Establishment of New Rythu Bazaar at Piler Village under AMC, Piler of Annamayya District

Earth work excavation in foundation for Buildings and depositing the earth on bank with an initial lead of 10 M and lift of 2 M in loamy, clayee soils like Black Cotton, red earth, ordinary gravelly soils excluding rock, including shoring, strutting, sheet planking, and bailing out water etc., dressing the bottom of foundation with uniform surface in all directions and thoroughly rammed before laying of concrete etc., complete. for foundations.

PCC (1:5:10) using 40mm nominal size HBG machine crushed metal as per SS108, machine mixing, concrete laying in position in layer not exceeding 150mm in thickness, including cost and conveyance of all materials and water to work site and all operational incidental labour charges such as mixing concrete, laying compacting by using vibrator, curring including all taxes etc., complete for finished item of work.

VRCC M-20 Design Mix (cement: fine aggregate coarse aggregate) using 20mm size machine crushed hard granite (coarse aggregate) from approved queary including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete. curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work, For Footings

VRCC M-20 Design Mix (cement: fine aggregate coarse aggregate) using 20mm size machine crushed hard granite (coarse aggregate) from approved queary including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete. curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work, For Pedestals upto G.L. Beam

VRCC M-20 Design Mix (cement: fine aggregate coarse aggregate) using 20mm size machine crushed hard granite (coarse aggregate) from approved queary including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete. curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work, For Ground level beam

VRCC M-20 Design Mix (cement: fine aggregate coarse aggregate) using 20mm size machine crushed hard granite (coarse aggregate) from approved queary including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete. curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work, For Columns

VRCC M-20 Design Mix (cement: fine aggregate coarse aggregate) using 20mm size machine crushed hard granite (coarse aggregate) from approved queary including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete. curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work, For Roof Slab 100 mm thick

Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work

Providing High yield strength deformed bars of Fe 500 grade of different diametres, cuttings and bending to the required sizes and shapes, placing in position with cover blocks of approved materials and sizes tying firmly with MS binding wire forming grills for reinforcements work as per approved drawings to be supplied at the time of execution of work, including cost and conveyance of deformed bars, labourcharges such as cutting, bending, placing in position, etc., complete for finished item of work (payment will be made on the basis of weight of fabricated deformed bars only) as per standard specifications

Filling with carted gravel in foundations for bed and in basement in layers not exceeding 150mm thick consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges all taxes etc., complete for finished item of work

Filling with stone dust 2.36mm in foundations for bed and in basement in layers not exceeding 150mm thick consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges all taxes etc., complete for finished item of work

PCC M20 using 20 mm HBG / HBT machine crushed metal and screened sand including cost and conveyance of all materials to site from approved source, centering machine mixing, laying concrete in position vibrating curing for required period labour charges for all items of work but excluding cost of steel and its fabrication charges and including all other Incidental & operational charges etc., complete as per standard specifications

Flyash Brick Masonry work in CM(1:6) prop with fly ash with cement solid blocks of size 290x225x140 mm for manfacturing of fly ash of 75 kgs, cement of 15 kgs ,Gypsum of 5 kgs and stone dust including cost and covyance of all materials, labour charges , seiniorage charges ,scaffolding,curing charges with compressive strength not less than 50kg/Sqcm for walls for super strucure walls

Supply and Fixing of MS Rectangle Purlins of size 60mm x 38mm x 2.90mm thick of 4.00 m long medium guage by welding of 6mm thick cleats of size 150mm x 65 mm on both sides of the pipes in position with necessary bolts and nuts washors including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work

Supply and Fixing of MS Square Purlins of size 40mm x 40mm x 3.00 mm thick of 3.00 m long medium guage by welding of 6mm thick cleats of size 150mm x 65 mm on both sides of the pipes in position with necessary bolts and nuts washors including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work

Roofing: - Roofing will be provided with 0.5mm thick galvanized / pre painted G.I. profiled sheets fixed to the purlins with 14 size self drilling screws with neoprene washer. Side laps are stitched with self tapping / drilling screws. End laps are to be sealed with 25x3 mm Butyl tape. The sheets are provided with anti capillary grove.

Plastering with CM (1:5) 12 mm thick including cost and conveyance of cement and all other materials and labour charges for mixing and making surface neatly to plumb, scaffolding charges, curing etc., complete including all incidental and operational charges and all water leads and lifts etc., complete for finished item of work and as directed by the Engineer – in – charge at site for external surface as per standard specifications.

Plastering with CM (1:5) 20 mm thick including cost and conveyance of cement and all other materials and labour charges for mixing and making surface neatly to plumb, scaffolding charges, curing etc., complete including all incidental and operational charges and all water leads and lifts etc., complete for finished item of work and as directed by the Engineer – in – charge at site for external surface as per standard specifications.

White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials

Supply and fixing of 12mm dia 0.60 m long mild steel foundation bolt with necessary thread, bolts, nuts and washers and placing them in position including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work.

Supply, fixing, fabrication and Errection of 10mm thick base plates bottom and top of size 0.35 x 0.35 m and 0.25 x 0.25m including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work.

Painting with best Synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers.

Supply, installation and commissioning approved make floor mounted EWC (Suit) CASCADE model ‘P’ or ‘S’ trap with dual flush porcelain cistern fixed on EWC with all internal parts of dual flush cistern, ultra solid seat cover of approved make with rubber buffer and cap 15mm angle stop cock 450mm long PVC inter connection pipe wall flanged all of approved make etc., complete for finished item of work in all respects

Supply and fixing of WPC flush doors of size 0.75 x 2.00 m (For Toilets door) made with frame of WPC materials of size 0.075 M x 0.05 M @ (75mm x 50mm) x 6 Nos Hold fasts (3 on each side) (wood plastic composite) and painted with liquid bitumen on walls side and flush door shutter of wood plastic composite (WPC) solid bond wood block board Type of 30mm thick including 3 Nos parliamentary SS but Hinges (100mm) and 1No Alluminium Tower bolt (100mm) 1No. Alluminium aldrop 150mm Long 2nos Alluminium Handles (150mm long) including cost and conveyance of all materials labour charges for fixing of fixtures and door frame and shutter in position and all incidental charges etc., complete for finished item of work

Providing and placing on terrace (at all floors levels) polyethylene syntex water storage tank with double layer approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet, outlets and over flow pipes but without fittings and base support for tanks including cost and conveyance of all materials, labour charges etc., complete as per Standard Specifications and as directed by the departmental officers

Supply and fixing of 110mm PVC pipe 4Kg/cm2 including cost and conveyance of all materials and labour charges etc., complete work.

Supply and fixing of 75mm PVC pipe 4Kg/cm2 including cost and conveyance of all materials and labour charges etc., complete work.

Supply and fixing of ASHIRVAD CPVC PIPES and fittings are equal ant for Ht and Cold confirming to IS 15778 : 2007 with malleable specials such as Tees, Elbows, Check nuts, Unions, Bushes, Etc., Solvent cement including fixing in walls ceiling floors include for necessary excavation ion all sorts of soils, chasing in the walls etc., refilling consolidation with the excavated earth and making holes in walls ceiling etc., and making good the chased surface in cement motor and complete. When making a transition use metal threads fittings, including all taxes for finished item of work as directed by the engineer in Charge. 28.60mm OD CPVC Pipe - SDR 13.5

Supply and fixing of ASHIRVAD CPVC PIPES and fittings are equal ant for Ht and Cold confirming to IS 15778 : 2007 with malleable specials such as Tees, Elbows, Check nuts, Unions, Bushes, Etc., Solvent cement including fixing in walls ceiling floors include for necessary excavation ion all sorts of soils, chasing in the walls etc., refilling consolidation with the excavated earth and making holes in walls ceiling etc., and making good the chased surface in cement motor and complete. When making a transition use metal threads fittings, including all taxes for finished item of work as directed by the engineer in Charge. 22.20mm OD CPVC Pipe - SDR 13.5

Supply and fixing of Round Jali UPVC / SWR Pipe fittings, including cost and conveyance of materials, labour charges etc., complete. (BMW-G-121)

Supply and Fixing of 12.7 mm dia NP Pillar cock heavy duty 1st quality Indian make, including cost and coveyance of all materials and all labour charges etc., complete.(BMW-E-28)

Supply and Fixing of 12.7 mm dia NP Push cock 1st quality, including cost and coveyance of all materials and all labour charges etc., complete.(BMW-E-29)

Supply and fixing of 110mm Nahany Trap, including cost and conveyance of all materials and labour charges etc., complete for finished item of work.