Construction of compound wall and modification works at Mountdilli Lighthouse

Amount

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared including cost of all materials, labour, tools & plants etc complete.

Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead, including cost of all materials, labour, tools & plants etc complete.

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge including cost of all materials, labour, tools & plants etc complete.

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix including cost of all materials, labour, tools & plants etc complete.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm including cost of all materials, labour, tools & plants etc complete.

Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m.- Ordinary rock including cost of all materials, labour, tools & plants etc complete.

Providing and laying cement concrete 1:3:6 (One cement, Three M sand and Six graded stone aggregate of 40mm and down size) for foundation including mixing of concrete, laying, compacting, curing etc including supply of all materials, labour, tools & plants etc complete as directed.

Centering and shuttering including strutting, propping etc. and removal of form for : slab, lintel, sunshade, columns, Pillars, Piers, Abutments, Posts and Struts, including cost of all materials, labour, tools & plants etc complete.

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) including supply of all materials, labour, tools & plants etc complete as directed.

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size) including supply of all materials, labour, tools & plants etc complete as directed.

Steel reinforcement for RCC work bend tied and placed in position with tested steel reinforcement bars conforming to relavent ISI specifications inluding supply of all binding wire, cutting, bending, binding etc supply of all materials labour, tools and plants etc complete as directed -Thermo-Mechanically Treated bars of grade Fe-500D or more.

Coursed rubble (Laterite stone) masonry with hard stone (first or second sort) in superstructure above plinth level and upto floor five level.- Masonry work (second sort), in cement mortar 1:6 (1 cement: 6 coarse sand) including supply of all materials, labour, tools & plants,scaffolding ,etc complete as directed.

Providing and laying cement concrete 1:2:4 (1 Cement : 2M sand : 4 graded stone aggregate 20 mm nominal size) in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor,c.c road etc., up to floor five level including cost of all materials, labours ,tools and plants , excluding the cost of centering, shuttering etc .complete .

15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) including cost of all materials, labours ,tools and plants, scaffolding etc .complete as directed.

Providing and fixing Broken glass pieces over coping of compound wall in cement mortar for security purpose including cost of all materials, labour, tools & plants etc complete as directed by Engineer -in- charge, including cost of all materials, labour, tools & plants,scaffolding etc complete.

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. - 60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern, including cost of all materials, labour, tools & plants etc complete.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge), including cost of all materials, labour, tools & plants etc complete.

Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineer-in-Charge including cost of all materials, labours ,tools and plants, scaffolding etc .complete as directed.

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent, including cost of all materials, labours ,tools and plants, scaffolding etc .complete as directed.

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work. including cost of all materials, labours ,tools and plants, scaffolding etc .complete as directed.

Fabricating and fixing cast iron gate fabricated out of 50 mm square bars and 25 mm dia intermediate spherical rods at 150mm c/c as per drawing with all fittings for gate .Painting the exposed surface with synthetic enamel paint two coat over a coat of zinc chromate primer,fixing the gate in pillar with concrete including cost of all materials, labour,tools and plants etc complete as directed.

Main gate of 3.60mx1.80m size

Wicket gate of 1.20mx1.80m size - 2 nos.

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm), to the EXTERIOR wall surface, including cost of all materials, labour, tools & plants etc complete.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over water thinnable cement primer on wall surface having VOC content less than 50 grams/litre, including cost of all materials, labour, tools & plants etc complete.

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc. complete.- On steel work, including cost of all materials, labour, tools & plants etc complete.

Filling available excavated earth/ demolished concrete free from roots & other vegetation including supply at site, carrying by trolly / wheel barrow/ head load, spreading, levelling, compacting using vibrator on the low lying area inside the Lighthouse compound as directed at site including supply of all materials, labour, tools & plants etc complete as directed.

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade Area of slab over 0.50 sqm including cost of all materials, labour, tools & plants etc complete as directed.

Engraving letters in biliungal on hard stone / Granite as per cm height for per letter,emblyum ,border and including cost of all materials, labour, tools & plants ,tyransportation charge etc complete as directed.

Supply and installation of garden bench 4 seater with back support of FRP with side frame of cast iron, decorative type of approved design and make, fixing position in line and level with cement concrete and suitable anchor bolts etc complete including cost of all materials, labour, tools & plants, transportation charge etc complete as directed.

Scrape value for item no 2 including removing from site with all transportation ,loading,unloading and all other charges and cost as directed etc complete.

CIS GLOBAL INFRATECH PVT LTD

JOSEPHNELSON

LUCKY DECOR

Ajayakumar.M.C

SHANKAR ASSOCIATES