Welcome Maintenance of certain BR and EM works at OMQ including Periodical services of certain various units and repairs to AC CGI sheet roofing incl repair replacement of certain misc works in certain bldg at Misa camp under GE S Tezpur

Amount

Taking down Shutters of any description, exc. 1.00 Sqm but not exc 2.00 Sqm Each and keep in Safe Custody for removing to store, complete all as specified and as directed.

Taking down chowkhats incl shutters (without taking off shutters from the frame n exc 1.5 sqm ,and keep in Safe Custody for removing to store complete all as specified and as directed.

Taking down and refixing of Shutters of any description exc 1 sqm but n. exc 2 sqm each in same opening with necessary hinges , screws complete all as specified and directed.

Taking down cement plaster on brick walls incl racking out joints, hacking key & scrubbing down with water,complete all as specified and directed.

Demolition cement concrete n'exc 15 cm thick (below or above ground level).complete all as specified and directed.

Dismantling floor, hearth or all tiling including cement mortar bedding (but not backing coat), removing serviceable tiles to store and rubbish off the premesises,complete all as specified and directed.

Dismantling of AC sheet corrugated / Semi corrugated sheets/ CGI sheets in wall cladding or in roof covering,complete all as specified and directed.

Dismantling Timber Fillets, Rails, Posts, Rafters, Purlings, etc., under 40 Sqcm in Section, in any Position, as in Unframed Work, complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided.complete all as specified and directed.

M & L Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with L type J type or cranked hook bolts complete all as specified and directed.

S&F pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in ridges, roof covering/clading /eaves board to wall and fixed with self tapping screws complete all as specified and directed.

Dismantling wall and ceiling board or insulation boards/ slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

M&L False ceiling fixed on aluminium powder coated snap grid to support the boards/files with aluminium anodised main 'T' section 36mm x 25mm x 1.40mm cross tee 23.50mm x 23.50mm x 1.40mm thick and aluminium angle 25mm x 25mm x 1.40mm as on edges/sides including hanging arrangements with 1.6mm dia GI wire and anodised adjuster complete all as specified and as directed.

M & L 4mm thick non asbestos fibre cement building board fixed/inserted to Aluminium frame work, as in ceiling complete all as specified and as directed.

S & F 35 mm thick factory made flush shutter , solid core construction ,with block board core and plywood face panel ,commercial type on both side,complete all as specified and directed.

S/F 35 mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass gauge etc. Divided into squares with plain chamfered or rounded, rebated sash bars, sizes of the members of the shutterscomplete all as specified and directed.

S & F PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supply & fixing in opening as per specification & drawing,complete all as specified and directed.

S&F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S.tubes for top & bottom rails.M.S.frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S.frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined to gether with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F Stainless steel medium weight cold rolled butt hinges 200 mm long ,complete all as specified and directed.

S&F Stainless steel medium weight cold rolled butt hinges 100 mm long and fixed.complete all as specified and directed.

S&F Aluminium anodised, barrel tower bolt of extruded section 150mm long ,complete all as specified and directed

S&F 150mm long aluminium handle, cast type, anodised ,complete all as specified and directed

S & F in repair Floor door stopper 140 mm long of aluminium alloy body and tongue, anodised,with hard drawn steel spring,complete all as specified and directed.

S & F in repair 300mm, ordinary rat tail rod pattern door springs including roller and roller plate complete all as specified and directed.

S&F in Repair 300mm long brass sliding door bolt with with sand or die cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts complete all as specified and directed.

S & F in Repair Mortice lock of brass of four levers ,vertical type, size 100 mm, complete all as specified and as directed.

S&F Stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperature 1.18 mm fitted with tinned tacles or galvanised wire staples complete all as specified and as directed.

S & F in repair Stainless steel wire cloth 0.63 mm nominal dia of wire and avg width of aperature 1.40 mm and fixed with stainless steel wire staples all as specified and as directed

M&L PCC 1:3:6 type C1 20mm grade aggregate as in filling of chowkhats hold fast or any other work or similar work complete all as specified and directed.

Dismantling of water tanks of storage capacity exc 500 ltrs but n exc 1000 ltrs from existing location and removal to store complete all as specified and as directed.

S&F Rotational Moulded Polyethylene (HDPE) Water Storage Tank 500 Litre Capacity (Cylin -drical Vertical with Closed Top), Black in Colour, Three Layered Construction, hoisted and fixed in Position all specified in MES Schedule Part-I including provision of 25mm x 100mm GI nippples with check nuts for inlet, outlet wash and overflow pipe including Lowering of old/ unserviceable Water Storage Tank of any description, complete all as specified and as directed.

S&F Rotational Moulded Polyethylene (HDPE) Water Storage Tank 1000 Litre Capacity (Cylindrical Vertical with Closed Top), Black in Colour, Three Layered Construction, hoisted and fixed in Position all specified in MES Schedule Part-I including provision of 25mm x 100mm GI nippples with check nuts for inlet, outlet wash and overflow pipe including Lowering of old/unserviceable Water Storage Tank of any description, complete all as specified and as directed.

S&F 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 20 mm - 210 gms) ,complete all as specified and directed.

M&L Double charge Vitrified Ceramic Tiles 10 mm thick (square/ rectangular) in light Shade, Polished, area of each tile not exc 0.36 sqm as in Floors, etc. Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the Shade of the Tiles over 15mm thick screed bed in cement sand mortar (1:6) complete all as specified and as directed.

M&L Vitrified Ceramic Tiles 10 mm thick (square/ rectangular) in Light Shade, Polished, Area of Each Tile nexc. 0.36 Sqm as in vertical surface such as Skirting, Dados, Risers to Steps etc. Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the Shade of the Tiles, complete over 10 mm thick backing layer cement mortar (1:4) complete all as specified and as directed.

M&L Non-skid coloured ceremic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specfied and directed.

M&L Glazed Ceramic Coloured Tile 350x250 x 7.0mm /450x350x7mm thick on Vertical Surfaces such as Skirting, Dados, Risers to Steps, etc., Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the Shade of the Tiles over and including 10mm thick backing layer in cement mortar (1:4) complete all as specified and as directed.

S&F Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match including 15 mm thick screed bed or bedding layer in CM (1:6) in floors complete all as specified and directed. complete all as specified and directed

S&F Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, on Vertical Surfaces such as Skirting, Dados, Risers to Steps, etc., Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the Shade of the Tiles over and including 10mm thick backing layer in cement mortar (1:4) complete all as specified and as directed.

M&L Prepolished Coloured Cement Concrete designers Chequered Tiles 300 x 300x 25 mm thick, set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles complete including 15 mm screed bed in CM (1:6) of thickness complete all as specified and as directed.

M&L 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

S&F Vitreous China Wash Hand Basin 550x400mm in size, White (Flat Back or Angle Back Type) with 32mm dia Brass Chromium Plated Waste Fitting, a pair of Cast Iron Brackets duly painted including Cutting and pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3 including taking down/out unserviceable Wash Hand Basin and connected Items, complete all as specified and as directed.

S&F Vitreous China Colour Wash down Water Closet Pan (Pedestal Pattern) with "p" or "s" trap front or back inlet including fixing Bolts with and excluding 10 litre capacity low level Flushing Cistern matching with water closet colour with inlet ball valve float handle and providing 32mm dia PVC flush pipe including plastic water closet seat with flat botton cover (coloured) fixed with mild steel chromium plated or aluminium hinging device and making good disturbed Surfaces in Cement Mortar 1:3 and fixed including Taking down/out unserviceable WC Pan and connected Items, complete all as specified and as directed.

S&F Vitreous China White Squatting Pan ‘ORISSA’ Pattern, size 580x440mm with ‘P’ or ‘S’ Trap, Integral Foot Rest, providing Joints between Flush Pipe and Socket of WC Pan including Flushing Cistern and Flush Pipe, fixing with and including provision of cement Concrete Bedding including Taking out/ down unserviceable WC Pan and connected Items, complete all as specified and as directed.

S&F White PVC Flushing Cistern 10 Litre capacity, Low Level Valve Less, Syphonic Action type with Inlet, Ball Valve, Float and Handle including Cutting and pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3 and fixed including taking down/out unserviceable Flushing Cistern and connected Items, complete all as specified and as directed.

S&F Swivel shower with shower arm 15mm size,195mm long with bend of 45 degree with flange of PTMT any colour as in repair complete all as specified and directed.

S&F Stop Valve 15 mm dia (bore), Cast Copper Alloy, Concealed type, Chromium Plated (Fancy type long Shank and Cup) screwed down high pressure with Crutch or Butterfly Handle, screwed both Ends for Iron Pipes or for Unions and fixed-in-repairs, complete all as specified and as directed.

S&F Angular Stop Cock 15 mm dia (bore), cast copper alloy, fancy type, chromium plated, screwed down, high pressure,with wall flange screwed for Iron Pipes or Brass Ferrule and fixed-in-repairs, complete all as specified and directed.

S&F Bib Tap 15mm dia (bore), Cast Copper Alloy, Chromium Plated, screwed down high pressure with Crutch or Butterfly Handle, screwed both Ends for Iron Pipe or for Unions and fixed-in-repairs, complete all as specified and directed.

S&F Two way bib cock with flange brass chromium plated fancy type screwed for 15 mm bore etc.as in repair complete all as specified and as directed.

S&F in repairs 15mm bore fancy type chromium plated bib cock long body with crutch or butterfly handle screwed down for iron pipes, complete all as specified and directed.

S&F in repairs 15mm bore fancy type PTMT bib cock long body with crutch or butterfly handle screwed down for iron pipes, complete all as specified and directed.

S&F chromium plated Health faucet with 8mm Dia, 1.2 Meter long flexible tube and wall hook with N.R.V (Back Flow Preventer) as in repair complete all and specified and directed.

S&F Chromium Plated waste coupling heavy full thread 32mm (brass) fixed to stainless steel sink including necessary fixing arrangement as in repair complete all as specified and directed.

S & F in repairs 32mm bore PVC Waste pipe for wash hand basin complete all and specified and directed.

S&F in repair Tubular towel rail 20 mm dia with brass chromium plated complete all as sfd and directed.

S&F in repair Tubular Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all and specified and directed.

S&F CP Soap dish of size 160x 160x90mm, any type, fixed to plugs with chromium plated brass screws complete all and specified and directed.

supply and fix toilet paper holder of vitrious china fixed to wall with chromium plated cp brass screw in repair complete all as specified and directed.

S&F PVC connection 15mm size with PTMT nuts of length 450mm complete all and specified and directed.

S&F Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all and specified and directed.

S&F in repair Glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all and specified and directed.

Supply and fix as in repair, PVC cabinet looking mirror with inner shelves for holding bath/saving kit of size 300x450mm complete all as specified and directed.

S&F in repairs 20 mm dia decorative curtain rods of MS conduit with polymer linning etc. with decorative side dome and brackets complete all as specified and directed.

M&L Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed in repairs complete all as specified and directed.

S&F Plastic water closet seat, in any coloure as directed closed pattern with flat/recessed bottom, and cover and mild steel chromium plated or aluminised hinging device for pedestal pan as in repair complete all as specified and colour as directed.

S&F Stainless Steel Sink with Drainage Board l.0mm thick Overall size 915mm x 460mm and Bowl size 410 mm x 355 mm x 165 mm for Kitchen or Laboratory with Plugs, Washers, Brass chromium plated Waste Fitting 32mm dia, PVC waste pipe, a Pair of Cast Iron Brackets duly Painted including Cutting and Pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3 including Taking down/out unserviceable Sink and connected Items, complete all as specified and as directed.

S&F 3-in-1 wall mixer for Hot & Cold water supply with telephonic shower arrarengement, brass chromium plated fancy type, screwed down for 15mm bore iron pipe incl necessary fittings & fixtures etc.as in repair complete all as specified and directed.

S&F Central hole for Hot and Cold water supply basin mixer, brass chromium plated screwed down for iron pipes,including necessary fittings etc as in repair , complete all as specified and as directed.

S & F powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

S&F Powder coated Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and as directed.

S&F Powder coated aluminium grill of design DG-104 pattern made out of 10 mm dia rod fixed withand including stranded aluminium frame of F section of size 23.40 x 15.3 x 1.4 mm thick all as per manufacture instructions complete all asspecified and directed.

S&F 5.50mm thick ordinary quality sheet glass in squares exc 0.5 sqm in each pane fixed in aluminium frame complete all as specified and as directed.

Dismantling and breakingup drain pipes AC /CI /PVC set in cement mortar 100mm/75mm bore , complete all as specified and directed.

S&F PVC (SWR) Soil, Waste and Ventilating Pipe 110mm bore (dia), single socketed, in any length with Rubber Ring Joints fixed to Walls, complete all as specified and as directed.

S&F PVC (SWR) Soil, Waste and Ventilating Pipe 75mm bore (dia), single socketed, in any length with Rubber Ring Joints fixed to Walls, complete all as specified and as directed.

S&F PVC (SWR) Bend 110mm bore (dia), any type, etc. and Jointing with Solvent Cement, complete all as specified and as directed.

S&F PVC (SWR) Junction 110mm bore (dia), Single (Single T) equal or unequal and Jointing with Solvent Cement, complete all as specified and as directed.

M&L Rendering (Internally) 15mm thick in Cement Mortar 1:6 on Brick Walls or on Concrete Surfaces, finishing plastered surfaces Even and Smooth without using Extra Cement complete all as specified and as directed.

M&L Rendering 15 mm thick in Cement Mortar on fair faces of brick work or concrete surface of wall in cement morter (1:4) using water proofing compound and finishing the surface even and smooth without using extra cement complete all as specified and as directed. . (NOTE:-WPC shall be measured and paid separately)

M&L 5mm thick ceiling plaster in CM (1:3) finishing the surface even and smooth without using extra cement complete all as specified and as directed.

Supply only integral water proofing compound complete all as specified and directed.

M&L preparing new steel surfaces and applying two coat of syntheitc enameled paint over a red oxide primer exc 10 cm width or grith, complete all as specified and directed.

M&L Preparing new plastered surface of wall and applying three coats of white wash incl cornice complete all as specified and directed.

M/L 75mm thick P.C.C 1:3:6 type C-2 using 40mm graded stone aggregate as in plinth protection/sub base/path etc complete all as specified and directed.

Demolition of brick work or stone masonry built in cement mortar including all quoins, pillars, arches etc. but excluding ashlar facings, dressed stone work and precast concrete articles, complete all as specified and as directed.

M & L bricks,sub class B bricks, straight or curved on plan to any radius in half brick thick in CM (1:4) complete all as specified and directed.

M&L brick work with sub class' B' bricks of old size, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6, complete all as specified and directed.

M & L for MS framed work of angle, tee, F.I, conforming to Fe-290 (Gde E-165), as in roof trusses including distance pieces, cleats etc. welding or riveted complete all as specified and directed.

M&L for taking down existing roof treatment from roof and fence and covered surface of old concrete roof picking ,sweeping cleaning and washing down with water remove dust etc felt/tar felt/PCC/plaster/tiles (any type) and rendering 15mm thick (1:4) mixed with water proofing compound as per manufacture and curing atlest 7 days by ponding water over the roof level. complete including disposal of debris out of defence land all as directed applying the roof treatment after cleaning the roof slab as directed by Engr-in-Charge, over finished and dried surfaces of RCC slab and apply one of cold bituminous primer conforming IS-3384-1088@ 0.3 ltr/Sqm and applaying APP modified water proofing membrane with non woven polyster reinforcement 3mm thick (minimum) and weight @ 3.50 Kg/Sqm and not less than 160 grams per sqm by torch application .the overlap shall not less than 100mm on revers direction and 75mm longitunal direction and sealing overlape as approved by GE and finally applying a coat of bituminous aluminum paint @ 0.10 ltr/Sqm over APP on treated top surfaces of roof complete all as specified and directed.

Taking down existing damaged IWC/EWC alongwith complete PCC and lime concrete from sunken floor and providing new IWC/EWC and water proofing treatment to sunken floor as per following stage :-(i) 15mm thick plastering in CM (1:2) with WPC at all around and base of sunken floor with proper slope.(ii) Applying a coat of 85/25 gde hot bitumen @ 0.7Kg/Sqm over a coat of bituminous primer @0.5Kg/Sqm and then pasteing of polythene film, 150 micron, matural colour with cold cut back adhessive.(iii) Fixing of 25mm dia GI pipe (med gde) spout of length 45 cm.(iv) Supply & fixing of vitreous china squatting pan, "ORISSA" pattern or padestal type, size 580x440mm white with integral footrest, P/S trap etc complete including providing PCC lean concrete in Mix 1:5:10 complete all as specified and directed.

M&L for applying two coats of acrylic emulsion distemper by smart painting method over & including primer (chalk whitening) using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed. Note : - (a) Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. Proper mashking to be carried out before primer and paint application). (b.) The work pertaining to periodical services & Water Proofing shall be executed from authorized applicator through manufacturer of which the materials .i.e. Paint, Distemper, Putty etc. is proposed to be used by the contractor and approved by Garrison Engineer. (c.) The contractor shall upload along with the documents under cover-I, ‘Memorandum of Understanding’ (MOU) with only one manufacturer mentioned in the contract, failing which the bid shall be liable to be rejected. (d) 07 years guarantee of painting work will be admissible after date of completion and earnest money amount will be reserve against painting work after date of completion for the 05 years.

Material & Labour for applying Two coats of 100% Premium acrylic emulsion exterior antifungus paint by smart painting method having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm Note- (a) Primer and emulsion application to be carried out through air less spray machine ( Only mechanical application allowed except in paint application on bands/chajja/building edges/borders/projections where contrasting color as specified and directed is to be applied) (b) The work pertaining to periodical services & Water Proofing shall be executed from authorized applicator through manufacturer of which the materials .i.e. Paint, Distemper, Putty etc. is proposed to be used by the contractor and approved by Garrison Engineer. (c) Cost of scafolding upto 10m hight of building is included in this item. (d) 05 years guarantee of painting work will be admissible after date of completion and 15% amount will be reserve against painting work after date of completion for the 05 years. (e) Necessary T&P and skilled men shall be made available by contractor during the entire Contract period.

Material & Labour for applying Two coats of 100% Premium acrylic emulsion exterior antifungus paint by smart painting method having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm & 1 mm thick layer of wall care putty. Note- (a) Primer and emulsion application to be carried out through air less spray machine ( Only mechanical application allowed except in paint application on bands/chajja/building edges/borders/projections where contrasting color as specified and directed is to be applied) (b) The work pertaining to periodical services & Water Proofing shall be executed from authorized applicator through manufacturer of which the materials .i.e. Paint, Distemper, Putty etc. is proposed to be used by the contractor and approved by Garrison Engineer. (c) Cost of scafolding upto 10m hight of building is included in this item. (d) 07 years guarantee of painting work will be admissible after date of completion and earnest money equivalent amount will be reserve against painting work after date of completion for the 05 years.

M&L preparing new Surfaces of Ceiling and applying Three Coats of White Wash, complete all as specified and as directed.

M&L Preparing old decorated plastered surfaces of Walls and applying One Coat of Cement Base Paint complete all as specified and as directed.

M&L Preparing new Surfaces of Walls and applying Two Coats of Cement Base Paint over a coat of primer complete all as specified and as directed.

M&L Preparing old Wooden Surfaces of any description not otherwise decribed nexc10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (First quality), complete all as specified and as directed.

M&L Preparing new Wood and Wood Based Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a coat of Pink Primer, complete all as specified and as directed.

M&L Preparing old Steel Surfaces of any description not otherwise decribed over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (First quality), including preparation of surfaces, complete all as specified.

Taking up or down Steel Water Tubing 15mm dia (bore) including Connections and Fittings, Segregating Serviceable Pipes & Fittings, Stacking properly at Site(s) and keep in Safe Custody for re-use, or removing to store, complete all as specified and as directed.

Taking up or down Steel Water Tubing 20mm dia (bore) including Connections and Fittings, Segregating Serviceable Pipes & Fittings, Stacking properly at Site(s) and keep in Safe Custody for re-use or removing to store, complete all as specified and as directed.

Taking up or down Steel Water Tubing 25mm dia (bore) including Connections and Fittings, Segregating Serviceable Pipes & Fittings, Stacking properly at Site(s) and keep in Safe Custody for re-use, or removing to store complete all as specified and as directed.

Supply and Laying Steel Water Tubing 15mm Bore (dia), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, complete as all specified and as directed.

Supply and Laying Steel Water Tubing 20mm Bore (dia), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, complete as all specified and as directed.

Supply and Laying Steel Water Tubing 25mm Bore (dia), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, complete as all specified and as directed.

Taking down point wiring (light, fan, socket and power complete including fixtures and fittings such as switches ceiling roses, pendents , regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody for refixing or for taking credit (credit for above items should be made as per conditions separately) and making good distrubed surfaces of walls, floors, etc.complete all as specified and as directed by Engineer-in-Charge.

M&L Point wiring for one light/fan/bell point controlled by one way with PVC insulated and unsheathed FRLSH cable single core multistranded copper conductor 1.5 sqmm size, 1100 volts grade cable conforming to IS - 694 1990 drawn through and including PVC casing caping of suitable size with all accessories including fabricated MS terminal boxes fixed flush with wall surface with 3 mm thick plastic masonite laminated sheet top cover fixed with cadmium screw for mounting switches, sockets, regulator etc including 1.5 sq mm FRLSH stranded PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly for one light or fan point controlled by one switch single pole one way for light/ ceiling fan/ exhaust fan /call bell point/ Switch socket outlet 5 amps complete all as specified and as directed. Note: Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board.

All as per Item No 109 above but one socket outlet 5 pin 6 amps on independent board.

All as per Item No 109 above but one 5 amps socket outlet on same board with other switch.

M&L fo Point wiring surface type with 2.5 sqmm (Nominal Area) PVC insulated stranded single core unsheathed FRLSH copper conductor cable 1100 Volts grade drawn through with and including PVC casing caping with all fittings and accessories of casing caping (like Tee, Bend etc) complete fixed to walls / ceiling etc with and including 2.5 Sqmm (nominal area) PVC insulated unsheathed, stranded, single core FRLSH copper cable as earth continuity wire connecting to common earth point (including supply & fixing of 1.6 mm thick pressed mild steel terminal boxes of suitable size with 3 mm thick PVC /plastic laminated sheet, top cover suitable sizes of brass screws and washers etc. for mounting sockets for 5 pin, 16 Amp Switch socket combination on independent board complete all as specified and directed. Note: Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board..

Supply and fixing Modular switch one way 6 Amp complete all as specified and directed.

Supply and fixing Modular switch one way 16 Amp complete all as specified.

Supply and fixing modular switch 2 way 10 Amp complete all as specified and directed.

Supply and fixing modular bell push 10 Amp complete all as specified and directed.

Supply and fixing call bell, AC 230 volts, single pole complete all as specified and directed.

Supply and fixing modular socket outlet 2 in 1, 3 pin 6 A complete all as specified and directed.

Supply and fixing Modular socket outlet 6/16 Amps complete all as specified and directed.

Supply and fixing Modular Fan stepped regulator, 120 W, 2 Module complete all as specified.

Supply and fixing angular lamp holder, PVC/Polycarbonate type all as specified and directed.

Supply and fixing ceiling rose polycarbonate isolated body 3 ways terminals.

Supply and fixing modular white cover plate with frame 2 modules complete all as specified and as directed.

Supply and fixing modular white cover plate with frame 3 modules complete all as specified and as directed.

Supply and fixing modular white cover plate with frame 4 modules complete all as specified and as directed.

Supply and fixing modular white cover plate with frame 6 modules complete all as specified and as directed.

Supply and fixing modular white cover plate with frame 8 modules complete all as specified and as directed.

Supply and fixing modular white cover plate with frame 12 modules complete all as specified and as directed.

Taking down old burnt/unserviceable submain wiring with aluminum/copper conductor PVC insulated cable of any size drawn through PVC casing caping/ PVC Conduit pipe including GI wire accessories etc. and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

M&L Sub main wiring with 2 runs of single core FRLSH type PVC insulated unsheathed stranded copper conductor of size 4.0 Sqmm and one run of PVC insulated unsheathed multistrand copper conductor FRLSH type of size 4.0 Sqmm as earth lead drawn into rigid non metalic PVC conduit of size 20 mm dia including all fittings complete all as specified and as directed. Note:- Two runs of 4 Sqmm conductor as main wire and one run of 4 Sqmm conductor as earth wire with one run of PVC conduit shall be measured as one unit.

M&L Sub main wiring with 2 runs of single core FRLSH type PVC insulated unsheathed stranded copper conductor of size 6.0 Sqmm and one run of PVC insulated unsheathed multistrand copper conductor FRLSH type of size 6.0 Sqmm as earth lead drawn into rigid non metalic PVC conduit of size 20 mm dia including all fittings complete all as specified and as directed. Note:- Two runs of 6 Sqmm conductor as main wire and one run of 6 Sqmm conductor as earth wire with one run of PVC conduit shall be measured as one unit.

Supply and fixed in repair 20 W LED light fitting wall mounted batten 4'ft , minimumm lumen output 100 lumen/Wat, extruded polycarbonate, enivromental friendly, heat sink provided for efficent heat dissipation and integrated electronic driver for 20 watt,6500K including necessary connection complete all as specified and directed.

Supply and fixed in repair 10 W LED light fitting wall mounted batten 2'ft , minimumm lumen output 100 lumen/Wat, extruded polycarbonate, enivromental friendly, heat sink provided for efficent heat dissipation and integrated electronic driver for 10 watt,6500K including necessary connection complete all as specified and directed.

Supply and fixed in repair security light fittings minimum 30 watts, minimumm lumen output 110 lumen/Watt, made up of pressure dia cast housing with prismatic polycarbornate diffuser and individual LED with secondary optic and IP65,6500k including necessary connection complete including 25mm dia light grade GI bracket with nut bolt and clamp complete with all accessories including connected with twin core twisted flexible copper conductor of suitable size complete all as specified and directed.

Supply and fixed in repair 12 W Surface panel mounted round LED downlight, aesthetically designed aluminium die-cast enclousers, with seperate replaceable constant current driver 12 watts, including necessary connection complete all as specified and directed.

Supply & fix in replacement of LED bulb 10 watt 6500 k complete all as specified and as directed.

Supply and fixing in repair LED 9 W decorative wall light made up of high grade engineering plastic material suitable for LED 9W complete as per manufacturer's instructions all as specified and directed.

Taking down and Refixing at site ceiling fans 1200/1400 mm sweep including opening of fans and cutting down burnt winding, and rewinding with new super enameled copper winding of same gauge as per existing winding, varnishing, drying, replacement of ball bearing, replacement of condenser etc and re-assembling the same including necessary transportation etc complete including taking down all as specified and directed.

S&F 3.15 Mfd Capacitor for Fan including taking out old unservicable one complete all as specified and directed.

Supply and fixed in repairs epoxy powder coated sheet metal enclosure for DBs, double door, Single pole and neutral 240 V, 8 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as specified and directed.

Supply and fixed in repairs epoxy powder coated sheet metal enclosure for DBs, double door, Triple pole and neutral 415 V, 4 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as specified and directed.

Supply and fixed in repairs MCB SP, 6 to 32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs including necessry connection complete all as specified and directed.

Supply and fixed in repairs MCB SPN 6-32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessry connection all as specified and directed.

Supply and fixed in repairs MCB TPN 63 Amps, 'C' series 10kA, 415 Volts and to be housed in DBs complete including necessry connection all as specified and directed.

Material and labour for earthing complete with galvanised mild steel earth plate electrode 600x600x6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI wire 4 mm dia as earth strip electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth wire encased in and including 20 mm dia GI 'light grade' pipe from upper end of earth plate upto equipments,20 dia bore GI pipe 'light grade' as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with MS round bars 6mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate of SSR Part I complete all as specified and directed and testing on completion. Note 1:-The contract sum shall be arrived at after deducting amount of schedule of credit from the total quoted amount. Note 2-Contractor's supervisor and main worker would wear shirt/T-shirt of colour sky blue/brown/yellow preferable embossed with contractor's firm name while carrying out any activities in defence area for better check of security purpose. Note 3:-The tenderer (all eligible contractors) shall ascertain the taxes & levies as on date. The subject tender caters all the taxes & levies as on date including the latest notification of GST issued as on date ( issued by Central Board of Indirect Taxes and Customs)

AVASANA SOLUTIONS PRIVATE LIMITED

M/s MN ENTERPRISRE

M/S Sharma Construction