Transformation of Sharmistha Lake: Light & Culture at Vadnagar in Gujarat

Providing and laying cement concrete pavement (25mm to 50mm thick) with 1:2:4 (1-cement : 2-coarse sand : 4-stone aggregate 20mm

nominal size) including finishing with floating coat of neat cement complete.

Granular Sub-Base with coarse Graded material (Table 400-2) Construction of granular sub-base by providing coarse graded material,

15 spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC and compacting Cu.m. 20 3190

with vibratory roller to achieve the desired density, complete as per clause

40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand), including

16 pointing with cement mortar 1:2 (1 cement : 2 stone dust) with an admixture of pigment to match the shade of stone. sqm 1 1

Note : Sand stone Finish and color as per the approval of design Consultant. Appropriate prototypes to be provided by the contractor and

get it approved from design Consultant for achieving final look and feel as per consultant / Client before execution (varied options and sizes

to be considered)

Providing and fixing of Paver block M30 Grade 60mm Thick (Coloured)

(Note : Supplying and Fixing of coloured pigmented/custom finish cement based concrete Paver Block as per approved finish and shade as

provided by the consultant. Appropriate prototypes to be provided by the contractor and get it approved from design Consultant for

achieving final look and feel as per consultant / Client before execution.

Providing and fixing of custom etched Paver block with motifs in M30 Grade 60mm Thick (Coloured)

(Note : Supplying and Fixing of coloured pigmented/custom finish cement based concrete Paver Block as per approved finish and shade as

provided by the consultant. Appropriate prototypes to be provided by the contractor and get it approved from design Consultant for

achieving final look and feel as per consultant / Client before execution.

Providing and fixing at work site machine cut Cobble of Granite with approved finish and shade as provide by the consultant of Size

100x100x60-100 mm for Flooring with tolerance not exceeding 10mm & having density of 2800-3000 kg/Cu.m., Including Sand bed 30 mm

thick & 1:4 C.M. cement mortar for filling joints, pointing with cement over joints Curing cleaning complete in all respect and loading,

20 unloading, transportation as directed by Engineer in charge etc. Appropriate prototypes to be provided by the contractor and get it 5

approved from design Consultant for achieving final look and feel as per consultant / Client before execution.

Structure stability is the responsibility of the contractor. The contractor should have in-house structural engineer for the same.

Terrazo Flooring

21 Note : Finish and color as per the approval of design Consultant. Appropriate prototypes to be provided by the contractor and get it sqm 465 2500

approved from design Consultant for achieving final look and feel as per consultant / Client before execution

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth

1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural

Providing and laying in position ready mixed or site batched design mix cement concrete for plein cement concrete work, using coarse

aggregate and fine aggregate derived from natural sources, Portland Pozzolana/ Ordinary Portland /Portland Slag cement, admixtures in

recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without

impairing strength; including pumping of concrete to site of laying, curing, carriage for al leads; but excluding the cost of centering,

23 shuttering and finishing as per direction of the engineer-in-charge; for the following grades of concrete.

Note: Extra cement up to 10% of the minimum specified cement content. in design mix shall be payable separately. In case the cement

content in design mix is more than 110% of the minimum specified cement content, the contractor shall have discretion to either re-design

the mix or bear the cost of extra cement.

Concrete of M25 grade with minimum cement content of 300 kg /Cu.m.

Centering and shuttering including strutting, propping etc. and removal

24 of form for : sqm 59 332

Foundations, footings, bases of columns, etc. for mass concrete

Steel reinforcement for R.C,C, work including straightening, cutting, bending, placing in position and binding al complete upto plinth level.

25 Mild steel and medium tensile PER KG 20,570 91

Thermo-mechinallically treated bars of grade Fe-500D or more

Providing and laying in situ seven course water proofing treatment with APP (Atactic Polypropylene) modified Polymeric memberane over

roof consisting of first coat of bitumen primer @ 0.40 litre per sqm, 2nd, 4th & 6th courses of bonding material @ 1.20 kg/sqm, which shall

consist of blown type bitumen of grade 85/25 conforming to IS : 702, 3rd and 5th layers of roofing membrane APP modified Polymeric

membrane 2.0 mm thick of 3.00 Kg/sqm weight consisting of five layers prefabricated with centre core as 100 micron HMHDPE film

26 sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20 micron HMHDPE film. 7th, the top sqm 150 725

most layer shall be finished with brick tiles of class designation 10 grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2%

integral water proofing compound by weight of cement over a 12 mm layer of cement mortar 1:3 ( 1 cement : 3 fine sand) and finished neat

(item of laying brick tiles shall be paid for separately).

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a

priming coat of approved steel primer all complete.

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width

28 as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer- per Cu.m. 50 158

Providing and laying cement concrete pavement (25mm to 50mm thick) with 1:2:4 (1-cement : 2-coarse sand: 4-stone aggregate 20mm

29 per Cu.m. 50 4229

nominal size) including finishing with floating coat of neat cement complete.

Providing and laying in position ready mixed or site batched design mix cement concrete for plain cement concrete work, using coarse

aggregate and fine aggregate derived from natural sources, Portland Pozzolana/ Ordinary Portland/ Portland Slag cement, admixtures in

recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without

impairing strength; including pumping of concrete to site of laying, curing, carriage for al leads; but excluding the cost of centering,

30 shuttering and finishing as per direction of the engineer-in-charge; for the following grades of concrete. Cu.m. 10 8428

Note: Extra cement up to 10% of the minimum specified cement content. in design mix shall be payable separately. In case the cement

content in design mix is more than 110% of the minimum specified cement content, the contractor shall have discretion to either re-design

the mix or bear the cost of extra cement.

Concrete of M25 grade with minimum cement content of 300 kg /Cu.m.

Centering and shuttering including strutting, propping etc. and removal

31 of form for : sqm 5 350

Foundations, footings, bases of columns, etc. for mass concrete

Steel reinforcement for R.C,C, work including straightening, cutting, bending, placing in position and binding al complete upto plinth level.

Mild steel and medium tensile

32 per kg 800 96

Thermo-mechinallically treated bars of grade Fe-500D or more

12 mm Thick plaster with kankar lime over brick minimum thickness not to be less than 3/8" (10mm) thick including supply of all materials,

33 labour and T&P etc. required for proper completion of the work sqm 20 175

As in item 579 above but with cement and coarse sand mortar(1:6)

12 mm Thick plaster with kankar lime over brick minimum thickness not to be less than 3/8" (10mm) thick including supply of all materials,

34 labour and T&P etc. required for proper completion of the work sqm 10 14

Add for extra labour and material for plaster over rough face of brick walls

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement :

coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) :

8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished

with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate

35 mm nominal size) finished with a floating coat of neat cement complete as per standard design : each 60 11402

Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions,total weight of cover and

frame to be not less than 38 kg(weight of cover 23 kg and weight of frame 15 kg) :

With common burnt clay F.P.S. (non modular) bricks of class designation

Extra for depth for manholes:

36 Size 90x80 cm meter 50 7880

With common burnt clay F.P.S. (non modular) bricks of class designation

Extra for depth for manholes:

37 Size 90x80 cm meter 1,500 180

CC Pigmentted color Saucer Drain (300x600x100mm)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC

plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one

step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

Internal Work - Exposed on Wall

20 mm nominal dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC

plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one

step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

Internal Work - Exposed on Wall

25 mm nominal dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC

plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one

step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

Internal Work - Exposed on Wall

32 mm nominal dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC

plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one

step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

Internal Work - Exposed on Wall

40 mm nominal dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC

plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC

solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in

Charge. Concealed work including cutting chases and making good the walls etc.

15 mm nominal dia Pipes

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V

level in all shapes and sizes in : Cement mortar 1:4(1 cement : 4 coarse sand)

44 cement mortar 1:4 (1 cement : 4 coarse sand) sqm 50 832

15 mm cement plaster on rough side of single or half brick wall or 230 mm of mix :

1:4 (1 cement: 4 coarse sand)

46 Pidilite Concrete and aggregate mix Plaster sqft 6,568 100

Providing & making Gabion structure with Mechanically Woven Double Twisted Hexagonal Shaped Wire mesh Gabion Boxes as per IS

16014:2012,MORTH Clause 2500, of required size, Mesh Type 10x12(D=100 mm with tolerance of ±2%), Zinic+10%Al alloy+PVC coated,

Mesh wire diameter 2.7/3.7mm (ID/OD), mechanically edged/ selvedged with partitions at every 1m interval and shall have minimum

numbers of openings per meter of mesh perpendicular to twist, tying with lacing wire of diameter 2.2/3.2mm(ID/OD), supplied @3% by

weight of Gabion boxes, filled with boulders with least dimension of 200 mm, as per drawing, all complete as per directions of Engineer-in-

Stone Dustbin: Fabrication and supply of Sandstone dustbin with SS bucket having the top of Corten steel/Cast Iron/ Stainless Steel with

required finishing as per the drawing provide by the consultant under instruction of architect. Customized art work as per city branding to

be included in sandstone through CNC /etching/inlay.(Art work to be made by contractor and approved by the design consultant). The

48 graphic to be made by the contractor. This should include appropriate prototypes to be provided by the contractor and get it approved from Nos 6 20000

design Consultant for achieving final look and feel as per consultant / Client before execution. Structure stability is the responsibility of the

contractor. The contractor should have in-house structural engineer for the same. upto 01 meter height, upto 500 x 500 mm.

Concrete Bench: Fabrication and supply of benches as per the drawing provide by the consultant. Customized art work as per city branding

to be included in Concrete through CNC /etching/SS inlay. (Art work to be made by contractor and approved by the design consultant). The

graphic to be made by the contractor. This should include appropriate prototypes to be provided by the contractor and get it approved from

design Consultant for achieving final look and feel as per consultant / Client before execution. Structure stability is the responsibility of the

contractor. The contractor should have in-house structural engineer for the same.

Sand Stone Bench: Fabrication and supply of sandstone benches as per the drawing provide by the consultant. Customized art work as per

city branding to be included in sandstone through CNC /etching/SS inlay. (Art work to be made by contractor and approved by the design

consultant). The graphic to be made by the contractor. This should include appropriate prototypes to be provided by the contractor and get

it approved from design Consultant for achieving final look and feel as per consultant / Client before execution. Structure stability is the

responsibility of the contractor. The contractor should have in-house structural engineer for the same.

Sand Stone Signage: Providing and fixing in Position of sandstone signage of sizes upto 3.0m x 3.0m with metal/Corten steel/ ss as jacket &

inlay as approved design under instruction of architect. The jacket should have lighting fixture include in the cost. The light should be

enough to make in text visible at night with equal wash all over the signage. The fixture (grazer, LED strip, any other fixture) should IP

rated, with inbuilt driver and should be fixed in theft proof way. Shop drawing need to be provided by the contractor. The text needs to be

51 inlay/ UV print/ CNC / etching/ engraving as per design consultant. Text size need to be visible from road/ pedestrian pathway. Structure Nos 1

stability and longivity of the signage content is the responsibility of the contractor including waterproofing/lamination/lacquer as per

requirement. The contractor should have in-house structural engineer for the same. This should include appropriate prototypes to be

provided by the contractor and get it approved from design Consultant for achieving final look and feel as per consultant before execution.

(The item Customized as per city branding /art work to be included in stone through CNC /etching/inlay).

Providing and fixing in Position of sandstone/concrete/MS signage of sizes 1.2 x 2.4 m/ 1.2 x 3.6 m/ 1.2 x4.8m/ 1.2 x 6.0 m with Mild Steel/

Corten steel/ Stainless Steel jacket as approved design under instruction of architect. The jacket should have lighting fixture include in the

cost. The light should be enough to make in text visible at night with equal wash all over the signage. The fixture should IP 65 rated and

should be fixed in theft proof way. Shop drawing need to be provided by the contractor. The text needs to be inlay with another stone of

52 visible color. Text size need to be visible from road/ pedestrian pathway. Structure stability is the responsibility of the contractor. The Nos 1 226520

contractor should have in-house structural engineer for the same. This should include appropriate prototypes to be provided by the

contractor and get it approved from design Consultant for achieving final look and feel as per consultant / Client before execution. (The item

Customized as per city branding /art work to be included in stone through CNC / etching/ inlay).

SITC of profile light/grazer light for signage with appropriate provision as per approved drawing including theft protection which include the

53 cost of wiring, all mounting accessories. The shop drawing to be provided by the contractor. This should include appropriate prototypes to Nos 8 15000

be provided by the contractor and get it approved from design Consultant for achieving final look and feel as per consultant / Client before

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/

appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia

and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/

neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including

54 cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings kg 976 474

and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :

Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc.

complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic

With float glass panes of 5. mm thickness

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings

wherever required including the cost

of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)

Powder coated aluminium (minimum thickness of powder coating 50 micron)

57 SHIFTING OF ELECTRIC POLE AND CARRYING TO THE DEPARTMANTAL STORES (High Mast) Nos 1 70000

3M pole and light

Light Fixture: LED Street light fixture, powder coated pressure die cast aluminium body (System lumen efficacy >135 lm/Watt).

Supplying, Installation, Testing & Commissioning of Street light LED fixture, powder coated pressure die cast aluminium body with built in or

separate driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp

50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-

66,IK-10, CRI >70, under voltage and over voltage protection, EMI-EMC as per CISPR-15, lenses for beam angle as per IESNA type I/II/III as

per the width of the road

and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED,Driver & electrical circuitary) of minimum 50000 Burning

Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K

58 /6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the Nos 12 24500

specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR,

PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy

>135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT

shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED

junction temperature shall not rise above 90°C).The above fixture needs to be branded Aura/ Unilamp/ DW Windsor/Signigy or

equivalent.This should include appropriate prototypes to be provided by the contractor and get it approved from design Consultant for

achieving final look and feel as per consultant / Client before execution.

Pole :Supply of flange mounted upto 3 mtr long hot dip galvanised PU coated of approved color CONICAL/cylindrical/or desired shape &

design poles with 150 mm bottom A/F & 75 mm top A/F made up of 3 mm thick HT sheet along with base plate of size 240X240X12mm

with maximum wind speed of 169 Km/hr as required. The pole top shall be complete with 300 mm long single arm bracket at upto 3M with

a tilt of 10 degree with tightening bolts as required. The following may be housed in the window provided for cable termination including

their supply and fixing: : 6mm thick laminated mounting sheet of suitable size inside the window by providing and welding three No GI

59 strips; 4 mm thick of suitable length and having suitable size tapped holes - 10 nos. as required. : 1 No. : A set of 20 Amp brass neutral link, Nos 12 17000

2 way copper bus bar on existing laminated sheet : 1 Set. : 4 way, 32 Amp heavy duty terminal block suitable for 10 sq. mm conductor-

2nos. and shorting links (4nos.) on DIN channel of suitable length - on the existing laminated sheet. : Earth stud welded at suitable height

with two nos. washer, spring washer & nuts. : 2 Nos. : 4 Nos. (20mm dia x 470mm long) G.I foundation bolts with nuts No The pole will also

include accessary lighting as per City Branding scheme.

60 Streetlight Footing- Cast in situ RCC of appropriate size as per approved design by consultant casted in M25 concrete mix. Nos 16 32603

Stone Pedestal:Cast in situ concrete/metal base of up to 2.4 m height as per approved design. The outer surface needs to be coated with

matt finish sealer. The Concrete/Metal Pedestal cladded with sandstone: (Dry/Wet Cladding) Cast in situ concrete Pedestal of up to 2.4 m

cladded with 20 mm thick sandstone as per the as per drawing provided by the consultant and fixing sandstone pedestal as per approved

design under instruction of architect. (Customized as per city branding /art work to be included in stone through CNC /etching/inlay)

61 Structure stability is the responsibility of the contractor. The contractor should have in-house structural engineer for the same. Shop Nos 12 45392

drawing need to be provided by the contractor. This should include appropriate prototypes to be provided by the contractor and get it

approved from design Consultant for achieving final look and feel as per consultant / Client before execution. Inclusion of lighting detail,

fixture as per City Branding Scheme

6M Light and pole

Light Fixture LED Street light fixture, powder coated pressure die cast aluminium body (System lumen efficacy >135 lm/Watt).

Supplying, Installation, Testing & Commissioning of Street light LED fixture, powder coated pressure die cast aluminium body with built in or

separate driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp

50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-

66,IK-10, CRI >70, under voltage and over voltage protection, EMI-EMC as per CISPR-15, lenses for beam angle as per IESNA type I/II/III as

per the width of the road

and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED,Driver & electrical circuitary) of minimum 50000 Burning

Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K

62 /6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the Nos 4 30000

specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR,

PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy

>135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT

shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED

junction temperature shall not rise above 90°C).The above fixture needs to be branded Aura/ Unilamp/ DW Windsor/Signigy or

equivalent.This should include appropriate prototypes to be provided by the contractor and get it approved from design Consultant for

achieving final look and feel as per consultant / Client before execution.

Pole : Supply of flange mounted upto 6 mtr long hot dip galvanised PU coated of approved color CONICAL/cylindrical/or desired shape &

design poles with 150 mm bottom A/F & 75 mm top A/F made up of 3 mm thick HT sheet along with base plate of size 240X240X12mm

with maximum wind speed of 169 Km/hr as required. The pole top shall be complete with 300 mm long single arm bracket at upto 6M with

a tilt of 10 degree with tightening bolts as required. The following may be housed in the window provided for cable termination including

their supply and fixing: : 6mm thick laminated mounting sheet of suitable size inside the window by providing and welding three No GI

63 strips; 4 mm thick of suitable length and having suitable size tapped holes - 10 nos. as required. : 1 No. : A set of 20 Amp brass neutral link, Nos 4 24573

2 way copper bus bar on existing laminated sheet : 1 Set. : 4 way, 32 Amp heavy duty terminal block suitable for 10 sq. mm conductor-

2nos. and shorting links (4nos.) on DIN channel of suitable length - on the existing laminated sheet. : Earth stud welded at suitable height

with two nos. washer, spring washer & nuts. : 2 Nos. : 4 Nos. (20mm dia x 470mm long) G.I foundation bolts with nuts No. Inclusion of

lighting detail, fixture as per City Branding Scheme

Stone Pedestal: Cast in situ concrete/metal base of up to 2.4 m height as per approved design. The outer surface needs to be coated with

matt finish sealer. The Concrete/Metal Pedestal cladded with sandstone (Dry/Wet Cladding): Cast in situ concrete Pedestal of up to 2.4 m

cladded with 20 mm thick sandstone as per the as per drawing provided by the consultant and fixing sandstone pedestal as per approved

64 design under instruction of architect. (Customized as per city branding /art work to be included in stone through CNC /etching/inlay) Nos 4 45392

Structure stability is the responsibility of the contractor. The contractor should have in-house structural engineer for the same. Shop

drawing need to be provided by the contractor. This should include appropriate prototypes to be provided by the contractor and get it

approved from design Consultant for achieving final look and feel as per consultant / Client before execution.

Bright spot light BGP-150, LED 250/WW,6 watt,20 as per Decor. Colour Temp. as per design consultant. The above fixture needs to be

branded NERI/Unilamp/DW Windsor or equivalent. This should include appropriate prototypes to be provided by the contractor and get it

approved from design Consultant for achieving final look and feel as per consultant / Client before execution.

Floor lights LED, 1Watt, IP-67,40 lumen output, warm white, Colour Temp. as per design consultant. The above fixture need to be branded

NERI / Unilamp / DW Windsor or equivalent. This should include appropriate prototypes to be provided by the contractor and get it

approved from design Consultant for achieving final look and feel as per consultant / Client before execution.

Sand Stone/ Custom Casted Concrete Bollard: Fabrication and supply of Bollard having height up to 900mm, Thickness up to 200 mm on

both sides. Installation of bollard on existing surface is included (as approved design under instruction of architect.) including footing as per

the drawing Customized art work as per city branding to be included in stone/ concrete through CNC /etching/inlay (Art work to be made

67 by contractor and approved by the design consultant). Structure stability is the responsibility of the contractor. The contractor should have Nos 10 13650

in-house structural engineer for the same. This should include appropriate prototypes to be provided by the contractor and get it approved

from design Consultant for achieving final look and feel as per consultant / Client before execution.

Sand Stone/ Concrete Single LIght light Bollard: Fabrication and supply of Bollard having height up to 900mm, Thickness up to 200 mm on

both sides. Installation of bollard on existing surface is included (as approved design under instruction of architect.) including footing as per

the drawing Customized art work as per city branding to be included in stone through CNC /etching/inlay (Art work to be made by

68 contractor and approved by the design consultant). Structure stability is the responsibility of the contractor. The contractor should have in- Nos 5 20000

house structural engineer for the same. This should include appropriate prototypes to be provided by the contractor and get it approved

from design Consultant for achieving final look and feel as per consultant / Client before execution.

Sand Stone/ Concrete Double LIght light Bollard: Fabrication and supply of Bollard having height up to 900mm, Thickness up to 200 mm on

both sides. Installation of bollard on existing surface is included (as approved design under instruction of architect.) including footing as per

the drawing Customized art work as per city branding to be included in stone through CNC /etching/inlay (Art work to be made by

69 contractor and approved by the design consultant). Structure stability is the responsibility of the contractor. The contractor should have in- Nos 5 25000

house structural engineer for the same. This should include appropriate prototypes to be provided by the contractor and get it approved

from design Consultant for achieving final look and feel as per consultant / Client before execution.

70 Step Light @2m c/c, LVL 300 from F.F.L(Waterproof Profile Light) Nos 100 3500

Supply & install Slim Edge LED Profile Strip Light (5m) with aluminium profile & diffuser (protected location) including cable & driver

Supply, Installing testing and commissioning of Street Light Distribution Board comprising of the following :

1 no 100 A 4P MCB as incomer

1 no 100 A 4P Contactor (230 V coil)

1 no selector switch to select automatic or manual operation

1 set of ON/OFF push buttons for manual operation

72 1 no L & T timer TSQ - ST (daily dial - 1x 24 Hours) set 2 85000

12 nos. 16 A DP MCB’s (10 KA breaking capacity) as outgoings

200 A TPN Copper busbar.

All interconnections and wiring as required for automatic ON and OFF operation of the SLD.

2 mm thick M.S. sheet metal Cubicle Board as per specifications mentioned elsewhere in the doCu.m.ent complete, including earthing as

Street Light DB as described above complete

Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm

below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the

73 cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring rm 1,000 295

of the cable shall be properly connected with the earth conductor

Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm

below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the

74 cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring rm 1,000 448

of the cable shall be properly connected with the earth conductor

Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including

rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-

Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including

rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-

Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection

77 etc. complete in all respect as per direction of the EngineerIncharge. Nos 500 15

Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection

78 etc. complete in all respect as per direction of the EngineerIncharge. Nos 300 32

Earthing with G.I. earth pipe 4.5 m long ,40mm dia including accessories , and providing masonry enclosure with cover plate having locking

arrangement and watering pipe etc. with charcoal and salt as required

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain

wiring/cable as required.

81 Fishtail palm of ht. 270-300 cm bottom girth 40-50 cm well developed in big size HDPE bags. Nos 400 491

Supply and stacking of Foxtail palm plant of ht. 240-270 cm bottom girth 35-40 cm well developed in big size HDPE bags as per direction of

the officer-in-charge.

Providing and fixing M.S. flat iron tree guard 60 cm dia and 2 m high, above ground consisting 4 nos 25 x 6 mm, 2.25 m long and 8 nos 25 x

3 mm 2 m long verticals M.S. flats, riveted to 3 nos 25 x 6 mm M.S. flat iron rings in two halves, fixing together at site with required six

numbers of 8 mm dia and 30 mm long bolts, including painting two coats with synthetic enamel paint of approved brand and manufacture

83 over a coat of primer. One name Nos 50 4047

plate of 1 mm thick M.S. sheet of size 250x100 mm shall be welded to the tree guard near the middle height and lettered CPWD / PWD/

any other approved name. The tree guard shall be suitably fixed to the ground by embedding four legs of tree guard in pits of suitable dia

and to a depth of 25 cm, refilling the pits with soil and ramming, complete in all respect as per satisfaction and direction of Officer-in-

Cast Iron/ M.S. Powder Coated with Custom Design Tree Grate of 1200mm x 1200mm with approved size punched holes sheet is to be

welded to MS Angel granting edge and of 40 mm thickness/ as per approved design.

Surface treatment: Hot-dip galvanizing, paint or other anti-corrosive coatings shall be fixed to the ground as per approved design under

instruction of architect.

Transplantation of trees with in a distance of 2km including excavation around existing tree, pruning of branches, lifting, loading and

transportation of existing tree, digging pits for placing tree at new place, adding manure, sand, fertilizer, hormones and bio fertilizer to it.

Levelled and neatly dressed and disposal of surplus materials from old existing and new sites to designated place. Each tree should be firmly

85 secured to the stake so as to prevent excessive movement, flooding with water, treatment of roots, rope and gunny bags as per direction of each 25 5050

the officer incharge. T&P and all required

materials shall be arranged by the contractor and nothing extra shall be paid on this account.

(a) Girth of tree shall be measured at a height of 1m above ground level

Girth of trees beyond 50cm and upto 90cm

Transplantation of trees with in a distance of 2km including excavation around existing tree, pruning of branches, lifting, loading and

transportation of existing tree, digging pits for placing tree at new place, adding manure, sand, fertilizer, hormones and bio fertilizer to it.

Levelled and neatly dressed and disposal of surplus materials from old existing and new sites to designated place. Each tree should be firmly

86 secured to the stake so as to prevent excessive movement, flooding with water, treatment of roots, rope and gunny bags as per direction of each 25 9082

the officer incharge. T&P and all required

materials shall be arranged by the contractor and nothing extra shall be paid on this account.

(a) Girth of tree shall be measured at a height of 1m above ground level

Girth of trees beyond 90cm and upto 150cm

Supplying and stacking of good earth at site including royalty and carriage upto 5 k.m. lead complete (earth measured in stacks will be

reduced by 20% for payment).

Supplying and stacking at site dump manure from approved source, including carriage upto 5 k.m. lead complete (manure measured in

stacks will be reduced by 8% for payment) :

Providing and laying Neelgiri/Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and

ramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light waterning with

sprinkler and maintenance for 30 days or more till the grass establish properly, as per direction of officer-in-charge.

Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm,

refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth

after reduction by 20% : one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if

necessary, watering and finally fine dressing, leveling etc. including stacking and disposal of materials declared unserviceable and surplus

earth by spreading and leveling as directed, within a lead of 50 m, lift up to 1.5 m complete (cost of sludge, manure or extra earth to be paid

for separately)

Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge

91 (excluding cast of plant & water) each 1,000 2

Providing and stacking of Bougainvillea (Variety Butiana, Lady Mary Baring, Mahara,Mohan,Scarlet Queen, Variegated, Glabra Formosa,

92 Peruviana Odissi, Paratha, Subhra,Thimma, Spectabilis L.N Birla, Refulgens) of height 30 cm. to 45 cm. with 2-3 branches in 20 cm size of each 1,000 36

Earthen pots / Plastic pots & as per direction of the officer-in-charge

Geo textile fabric above retaining wall to retain soil at slope for grass growth -geotextile fabric used below soil for plantation, non-woven or

woven polypropylene fabric, typically with a GSM (grams per square meter) between 120-205, depending on the application. The fabric

should be permeable, allowing water and air to pass through while preventing soil erosion and weed growth.

Providing and stacking of Delonix regia (Gulmohar) of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-

Providing and stacking of Azadirachta indica ( Neem ) of height 120-130cm in big polybag of size 25 cm as per direction of the officer-in-

Providing and stacking of Alstonia scholaris of height 150-165 cm. in bag of size 25 cm as per direction of the officer-in-charge

Providing and stacking of Cassia fistula (Amaltash) of height 120-135 cm. in big poly bags of size 25 cm as per direction of the officer-in-

Providing and stacking of Plumeria alba dwarf of height 90-105 cm. with 3-4 branches and thick stem in big size HDPE bags as per direction

of the officer-in-charge

Providing and stacking of Plumeria rubra of height 120-150 cm. with 3-4 branches and thick stem in big size HDPE bags as per direction of

thofficer-in-charge

Providing and stacking of Peltophorum species of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.

Providing and stacking of Grevillea robusta (Silver Oak) of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-

Providing and stacking of Lagerstroemia thorelli of height 150-165 cm.in big poly bag of size 25 cm as per direction of the officer-in-charge

Providing and stacking of Hibiscus variegated of height 60-75 cm. with 8 -10 branches and healthy variegated foliage in cement pots of size

35 cm as per direction of the officer-in-charge

Providing and stacking of Hibiscus rosasinensis of height 90-105 cm., bushy in big size HDPE bag as per direction of the officer-in-charge.

Providing and stacking of Jatropha multifida (red colour) of height 60-75 cm. multibranched in p.bag of size 25 cm as per direction of the

officer-in-charge.

Providing and stacking of Tecoma stans of height 90-105 cm. bushy in big size HDPE bag as per direction of the officer-in-charge

Providing and stacking of Tabernaemontana divaricata (Chandni double) of height 90-105 cm., bushy in big size HDPE bag as per direction

of the officer-in-charge.

Providing and Displaying Furcaira variegated well developed with fresh & healthy foliage 8 to 10 leaves in 30 cm Earthen Pot as per

direction of the officer-in-charge.

Providing and stacking of Plumbego capensis well developed with fresh and healthy 30 to 45 cm ht., with bloom in 20 cm Earthen

Pot/Plastic Pot as per direction of the officer-in-charge.

Providing and stacking of Euphorbia pulcherrima (dark red) well branched (poinsettia Red Hegg) of height 60-75 cm. in earthen pots of size

25 cm as per direction of the officer-in-charge.

Providing and Displaying Acalypha red well developed with fresh & healthy 30 to 45 cm ht. in 20 cm size Earthen Pot/ Plastic Pot as per

direction of the officer-in-charge.

112 Shifting of existing trees to nearby suitable location With similar soil condition , complete in all aspects . each 10 2500

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC

plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of

joints complete as per direction of Engineer in Charge.

20 mm nominal dia Pipe

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC

plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of

joints complete as per direction of Engineer in Charge.

25 mm nominal dia Pipe

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :

20 mm nominal dia Pipe

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :

25 mm nominal dia Pipe

Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I.

surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone

aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate

40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of

neat cement complete as per standard design :

With common burnt clay F.P.S.(non modular) bricks of class designation

HYDROPNEUMATIC PUMP FOR LANDSCAPE/FLUSHING WATER SUPPLY

Supply, Installation, testing & commissioning of package type Skid mounted variable speed hydropneumatic system comprising of: Vertical,

inline multistage centrifugal pumping set with stainless steel SS-304 stage casing and SS-304 impellers with stainless steel SS-316L shaft as

per IEC standards with G.I. (Heavy Duty) discharge & suction header with required branch connection & connected to TEFC ventilated

induction motor of 2 pole, 2900 RPM, suitable for 400/440 Volts, 3 phase, 50 Hz A.C. supply No. of Pumps as described below: Pressure

vessel of non corrosive FRP composite construction lined with NSF and/or FDA listed material, like high density polyethylene with fully

replaceable polyurethane. Air cell burst pressure of minimum of 5 times the vessel operating pressure and cycle tested for 2,50,000 cycles.

No. and capacity of Pressure Vessel – 1 No. x 200 Ltrs or as per manufacturer requirement. Control Panel with programmable logic

controller (PLC) with time control unit for cyclic operation of pumps. Pump working sequence should change after every operation.

Contactor overload relays and MCBs should confirm to IEC 898–1995/specifications. Blinking indications for pumps start, trip, low level trip,

118 health supply should be provided in the panel along with the ammeter & voltmeter. Control panel should also consist of cooling fan. set 1 726835

Pressure switches bellow type fitted with micro switch and having maximum pressure and differential scale should confirming BS-6134

standards and IP55 protection class.

Ball valves to be used should be Hot Pressed brass OT-58 with stainless steel ball and P.T.F.E seal and O-Ring. NRVs to be used should be

with Springs and O-Ring arrangement. Complete set (Factory Fitted) including all necessary suction and delivery valves and accessories,

including stainless steel flanges with 3 mm thick rubber insertion, nuts, bolts and washers, NRV, heavy duty expansion bellow & Pressure

Gauge at delivery side as required with the system to be mounted on a common base frame on RCC foundations as per requirement and

each pump set effeciency should be not less than 65% & shall have following duty: Capacity /Flow rate : 3.5 Cu.m. / hr Pumping Head

Mts 1 Set = 2 Nos. Pump (1 Working+1 Standby) Capacity : 1m3/Hour of Each Pump

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the

119 proportion of 1:2 (1 cement : 2 fine sand) including testing of joints rm 150 472

etc. complete :

Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and stacking of useful materials and disposing off the

120 excavated stuff upto 50 Meter lead.(B) Dense or Hard soil (Required for foundation preparation, levelling, and local excavation near the cu.m. 50 161

retaining wall to accommodate RCC footings and seating base levels.)

Providing and laying controlled cement concrete M.250and curing complete excluding the cost of formwork andreinforcement for

121 reinforced concrete work in (A)Foundations, footings, Base of columns and Mass concrete. (Used for foundations, base slabs, and mass cu.m. 55 4193

concrete portions to safely transfer seating loads to the ground and existing retaining structure)

Providing and Laying controlled cement concrete M.150 and finishing smooth with curing etc. complete including the cost of formwork but

excluding the cost of reinforsement for R.C.C work in (iv) Slabs having more than 13 cm and upto 15 cm thickness (Applied for RCC seating

tiers/ slabs of controlled thickness, forming the

primary seating platforms)

123 Mild Steel Bars (Essential for structural integrity of RCC seating, slabs, and connections with the retaining wall) quintal 100 4451

Providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc. Height

of propping and centering below supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and

124 plain concrete work in. (B) Flat surfaces such as soffits of supspened floors slabs Landings and the like. (1) Floors etc. upto 200 mm in sq. m. 600 250

thickness. (Required for shuttering of RCC seating steps, slabs, and flat surfaces to achieve proper alignment and finish)

(i) Supplying of murrum / binding materials (Used for sub-base preparation, leveling, and filling behind seating

tiers to ensure stability and drainage)

Supplying of screened cleaned pea (rounded) gravel of following sizes)(i) 10mm nominal size. (Utilized in concrete mixes and drainage layers

where required behind the retaining wall/seating structure)

Providing and fixing mild steel dowel bars of minimum 32mm dia. for anchoring by drilling holes in foundation strata including necessary

bending, hooking of dowel bars and grouting the holes complete as per detailed drawing and as directed. (A critical item for anchoring the

new RCC seating structure into the existing stone masonry retaining wall, ensuring composite structural behavior and preventing slippage

Filling in foundation and plinth with brick Bats Chhara in layers of 20cm. thickness including watering, remming and consolidating etc.

128 complete. (Used for filling in plinth and voids behind seating tiers, providing economical and effective consolidation) cu.m. 20 595

Providing and laying natural stone slabs (Kota / Granite / Basalt) 20–25 mm thick in floors, treads of steps and landings over 20 mm thick

cement mortar bed 1:6 (1 cement : 6 coarse sand), joints filled with matching cement slurry, including curing, cutting, finishing and all leads

129 and lifts, complete. (Adopted as the finished seating surface for durability, anti-skid properties, and ease of maintenance in public-use sq. ft. 7,400 85

seating areas.)

Steel work, welded in built up sections framed work including cutting, hoisting, fixing in position and applying a priming coat of red lead

paint. (A)In beams and joists, channels angles Tees, flats, with connecting plates or angle cleats as in main and cross beams. Hip and jack

rafters, purlins conneted to common rafters and the like. (Required where steel members are needed for edge supports, railing fixings, or

localized framing elements associated with seating)

Concrete curing, testing & lab charges (allowance) (1. Concrete curing, testing, and laboratory charges are included as an allowance to

131 ensure quality control. 2. Mobilization and site establishment cover preliminary arrangements, tools, manpower, and safety measures.) L.S. 1 1

Mobilization, site establishment (1. Concrete curing, testing, and laboratory charges are included as an allowance to ensure quality control.

132 2. Mobilization and site establishment cover preliminary arrangements, tools, manpower, and safety measures.) L.S. 1 1

Providing, Fixing and Erecting of 05 Nos of Kiosks of size upto 05 x 02 meters and height of upto 03 meters. The Kiosk will be erected on a

150 mm high R.C.C. plinth of custom color of pigmented concrete. With the structural framework made up of 50 x 50 mm M.S. hollow

sections, with appropriate wedling and fixing mechanisms, finished with Anti- rust paint and treatments. The interior finish is to be Gypsum

Panels with Paint of color as per the Design Consultant. The exterior finish is to be of wooden planks of size 150 mm wide and thickness

upto 25 mm, with appropriate anti- termite treatment, finished with polish as per Design Consultant. The Serving counters are to be made

of Pinewood of thickness upto 30 mm, with appropriate anti- termite treatment, final finish matching the exterior finish of kiosk/ as per

Design Consultant. The working Counters are to be made of Stainless Steel/ Granite of appropriate thickness. The kiosk also asks for

133 provision of Electrical, Plumbing and Drainage, as per drawings. The Contractor is responsible to coordinate with the Client/ Authority for job 1 3659214

the providing of any Services that need to be executed till the provisions. The cost also includes, providing Electrical Switch/ Sockets, Ceiling

Recessed and above Counter Ceiling Suspended Lights and LED Strip Lights, Fire Extinguishers, Water supply and drainage pipes, fixtures

and floor trap, with all necessary cabling and conduiting required to run the kiosk efficeintly. The custom design door and windows of the

Kiosks are foldable/ removable with appropriate locking mechanism, and finish as per Drawings and approval from Design Consultant.

Appropriate Water Proofing, Insulation, Treaments to be taken into the cost. The contractor to provide all shop drawings related to

Structure (vetted with contractor's in- house Structural Consultant and 03rd Party investigations), Services for approval of Execution of

Supplying , Providing and installing of SS tubes and sheets to make crawl-through-tunnels and slides to be fixed in ground of diameter upto

134 900 mm of grade 304 for Outdoor purposes, of appropriate thickness to sustain soil load, dead load, of finish as per Design Consultant kg 500 230

Providing, forming and constructing children’s play mounds of required organic shapes and heights using selected earth including

excavation, filling, compaction, dressing, contouring and finishing; p providing surface finish with artificial turf / natural grass turf over

135 mounds; providing timber / WPC deck pathway, stepping pods and balance logs; providing plantation, lawn development and landscaping sq. m. 245 3000

around the play area;; providing safety signage, all fittings, foundations, testing, commissioning, finishing and handing over complete, as

per drawings, specifications and direction of Engineer-in-Charge.

Branding Sculpture:

Design, fabrication, supply, installation, and fixing of 2D/ 3D signage sculpture artwork of length 15- 20 meters, height 10 meters and 450 -

600 mm thick, at location shown on drawing or as directed, with Story Plaque with graphics and text in both languages (Hindi and English)

based on the approved concept and design, fabricated from Mild Steel (MS)/ Corten Steel (CS)/ Agra Mandana Stone/ Pigmented Concrete/

Stainless Steel (SS) and Brass inserts with desired coating in upto 20 % of the surface area of outdoor grade , including CNC/ laser-cut/

bending and moulding components, sculpture base finished with PU paint, Mirror Finish/ Hammer Finish/ stone/ concrete, complete with

all necessary supporting framework, anchors, fasteners, and hardware suitable for site conditions and manufacturer’s specifications;

including preparation and submission of shop drawings, fabrication and installation details in consultation with the Installation/ Sculpture

Artist, with structural design verification, calculations, and certification by the Contractor’s team Structural Engineer and 03rd Party

investigation to ensure structural stability, production quality, and execution finesse; including approved surface preparation and finishes

such as primers, protective coatings, paints, sealers, or treatments to achieve abrasion resistance, durability, and visual quality as approved

136 by the Design Consultant; including prototyping and sampling of materials, finishes, and workmanship for approval by the Design job 1 5808400

Consultant/ Client prior to execution; including transportation, handling, erection, alignment, fixing, adjustments, cleaning, protection, and

completion of the works, all complete in every respect in accordance with drawings, specifications, site conditions, and instructions of the

Engineer/ Design Consultant, including provision, installation, testing, and commissioning of appropriate integrated lighting systems such as

LED strip lights, grazers, spot lights of exterior grade and quality and other fixtures necessary to higlight the Branding Sculpture, complete

with IP65- rated fittings, wiring, drivers, controls, anti-theft arrangements, and accessories; including all research, doCu.m.entation,

statutory approvals, and approvals from relevant authorities as required; and including the cost of Operations and Maintenance for the

period of upto 05 years/ as specified in the Tender DoCu.m.ents, complete and functional in every respect. The job includes all necessary

prototyping, sampling, testing on all levels, and to initiate execution approvals to be taken from the Design Consultant.

Interactive Sculpture: Pashchim Mehta ni Vav (Functional Stepwell Sculpture)

Providing, fabricating, supplying, installing, testing and commissioning of one (01) no. full-scale, interactive, functional stepwell-inspired

sculpture representing Pashchim Mehta ni Vav, Vadnagar, with continuous flowing water system drawing water from Sharmishtha Lake and

returning it back to the lake as required for the functioning of the sculpture, including complete design, civil works, RCC foundations,

sculpture fabrication using approved natural stone / pigmented concrete/ Stainless Steel/ Mild Steel, waterproofing, plumbing, pumps,

motors, filtration system, concealed piping, electrical works, testing, commissioning, doCu.m.entation and defect liability period as per

tender doCu.m.ents, complete in all respects as per approved drawings and directions of the Design Consultant, complete with all necessary

supporting framework, anchors, fasteners, and hardware suitable for site conditions and manufacturer’s specifications; including

preparation and submission of shop drawings, fabrication and installation details in consultation with the Installation/ Sculpture Artist, with

structural design verification, calculations, and certification by the Contractor’s in-house Structural Engineer and 03rd Party Investigations

to ensure structural stability, production quality, and execution finesse; including approved surface preparation and finishes such as

137 primers, protective coatings, paints, sealers, or treatments to achieve abrasion resistance, durability, and visual quality as approved by the Each 1 615953

Design Consultant; including prototyping and sampling of materials, finishes, and workmanship for approval by the Design Consultant/

Client prior to execution; including transportation, handling, erection, alignment, fixing, adjustments, cleaning, protection, and completion

of the works, all complete in every respect in accordance with drawings, specifications, site conditions, and instructions of the Engineer/

Design Consultant, including provision, installation, testing, and commissioning of appropriate integrated lighting systems such as LED strip

lights, grazers, Spot Lights of exterior grade and quality and other fixtures necessary to higlight the Interactive Sculpture, complete with

IP65-rated fittings, wiring, drivers, controls, anti-theft arrangements, and accessories; including all research, doCu.m.entation, statutory

approvals, and approvals from relevant authorities as required; and including the cost of Operations and Maintenance for the period

specified in the Tender DoCu.m.ents, complete and functional in every respect. The job includes all necessary prototyping, sampling, testing

on all levels, and to initiate execution approvals to be taken from the Design Consultant.

Interactive Sculpture: Vadnagar Integrated Water Management System (Working Hydraulic Sculpture)

Providing, fabricating, supplying, installing, testing and commissioning of one (01) no. interactive, scaled miniature working and having the

waterflow systems visible, model demonstrating the historic integrated water management system of Vadnagar, including lakes, kunds,

stepwells, channels and functional interactive sluice gates allowing visible control of water flow, with continuous water circulation from and

back to Sharmishtha Lake, including research, design, sculpture fabrication in approved natural stone / pigmented concrete / SS / MS,

hydraulic systems, pumps, motors, filtration, plumbing, electrical works, civil foundations, waterproofing, installation, testing,

commissioning, operation & maintenance manuals and defect liability period as per Tender DoCu.m.ent, complete in all respects. complete

with all necessary supporting framework, anchors, fasteners, and hardware suitable for site conditions and manufacturer’s specifications;

including preparation and submission of shop drawings, fabrication and installation details in consultation with the Installation/ Sculpture

Artist, with structural design verification, calculations, and certification by the Contractor’s in-house Structural Engineer and 03rd Party

investigations to ensure structural stability, production quality, and execution finesse; including approved surface preparation and finishes

138 such as primers, protective coatings, paints, sealers, or treatments to achieve abrasion resistance, durability, and visual quality as approved Each 1 615953

by the Design Consultant; including prototyping and sampling of materials, finishes, and workmanship for approval by the Design

Consultant/ Client prior to execution; including transportation, handling, erection, alignment, fixing, adjustments, cleaning, protection, and

completion of the works, all complete in every respect in accordance with drawings, specifications, site conditions, and instructions of the

Engineer/ Design Consultant, including provision, installation, testing, and commissioning of appropriate integrated lighting systems such as

LED strip lights, grazers, Spot Lights of exterior grade and quality and other fixtures necessary to higlight the Interactive Sculpture, complete

with IP65-rated fittings, wiring, drivers, controls, anti-theft arrangements, and accessories; including all research, doCu.m.entation,

statutory approvals, and approvals from relevant authorities as required; and including the cost of Operations and Maintenance for the

period specified in the Tender DoCu.m.ents, complete and functional in every respect. The job includes all necessary prototyping, sampling,

testing on all levels, and to initiate execution approvals to be taken from the Design Consultant.

Interactive Sculpture: Jhunjhunia Kuan (Acoustic Water Well Sculpture) Providing, fabricating, supplying, installing, testing and

commissioning of one (01) no. interactive, scaled miniature sculpture inspired by Jhunjhunia Kuan, Vadnagar, recreating the characteristic

sound phenomenon through controlled water movement, including manual water drawing system for public interaction, acoustic sound-

generating mechanisms, visible water return into stream and/or lake, continuous water circulation system from and back to Sharmishtha

Lake, sculpture fabrication in approved natural stone / pigmented concrete / SS / MS, civil foundations, waterproofing, plumbing, pumps,

motors, filtration, electrical works, testing, commissioning, doCu.m.entation and defect liability period mentioned in the Tender

DoCu.m.ent, complete in all respects complete with all necessary supporting framework, anchors, fasteners, and hardware suitable for site

conditions and manufacturer’s specifications; including preparation and submission of shop drawings, fabrication and installation details in

consultation with the Installation/ Sculpture Artist, with structural design verification, calculations, and certification by the Contractor’s in-

house Structural Engineer and 03rd Party Investigations to ensure structural stability, production quality, and execution finesse; including

approved surface preparation and finishes such as primers, protective coatings, paints, sealers, or treatments to achieve abrasion

139 resistance, durability, and visual quality as approved by the Design Consultant; including prototyping and sampling of materials, finishes, Each 1 615953

and workmanship for approval by the Design Consultant/ Client prior to execution; including transportation, handling, erection, alignment,

fixing, adjustments, cleaning, protection, and completion of the works, all complete in every respect in accordance with drawings,

specifications, site conditions, and instructions of the Engineer/ Design Consultant, including provision, installation, testing, and

commissioning of appropriate integrated lighting systems such as LED strip lights, grazers, Spot Lights of exterior grade and quality and

other fixtures necessary to higlight the Interactive Sculpture, complete with IP65-rated fittings, wiring, drivers, controls, anti-theft

arrangements, and accessories; including all research, doCu.m.entation, statutory approvals, and approvals from relevant authorities as

required; and including the cost of Operations and Maintenance for the period specified in the Tender DoCu.m.ents, complete and

functional in every respect. The job includes all necessary prototyping, sampling, testing on all levels, and to initiate execution approvals to

be taken from the Design Consultant.

Interactive Sculpture: Nagdhara Filtration System (Working Water Purification Sculpture)

Providing, fabricating, supplying, installing, testing and commissioning of one (1) no. interactive, functional, scaled miniature sculpture

representing the traditional Nagdhara water filtration and purification system, demonstrating water flow between water bodies,

sedimentation, filtration and purified discharge into Sharmishtha Lake, including complete design, research, sculpture fabrication using

approved natural stone / pigmented concrete / terrazzo / SS / MS, functional sedimentation and filtration chambers, pumps, motors,

filtration media, plumbing, electrical works, civil foundations, waterproofing, testing, commissioning, operation & maintenance manuals

and defect liability period mentioned in the Tender DoCu.m.ent, complete in all respects complete with all necessary supporting framework,

anchors, fasteners, and hardware suitable for site conditions and manufacturer’s specifications; including preparation and submission of

shop drawings, fabrication and installation details in consultation with the Installation/ Sculpture Artist, with structural design verification,

calculations, and certification by the Contractor’s in-house Structural Engineer and 03rd Party Investigations to ensure structural stability,

production quality, and execution finesse; including approved surface preparation and finishes such as primers, protective coatings, paints,

140 sealers, or treatments to achieve abrasion resistance, durability, and visual quality as approved by the Design Consultant; including Each 1 615953

prototyping and sampling of materials, finishes, and workmanship for approval by the Design Consultant/ Client prior to execution;

including transportation, handling, erection, alignment, fixing, adjustments, cleaning, protection, and completion of the works, all complete

in every respect in accordance with drawings, specifications, site conditions, and instructions of the Engineer/ Design Consultant, including

provision, installation, testing, and commissioning of appropriate integrated lighting systems such as LED strip lights, grazers, Spot Lights of

exterior grade and quality and other fixtures necessary to higlight the Interactive Sculpture, complete with IP65-rated fittings, wiring,

drivers, controls, anti-theft arrangements, and accessories; including all research, doCu.m.entation, statutory approvals, and approvals

from relevant authorities as required; and including the cost of Operations and Maintenance for the period specified in the Tender

DoCu.m.ents, complete and functional in every respect. The job includes all necessary prototyping, sampling, testing on all levels, and to

initiate execution approvals to be taken from the Design Consultant.

Archaeological Sites of Vadnagar Map:

The work comprises the complete design, supply, construction and installation of an outdoor floor map installation depicting the

archaeological and heritage sites of Vadnagar city in Gujarat, to be executed at an approved public location, including site clearing,

excavation, leveling and preparation, construction of a compacted granular sub-base and a reinforced concrete base slab of appropriate

grade and thickness, and provision of an outdoor-grade, anti-skid and weather-resistant floor finish such as terrazzo/ polished granite/ Agra

Mandana Stone/ pigmented concrete or equivalent durable material; the floor map shall accurately represent the city layout and clearly

identify major archaeological features including the fortified town remains, Kirti Toran, Gauri Kund, Sharmishtha Lake, Paschim Mehtani

Vav, Zunzunia Well, Buddhist monastery remains, excavation areas such as Amba Ghat and other significant heritage sites, using precision

engraving, etching or inlay work with legible text, symbols, legends, directional arrows and scale, with all color infill being UV-stable and

141 suitable for long-term outdoor exposure; embedded markers or plaques of bronze, stainless steel or anodized aluminum shall be securely job 1 3500000

fixed flush with the surface at key locations, and the entire installation shall be protected with outdoor-grade epoxy or polyurethane sealing

and, where specified, anti-graffiti coating, while providing proper slopes for drainage, expansion and control joints, and neatly finished

stone or granite borders around the perimeter; the scope further includes all necessary workmanship, labor, materials, tools, setting out,

protection of adjacent areas and archaeological features, compliance with relevant Indian Standards and safety norms, witha provision of IP-

rated LED ground lighting of exterior grade and quality with conduits and cabling if required, final cleaning and waste removal, and

handover of the completed installation in a ready-to-use condition along with basic maintenance guidelines and a defect liability warranty

for materials and workmanship. The job includes all necessary prototyping, sampling, testing on all levels, and to initiate execution

approvals to be taken from the Design Consultant.

Tensile Canopy :

Providing and fixing imported tensile fabric of make Ferrari or equivalent, with the best grade for outdoor purposes, over steel frames with

all fittings and fixtures such as centenary cables PVC/SS membrane plates, swedge, fork etc. as per the direction of Engineer in Charge. Rate

142 is inclusive of design providing and fixing fabric with all necessary accessories as required as per approved design complete. (Material

Specification: -Tie Cables Galvanized Steel Core Make :- Usha Martin / Bharat Wire Rope, Material of End terminals and Nut bolts SS

End plates Mild Steel with Hot dip galvanized along with powder coating , Fabric Fixing Nuts and bolts HDG with 80 microns. Color of the

fabric, steel members and fixings to be as per Design Consultant, with custom artwork spread upto full size of the fabric.

Concept Design, Detail Design, and Execution of Online Digital Platform for Hosting of QR Codes for Outdoor Sculptures, with wire framing,

user interface design, and development of a responsive platform that is compatible across mobile and laptop devices. The platform is to be

designed and developed in synchronisation with the design language of the overall branding, with dedicated pages for Outdoor Sculptures

at the Site. The platform is to be updated from time to time with updates. This web portal will also have an admin interface for back-end

monitoring and handling of the platform. The platform shall act as a single window for users to access all information and services offered

by Sharmishtha Island. All the content for the platform, such as pictures, videos, text, graphics, banners, etc., will be procured by the

Contractor and will be approved by the Design Consultant. General Requirements: 1. The platform should be scalable. 2. The platform

should be responsive and web optimised. i.e., should have good YSlow or PageRank ratings. 3. The platform should adhere to "GoI-

Framework & Guidelines for platform design and use of Social Media for Government Organizations", issued by the Department of

Electronics & Information Technology, Ministry of Communications and Information Technology (MoCIT, GoI) 4. The platform should be

easy to manage and add content by a non-technical person from the admin panel. 5. The platform should be SEO enabled and can be easily

optimised. 6. The platform should use an industry-standard open-source system to create a secure and robust platform with a backend

CMS. 7. The frontend design of the platform should be easy to navigate and should have an international feel to its overall design.

Trilingual ( English, Hindi and Gujarati) with an option to add other languages. 9. The platform should have a dedicated section for

events/performances that are happening at Sharmistha, and the upcoming events will be updated regularly. 10. A section with details and

images of past events should be available on the platform and updated regularly. 11. The platform will be updated with content regularly.

12. The platform should be able to sync social media accounts and showcase posts on the homepage. 13. The platform will be maintained

for the entire duration of the contract, all bug fixes, 404 errors, broken links, regular updates and annual hosting for 2 years will be part of

The contractor shall hire a social media person responsible for managing Sharmishtha Island's social media presence, with a total budget,

including ₹25,000 specifically allocated for marketing activities starting before 02 months before project initiation. The marketing team

shall be responsible for creating and posting new, original content 2–3 times per week across all social media platforms, including

Instagram, Facebook, and X (Twitter), ensuring that no existing or previously used photos/videos are reused. The team will manage the

workflow, content quality, and timely posting in line with the department’s requirements, and all payments will be made as per

reimbursement to the department

As part of the social media team, the contractor shall hire a photographer within a budget of ₹75,000 with proven experience in interior

spaces, architectural photography, and event photography, capable of delivering both high-quality photos and videos. The photographer

must possess strong knowledge of editing and enhancement software to produce visually compelling content and demonstrate a clear

145 understanding of capturing architectural and interior design details, ensuring all visuals meet professional standards and support the Nos

marketing team’s social media objectives. The photographer will be responsible for covering all events, performances, and public feedback.

The photographer will provide edited photos and videos for the purpose of posting on social media. The photographer will work in

coordination with the marketing person to create content for social media.

Note: G.S.T. should be extra as actual

Estimated Amount as put to Tender Rs. 4,58,19,315.43/- + G.S.T.

Note 01: All works shall be carried out as per public work department hand book and other specifications if Division or as directed

Note 02: Rates quoted include clearance of site (Prior commencement of work and its close) in all respects and hold good for work under all conditions, site, moisture/ weather, etc. &

Note 03:-Rates quoted include clearance of site (Prior commencement of work and its close) in all respects and hold good for work under all conditions, site, moisture/ weather, etc

Note 04:-The Contractor shall exhibit a board as per Government Circular No. BDG/ 3277/ 1657/ N Dated 26/1/1997 S(M.GUJ) with detailed specifications and details of work and amount involved at the site without any payment as directed

by the Engineer-in-charge.

Note 05: All the columns in schedules should be filled in ink and the total of the entries in ink last column should be struck by the contractor under his signature.

Note 06: Serviceable material available (if any) after Demolishing / Dismentalling any item should be hand over to the concerned SAG Site Engineer In Charge as per