Providing additional Q-lines & water lines in Sri Sowmyanatha Swamy Temple at Nandaluru, Annamaya District.

Supplying and fixing in position M.S tubes & Pipes of all diameters of approved design including necessary cuttings, bending fabrication, welding, grinding and finishing smooth including painting the grills with Two coats with Synthetic enamel paint over a Primary coat (Red oxide metal primer) (total three coats) of approved make and colour including cost of making the holes into RCC or masonry works and making good the same wherever necessary, including cost and conveyance of all materials, incidental charges etc., complete.

Cement Concrete (1:11/2:3) using 20mm (0.552 Cum) and 12 mm (0.368 Cum) nominal size Hard broken granite crushed metal from any source conforming to the relevant ISI standards for foundations etc., laid in layers of not more than 15cm thick well compacted including curing cost and conveyance of all materials etc., complete

Supply of stainless steel SS-304 grade, including cost and conveyance of all materials and labour charges for fabrication of stainless steel including buffing, polishing , lacquer finishing , to present seamless finishing etc., complete as directed during execution

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to 2" SDR 13.5 pipes are made from idential CPVC compounds having the same physicalProperties for Hot and Cold Water (IS 15778:2007) -do- 28.60mm OD Pipe - SDR 13.5

Manufacture, Supply and Delivery of Unplasticised PVCs Pipes of 6 Kgs/cm2 for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in AP excluding all taxes. -do- 75mm Dia.

Providing & Placing on Terrace(at all floor levels) polyethylene water storage tank of Double layer Roto moulded confirming to IS:12701 approved brand & manufacture with suitable cover/cap and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks