Chatarpur Water Supply Scheme of Block Rudrapur

Amount

OVER HEAD TANK WORKS 150 Kl 17 m. Staging

Design and Construction of RCC O.H.T of 150 Kl capacity (in Kiloliters) and 17 m. Staging with 1.00m wide RCC staircase from G.L. to balcony and from balcony to Top Dome 1m x 1m RCC landing at suitable locations and railed with 3 rows of 25mm dia. G.I. (M) pipe on 65x65x5mm angle iron posts fixed with ladder, top to the floor inside of the tank. M.S. M.H. cover with loacking arrangement, lightning conductor as per electricity rules, water level indicator, supply and fixing of outlet, inlet, overflow and wash out pipes with necessary sluice valves, pipe pieces (including cost of materials) flooring 0.60 M wide apron, painting on tank body, vertical pipe, ladder M.S M.H. cover , ventilator column etc. complete with approved water proofing ( apex)/ enamal paint, testing, filling water for testing purpose etc. including supply of vertical pipes and specials assuming bearing capacity as 8MT/M2 staging 12.00 meter

Additional rates for staging per meter height beyond 12 m height including cost of all material, labour, shuttering, scaffolding T&P complete for 205 Kl capacity Over Head Tank. (Extra 5 M. Height)

Construction of masonry type chamber for sluice value Size as per type design.

PUMP HOUSE WITH ATTENDANT ROOM

Earth work in excavation by mechanical means (hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 mtr in width or 10 sqm on plan) including dressing of sides and ramming of bottom, lift up to 1.5 mtr including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m in all kinds of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level in 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering and shuttering finishing and reinforcement -all work up to plinth level in 1:1.5:3 (1 cement : 1.5 coarse sand : 3 grad aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 degree landing, balconies, shelves, chajjas, lintels, bands, plain window sills, stair cases and spiral stair cases up to floor five level excluding the cost of centering and shuttering finishing and reinforcement -all work up to plinth level in 1:1.5:3 (1 cement : 1.5 coarse sand : 3 grade aggregate 20 mm nominal size)

Reinforcement in RCC work including straightening, cutting, bending, placing in position and binding, using Thermo-Mechanically Treated bars all complete.

Centering and shuttering including strutting, roping etc. and removal of form for edges of slabs and breaks in floors and walls under 20 cm wide circular in shape.

Foundation raft & tie beams

Columns

Beams

Edges of slabs and breaks in floors and walls under 20cm wide

Provide Ist class brick in 1:6 cement and sand mortar.

In foundation up to plinth

in superstructure

40mm thick DPC in 1:2:4 with cement, sand and 20mm gauge stone ballast mortar

Steel work welded built of section /framed works including cutting fixing in position applying a priming code of approved steel primer using steel its as required in gratings, frames, guard bar, ladder, railing gates and similar works.

Door Chaukhat / section window

Earth filling into plinth including it's excavation.

Provide 40 mm thick PCC flooring in 1:2:4 with cement, sand and 20mm gauge stone ballast mortar.

Provide 5mm thick glass strips on flooring 20mm deep.

Provide 15mm thick plaster in 1:4 cement and sand mortar.

Provide weather coat painting (two or more coats) to give an even shade.

Painting on doors and windows (two or more coats) over and including one priming coat.

Supply and fixing of 4mm thick plane glass panes on window's including supply of nails and putty etc all complete.

Sanitary Items

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required White Vitreous china Orissa pattern W.C. pan of size 580x440 mm.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size 450x 300 mm with single 15 mm C.P. brass pillar tap

Providing and fixing G.I. pipes complete with G.I. fittings and clamps/c cutting and making good the walls etc. Internal work

15 mm dia nominal bore

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :

15 mm nominal bore

Supply and fixing of PVC pipes for waste water and sewer pipes.

75 mm diameter

110 mm diameter

Provision for septic tank and soak pit including sewer line and all necessary connections, complete in all respect as per direction of Eng-in-charge.

Provision for Electrification inside and outside of the roomcomplete in all respect as per direction of Eng-in-charge.

RISING MAIN

Providing of all materials, carting from site store to site of work, Lowering into trenches with true alignment, Laying & Jointing of full length S&S Centrifugally Cast (Spun) / Ductile Iron Pipes including supply of ''EPDM" rubber gaskets conforming to IS : 5382-1985 with testing of pipe line complete. DI K-9 pipe confirming to IS:8329/2000 : 100 mm dia

Providing push-on-joints to Centrifugally (spun) cast Iron pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket: 100mm dia

Providing and laying D.I. specials of class K-12 suitable for push-on jointing as per IS: 9523-2000 Upto 600 mm dia

Excavation in Ordinary Soil (loams, clay, sand) for foundation including lift up to 1.5 m and lead up to 30 m filling, watering and ramming of Excavated the earth into the trenches or into the sides between foundation trenches or into the plinth and removal. (20 X 0.70 X 1.10)

DISTRIBUTION SYSTEM WORKS

Providing, Lowering into trenches with true to alignment, Laying & Jointing including specials of full lengths of HDPE Pipes of specified grade as per IS:4984-1995 and specifications, with testing of pipe line including supply of jointing materials. PE 100 PN-6

Dismantling and reinstatement of following type of road surface for laying of pipe line including sorting out of serviceable materials and disposal of unserviceable materials.

Cement Concrete Road

Dismantling and reinstatement of Bituminous Road (not PWD Road)

Excavation in Ordinary Soil (loams, clay, sand) for foundation including lift up to 1.5 m and lead up to 30 m filling, watering and ramming of Excavated the earth into the trenches or into the sides between foundation trenches or into the plinth and removal.

Providing and fixing enclosed type water meter (bulk type) conforming to IS:2373 and tested by Municipal Board complete with bolts, nuts, rubber insertions etc.

Constructing masonry Chamber (90X90X100)cm for sluice valve/scour valve with a floating coat of neat cement complete as per standard design : With F.P.S. bricks

Constructing masonry Chamber for Air valve with a floating coat of neat cement complete as per standard design :With F.P.S. bricks

House Service Connection

BOUNDARY WALL AND GATE

Supply of all labour, materials, and T&P etc. and construct boundary wall at proposed water works site as per Approved Design and Drawings, Provided by the Department.

Supply of all labour, materials, and T&P etc and privide 3.6 m wide M.S. gate with pillars as per departmental type design, at proposed water works site.

Dry brick on edge flooring in required pattern with bricks of class designation 7.5 on a bed of 12 mm mud mortar, including filling joints with Jamuna sand, with common burnt clay non modular bricks.

Supplying and filling in plinth with Jamuna sand including watering, ramming, consolidating and dressing complete in proposed water works.

E&M WORKS

Construction of 1No. 200mm dia, 180 Mt. deep Tubewell.

Transportation of Rig machine, compressor O.P. unit, T & P and other equipments up to site & back transportation after completion of work.

Installation of Rig machine, Camp equipage after site clearance.

Drilling 450mm dia size final bore from G.L. to 180.00 MBGL Including arrangemt of water, Geophysical logging of bore well, feeding of pea-gravel & collection of strata sample in box. .

Preparing and Lowering of 200mm dia plain/ Slotted pipe tube well assembly from 180MBGL

Dismantling of Rig machine after completion of work. Fitting of girder, clamp and well cap with site clearance

Supply & lowering of Tubewell assembly.

200mm dia 8.0 mm thick M.S.E.R.W. plain pipe.

200mm dia 8.0mm thick M.S.E.R.W. Slotted pipe.

200x100mm dia size M.S Girder 4Mt. Long for T.W. assembly.

200mm dia Bail plug with hook.

M.S. heavy duty D.E clamp suitable for 200mm dia.

200mm dia well cap.

Supply and shrouding of Pea-Gravel 2.00 to 4.00 mm upto 180Mt.MBGL

Development of Tubewell by 350 PSI/1100CFM air comperssor.

Development by Air compressor including erection of Air compressor unit and dismantling after work as per specification.

Development of Tubewell by O.P. unit of suitable capacity.

Development by O.P unit to get sand free discharge of 750 LPM including erection of O.P. Unit and dismantling after work as per specification.

Geohydrologgical survey of site

Chemical & Bacteriological Test of water

S.I.T.C. of Submersible Pumping Plant with Accessories for Proposed Tubewell

Supply of Submersible pump and motor set: 600 L.P.M. discharge at 65 mts. NEH.

Supply of Submersible pump and motor set: 600 L.P.M. discharge at 65mts. NEH. as spare.

Supply of Fully automatic Air cooled Auto-Transformer Starter cum panel of 20 HP as per spacification .

Supply of Main piping and valves as per specification and site Requirment

Supply of of 10 sq.mm. 3 core Copper conductor P.V.C. insulated submersible cable

Supply of 40 KVA automatic voltage regulator (compact) servo controlled stabilizer with accessories as per specification and site Requirment

Supply of chain pulley 3 tonne capacity with 4.5mt.lift .

Supplyl of Electronic type liquid chlorine dosing system

Supply of Chlorine Testing Kit

Supplyl of Liquid Chlorine (50 Kg Cane)

Supply of Gauges as per specification

Supply of Earthing materials as per specification and site Requirment

Supply of Rubber Insulation sheet 1mt. x 2mt.x 0.025 mtr.

Supply & Fixing of electronic type dosing system complete with solenoid coil actuated pulsar circuit, diaphram & electronically pulp capable of delivery max, 4 LPH at 5.5kg/cm2 pressure operated 220Volt single phase A.C. Supply along with chemical injection device and 100 Ltrs capacity of media tank complete with accessories.

Supply of 100 Amp. TPN Main Switch

Intelligent GSM based Mini Remote Terminal Units/PLC with analog and digital parameters and features as specified mini T.W. and transmit data on GSM backbone. GSM based wireless Communication system capable to transfer and gather data from remote sites to master Control Stations (Voltage, Current, Power factor, Pumping running Hour etc.) with 6 Amp. Automatic Voltage stabilizer including high and low cut and isolation transformer including modification of starter with AC & DC relays and necessary wiring with erection, testing & commissioning complete in all respect.

Tools and Spanners with 2 Nos. chain wrench –

Installation, commissioning and Testing of all pumping plant & Accessoriees complete

Internal & External Electrification of pump house for Proposed Tubewell

One month Trial Running & Five months Maintenance including watch & ward.

AWASTHI TUBEWELL COMPANY