C/O Additional Alteration to the Civil Hospital building Nurpur

Amount

Demolition of brick work in cement mortar above ground level upto all floor level including stacking of serviceable materials and disposal of unserviceable materials within all leads including carriage of materials within all leads and lifts and other incidental charges. The rate inclusive of Royalty , Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.

Dismantling doors, windows and clerestory windows, ventilators etcetera . (wood or steel) shutters including chowkhats, architraves, hold fasts and other attachments etcetera complete and stacking them within all leads and lifts and other incidential. The rate inclusive of Royalty , Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.

Dismantling tiled floors of any thickness laid in mortar up to floor all level including stacking of serviceable materials and disposal of un-serviceable materials up to any leads including carriage of materials within all leads and lifts and other incidental. The rate inclusive of Royalty , Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.

Excavation in foundation, trenches etcetera in earth work in all kind of classification of soil such as pick work, jumper work, pick jumper work. jumper blasting work , soft and hard blasting and doing work in saturated soil conditions unto any depth and lift including chiseling or wedging out rock where blasting work is prohibited or any other mixed variety of soil including shoring, strutting dewatering and pumping or bailing out water ( surface and sub soil water ) upto any depth or any quantum of water including slush which may arise during dewatering, removal of slush and stacking the serviceable and unserviceable material clear from the edges of excavation as directed by the Engineer-in-charge and then returning the stacked soil in 15 cm ( fifteen centimeters ) layers when required into plinths and sides of foundation etcetera consolidating each deposited layer by ramming, watering and then disposing of all surplus unserviceable excavated earth as directed within all leads and lifts disposed earth to be neatly dressed and leveled as directed by the Engineer-in Charge including carriage of materials within all leads and lifts and other incidental charges. The rate inclusive of Royalty , Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.

Excavation in drains and channels etcetera in all kinds of classification of soil such as pick work, jumper work, pick jumper work, blasting work , hard blasting or any other mixed classification of soil including chiseling or wedging out rocks where blasting is prohibited and doing work in saturated soil including cost f shoring, strutting, and pumping or bailing out water ( surface and sub soil water ) upto any depth and quantum of water including clearing of slush which may arise out during dewatering, including dressing of sides and bed and disposing of all excavated earth upto any leads and lifts. Disposed earth to be levelled and neatly dressed as directed by the Engineer-in-charge including carriage of materials within all leads and lifts and other incidental charges. The rate inclusive of Royalty , Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.

Providing and laying cement concrete 1:4:8 (one cement; four sand : eight graded /crushed stone aggregate 40mm(forty millimeters) nominal size mixed and vibrated mechanically and curing complete excluding the cost of form work in foundation and plinth in all depths including carriage of materials within all leads and lifts and other incidental charges. The rate inclusive of Royalty , Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm(three point one five millimeters) thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling upto any height and removal of the same for in situ reinforced concrete and plain concrete work in Beams, cantilevers, girders and lintels sides and soffits of beams, beam haunching, cantilevers, girders, bressumers and lintels upto any heights / thickness /depths etcetera upto all floor level including carriage of materials within all leads and lifts. The rate inclusive of Royalty Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm(three point one five millimeters)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling upto any height and removal of the same for in situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors, roofs, landings , shelves and the like floor etcetera upto any thickness upto all floor level including carriage of materials within all leads and lifts. The rate inclusive of Royalty , Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete of grade M-20(M-twenty) mix designed to obtain the minimum compressive strength of 20 N/mm² (twenty newton per square milimeters) with cement contents not less than 320 kg (three hundred twenty kilogramme) per cubic meter and curing complete excluding cost of form work and reinforcement for reinforced concrete work in foundation, footings, bases of columns and the like and mass concrete upto all floor level including carriage of materials within all leads and lifts other incidental charges as per approved drawings , design, and as directed by Engineer in charge. The rate inclusive of Royalty , Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete of grade M-20(M-twenty) mix designed to obtain the minimum compressive strength of 20 N/mm² (twenty newton per square milimeters) with cement contents not less than 320 kg (three hundred twenty kilogramme) per cubic and curing complete excluding cost of form work and reinforcement for reinforced concrete work in suspended floors, roofs, landings, shelves and their supports balconies, beams, girders, bressumers and cantilevers in all depths/ thickness etcetera up to all floor level including carriage of materials within all leads and lifts other incidental charges as per approved drawings , design, and as directed by Engineer in charge. The rate inclusive of Royalty , Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.

Providing and laying mild/ tor steel reinforcement for reinforced cement concrete work including bending, binding and placing in position complete in all heights including cost of binding wire for all floors including carriage of materials within all leads and lifts and other incidentials. The rate inclusive of Royalty Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.

Providing and laying damp proof course 100mm ( one hundred millimeters ) thick with cement concrete 1:2: 4 (one cement; two sand four graded /crushed stone aggregate 12.5mm (twenty point five millimeter) nominal size and curing complete including cost of form work including carriage of materials within all leads and lifts and other incidental charges as per approved drawings , design, and as directed by Engineer in charge. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.

Applying a coat of hot bitumen (mexphalt 80/100 ( eighty/ one hundred ) or equivalent) using 1.70 Kg(one point seven zero Kilogramme ). per square meter on damp proof course after cleaning the surface with a piece of cloth lightly socked in kerosene oil complete including carriage of materials with in all leads and lifts and other incidential as per approved drawings , design, and as directed by Engineer in charge. The rate inclusive of Royalty , Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.

Brick masonry using second class common burnt clay building bricks in super structure above plinth level in all heights / floor level in cement mortar 1;6( one cement; six sand)and curing complete including carriage of materials within all leads and lifts and other incidental charges. The rate inclusive of Royalty , Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.

Half brick masonry using second class common burnt clay building bricks in super structures above plinth level upto all floor level in cement mortar 1: 4( one cement; four sand)and curing complete including carriage of materials within all leads and lifts and other incidental charges. The rate inclusive of Royalty , Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.

Providing and fixing coloured anodized aluminium frames for door, window, ventilators and partitions with aluminium extrusion sections (No 14081) 127X44.45X3.00mm ( one hundred twenty seven into fourty four point four five into three millimeters ) of Jindal / Hindalco aluminium or its equivalent as per approved shade with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285 anodized transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawl plugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene felt etcetera aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically where ever required including cleat angle, aluminium, snap beading for glazing/ panelling C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-In-Charge. complete including carriage of materials within all leads and lifts and other incidental charges. The rate inclusive of Royalty , Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.

Providing and fixing coloured anodized aluminum shutters for door, window, ventilators and partitions with aluminium extrusion section ( No. 4524 and 4526 ) 101X44.45X3.00mm ( one hundred one into fourty four point four five into three millimeters ) of Jindal / Hindalco aluminium or its equivalent as per approved shade with extruded built standard tubular and other sections of approved make conforming to IS 733 and IS 1285 anodized transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawl plugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etcetera . Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleat angle, aluminium, snap beading for glazing /paneling C.P. brass/ stainless steel screws. All complete as per architectural drawings and the directions of Engineer-In-Charge. For shutters of doors Styles of main door top rail and side style no 19509 size 85.00x44.45x3.00mm ( eighty five into forty four point four five into three millimeter ) lock and bottom rail No. 19596 size 150.00x44.45x3.00mm ( one hundred fifty into forty four point four five into three millimeter ) meeting style no 19518 size 53.70x44.45x3.00mm ( fifty three point seven zero into forty four point forty five into three millimeter )Glazing plate and channel no 19353 size 44.45x5.72x3.00mm. ( forty four point four five into five point seven two into three millimeter )Styles of internal Door Top rail and side style no 19508 size 83.50x44.45x3.00mm ( eighty three point five zero into forty four point four five into three millimeter ) lock and bottom rail No 19596 size 150.00 x44.45x3.00mm ( one hundred fifty into forty four point four five into three millimeter ) meeting style no 19509 size 85.00x44.45x3.00mm . ( eighty five into forty four point four five into three millimeter ) Styles of window and vents style no 19508 size 83.50x44.45x3.00mm ( eighty three point five zero into forty four point four five into three millimeter ) channel and rebate no 19649 size 38.10x12.00x2.50mm ( thirty point ten into twelve into two point five millimeter ) Shash bar no 20006 size44.45x25x2.40mm ( forty four point four five into twenty five into two point four millimeter ) Bead no19377 of Jindal / Hindalco including providing and fixing hinges/pivots and making provisions for fixing of fittings where ever required including the cost of PVC/ neoprene gaskets as required (fittings and glazing/panelling shall be paid for separately). The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.

Providing and fixing aluminium 8mm (eight millimeter ) thick aluminium grill anodized powder coated pattern to existing window /ventilator with 80mmx80mm ( eighty millimeters into eighty millimeter ) panels holes with 25x8mm ( twenty five into eight millimeter ) thick aluminium flat in windows and ventilators including fixing with aluminum screws or bolts and nuts complete in aluminum channels base frames (Aluminium channels base frames to be measured and paid for separately) complete including carriage of materials within all leads and lifts and other incidental charges. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.

Providing and fixing angle iron cupboards frames manufactured from Mild steel angle iron section 25x25x5mm ( twenty five into twenty five into five millimeters ) thick including hinges jamb, lock jamb, bead and if required angle thrashold of mild steel angles 25x25mm ( twenty five into twenty five millimeters ) welded or rigidly fixed by mechanical means, lugs with split end tails to each jamb including steel but hinges 2.5mm ( two point five millimeters ) thick with provision for locking arrangement and shock observers as specified and applying a coat of approved steel primer after pretreatment of the surfaces as directed by the Engineer-in-charges complete including carriage of materials within all leads and lifts. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.

Providing and Fixing 12 mm ( twelve millimeter ) thick prelaminated board both side water proof bwp phenol bonded exterior/interior grade particle board in Matt Finish ISI Marked IS No 12823 of Action Tesa / Kitlam / Greenlam / Merinolam / Vista as per approved shade both sides. complete including carriage of materials within all leads and lifts and other incidental charges. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government

Providing and fixing to existing door frames, 30mm (thirty millimeters ) thick factory made PVC panelled door shutter consisting of frame made out of M.S. tubes of 19 (nineteen ) gauge thickness and size of 19mm x19mm ( ninety millimeters into nineteen millimeters ) for styles and 15mmx15mm ( fifteen millimeters into fifteen millimeters ) for top & bottom rails, ( Code no 9.120 ) of Rajshri M.S. frame shall have a coat of steel primers of approved make and manufacture M.S. frame covered with 5mm ( five millimter ) thick heat moulded PVC "C" channel of size 30mm (thirty millimeters ) thickness, 70mm ( seventy millimeters ) width out of which 50mm ( fifty millimeters ) shall be flat and 20mm ( twenty millimeters ) shall be tappred in 45 (forty five ) degree angle on either side forming style and 5mm ( five millimeter ) thick, 95mm ( ninety five millimeters ) wide, PVC sheet out of which 75mm ( seventy five millimeters ) shall be flat and 20mm ( twenty millimeters ) shall be tapered in 45 (forty five ) degree on the inner side to form top and bottom rail and 115mm ( one hundred fifteen millimeters ) wide PVC sheet out of which 75mm ( seventy five millimeters ) shall be flat and 20mm ( twenty millimeters ) shall be tapered on both side to form lock rail, top, bottom and lock rail shall be provided either side of the panel 10mm (ten millimeters ) thick, 20mm ( twenty millimeters ) wide cross PVC sheet be provided as gap insert for top rail and bottom rail paneling of 5mm ( five millimeters ) thick both side PVC Sheet to be fitted in the M.S. frame welded/sealed to the style & rails, joints mitred and jointed with solvent cement adhesive including fixing of PVC shutter with existing frame with M.S. butt hinges 100x50x1.90mm ( one hundred into fifty into one point nine millimeters ) size with necessary screws etcetera complete including carriage of materials within all leads and lifts and other incidental charges. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government

Providing and fixing Glazing with glass panes of 6mm ( six millimeter ) thickness of modi guard / Sanit gobain (weight not less than 13.75 kg/ sqm. ( thirteen point seven five kilogramme per square metre ) in aluminium door, windows, ventilators shutters and partitions etcetra with PVC / neoprene gasket etcetera complete as per architectural drawing and as per directions of Engineer in charge including carriage of materials within all leads and lifts and other incidental charges. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government

Providing and fixing glazing with glass panes of 4mm ( four millimeter ) thickness of modi guard / Sanit gobain (weight not less than 10.00 kg/sqm. ( ten kilogramme per square meter ) in aluminium door, windows, ventilators shutters and partitions etcetera with PVC / neoprene gasket etcetera in including carriage of materials within all leads and lifts and other incidental charges. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government

Providing and fixing 4 mm (four millimeter) thick frosted glass panes of modi guard / Sanit gobain with putty and nails including carriage of materials within all leads and lifts and other incidental charges. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government

Providing and fixing 25mm (Twenty five millimetres) thick water proof termite resistant commercial board Uniply / Greenply /Kit ply /Dura ply / Marino (ISI Marked ) board including 19 mm (nineteen millimeters ) thick shelves and shutter back side of the cup board shall be 8 mm( eight millimeters ) thick ply and all cut portions of shutter have 6mm /12 mm ( six millimeters / twelve millimeters ) thick hard wood edging .The shutter from out side shall be finished with 1mm (one millimeters ) thick lamination of Century / Greenlam / Action Tesa / Merinolam approved shade as per architectural drawings including fixing Top PTMT handles 125mm ( one hundred twenty five millimeters ) long shall be provided in wood colour with nickel plated piano hinges etcetera including fixing including carriage of materials within all leads and lifts and other incidental charges. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government

Providing and fixing brass curtain rail with rollers stop ends and brackets in pelmets instead of wooden curtain rod 25 mm ( twenty five millimeters) dia and brackets of first class deodar wood (actual length) of rails of be measured as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing magnetic catcher for cupboard shutters in all heights / floor level with necessary screws and butt hinges including carriage of materials within all leads and lifts. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government

Providing and fixing 65x35mm (Sixty five into thirty five milimetres) special quality bright finished brass cup board lock or ward robe lock with six levers including necessary screws etcetera complete in all respect ,including carriage of materials in all leads and lifts and other incidental. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government

Providing and fixing anodized aluminum sliding doors bolts,(anodized transparent or dyed to required colour and shade with bolts and nuts/screws etcetera complete including carriage of materials with in all leads and lifts. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government. 300 x 16mm (three hundred into sixteen)millimeter.

Providing and fixing anodized aluminum tower bolts, (Barrel type)anodized transparent or dyed to required colour and shade with bolts and nuts/screws etcetera complete including carriage of materials within all leads and lifts. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government. i) 200x10mm ( two hundred into ten millimeters ).

Providing and fixing anodized aluminum tower bolts, (Barrel type)anodized transparent or dyed to required colour and shade with bolts and nuts/screws etcetera complete including carriage of materials within all leads and lifts. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government :- i) 150x10mm ( one hundred fifty into ten millimeters ).

Providing and fixing aluminum handles anodized transparent or dyed to required colour and shade with necessary screws etcetera complete including carriage of materials within all leads and lifts. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government. i) 125mm (one hundred twenty five millimeters)

Providing and fixing aluminum handles anodized transparent or dyed to required colour and shade with necessary screws etcetera complete including carriage of materials within all leads and lifts. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government 100mm (one hundred millimeters)

Providing and fixing bright finished hard drawn hooks and eyes of approved colour and shade with necessary screws etcetera complete including carriage of materials within all leads and lifts. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government i) 250mm (two hundred fifty millimeters)

Providing and fixing Hydraulic door closer ISI marked with necessary screws complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government

Providing and fixing 100mm ( one hundred millimeters ) bright finished brass floor door stopper with rubber cushion screws etcetra to suit shutters thickness complete including carriage of materials with in all leads and lifts. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government

Providing and laying vitrified tile 10mm( ten millimeter ) thick full body matt finished anti skid water proof stain and impact resistant heavy duty vitrified tiles of Restile/ simpolo/ Orient- bell / AGL/ Johson Kajaria / Rak / Nitco make in size 600x600mm (six hundred into six hundred milimeters ) thick of approved shade and colour in floors treads of steps and landings laid over 12mm(twelve millimeter ) thick cement mortar 1:3 ( one cement; three sand ) jointed with neat cement slurry mixed with pigment to match the shade of tiles as required complete including carriage of material within all leads and lifts. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government

Providing and laying double charged vitrified tile 10mm( ten millimeter ) thick anti skid water proof stain and impact resistant heavy duty vitrified tiles of Kajaria / Rak / Nitco/ Orient/ Bell/ AGL/ Simpolo of size 600x600mm (six hundred into six hundred milimeters ) of approved shade and colour in floors treads of steps and landings on a bed of 12mm(twelve millimeter ) thick of cement mortar 1:3 ( one cement; three sand ) jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment to required shaped to match the shade of tiles complete including carriage of material within all leads and lifts. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government

Providing and laying aniti skid ceramic tiles 5.5mm ( five point five millimeter ) thick of premium quality of Kajaria/Rak/ Nitco / Somany/ Bell/ AGL or 300x300 ( three hundred into three hundred )size in flooring, treads of steps and landings on a bed of 12mm(twelve millimeter ) thick cement mortar 1:3 ( one cement; three sand ) finished with flush pointing in white cement complete including carriage of material within all leads and lifts. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government .

Providing and laying 19mm ( nineteen millimeters ) thick granite stone with semi round nosing in flooring over 20mm (twenty millimeters ) base of cement mortar 1:3(one cement: three sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including rubbing and polishing complete upto all floor level as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.

Providing and laying 300X450 mm ( three hunded into four hundred fifty millimetres ) size Ceremic Glazed tile of Kajaria/ Swastik / Somany / Bell / AGL with one border matching contrast at top in skirting risers of steps and dado on 12mm (twelve ) thick cement mortar 1:3 (1 cement : 3 sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete including carriage of materials within all leads and lifts. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government

Providing and laying cement water proofing treatment in depressed slab shall be done with Dr. FIXIT Pidilite water proof coating shall be done in two coats apply first of Dr.Fixit –FAST FLEX to the clean and situated surface maintaining a coverage of 6-7 sqft ( six dash seven square foot 0.60 sqm ( zero point six zero square meter ) per kilogramme to achieve 1mm ( one millimeters ) thickness. This coating shall also be extended upto 300 mm ( three hundred millimeters ) vertically. The second coat shall be applied in opposite direction after 4 to 6 ( four to six ) hours of application of first coat then sprinkle sand on top surface of applied Dr. FIXIT FAST FLEX while till tacky over floor with suitable gradient towards drain water pipe while the second coat of Dr. FIXIT is till tacky including apply cement mortar 1 : 4 ( one cement : four sand) and admixed with 200 ml ( two hundred milliliters ) of pidi proof LW @ 200 ml ( two hundred milliliter ) per 50 kg ( fifty kilogramme ) bag complete upto all floor level complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.

Providing and fixing ACP panel / Everest Fibre cement board ceiling / saint gobain Gyproc (Indian gypsum) MFT tile sand micro 600 x600 x15 mm ( six hundred into six hundred into fifteen millimeters ) square edge tiles (60%) (sixty percent) in combination with saint gobain gyproc (indian gypsum) Fulltone tile 600x600x12.5 mm ( six hundred into six hundred into twelve point five millimeters ) tile (40%) (forty percent ) with rock wool backing (40 mm)(forty millimeter ) thick layer fixed with saint gobain gyproc powder coated T-grid system or its equivalent at the rate of 600 mm (six hundred millimeters ) center to center as per detail as per specifications or as per directed by Engineer in Charge complete including carriage of materials within all leads and lifts and other incidental charges. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government

15mm (fifteen millimeters) thick cement plaster with cement mortar 1:6 (one cement; six sand) in single coat on rough side of brick/concrete/stone walls for interior plastering in all heights including arises, internal rounded angles, chamfers and/ or rounded angles in all girth and finished even and smooth including carriage of materials with in all leads and lifts and other incidental charges. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.

15mm (fifteen millimeters) thick cement plaster with cement mortar 1:6(one cement; six sand) in single coat on fair side of brick/concrete/stone walls for interior plastering in all heights including arises, internal rounded angles chamfers and/ or rounded angles in all girth and finished even and smooth including carriage of materials with in all leads and lifts and other incidental charges. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government .

Finishing wall with Apex weather proof exterior grade emulsion of approved design (Apexultima) of Asian paints/Nerolac Suraksha paints or its equivalent brand and manufacture of approved shade on undecorated concrete / stone / plastered wall surfaces with two or more coats to give an even shade and final finish after thoroughly cleaning / brushing the surfaces to remove all dirt , dust mortar dropping and other foreign matter and sand papered smooth including applying of putty as required for making the surfaces upto all floor level complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.

Wall painting ( two coat or more ) with premium emulsion paint of Asian/ Nerolac paint approved brand and manufacture of approved shade for interior grade on undecorated concrete / stone / plastered wall surfaces to give an even shade including thoroughly brushing the surfaces free from mortar dropping and other foreign matter and sand papered smooth including applying of putty as required for making the surfaces upto all floor level complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government

Wall painting ( two or more coat ) with Epoxy Resin paint of pidilite of approved brand and manufacture of approved shade for interior grade on undecorated concrete / stone / plastered wall surfaces to give an even shade including thoroughly brushing the surfaces free from mortar dropping and other foreign matter and sand papered smooth including applying of putty as required for making the surfaces upto all floor level complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.

Distempering (two or more coats)with oil bound washable distemper of Asian /Nerolac approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including priming coat of distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter including preparing the surface even and sand papered smooth priming coat with distemper primer including carriage of materials within all leads, lifts, and other incidentals and as per approved drawings, design and as directed by the Engineer in charge. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.

Painting two or more coats ( excluding priming coat) on new wood and wood based surface with enamel paint of approved brand to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter, with white enamel paint including carriage of materials with in all leads and lifts. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government

Applying JK / Birla whitewall care putty over plastered surfaces after thoroughly brushing the surface free from mortar drops, dust, loose material and other foreign matter sand papered smooth to give final matter finish to the surfaces complete including carriage of materials with in all leads and lifts and as per approved drawings, design and as directed by the Engineer in charge. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government

Water supply and sanitary installation : Providing and fixing polyethylene aluminium polyethylene (PE-AL-PE) composite pressure pipe U.V. stabilized with carbon black confrming to IS- 15450-2004 kitec or its equivalent water supply including clamp at one metre spacing cutting fixing and making good the wall etcetera but excluding the cost of fittings (internal work ) pipes exposed on wall internal work Exposed on wall 1216 (one thousand two hundred sixteen ) (16mm O.D. pipe ) (sixteen millimeter outer dia )including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government

Providing and fixing 150mm ( one hundred fifty millimeters ) dia metre high pressure P V C ( poly vinyl chloride) spigot and socket , waste and ventilating pipes ISI marked including fixing with approved adhesive complete including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government

Providing and fixing 110mm (one hundred ten millimeters) high pressure P V C ( poly vinyl chloride) spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive complete diameter including carriage of materials within all leads, lifts and other incidental The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.

Providing and fixing 75mm ( seventy millimeters) diameter high pressure P V C ( poly vinyl chloride) spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive complete including carriage of materials within all leads, lifts and other incidental The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government

Providing and fixing 150mm ( one hundred fifty millimeter) dia meter Collar ISI PVC ( poly vinyl chloride) marked conforming to IS No. 14735-99 of Supreme/ Kishan/ Astral including fixing with approved adhesive etcetera complete including carriage of materials within all leads, lifts and other incidental The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.

Providing and fixing 110mm (one hundred ten millimeter) dia meter collar ISI PVC ( poly vinyl chloride) marked conforming to IS No. 14735-99 of Supreme/ Kishan/ Astral including fixing with approved adhesive etcetera complete including carriage of materials within all leads, lifts and other incidental The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.

Providing and fixing 75mm (one seventy five millimeter) dia meter collar ISI PVC ( poly vinyl chloride) marked conforming to IS No. 14735-99 of Supreme/ Kishan/ Astral including fixing with approved adhesive etcetera complete including carriage of materials within all leads, lifts and other incidental The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.

Providing and fixing 75mm ( seventy five millimeters ) dia meter PVC ( poly vinyl chloride) cowl of Supreme/ Kishan / Astral ISI marked confirming to IS No. 14735-99 including fixing with approved adhesive etcetera complete including carriage of materials within all leads and lifts and other incidental. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government

Providing and fixing 110 x 90 mm (one hundred ten into ninety millimeters ) nominal size P.V.C. floor trap of Supreme/ Kisan/ Astral ISI marked Confirming to BIS-14735-99 of self cleaning design including fixing with approved adhesive , cost of cutting and making good the wall and floor etcetera complete including carriage of materials within all leads and lifts and other incidental. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government

Providing and fixing vitreous China wash down water closet of Star S. No, 20087 (S-10 ) of size 57x 35x 39 cm (fifty seven into thirty five into thirty nine centimeters) (European Type WC pan) of approved make of (HIND WARE/CERA MAKE/ Jaquare of Star White / Snow white shade ) and of approved shade, with integral ‘P’ or ‘S’ trap including jointing the trap with soil pipe in cement mortar 1:1 (one cement is to one sand) complete (seat cover to be measured and paid for separately ) as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government

Providing and fixing 10.00 /12.50/15.00(ten point zero / twelve point five zero/ fifteen point zero zero) liters capacity (full flush ) European standard control low level P V C . flushing cistern ( sleek plus Hindware/ Cera/ Jaquar or star whie / snow white shade with a pair of P V C . or mild steel brackets with fittings such as ,15mm(fifteen millimeter) nominal size) P V C ball valve with polythene float with push button 40mm ( forty millimeters ) dia metre chromium plated flush bend couplings for connections with inlet out let and over flow pipes connecting the flush bend with cistern and closet including cutting holes in walls and making good the same and including carriage of materials in all leads and lifts. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government .

Providing and fixing G.I. inlet connection for flush pipe with W.C. pan complete in all respects as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government

Providing and fixing solid type white plastic seat and cover of Hindware/ Cera/ Jaquar or Star White / Snow white shade for wash down water closet with CP brass hinges and rubber buffers as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government

Providing and fixing flat back vitrious China Wash Basin Delta No. 10010 of size 55x 40 cm ( fifty five into forty centimeter ) Hindware/ Cera/ Jaquar with single holes for pillar tap with cast iron or mild steel brackets painted white including cutting holes in walls and making good the same but excluding fitting complete including carriage of materials with in all leads and lifts. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government

Providing and fixing 32mm (thirty two millimeter) diameter rubber plug for wash basin or sink complete including carriage of materials within all leads and lifts and other incidental. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government

Providing and fixing 32mm (thirty two millimeters)diameter M.I. union for wash basin or sink complete including carriage of materials within all leads and lifts and other incidental. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government

Providing and fixing 32mm (thirty two millimeters)diameter chromium plated continental series of Jaquar / classik series or Hindware/ JAL or its equivalent brass waste for wash basin or sink complete including carriage of materials within all leads and lifts and other incidental. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.

Providing and fixing 100 mm ( one hundred millimeters ) chromium plated ISI marked IS NO. 8934 of Jaquar / Hindware or its equivalent grating of superior quality for floor, gully , or Nahni trap complete including carriage of materials with in all leads and lifts and other incidental The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government

Providing and fixing 600mm x 450mm (six hundred millimeters into four hundred fifty millimeters) bevelled edge mirror of Hindware/ Cera/ Jaquar of superior glass mounted on 6mm ( six millimeters) thick asbestos cement sheet or ply wood sheet and fixed to wooden plugs with chromium plated Brass screws and washers complete including carriage of materials within all leads and lifts and other incidental The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government

Providing and fixing750x20mm.(Seven hundred fifty into twenty millimeter) chromium plated brass towel rail of Prayag/ Hindware/ Cera complete with chromium plated brass brackets fixed to wooden plugs with chromium plated brass screws including carriage of materials within all leads and lifts and other incidental The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government

Providing and fixing 600x120mm(Six Hundred into One Hundred twenty millimeter ) glass shelf of Hindware/ Cera/ Jaquar with Chromium plated brass bracket of heavy duty of ISI marked IS No. 8931 and 8934 and guard rail complete fixed to wooden plugs with Chromium plated brass screws including carriage of materials within all leads and lifts The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government

Providing and fixing C.P. brass toilet paper holder of Jaquar/ Hindware/ Cera of heavy duty of ISI marked IS No. 8931 and 8934 with C.P. brass washer and nut complete including carriage of materials within all leads and lifts. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government

Providing and fixing C P Jet spray of continental series of Jaquar/ classik series of Hindware of approved quality and color with with one metre tube including carriage of material with in all leads and lifts and other incidentals. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government

Providing and fixing 15mm (fifteen millimeters )diamete chromium plated brass bib tap of Jaquar/ Hindware/ Cera ISI marked No. 8934 with capstan head complete including carriage of materials within all leads and lifts and other incidental or as directed by the Engineer-in-Charge. The rate inclusive of Royalty , Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.

Providing and fixing chromium plated 15mm (fifteen millimeters) diameter chromium plated stop cock of Prayag/ Hindware/ Cera / Jaquar with necessary fitting including carriage of materials within all leads and lifts or as directed by the Engineer-in-Charge. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government

Providing and fixing15mm (fifteen millimeter)diameters chromium plated brass pillar tap of Prayag/ Hindware/ Cera / Jaquar with capstan head complete including carriage of materials with in all leads and lifts and other incidental or as directed by the Engineer-in-Charge. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government

Providing and fixing 15mm (fifteen millimeter)diameters chromium plated brass angle valve of Prayag/ Hindware/ Cera / jaquar without nuts and pipe complete including carriage of materials within all leads and lifts and other incidental The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government

Providing and fixing 15mm ( fifteen milimetre)nominal bore brass full way valve with wheel of Jaquar/ Hindware/ Cera complete including carriage of materials within all leads, lifts and other incidentals and or as directed by the Engineer-in-Charge. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.

Providing and fixing 15mm ( fifteen milimetre)nominal bore brass ball valve ( Horizontal plunger type ) high pressure with polythene plastic float of jaquar/ Hindware/ Cera complete including carriage of materials within all leads, lifts and other incidentals The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.

Providing and fixing I S I marked 45cm ( forty five centimeters ) long and 15mm ( fifteen millimeters ) nominal bore P V C Connection pipe with brass union complete including carriage of materials within all leads and lifts The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.

Providing and fixing 32mm (thirty two millimeters) diameter PVC waste pipe for wash basin or sink complete including carriage of materials within all leads and lifts and other incidentals. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.

Providing and laying 150 mm (one hundred fifty millimeter) internal dia meter salt glaze stone ware pipe grade ‘A’ (to level or slope) and jointing with stiff mixture of cement mortar in proportion of 1 : 1 (one cement : one sand ) complete of including testing of pipes and joints complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.

Providing and laying cement concrete 1:5:10 (one cement; five sand : ten graded /crushed stone aggregate 40mm(forty millimeters) nominal size ) bedding for stone ware pipe of 150mm (one hundred fifty millimeters) internal diameter including necessary form work and curing complete including carriage of materials within all leads and lifts and other incidental. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.

Constructing manhole with reinforced cement concrete top slab in cement concrete 1:2:4 ( one cement; two sand; four graded / crushed stone aggregate 20mm ( twenty millimeters ) nominal size), mix foundation concrete 1:4:8 ( one cement : four sand: eight graded / crushed stone aggregate 40mm(forty millimeters) nominal size) in side plastering 15mm ( fifteen millimeters) thick with cement mortar 1:3 (one cement; three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 ( one cement ; two sand; four graded / crushed stone aggregate 20mm ( twenty millimeters ) nominal size) finished smooth complete including curing and testing a) inside size 800mmx800mm (eight hundred millimeters into eight hundred millimeters) and 500mm ( five hundred millimeter ) deep including cast iron cover with frame (light duty single seal pattern-I ) 455 x 610mm( four hundred fifty five into six hundred ten millimeters) internal dimension total weight of cover and frame to be not less than 38 kg. ( thirty eight kilogramme ) (Weight of cover 23 kg. (twenty three kilogramme) and weight of frame 15 kg.)(fifteen kilogramme) with 300mm (three hundred millimeters ) thick walls of square rubble masonry coursed with hard stone of approved quality in cement mortar 1:3(one cement; three sand) complete including carriage of material within all leads and lifts and other incidentals The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.

Constructing manhole with reinforced cement concrete top slab in cement concrete 1:2:4 ( one cement; two sand; four graded / crushed stone aggregate 20mm ( twenty millimeters ) nominal size), mix foundation concrete 1:4:8 ( one cement : four sand: eight graded / crushed stone aggregate 40mm(forty millimeters) nominal size ) in side plastering 15mm ( fifteen millimeters) thick with cement mortar 1:3 (one cement; three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 ( one cement ; two sand; four graded / crushed stone aggregate 20mm ( twenty millimeters ) nominal size ) finished smooth complete including curing and testing a) inside size 800mmx800mm (eight hundred millimeters into eight hundred millimeters) and upto any depth including cast iron cover with frame (light duty single seal pattern-I ) 455 x 610mm( four hundred fifty five into six hundred ten millimeters) internal dimension total weight of cover and frame to be not less than 38 kg. ( thirty eight kilogramme ) (Weight of cover 23 kg. (twenty three kilogramme) and weight of frame 15 kg.)(fifteen kilogramme) with 300mm (three hundred millimeters ) thick walls of square masonry coursed with hard stone of approved quality in cement mortar 1:3(one cement; three sand) complete including carriage of materials within all leads and lifts and other incidentals or as directed by the Engineer-in-Charge and all type of taxes imposed by the Government. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.

Constructing brick masonry chamber for under ground Cast iron inspection chamber and bends with second class common clay bricks in cement mortar 1:5 (one cement; five sand) cast iron. cover with frame (light duty) 355x610mm( three hundred fifty five into six hundred ten millimeters) internal diamensions total weight of cover with frame to be not less than 38 kg ( thirty eight kilogramme ( weight of cover 23 kg( twenty three kilogramme ) and weight of frame 15 kg.) (fifteen kilogramme ) with RCC top slab in cement concrete 1:2:4 (one cement; two sand four graded crushed stone aggregate 20mm(twenty millimeter) nominal size) mix foundation concrete 1:5:10 ( one cement: five sand: 10 graded crushed stone aggregate 40mm ( forty millimeters ) nominal size ) inside plaster 15mm(fifteen millimeters) thick with cement mortar 1:3( one cement three sand) finished smooth with a floating coat of neat cement on walls and bed concrete etcetera complete inside dimensions 455x610 x450mm (four hundred fifty five into six hundred ten into four hundred fifty millimeter) deep single pipe line complete as per HP. PWD. Specifications or as directed by Engineer in charge including carriage of materials within all leads and lifts and other incidentals. The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government.

Providing and fixing composite end seal compression fitting as per IS -15450 - 2004 for cold water supply including pointing , testing and fitting complete, cutting hols and making good the same including carriage of materials within all leads, lifts and other incidentals incidentals The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government . A) equal tee 1620 ( one thousand six hundred twenty )

Providing and fixing composite end seal compression fitting as per IS -15450 - 2004 for cold water supply including pointing , testing and fitting complete, cutting hols and making good the same including carriage of materials within all leads, lifts and other incidentals incidentals The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government (b) Female elbows 1620x15mm ( one thousand six hundred twenty into fifteen millimeter) thread

Providing and fixing composite end seal compression fitting as per IS -15450 - 2004 for cold water supply including pointing , testing and fitting complete, cutting hols and making good the same including carriage of materials within all leads, lifts and other incidentals incidentals The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government (c)Female branch Tee 1620x1620mmx20mm ( one thousand six hundred twenty into one thousand six hundred twenty into twenty millimeter)

Providing and fixing composite end seal compression fitting as per IS -15450 - 2004 for cold water supply including pointing , testing and fitting complete, cutting hols and making good the same including carriage of materials within all leads, lifts and other incidentals incidentals The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government (d) Female elbows 1620x15mm ( one thousand six hundred twenty into fifteen millimeter) thread

Providing and fixing composite end seal compression fitting as per IS -15450 - 2004 for cold water supply including pointing , testing and fitting complete, cutting hols and making good the same including carriage of materials within all leads, lifts and other incidentals incidentals The rate inclusive of Royalty, Malkhana, Octroi, Toll Tax , GST or any other taxes imposed by the Government ( e) Male thread connector 1620x15mm ( one thousand six hundred twenty into fifteen millimeter) thread

Providing and fixing ISI marked 600 x 460mm (six hundred into four hundred sixty millimeter ) with bowl depth 200mm (two hundred millimeter) size stainless steel kitchen sink with drain board and C.P. waste with C.I. or M.S brackets painted white including cutting holes in walls and making good the same but excluding the cost of fitting as per HPPWD specifications or as directed by Engineer in charge including carriage of materials within all leads and lifts. The rate inclusive of Royalty, Malkhana , Octroi, Toll Tax , GST or any other taxes imposed by the Government.

sourav mahajan