in cement mortar and taking out of trenches, if required complete all as specified and directed.

S&F CI soil waste vent and rain water pipe 100 mm bore (ISI Marked) in any length with or without ears with cement joint laid in floor/fixed to wall complete all as specified and directed.

S&F 100mm bore branch piece single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed

S&F 100mm bore bend (any radius) with duck foot or heel rest complete all as specified and directed

S&F in repair Chromium plated shower roses of 125mm size with or without swivel joints, anysize, including fixing to steel pipe or union complete all as specified and directed

Demolition of Concrete any description and in any position not otherwise specifically provided for complete all as specified and directed

M & L for Hardcore broken stone or bouldersof gauge exc. 63 mm but n exc 100 mm depos-ited, spread and lev-elled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed

M&L for 150mm thick Cement concrete Type D2 1:4:8 (40 mm graded graded aggregate) as in sub bases,floor finishes and pavings complete all as specified and directed

M&L 100mm thick PCC 1:2:4 type B1 (20mm graded aggregate) as in levelling course complete all as specified and directed

M&L Forming 12mm thick Expansion joints 150mm filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A complete all as specified and directed

M&L Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade B complete all as specified and directed

M&L framed work as in roof trusses purlins rails,and fastening Beam,tee,angle, tie bar, chanels including distance pieces cleats etc Conf to Fe-410-W (gde-E-250) complete all as specified and directed.

M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed

S&F Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /clading to wall, fixed with self tapping screws complete all as specified and directed

Excavating in post holes insoft/loose soil each n.exc 0.5 cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm complete all as specified and directed

M & L for cement concrete 1:4:8 type D-2 (40mm graded aggregate) as in footings and foundation fillings complete all as specified and directed

Supply only water proofing compound complete all as specified and directed

Taking down carefully point wiring including (light, fan, socket or power complete fittings, such as switches, ceiling roses, pendant holders, Batten holders, shades conical fan regulators, light or power sockets etc) removing materials from site and making good disturbed surfaces of walls roofs etc complete all as specified and directed

M/L for Point wiring complete with 1.5 sqmm single core PVC insulated and PVC unsheathed (FR) multistranded copper conductor cable 1100 volt grade enclosed in and including PVC conduit concealed wiring with accessories by means of PVC sleeves Dash fastners and cadmium plated screws all as per ISI including sunk type boxes for mounting fitting like switches, socketes fan regulators with 3 mm thick phenolic Laminated sheet top covers concealed in walls etc including 1.5 Sqmm single core multi stranded copper conductor PVC insulated and unsheathed cable as earth continuity conductor to common earth dolly complete all as specified and directed

Note : (i) The quoted rates shall be deemed to be inclusive for cutting chases in brick walls/pillars etc for concealing the depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the portion of point wiring at RCC columns/ Beems/ Cielings shall be in surface conduit of suitable size fixed on surface plugs and provision of covering sunken boards/terminal boxes/junction boxes of any shape and size with 3 mm thick with suitable GI screws and cup washers. (ii) Fittings like switches sockets regulators, lamp holders light fittings shall be measured and paid for seperatly of Sch’A’. (iii) The size of conduits shall be determined on permissible No of runs of wires as specified in SSR part I However minimum size of conduits shall be 20 mm dia (medium grade).

One light point controlled by one one/way switch.

One Fan/Ex fan point controlled by one one/way switch.

All as per item No.61.00 above but wiring with 2.5 sqmm multistranded copper conductor unsheathed and 2.5 sqmm copper conductor unsheathed cable as earth continuity conductor for one 5 pin 15 Amps power socket outlet point on independent board complete all as specified and directed

M&L for sub main wiring using two run single core 4 Sqmm fire retardent PVC insulated and unsheathed cable with copper conductor 1100 vots grade, ISI mrked complete with PVC conduit accessories like bends tees etc and PVC insulatd copper cable 4 Sqmm for earth ire and connecting to earth dolly , complete all as specified and directed Note:- (i) Two runs of 4 sqmm and one run of 4 sqmm cable and one run of PVC conduit shall be measured as one RM. (ii) Necessary plastering in the disturbed surface of wall and distempering /white washing to match the existing colour shall be included in the unit rate quoted .

S&F switch piano flush type single pole one way 5 Amp 240 Volts. Complete all as specified and directed

S/F switch socket combination 5 pin 15 Amp 2 in one flush type Complete all as specified and directed

S/F ceiling rose surface bakelite three terminal 65 x 50 mm three terminal 250/230 volts ISI marked. Complete all as specified and directed

S/F in repairs DB's Sheet metal enclosure for SPN DB 8 way type 240 volts and 200 Amp ratings bus bar complete all as specified and directed.

S&F MCB in the DBs given below capacity complete all as specified and directed. :-

MCB SP up to 32 Amp, 240 volts

MCB SPN upto 40 Amp, 240 volts

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers ISI marked complete all as specified and directed

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, stainless steel connection pipe etc complete all as specified and directed.

Supply and lay for GI pipe 15 mm dia medium grade for water connection inluding all fitiing like Tee, elbows , union, socket and nipples etc required for connections all as specified and directed.

S&F bib tap cast copper alloy with crutch or butterfly handle, screwed down, screwed for ironpipe or for brass ferrule of 15mm bore screwed both ends for iron pipe of for unions complete all as specified and directed.

S&F angle valve/stop valve cast copper alloy with crutch or butterfly handle, screwed down, screwed for ironpipe or for brass ferrule of 15mm bore screwed both ends for iron pipe of for unions complete all as specified and directed.

M&L for Cutting into existing steel tubing for dia 25mm alterations or additions (Each cut measured) complete all as specified and directed.

M&L for screwing into existing steel tubing of dia 25mm for alterations or additions complete all as specified and directed.

Supply and fixing LED Tubelight fitting ENERGY Efficient LED BATTEN PC 20 Watt bright light with 25000 burning hours complete all as specified and directed.

Supply and fixing LED inverter Tubelight fitting aluminium body ENERGY Efficient 18 Watt with opal diffuser,IP 20 inbuilt battery back up aluminium body bright light with 25000 burning hours complete all as specified and directed.

Chanda Construction Co.

shree nathji trading corporation

LAXMI CORPORATION