Urgent electro-mechanical works at Hibdangerpora Lift Irrigation Scheme of MISD Sopore.

Amount

a. Charges on account of Providing and fitting of 185sq mm 3 ½ core XLPE insulated, 1100V armoured cable as per Is 7098 (Preferred make: Finolex/Gloster/Havells/KEI/Polycab), complete in all respects with thimbling on both ends to each terminal from transformer to the LT fuse system/MCCB—25m (item code 13.6.8) b. Charges on account of P/f of LT fuse system by way of p/f of LT 6 No. insulator Shackles on the wooden frame by means of drilling, nuts & bolts. The job includes p/f of wooden frame to the panel board by means of drilling/welding, p/f nuts and bolts. The fuse system shall be connected to the service line terminals from one end and to the circuit of the pumping units at other end. (01 job) c. Charges on account of Providing and fitting of 3pole 415V 400A MCCB with thermal magnetic release having 50kA breaking capacity Ics = 100% Icu, Make: L&T d-sine or equivalent—01 job.(item code 11.2.5) d. Providing and fitting of 15W LED bulbs inside the pump house on four walls at identified spots (preferred makes: Havells/Philips/Osram/Eveready/Cromton/Syska/Bajaj/Andslite). 4No.( item code 14.12.4) e. Providing, Fixing, Testing of 6A ceiling rose. 4 No. (item code 14.6.15) f. Providing and installation of angle holders. Make: SSK/Anchor/Havells 4 No.( item code 14.6.16) g. Providing and fitting of heating point with socket, switch and neon indicator. Make: SSK/Anchor/Havells 2 No. (item code 14.6.12) h. Providing and fitting of 3-pin 6A socket. 2 No. Make: SSK/Anchor/Havells (item code 14.6.5) i. Providing and fitting of Switch 6A SP. 6 No. Make: SSK/Anchor/Havells (item code 14.6.1) j. Providing and fitting of surface mounting box for switches, gang box. 1 No. (item code 14.6.14.6) k. Providing and fitting of PVC insulated 1100V, 1 sq mm flexible copper cable (FRLS) for electrical insulations (preferred makes: Finolex/anchor/L&T/Havells/KEI/Polycab 90m (item code 14.1.1) l. Providing and fitting of PVC insulated 1100V, 2.5 sq mm flexible copper cable (FRLS) for electrical insulations (preferred makes: Finolex/Anchor/L&T/Havells/KEI/Polycab 50m (item code 14.1.1) m. Providing, installation and testing of die cast aluminium floodlight LED, 30W (preferred makes: Havells/Philips/ Osram/Ledvance/Crompton, 2No.(item code 14.13.1) n. Providing and fitting of 25mm PVC round conduit (medium) with allied PVC fittings. 20m (Item code 14.0.2) o. Providing and installation of 8 way SPN sheet steel enclosed Distribution boxes single door (Make: L&T/Legrand /hager/ Havells/Schneider). 1 No.(item code 14.7.2) p. Proving and installation of B series MCB 6-32A SP. 6 No. (preferred makes: Havells/Philips/Osram/Ledvance/ Crompton ,4No.(item code 14.13.1) q. Proving and installation of wall fan 300mm sweep, make: Havells/ Orient/Cromton – 1 No. (Item code 14.11.4) r. Providing and testing of 3 W Rechargeable LED Torch, Make Havells/ Eveready/Andslite/Syska—01 No.(14.20) s. Providing and testing of LED Lantern with twin charging mode—charging cable & solar panel include. Make: Syska/Havells/Andslite/Philips/Bajaj—01 No (item code 14.21) t. P/F of flush type analogue moving iron AC meter, Make: Rishab/AE/C&S/ BCH, 0-500V voltmeter-02 No. (item code 12.2.2) u. P/F of ampere meter (0-200)A/5 Make: Rishab/AE/C&S/ BCH, -02 No. v. Charges on account of repairs to the 300mm dia NRV by way of opening of the top plate of NRV and replacement of the weight plate and welding thereof, p/f of rubber gasket of required size and p/f of nuts and bolts 3kg, fitting back top of the NRV after carrying out repairs.—01 job w. Charges on account of painting to the pumping equipments and suction/delivery line of the pumping units by cleaning the surface, then applying a coat of metal oxide and then epoxy blue/black paint in two coats. (25 sq m)—01 job x. Charges on account of taping of the casing of the Unit-III of Hibdangerpora LIS by way of dismantling of the suction end of the pump and then boring and taping of the casing at site. The job shall include providing and fitting of suitable size casing studs and nuts to the unit (18 No.). the job is to carried out at site by engaging skilled mechanic having expertise in the field.(01 job) y. Providing and testing of heavy duty lever grease gun with Aluminium die cast head, air release valve on head, complete with rigid extension and coupler.—03 job

MEER ENGINEERS INDUSTRIAL ESTATE SOPORE