REPAIR TO JOINERY, PLASTERING AND PLUMBING WORK IN SMQ AND TMQ AREA AT BARRACKPORE UNDER GE (AF) BARRACKPORE

Amount

Taking down chowkats or frames with shutters n.exc. 1.50 Sqm each (without taking off shutters from the frames) complete all as specified and as directed.

All as per item No 2.00 here in before but exc. 1.50 sqm and n.exc 4.00 sqm each and -ditto-.

Taking down shutters of any description n.exc. 1.00 Sqm each complete all as specified and as directed.

All as per item No 3.00 here in before but exc. 1.00 sqm and n.exc 2.00 sqm each and -ditto-.

Taking down shutters of any description exc. 1.00 sqm but n.exc. 2.00 Sqm each and refixing in the same opening complete all as specified and directed.

Demolition of brick work or stone boulder masonry, built in cement mortar including all quoins, arches, pillars etc. including removing of unserviciable material from site complete all as specified and directed.

Taking down cement plaster of any description built in cement mortar on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc. and removing debrish from site complete all as specified and directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided and removing materials from site complete all as specified and as directed.

Demolition of wall and ceiling boards (fibre, pulp insulation,etc.) or insulation boards/slabs/blankets any thickness, including cover filets complete all as specified and directed.

Material and labour for PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in hold fast complete all as specified and directed.

Material and labour for brick work with fly ash bricks, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.

Material and labour for cutting chases, pinning in brick wall making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing and making good, cutting not exc 10 cm girth complete all as specified and as directed.

Material and labour for second class hard wood small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary' labours; articles n. exc 200 cu. cm each including fixed with 50mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

Material and labour for well-seasoned 2nd class hard wood plain fillets, square, rectangular or triangular in section, wrought, secured with nails or brads, sectional area exc. 13 sqcm but not exc. 25 sqcm complete all as specified and as directed.

Supply and fix 30mm thick flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified and directed.

Supply and fix 30mm thick 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) complete all as specified and directed.

Supply and fix solid PVC door frame of size 50x47 mm made out of 5mm PVC sheet plain colour reinforced with MS square tube as per specification and drawing complete all as specified and directed.

Supply and fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as specified and directed.

All as per item No 18.00 above but wire gauzed shutter, the wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly and -ditto-.

Supply and fix steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

Supply and fix steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed.

Supply and fix steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed.

Suplly and fix 100mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

Suplly and fix stainless steel 100mm size butt hinges, medium weight complete all as specified and directed.

Supply and fix 150mm long aluminium handles, cast type, anodized complete all as specified and directed.

Suplly and fix 150 mm long aluminum anodised barrel tower bolts cast type complete all as specified and directed.

Suplly and fix 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy complete all as specified and directed.

Supply and fix galvanised steel wire cloth, 0.56mm nominal dia or wire and average width of aperture 1.00mm and fixed with stainless steel wire staples complete all as specified and directed.

Supply and fix in repair galvanised steel wire cloth, 0.56mm nominal dia or wire and average width of aperture 1.00mm and fixed with stainless steel wire staples complete all as specified and directed.

Supply and fix in repair stainless steel 20mm dia curtain rod fancy type including fixing brackets and knobs fixing at end of pelmet or independently on wall complete all as specified and directed.

Supply and fix in repair tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

Supply and fix mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars; barred iron doors; ladders, framed balusters, walk ways; railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

Supply and fix structural steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing conforming to Fe-410 W (Gde E-250) quality-A complete all as specified and directed.

Material and labour for 1mm thick mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed.

Material and labour for welding in repairs n. exc 2.5cm in length, thickness of metal to be welded exc 6mm but n. exc 9mm complete all as specified and directed.

Supply and fix in repair 18/19mm thick pre-laminated particle board, exterior grade, pre-laminated both side with decorative choice lamination with 25mm thick 2nd class hard wood leaping fixed with screws to timber frame work complete all as specified and directed.

Supply and fix 4mm thick non asbestos fibre cement designer board conforming to IS-14862 type-B category-3 of ocean texture as in false ceiling with GI snap grid/section of size 600mm x 600mm fixed to wall hanging from soffits/trusses using adjustable supporting hanger comprising of 4mm dia MS rod or wire ‘J’ type hook, nuts, bolts, holding down clips with GI section of size 38mm x 24mm x 0.4mm (main tee) and 28mm x 24mm x 0.3mm (cross tee) and wall angle of size 24mm x 24mm x 0.3mm complete all as specified and directed.

Material and labour for 10mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar (1:6) and finish the surfaces even and smooth without using extra cement on wall complete all as specified and directed.

Material and labour for 5mm thick rendering on concrete surfaces in cement mortar (1:3) and finish the surfaces even and smooth without using extra cement in ceiling complete all as specified and directed.

Material and labour for 15mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar (1:4) and finish the surfaces even and smooth without using extra cement as in wall complete all as specified and directed.

Material and labour for preparation of new plastered surfaces of walls and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed.

Material and labour for preparation of new plastered surfaces of walls and applying two coats of acrylic washable distemper over a coat of alkali resistance primer complete all as specified and directed.

Material and labour for preparation of new plastered surfaces of ceiling and applying three coat of white wash complete all as specified and directed.

Materials and labour for complete removal of existing treatment on walls and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming one coat of exterior primer applied @ 0.90 litre/ 10 sqm including preperation of surface complete all as specified and directed.

Material and labour for preparation of old decorated surfaces of walls and applying one coat of acrylic washable distemper complete all as specified and directed.

Material and labour for preparation of old decorated surfaces of wall and applying one coat of white wash complete all as specified and directed.

Material and labour for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Material and labour for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Material and labour for preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

Supply and fix 4 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads, nails etc in square not exc 0.5 sqm in each pane complete all as specified and directed.

Supply and fix 4 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads, nails etc in square not exc 0.5 sqm in each pane including hacking out old broken glass complete all as specified and directed.

Supply and fix 15 mm bore steel tubes medium grade, galvanised, with all fitting and fixed to walls, ceilings, roofs or laid in floors including taking down existing unserviciable GI pipe complete all as specified and directed.

Supply and fix 20 mm bore steel tubes medium grade, galvanised, with all fitting and fixed to walls, ceilings, roofs or laid in floors including taking down existing unserviciable GI pipe complete all as specified and directed.

Supply and fix in repair 15mm bore stop valves, cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

Supply and fix in repair 15mm bore fancy type pillar tap cast copper alloy with capstan heads, chromium plated, screwed down, high pressure with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed.

Supply and fix in repair 15mm bore fancy type, chromium plated, bib tap, cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified and directed.

Supply and fix in repair 15mm bore brass angle cock fancy type, chromium plated for iron pipe complete all as specified and directed.

Supply and fix in repair soap dish, brass chromium plated of approximate size 100x80 mm complete all as specified and directed.

Supply fix in repair 32mm dia CP waste coupling complete all as specified and directed.

Supply and fix in repair brass chromium plated shower rose 125mm size with or without swivel joint complete all as specified and directed.

Supply and fix in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

Supply and fix in repair 125mm dia stainless steel grating doom with waste hole complete all as specified and directed.

Supply and fix in repair vitreous china squatting pan of ‘Orissa pattern’, size 580 mm x 440mm (white) with ‘P’ or ‘S’ trap, front or back inlet and foot rests, any pattern complete including provision of PCC (1:4:8) type-D2 (using 20mm graded stone aggregate) bedding and connection to trap, flushing pipe, antisyphonage pipe, etc. including making good the disturbed floor complete all as specified and directed.

Supply and fix MS tank cover with zinc coating, 500mm dia and 150mm height of spherical shape and gas welded spikes of 2mm dia and 75mm long at 50mm centre to centre of all surface in zig zag pattern and fixed with 50mm long medium weight MS butt hinges locked with 100 mm long hasp and staples fixed on existing PVC over head tank of any size complete all as specified and directed.

Supply, hoist and fix 500 litre capacity rotational moulded polyethylene water storage tanks three layered bearing ISI mark (cylindrical vertical with closed top) including 20mm dia ball valve high pressure high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gm) after dismantling of old existing tank complete all as specified and directed.

Supply and fix in repair 20mm dia ball valve high pressure high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gm) complete all as specified and directed.

Supply and fix in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

Supply and fix in repair stainless steel plate rack 0.85mm thick of size 1050x600x250mm complete all as specified and directed.

Supply and fix in repair triple door corner cabinet with PP and PPCP material of size 848x343x250mm fixed on wall complete all as specified and directed.

Supply and fix in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm, bowl size 410mm x 330mm x 160mm complete all as specified and directed.

Supply and fix in repair vitreous china white wash down water closet pan (pedestal pattern) with ‘P’ or ‘S’ trap, front or back inlet, fixing bolts and making all necessary connections complete as specified and directed.

Supply and fix in repair plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

Supply and fix in repair 10 ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe complete all as specified and directed.

Supply and fix in repair vitreous china wash hand basin, white, flat back, size 550x400mm excluding taps, waste pipe, chain & plug and porcelain stopper but with brackets and 32 mm bore waste coupling PTMT (minimum weight 45gms) including cutting for and pinning in ends of brackets complete all as specified and directed.

Supply and fix in repair 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints etc fixed to walls or laid in trenches complete all as specified and directed.

All as per item No 76.00 here in before but 75mm bore and -ditto-.

Supply fix in repair 32mm dia PVC waste pipe 800mm long complete all as specified and directed.

Supply and fix in repair PVC connection pipe 15 mm size with PTMT nuts at both ends of length 600 mm complete all as specified and directed.

Supply and fix in repair 110 mm bore PVC (SWR) junction single, (single T) equal or unequal with access door complete all as specified and as directed.

Supply and fix in repair 110 mm bore PVC (SWR) bends any radius with access door complete all as specified and as directed.

Supply and fix in repair 75 mm bore PVC (SWR) bends any radius with access door complete all as specified and as directed.

SARKAR AND COM