UDP-88(2024-25) Bachat Grant

Name of Work : Construction & Renovation of Chief Officer and O.S office for Deesa Nagar Palika,

Deesa. Dist.Banaskantha. UDP-88(2024-25) Bachat Grant

Description Quantity Rate Per Amount

Demolition of Brick work and stone masonry including stacking

of serviceable materilas and disposal of unserviceable

materials with all lead and lift.(ii) In Cement Mortar.

Dismentaling tiled of stone floors laid in mortar including

2 stacking of serviceable materilas and disposal of 128.20 49.12 Sqm

unserviceable materials with all lead and lift.

Dismentaling of sheet roofing including ridges, Hips, Valleys,

Gutters etc. stacking of serviceable materilas and disposal of

unserviceable materials with all lead and lift.(ii) A.C. sheet

Dismentling expanded metal or I.R.C Fabric with necessary

4 battens and beadings including frame work, and stacking the 8.75 57.13 Sqm

serviceable materials with all lead and lift.

Brick work using common burnt clay building bricks having

crushing strength not less than 35 kg./Sq.Cm. in foundation

5 and plinth in Cement Mortar 1:5. (1- Cement : 5 -fine 9.87 4287.52 Cmt

sand)Upto two floor level(B) Conventional

Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or half brick walls for interior plastering

upto floor two level and finished even and smooth in (i)

Cement mortar 1:3 (1-cement:3-sand)

Applying two coats of putty & two coats of primer of approved

brand and manufacture on new wall surface to give an even

7 shade including thoroughly brushing the surface free from 229.89 40.59 Sqm

mortar dropping and other foreign matter and sand papered

Wall painting (two coats) with plastic emulsion paint of

approved brand and manufacture on undecorated wall surface

8 to give an even shade including throughly brushingthe surface 451.06 83.18 Sqm

free from mortar droppings and other foreign matter and sand

papered smooth.

Providing and fixing standared extruded of alluminium section

of size 63.50 x 38.10 x 1.95 mm,@ Wt 1.094Kg / Rmt with

9 colour Powder Coated alluminium frame with 5 mm thick 41.83 1833.29 Sqm

transparent bronze colour tinted float glass as details etc

Description Quantity Rate Per Amount

Providing and fixing eco-friendly light weight calcium silicate

false ceiling tiles having Tegular edge & 15 mm Thick

Densified edges on the Tile Periphery for Extra Strength The

Light weight calcium silicate ceiling tiles shall have , light

reflection 85% non-combustible as per B.S. 476 part IV, 100%

humidity resistance and also having thermal conductivity0.043°

w/m KC.for the best thermal Insulation . The Light weight

calcium Silicate tile shall be of approved texture Fine fissured/

Spintone/Cosmos having NRC value of 0.5 & Globe having

NRC value of 0.75 NRC or equivalent of size 595 X 595 mm to

be laid on true horizontal level suspended inter locking metal

grid of hot dipped galvanized steel sections (galvanizing @120

grams per sqm including both side) consisting of main ‘T’

runner suitably spaced at joints to get required length and size

of 24X38mm made from 0.30 mm thick (minimum) sheet,

1200mm centre to centre, and cross ‘T’ of size 24X28mm

made out of 0.33mm (Minimum) sheet spaced 1200mm along

spaced between main ‘T’ at 600mm centre to centre to form

agrid of 1200X600mm and secondary cross ’T’ of length

600mm and size 24x28mm made of 0.30 mm thick (Minimum)

sheet to be interlocked at middle of the 1200X600mm panel to

form grid of size 600X600mm resting on periphery

walls/partitions on a perimeter wall angle pre-coated steel of

size (24X24X3000mm made of 0.40mm thick (minimum) sheet

with the help of rawl plugs at 450mm centre to centre with

25mm long dry wall screws @ 230mm interval and laying

15mm thick Densified edges light weight calcium silicate

ceiling tiles of approved texture (Fine

Fissured/Cosmos/Spintone) in the grid including, cutting

/making opening for services like diffusers, grills, light fittings,

fixtures, smoke detectors etc., wherever required, Main ‘T’

runners to be suspended from ceiling using G.I. slotted cleats

Providing and fixing L-Shape Executive Tables, with table top

made of 25 mm thick particle board, finished with approved

quality decorative laminate on top surface only, including PVC

edge banding on all exposed edges, complete. The table top

shall be supported on engineered wood gable-type

understructure made of particle board, laminated on both

sides, finished in approved colour, complete with non-

detachable modesty panel made of particle board, laminated

on both sides, fixed rigidly to the understructure, complete.

Providing and fixing right-aligned extended return unit (ERU)

11 made of particle board, laminated on both top and bottom 1.00 24000.00 Nos

surfaces, with gable end, comprising storage unit with two

shelves, one closed compartment and three drawers, complete

with all necessary hardware, fittings and accessories. The

overall height of the worktop shall be 750 mm (±20 mm). The

work shall include all materials, labour, fabrication,

transportation, fixing, levelling and finishing, complete as per

approved drawings, specifications and directions of the

Engineer-in-Charge. Warranty: Minimum 12 months.(Main

Desk 2'6" x 10' and Extended unit 1'6" x 4')

Description Quantity Rate Per Amount

Providing and fixing L-Shape Executive Tables, with table top

made of 25 mm thick particle board, finished with approved

quality decorative laminate on top surface only, including PVC

edge banding on all exposed edges, complete. The table top

shall be supported on engineered wood gable-type

understructure made of particle board, laminated on both

sides, finished in approved colour, complete with non-

detachable modesty panel made of particle board, laminated

on both sides, fixed rigidly to the understructure, complete.

Providing and fixing right-aligned extended return unit (ERU)

12 made of particle board, laminated on both top and bottom 1.00 13000.00 Nos

surfaces, with gable end, comprising storage unit with two

shelves, one closed compartment and three drawers, complete

with all necessary hardware, fittings and accessories. The

overall height of the worktop shall be 750 mm (±20 mm). The

work shall include all materials, labour, fabrication,

transportation, fixing, levelling and finishing, complete as per

approved drawings, specifications and directions of the

Engineer-in-Charge. Warranty: Minimum 12 months.(Main

Desk 2' x 6' and Extended unit 1'3" x 3'3" ft.)

Providing, supplying, and placing Wooden Center Table,

rectangular in shape, made from engineered wood frame with

table top of engineered wood / glass / rose wood, finished in

Sheesham colour. The table shall be of approved design and

dimensions, with proper joinery, smooth edges, and superior

surface finish. The construction shall be sturdy and capable of

bearing a minimum load of 45.36 kg.

Providing, supplying, and installing table desk made of particle

board with laminate finish on both sides, having rectangular

table top and engineered wood gable-type understructure. The

desk shall include a solid laminated modesty panel, finished in

brown colour, complete with all fittings, accessories, and

installation, with 12 months standard warranty, as approved by

the Engineer-in-Charge.

OS Office Desk table (2'3" x 6' Ft)

Providing, supplying, and installing wooden conference table

of approved design and finish, made from engineered

wood/particle board with high-quality laminate finish on both

sides. The table shall have a sturdy engineered wood

understructure, smooth edges with proper edge banding, and

15 durable surface suitable for conference and meeting use. The 1.00 25000.00 Nos.

item shall include all materials, fittings, accessories,

transportation, and installation at site, complete in all respects,

as per specifications and to the satisfaction of the Engineer-in-

Conference Table (10' x 5' Ft.)

Providing, supplying, and placing revolving executive chair with

pneumatic height adjustment, centre tilt with locking, and

caster wheels, having leatherette upholstered cushioned seat

16 and high-back backrest with lumbar support, fixed padded 3.00 14000.00 Nos

armrests, complete with all accessories and minimum 3-year

warranty, as approved by the Engineer-in-Charge.

Providing, supplying, and placing revolving office chair with

hydraulic height adjustment, centre tilt mechanism, and caster

wheels, having mesh-upholstered cushioned seat and low-

back backrest, with fixed armrests, complete with all fittings

and accessories, and minimum 1-year warranty, as approved

by the Engineer-in-Charge.

Description Quantity Rate Per Amount

Providing, supplying, and installing 6-seater sectional fabric

sofa of approved design and finish, made with solid wood

primary frame, high-density foam cushioning, and fabric

upholstery in grey colour. The sofa shall be sturdy,

comfortable, and suitable for residential and commercial use,

18 with adequate seating capacity and load-bearing strength.The 1.00 45000.00 Nos

item shall include all components, fittings, accessories, DIY

assembly, transportation, and placement at site, complete in all

respects, with a minimum 3-year limited domestic warranty, as

per specifications and to the satisfaction of the Engineer-in-

Providing, supplying, and installing 43-inch QLED 4K Ultra HD

Smart LED Television with 50 Hz refresh rate, AI processor,

HDR support, and smart TV features. The TV shall include

HDMI, USB, Wi-Fi, Bluetooth, Ethernet connectivity, minimum

20 W sound output, and be supplied with remote, stand, power

cord, and accessories, complete with manufacturer’s warranty,

as approved by the Engineer-in-Charge.Brand:- Sony or

Providing, supplying, and installing 55-inch QLED 4K Ultra HD

Smart LED Television with 50 Hz refresh rate, AI processor,

HDR support, and advanced smart TV features. The unit shall

include HDMI, USB, Wi-Fi, Bluetooth, and Ethernet

connectivity, minimum 20 W audio output, and be supplied with

remote, stand, power cord, and accessories, complete with

manufacturer’s warranty, as approved by the Engineer-in-

Charge. Brand:- Sony or Samsung

Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24''

in looring treads of steps and landing laid on a bed of 12mm

thick cement mortar 1:3 (1-cement : 3-coarse sand ) finishing

with flush pointing in white cement.

Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24''

in skerting risers of steps and dedo on 10mm thick cement

plaster 1:3 (1-cement : 3-coarse sand) and jointed with white

Description Quantity Rate Per Amount

Supply & Fixing of Roller Blinds of approved by architect / EIC

having the DRIVE UNIT shall be of moulded plastic with steel

spring support and inserted into the tube end. It shall be driven

by a ball chain pulley with ball chain and can be positioned at

right side or left hand side of the Shade. The Shade when

lowering or raising, shall be automatically locked in position

upon release of the ball chain by means of a built in friction

lock. The END PLUG shall be moulded of plastic with a steel

location pin. The plug shall be inserted into the tube end.

(Opposite to the Drive Unit).The SUPPORT BRACKETS shall

be of coated steel & provided with covers and used in right

hand or left hand positions differentiated by the acceptance of

the of the rectangular drive unit support or the round idler plug

pin.The ROLLER TUBE shall be of extruded aluminum with

38mm internal diameter & skin thickness of 1mm and shall

incorporate a keyway integral with the tube to accommodate

the spline. The outside diameter of the roller tube shall be

40mm.The BOTTOM RAIL shall be a stiffening element

inserted into a bottom rod pocket. The material may be timber,

PVC covered steel tube or VB Bottomrail.The BALLCHAIN

shall be 2mm diameter cord with 4.5mm diameter acetal balls

moulded co-axially to it on 6mm pitch to form an endless

ballchain. It is used for raising or lowering action of the shades.

The FABRIC will be 100% PVC free with no Volatile Organic

Compounds recommended , having no bacterial / fungal

emission and satisfying NFPA fire safety standard , shall be as

per selection from the Hunter Douglas range and shall be

sized according to site requirement (subject to maximum width

limitation of individual fabric types). A bottom pocket shall be

created in the fabric to incorporate the bottom rail.

Point wiring for Light / Fan/ Bell/ Primary Point with 2-1.5 sq.

mm & earth wire of 1.5 sq. mm (green) both are of ISI marked

1.1 kv grade FRLS PVC insulated multi strand copper wires

upto max length of 10 mt, in below type of pipe erected with

6A Tissino Type ISI marked flush type switch / bell push and

24 accessories erected on Metal / PVC/Wooden Box covered 43.00 351.00 Pts.

with 3 mm thick PC(Polycarbonate) /Acrylic/Laminated sheet.

with necessary Lamp holder/ceiling rose / H.D.Connector as

directed. (a) with medium class Rigid PVC pipe and

accessories erected flushed on wall/ceiling complete

Supplying and erecting LED indoor fittings with LEDs of

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA/aluminium pressure die cast

powder coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with company

mark/name 160V to 270V,Power Factor more than 0.95, THD

< 15 %, CCT 3000 K to 6500K, Luminaire efficacy>

25 lumens/watt , LED driver efficiency > 85 % ( fitting required LM- 43.00 584.00 Nos

79 & LM-80 Certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity between

the ranges shown.) (A) Square/ Circular shaped

Surface/Recessed Mount Downlight with provision for spring

loaded mounting clips complete.IP20 (iii) 16-20 watts, Cat-III

Description Quantity Rate Per Amount

Providing & erecting Approved make Ceiling Fan with double

ball bearing ISI mark with Condenser 230 volt A.C.50 Hz.

mm sweep complete having 4 blades Aluminium body and

blade sets having ornamental design shanks, canopy erected

with earthing [ Make shall be approved by Engineer in Charge]

Providing and fixing wsh down water closet (European type,

W.C. Pan) with integral P or S trap including jointing the trap

27 with soil pipe in Cement Mortar 1:1 (1-Cement : 1-fine sand) 1.00 1343.38 Nos

(Seal and cover to be measured and paid for separately)(A)

vitreous China Pattern :(i) in white colour

Providing and fixing 12.5 Litres low level flushing cistern with a

pair, of C.I. or Mild brackets, complete with fittings such as

lead valve less syphon, 15mm nom.nal size brass ball valve

with polythene float, C.P brass handle unions and couplings

for connections, with inlet, outlet and overflow pipes, 40mm

dia. porcelain enamelled flush bend ncluding cutting holes in

walls and making good the same connecting the flush bend

with cistern and closet (overflow pipe to be measured and paid

for separately)(A) itreous China (I) In white colour

Providing and fixing cast iron (Spun) Nahni trap of the

following nominal diameter of self cleaning design with C.I.

29 screaed down or higned grating including cost of cutting and 1.00 640.10 Nos

making good the walls and floor 100mm inlet and 50mm

outlet.(C) 100mm dia.

Providing and fixing washbasin with single hole for pillar tap

with C.I. or M.S. brackets painted white including sutting holes

30 and making good the same but excluding fittings.(A) Vitreous 1.00 1511.53 Nos

China:(ii) Flat Back washbasin 550 mm x v 400mm size. (i) In

Providing and fixing to wall ceiling and floor 6.0 Kg. F/Cm2

working pressure poluthene pipes of the following outside Dia.

31 Low densidy, complete with special falnge ompression type 25.00 106.34 Rmt

fittings, wall clipsetc. including making good the wall ceiling

and floor.(B) 25mm

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2

working pressure polythene pipes of the following outside Dia.

32 Low densidy, complete with special falnge compression type 10.00 277.46 Rmt

fittings, wall clipsetc. including making good the wall ceiling

and floor.(F) 75mm

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2

working pressure poluthene pipes of the following outside Dia.

33 Low densidy, complete with special falnge compression type 10.00 335.69 Rmt

fittings, wall clipsetc. including making good the wall ceiling

and floor.(G)110 mm

Providing and fixing 600mm x 450mm bevelled edge mirrror of

superior glass mounted on 6mm thick A.C. sheet or plywood

sheet and fixing to wooden pluge with C.P. brass screws and

Providing and fixing toilet paper holder.(A) C.P. Brass

Providing and fixing screw down bib taps of following size.(A)

36 Brass screw down bib tap polished bright. (ii) 20mm dia. 2.00 212.68 Nos.

Providing and fixing pillar tap, capstan head, screw down high

37 pressure with screws, shanks and back nuts. (ii) 20mm dia. 1.00 351.18 Nos.

Providing and fixing chromium plated brass half trun flush cock

38 of approved quality including fixing in pipe line etc. 3.00 261.16 Nos.

complete.(ii) 25mm dia.

Providing and fixing C.P. brass shower rose with 15mm or

20mm inlet.(A) 100mm dia. Each

Description Quantity Rate Per Amount

Providing and laying Granite stone slab flooring over 18mm

(average)base of cement mortar 1:6 (1-cement : 6 coarse

sand) or L.M. 1:1.5(1- lime putty : 1.5 - coarse sand) laid and

jointed with gray cement slurry including rubbing and polishing

complete.Labour Charges half round edge for Granite

41 Labour Charges half round edge for Granite 55.00 85.85 Rmt

Total Amount Rs.

Total Amount Rs.