Tripura

Active

Works

Civil Works

Installation of 05 (five) nos. Mini Deep tube well with submersible Pump and 15 (fifteen) nos. hand Pump in different plaecs under Ward No-37, AMC

Mayor- Agartala Municipal Corporation

Under AMC | West Tripura, Tripura

Amount: ₹12.9 LCloses: 13 Oct 20265d left

Timeline

Published7 Oct 2026
Closes13 Oct 2026
Bid Opening13 Oct 2026

Tender Value

₹12.9 L

EMD Value

₹25,880

Closing Date

13 Oct 2026, 3:00 pm5d left

Tender Inviting Organisation

Name

O/O the Executive Engineer, DWS Division, AMC.

Address

The Executive Engineer, DWS Division, AMC.

Work Description

Installation of 05 (five) nos. Mini Deep tube well with submersible Pump and 15 (fifteen) nos. hand Pump in different plaecs under Ward No-37, AMC

Tender Information

Tender ID

2026_SAMC_77705_1

Reference Number

14/EE/DWS/AMC/2026-27

Tender Type

Open Tender

Product Category

Civil Works

Form of Contract

Percentage

Location

Under AMC

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

6 documents required · 6 mandatory

Fee/PreQual/Technical/Finance

RequiredAPPENDIX-I (.pdf)

RequiredAPPENDIX-II (.pdf)

RequiredAPPENDIX-III (.pdf)

RequiredAPPENDIX-IV (.pdf)

RequiredAPPENDIX-V (.pdf)

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹1,000

Tender Fee Exemption Allowed

Yes

EMD Fee Amount

₹25,880

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

7 Oct 2026

Published

7 Oct 2026

Bid Opening

13 Oct 2026

Download Starts

7 Oct 2026

Download Ends

13 Oct 2026

Submission Starts

7 Oct 2026

Bill of Quantities

PercentageBoQ_Ver3.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (14 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1	Drilling and boring of pilot hole in any strata by manual means, collection of soil sampales of different strata met with during drilling at various suitable levels and preservation of samples in plythene bags / sample boxes and disposal of excess soil or mud including the cost for water etc. as required to maintain the pilot hole properly as per specification and direction of the Engineer In Charge. (A) 100 mm dia.	300	mtr	567	₹1,70,100
2	Reaming of pilot hole to an enlarged bore hole in any soil starta by manual means, disposal of excess soil or mud, including the cost for water etc. as required to maintain the bore hole properly as per specification and direction of the Engineer-in-charge, A) From 100 mm dia pilot hole to 250 mm bore hole	300	mtr	537.9	₹1,61,370
3	Providing and fixing of UPVC end cap suitable for UPVC'CM" casing or 'CS' casing or 'RS' pipes as per specification and direction ofhte Engineer-in-charge, i) 100 mm dia	5	nos	560.4	₹2,802
4	Providing & lowering of UPVC pipe as per IS:12818 after washing of the bore hole by manual means as per specification and direction of the Engineer-n-charge. A)'CM'casing pipe,i) 150 mm dia	100	mtr	1,324	₹1,32,400
5	Providing & lowering of UPVC pipe as per IS:12818 after washing of the bore hole by manual means as per specification and direction of the Engineer-n-charge. A)'CM'casing pipe,ii) 100 mm dia	100	mtr	612.8	₹61,280
6	Providing & lowering of UPVC pipe as per IS:12818 after washing of the bore hole by manual means as per specification and direction of the Engineer-n-charge. B) RS pipe i) 100 mm dia	100	mtr	942.3	₹94,230
7	Providing and fixing of UPVC reducer suitable for UPVC 'CM' casing or 'CS' casing or 'RS' pipes as per specification and direction of the Engineer-in-charge, ii) 150x100 mm dia	5	nos	1,082.6	₹5,413
8	Washing and development of tube well by using hand pump or by any suitable method and testing of the well as per specification and direction of the Engineer-in-charge.	300	mtr	94.1	₹28,230
9	Providing and shrouding of the deep tube well assembly with washed pea gravels (2.0-4.75) mm effective size) as per specifiation (IS:4097) using deep drilling rig and direction of the Engineer-in-charge, A) with contracor's high power rig i0with pea gravels obtained from Durgapur, West Bengal.	4.73	Cum	15,570.6	₹73,571.08
10	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement trenching, refilling & testing of joints complete as per direction of Engineer in Charge.40 mm nominal outer dia .Pipes	150	mtr	634	₹95,100

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.56 MB

Work Item Documents

DNIeT14.pdf

Tender Documents • 3.72 MB

BOQ_79096.xls

BOQ • 0.32 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

Drilling and boring of pilot hole in any strata by manual means, collection of soil sampales of different strata met with during drilling at various suitable levels and preservation of samples in plythene bags / sample boxes and disposal of excess soil or mud including the cost for water etc. as required to maintain the pilot hole properly as per specification and direction of the Engineer In Charge. (A) 100 mm dia.

300

mtr

567

₹1,70,100

Reaming of pilot hole to an enlarged bore hole in any soil starta by manual means, disposal of excess soil or mud, including the cost for water etc. as required to maintain the bore hole properly as per specification and direction of the Engineer-in-charge, A) From 100 mm dia pilot hole to 250 mm bore hole

300

mtr

537.9

₹1,61,370

Providing and fixing of UPVC end cap suitable for UPVC'CM" casing or 'CS' casing or 'RS' pipes as per specification and direction ofhte Engineer-in-charge, i) 100 mm dia

nos

560.4

₹2,802

Providing & lowering of UPVC pipe as per IS:12818 after washing of the bore hole by manual means as per specification and direction of the Engineer-n-charge. A)'CM'casing pipe,i) 150 mm dia

100

mtr

1,324

₹1,32,400

Providing & lowering of UPVC pipe as per IS:12818 after washing of the bore hole by manual means as per specification and direction of the Engineer-n-charge. A)'CM'casing pipe,ii) 100 mm dia

100

mtr

612.8

₹61,280

Providing & lowering of UPVC pipe as per IS:12818 after washing of the bore hole by manual means as per specification and direction of the Engineer-n-charge. B) RS pipe i) 100 mm dia

100

mtr

942.3

₹94,230

Providing and fixing of UPVC reducer suitable for UPVC 'CM' casing or 'CS' casing or 'RS' pipes as per specification and direction of the Engineer-in-charge, ii) 150x100 mm dia

nos

1,082.6

₹5,413

Washing and development of tube well by using hand pump or by any suitable method and testing of the well as per specification and direction of the Engineer-in-charge.

300

mtr

94.1

₹28,230

Providing and shrouding of the deep tube well assembly with washed pea gravels (2.0-4.75) mm effective size) as per specifiation (IS:4097) using deep drilling rig and direction of the Engineer-in-charge, A) with contracor's high power rig i0with pea gravels obtained from Durgapur, West Bengal.

4.73

Cum

15,570.6

₹73,571.08

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement trenching, refilling & testing of joints complete as per direction of Engineer in Charge.40 mm nominal outer dia .Pipes

150

mtr

634

₹95,100