Notified Area Office Ankleshwar

No. 1 % LWC

Carry out routine maintenance and servicing

and testing up to 6300 Amp L.T. ACB with below

defined scope: (1) Cleaning of dust,spider web

,foreign particles. Etc . (2) Removal of old grease

with new grease for various parts.(3) Cleaning

of various parts with CRC.(4) Check the

1 tightness of all hardware (5)Checking of Spring 5 Job 1836.18

Charging, Closing & Tripping mechanism (11)

Measurement of IRV (12) Measuring of

closing/tripping time by time testing kit (13)

Measuring contact resistance by CRM kit.(14)

Release testing by OEM recommended testing

Carryout routine maintenance and servicing of

L.T. cubical panel board having approximately

15 to 22 Nos. of switches cleaning and servicing

the contacts with CRC, tighting the connections

of incoming and outgoing cables. and hacking

the operating mechanism for smooth

2 functioning of switches. and putting them in 5 Job 2140.19

smooth working order. (Consider of following

feeder on LT Cubical Panel - 800 Amp ACB -

Nos, 90-132 KW VFD-04 Nos, 150 KVA APFC

panel, all bus bar, switches, Power & Controle

wiring, all termination, Cooling fan of VFD &

Panel, 150 A SFU -03 Nos)

Servicing, overhauling, cleaning of the panel

board LT by liquid EPNF-065™ technology

after scanning the single side of panel by

thermal scanning technology. Thermal scanning

technology includes measuring temperature

before and after servicing by each & every space

of the panel board.

One side of panel must be cleaned by Air Sq.

Compressor Capacity 2.5 to 3.5 HP Motor, 1 or Mtr

3 phase, 230v, Air tank having capacity approx

50 kg with latest moisture filter, spray gun

having EPNF-065™ liquid. The work having time

constraints of 2 to 5 minutes single side of the

panel. After finishing work agency has to

provide 3 photographs or to provide 2 minutes

video. Dust or any waste material must be

SIGNATURE OF CONTRACTOR CHIEF OFFICER

NA, GIDC, ANKLESHWAR

collected by agency in the bottom of panel board

by non woven fabrics material or any scientific

materiel. Agency has to carry out work in

presence of site in charge engineer & to

complete the work as per site in charge

Labour charges for Round the clock Routine

Preventive Maintenance of below Panels. It

includes the Attending the fault and Complete

Control Panels Servicing / Repairing /Cleaning

of all panels with checking of all the terminals of

Star Delta Connectors/Over load Relay/Single

Phase Preventer /Timers/ Auto Transformer.

Checking of all the Lugs & Nut-bolts condition

and if found unhealthy then cleaning of all the

Rust and Deposited Carbon on faulty Terminal.

It means the job include the Complete Repair &

Maintenance of all the panels per month or as an

when required with all contact kits Cleaning,

Tightening of Connections, Power & Control

wiring repairing / Replacement of panel

accessories (if required)

Servicing & overhauling of HT-DP strecture with

GOD switch, DO fuse, lightining arrestors etc.

comp. With double coat Al. painting as

instructed by the engineer in charge. Job also

including replace all non working spare parts

like Male Contact, Female Contact, Tinned

Copper Jumper, M.S. Jumper Carrier, Back

Connector, Misc. Hardware like Nut-bolts,

Operating Road, Pin and Disc, Insulator Etc.

Complete as per directed by Engineer In-charge

Routine Maintenance of 300 to 1000KVA

Transformers. It includes the Checking/

Servicing/ Maintenance of H.V. /L.V. Cable End

Termination and if required then replacement

of H.V. / L.V. Side Lugs with Proper Method with

6 Required Tools like Crimping Machine. The Job 6 Job 10089.53

also includes the checking of Oil Level of

Transformer/ Silica Gel Brether Condition/

Day-farm Condition and attending the outside

oil leakage faults if found with replacement of

Outer Side Gasket if necessary.

SIGNATURE OF CONTRACTOR CHIEF OFFICER

NA, GIDC, ANKLESHWAR

SITC Of various spare part of ABB Make & ACS

550 - Model VFD AS and where Required as

Below for Following Capacity VFD - 157 Amp,

180 Amp and 195 Amp

a CONTROL BOARD SMIO-01C 1 Nos 25400.00

b DRIVE DISPLAY ACS-CP-C 1 Nos 5000.00

MAIN INTERFACE CARD SINT4610C (after

week 50/06 manuf)

CURRENT CARD SCIB-01C (after week 50/06

e SRFC4611C INPUT FILTER KIT 1 Nos 32500.00

f RFI) filter printed circuit board RRFC6641 3 Nos 6000.00

g MAIN FAN 6314 HR 1 Nos 20500.00

h DC Capacitor ALS30C1023NP 4 Nos 12500.00

Snubber Capacitor on IGBT MKP

C4BSNBX4120ZAJJ

j Chowk OCHO5630 IP21 1 Nos 15000.00

IGBT SKM300GB128D (FF200R12KE3)

IGBT FF300R12KE3 (SKM400GB128D)

IGBT FF300R12KE3 (SKM400GB128D)

n CHARGING RESISTOR CAH-150-C-27R 1 Nos 7000.00

o DISCHARGING RESISTOR NXBU-3X6,8 65W 1 Nos 8000.00

p THYRISTOR TD162N16KOF SPKIT 3 Nos 12610.00

q SKELTON PLASTIC HOSING DRIVE BODY 1 Nos 10000.00

SITC of Miniature circuit breaker single pole 6A

to 25A suitable to operate on 240 V A.C. system

8 and having breaking capacity 10 KA to be 2 Ea. 112.11

erected in existing box. confirming to IS

8828/1996 with ISI Mark.

Supplying & erecting directly operated single

9 phase preventer complete erected and 2 Ea. 1078.68

connected to supply up to 45 Amp. range

SITC of Digital volt meter/ Ammeter with

Supplying and erecting approved make set of

indicator lamps of LED type lamp, lens cover,

Bakelite holder complete erected with

necessary connections.

12 SITC of Push button with elements 2 Ea. 205.40

13 SITC of Electronic Timer 2 Ea. 1540.52

SITC of Electronic Overload Relay with auto

scrolling & all protection for motors)

15 SITC of 63A Contactor MNX400 L&T make 2 Ea. 7909.47

Measurement of earthing resistance by loop test

after isolating & cleaning joint.

All Inclusive comprehensive maintenance cost

for the period of one year for the EOT Crane,

SIGNATURE OF CONTRACTOR CHIEF OFFICER

NA, GIDC, ANKLESHWAR

Crane panel, Motor, Starter / Starter Panel,

remote, wiring & Cables of up to 5 Tone

Providing, and erecting 22 KV D.P. 6 mtr. high

Structure made of G.I. 6" x 3" ‘I’-Section Girder,

4" x 2"channels, clamps, nuts, bolts etc. Suitable

for erection of the followings duly connected

with necessary ACSR conductors. as per

drawing approved by the Engineer- in charge

complete with following. Height as per IS 7 Mtr

above ground ) (A)

22 KV 200 Amps Drop out fuses with S.R.B.P.

18 tubes carries.-Three nos (B) 22 KV G.O.D. 1 set 98433.59

switch complete with insulators, operating

handle with galvanised pipe, Sq.bar etc.

Amp.- One Set (C) 22 KV lightening

arrestor with clamp- Three Nos.

(D) 22 KV shackle insulators- Six Nos. (E)

The above D.P. structure should be earthed with

25 mm.X 3 mm thick double copper earth strips

run separately and connected with separate

copper plate earth electrode.

Making trench in soft soil of suitable width of

cm deep for laying cable or locating the fault all

over the run and back filling the same and

making the surface as normal ground.

Making trench in Hard Murrum / Tar Road of

suitable width of 90 cms or required depth for

20 laying any size of cable or locating the fault all 200 Mtr 74.74

over the run and back filling the same and

making the surface as normal ground.

(B) If additional machineries like hammer

driller or JCB use [Add]

Microprocessor Based LV Variable

Frequency Drive

Suppl, installation, testing & commissioning of

415 V Fully automatic microprocessor based

Variable Frequency drive for pump control

application as per general specification as

under: The VFD unit shall have modular

construction, 6 Pulse Bridge rectifier, speed

control by means of sensorless vector control

(open loop), high torque at low frequencies,

locking at high and low frequency settings, In-

built PID control, frequency accuracy of ± 0.1 %

(min), frequency resolution of ± 0.1 Hz (min),

protections against; a) overload (motor and

drive), b) short circuit, c) ground fault, d) input

/ output phase loss (open circuit), e) stalling, f)

input / output undervoltage (momentary power

loss restart), g) input / output overvoltage, h)

over-frequency, i) Input surge, j) over

temperature of heatsink, k) loss of remote speed

signal etc. The VFD shall also have userfriendly

programming software & it shall be capable of

SIGNATURE OF CONTRACTOR CHIEF OFFICER

NA, GIDC, ANKLESHWAR

at least two level parameter setting with

password lock for critical parameters,

programming for I/Os, speed search function,

copy parameters (upload / download) to other

identical unit, tuning to energy saving mode

(maximum efficiency), event / fault recording

(last 5 faults in non-volatile memory) & RS

communication port (MODBUS RTU protocol)

with required software. ( ABB Make (ACS

Model) suitable for 90 KW Motor (Pump

Application)

Supply, laying, testing & commissioning 1.1 kV

grade, XLPE insulated, stranded Aluminium

conductor, galvanised steel flat strip / round

wire armoured, extruded PVC type ST2

sheathed, heavy duty cable (to be laid on wall

23 surface with necessary clamps / in existing

cable trench / cable trays / conduit / pipe

sleeves at road crossing or floor as per site

requirement) conforming to IS:7098 (Part-1) &

IEC:60502 (Part-1) of following sizes:

a 4 Core x 10 Sqmm 500 Mtr 97.00

b 4 Core x 16 Sqmm 500 Mtr 108.00

c 3.5 Core x 25 Sqmm 200 Mtr 134.00

d 3.5 Core x 50 Sqmm 200 Mtr 211.00

e 3.5 Core x 70 Sqmm 200 Mtr 287.00

f 3.5 Core x 95 Sqmm 200 Mtr 343.00

g 3.5 Core x 120 Sqmm 200 Mtr 423.00

h 3.5 Core x 150 Sq.mm 100 Mtr 504.00

i 3.5 Core x 185 Sq.mm 100 Mtr 622.00

j 3.5 Core x 240 Sq.mm 100 Mtr 783.00

k 3.5 Core x 300 Sq.mm 100 Mtr 954.00

Supply, laying, testing & commissioning 1.1 kV

grade, XLPE insulated, stranded Copper

conductor, galvanised steel flat strip / round

wire armoured, extruded PVC type ST2

sheathed, heavy duty cable (to be laid on wall

surface with necessary clamps / in existing

cable trench / cable trays / conduit / pipe

sleeves at road crossing or floor as per site

requirement) conforming to IS: 7098 (Part-1) &

IEC: 60502 (Part-1) of following sizes:

a 4 Core x 2.5 Sq.mm 500 Mtr 81.00

b 4 Core x 4 Sq.mm 200 Mtr 141.00

c 4 Core x 10 Sq.mm 150 Mtr 295.00

d 3.5 Core x 25 Sq.mm 100 Mtr 640.00

e 3.5 Core x 50 Sq.mm 100 Mtr 1155.00

f 3.5 Core x 70 Sq.mm 100 Mtr 1634.00

g 3.5 Core x 95 Sq.mm 100 Mtr 2346.00

SIGNATURE OF CONTRACTOR CHIEF OFFICER

NA, GIDC, ANKLESHWAR

h 3.5 Core x 120 Sq.mm 150 Mtr 3001.00

i 3.5 Core x 240 Sq.mm 100 Mtr 5805.00

Supply, installation, testing & commissioning

heavy duty APP type capacitor unit, vacuum

impregnated with non-PCB / non toxic oil,

25 internally delta connected with built in internal 100 KVAR 285

fuses complete with discharge resistances &

terminal cover, rated for 440 V AC, 3 Phase,

Hz as per IS: 13585 Part-1. APP type Capacitor

Providing & fitting heavy duty brass cable

glands (nickel-plated) with washers & rubber

26 ring conforming to IS, suitable for 3, 3½ & 4 core

cables of following type & sizes: Single

Compression Brass Cable Glands

Solder less crimping type Aluminum lugs

conforming to IS suitable for cable of following

size evenly crimped with high pressure tool &

connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved

Solder less crimping type Copper lugs

conforming to IS suitable for cable of following

size evenly crimped with high pressure tool &

connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved

SIGNATURE OF CONTRACTOR CHIEF OFFICER

NA, GIDC, ANKLESHWAR

Providing pair of rubber hand gloves suitable

for working on 11 KV/22 KV supply.

Supplying rubber matting of following thickness

30 15 Sq.Mtr 3081.51

as per IS:15652/IEC 61111 - 12 mm

Providing and erecting cable end termination

kit, heat shrinkable Push on type Densons’/

‘Raychem’/ Elastimold make suitable for 22 KV

XLPE cable 3 core 95 & 120 Sq.mm

a Outdoor type 1 Ea 14611.67

b Indoor type 1 Ea 8004.25

Outside painting of Transformer for the

following capacity (A) 250 / 315 / 500 KVA,

32 cleaning of old paint, remove all corrosion with 10 Ea 1583.68

proper maner then after applyig pain as per

standered paint

Graphitized Expanded PTFE Graphite Braided

Compression Packing for Pump Gland or Valve

Stem or Mechanical Seal. Graphite / Asbestos

Gland Packing (3 mm to 45 mm ) Teflon Glamd

34 Supply of Standard Make oil & Grease

a 15W40 100 Ltr 375

b Valvoline (HLP 46) 100 Ltr 218

c Servo 90 GEAR HP 90 Gear Oil 100 Ltr 848

d Gulf Crown MultiPro Automotive and Non-

Automotive High-Performance, Multi-Purpose 100 Kg 330

Providing and erecting approved make four

pole moulded case circuit breaker having

braking capacity ICU of 25 KA to 50 KA at 415 V

35 with thermal & Magnetic release suitable to

work on A.C. supply 50 c/s. with all internal

connections & complete erected in existing

G.M.S. housing

a 125 Amp (35 KA) 1 Ea 8055.76

b 200 Amp (35 KA) 1 Ea 16221.61

c 250 Amp (35 KA) 1 Ea 20946.39

d 400 Amp (50 KA) 1 Ea 25228.79

Approved make Four Pole LT Heavy Duty

Switch Disconnector Fuse Unit Cubical type for

panel mounting complete with operating

36 mechanism suitable to operate on 415V A.C.

With HRC fuses of suitable load confirming to IS.

13947 (Part I & III). of following capacities. Cat-

SIGNATURE OF CONTRACTOR CHIEF OFFICER

NA, GIDC, ANKLESHWAR

a 125 Amp 1 Ea 6120.60

b 200 Amp 1 Ea 8072.93

c 250 Amp 1 Ea 9348.56

d 400 Amp 1 Ea 11684.69

Supplying Knife / Blade / DIN type HRC fuse link

37 capable to withstand 80 K.A. confirms to I.S.

13703 for following current capacity

a 63 Amp. to 100 Amp.(Size 000 ) 3 Ea 214.12

b 63 Amp to 100 Amp (Size 00) 3 Ea 309.06

c 125 Amp to 160 Amp (Size 00) 3 Ea 368.65

d 100 Amp to 200 Amp (Size 0) 3 Ea 445.41

e 125 Amp to 200 Amp (Size I ) 3 Ea 565.60

f 250 Amp (Size I ) 3 Ea 634.28

g 200 Amp to 400 Amp (Size II ) 3 Ea 831.23

h 400 Amp to 630 Amp (Size III ) 3 Ea 1275.63

Supplying & erecting earth pit of minimum bore

dia.150mm size , approved make Safe Earthing

Electrode consisting Pipe-in-Pipe Technology as

per IS 3043-1987 made of corrosion free

G.I.Pipes having Outer pipe dia of 50mm having

38 80-200 Micron galvanising, Inner pipe dia of

mm having 200-250 Micron galvanising,

connection terminal dia of 12mm with constant

ohmic value surrounded by highly conductive

compound with high charge dissipation suitable

for following type of applications.

(a)For Electrical installation up to 11 KV in

a normal soil. Length of Pipe : 2.00 mtrs Back 1 No 5760.03

filling Compound :1 no. Bag of 25 Kg.

(b) For Electrical Installation covering

Transformer Neutrals, Lightning arrester

Earthing, A.C.Plant & Sensitive Computer

b System(like Automation, SCADA) i.e 1 No 8636.51

independent Earthing in normal soil. Length of

Pipe : 3.00 mtrs Back filling Compound :2 nos

Bags of 25 Kg.

Providing and erecting AC-3 duty 3 pole power

contactor with 2 NO & 2 NC aux contacts

39 complete with 415V/220V operating coil

suitable for (L&T, BCH,T.C., Siemens, C&S

a for 25 / 32 A rating 3 No 1152.00

b for 40 A rating 3 No 2292.00

c for 60 / 70 A rating 2 No 3972.00

d for 80 / 95 A Rating 2 No 5400.00

e for 110 A rating 2 No 6612.00

Supplying skilled man power of at Notified Area

Ankleshwar as and when required. (i.e. 2 pairs

dresses, 1 pair safety shoes, badges, caps and

belts to his staff essential and suitable for

SIGNATURE OF CONTRACTOR CHIEF OFFICER

NA, GIDC, ANKLESHWAR

performing job). Necessary Insurance charges

statutory provision, EPF, Medical, Bonus, W.C.

Policy, Personal Protective Equipment (PPE),

pay leave (PL), Public Holiday(PH), weekly Off,

shall be borne by the agency. The agency has to

work as per instruction of Engineer- in- charge

/ Officer in charge of Notified Area Authority as

per specification given in Technical Bid. Agnecy

have strickly provide all statutory provision like

EPF, ESIC, Salary on Bank transfer, Bonus, Pay

Leave ETC per month with all required

document and then after bill process by the

department if not submitted as per rules

payment will be made accordingly

a Electrican / plumber/ Fitter 150 No 672.54

b Skill Labour 150 No 657.44

Providing and erecting required size HOT deep

Galvanised iron strip for earthing of H.T. , OCB/

ACB/ Transformer LT panel board, Motors etc.

using proper clamp.

Providing and erecting required size Copper

strip for earthing of H.T. OCB / ACB/

Transformer, LT panel board, Motors etc. using

copper clamp.

Supply, installation, testing & commissioning of

flange ends Expansion Bellow as per EJMA

standards of overall length of minimum

mm, designed for 15 mm axial compression and

5 mm axial extension with tie rods etc. of

following MOC & pressure ratings. MOC:

Bellows: SA 240 Gr. 304; Internal Sleeve: SA

Gr. 304; Weldends: IS 2062 Gr. B; Flanges: IS

2062 Gr. B (Drilling as per IS 1538 / IS 6392 ) &

Limit Rods & Nuts: CS - IS 1367. PN -

Lowering / Lifting of 3 phase submersible pump

set with MS / GI column pipe or HDPE Pipe into

bore well inculding checking of therads of each

pipe with coupling / welding & jointing cable

44 with fuse unit box / control panel board 16 No 2800.00

including fitting accessories by means of

mechanised derrick / chain pulley block

including satisfactory testing. Above 150 meter

to 300 meter depth

Ultrasonic Type Level Transmitter with Remote

Display :

Design, Supply, Installation, Testing and

Commissioning of NOn Contact Ultrasonic Type

Level Transmitter with Remote

The sensor should be non contact type, field

SIGNATURE OF CONTRACTOR CHIEF OFFICER

NA, GIDC, ANKLESHWAR

mounting type, housing shall have minimum

IP65 protection, PP/ PVC Sensor MOC, with

sensor to transmitter cable.

Remote Indicator cum Transmitter:

Microprocessor based indicator with LED / LCD

digital display,panel/ wall mounting type,

power supply shall be 110-240 Vac or 15 to

Vdc, 50 Hz ± 10 %.

Accesories: Mounting bracket, nut, bolts etc as

per system requirement and Hook up diagram

of the Instruments.

Level Transmitter shall be suitable for following

Range. 4-20mA Splitter -02 Nos

Supply Voltage - 24VDC

Control Input - 4-20mA

Control Output - 2Nos 4-20mA

SMPS -01 Nos

Supply Voltage - 240VAC

Output Voltage - 24VDC

Current Capacity- 2A

IOT Gateway SMIT 1937i - 01 Nos

GPRS/GSM gateway Interface

Control Input - 4-20mA( Dual Channel)

Supply Voltage- 24VDC

Push data on Cloud , Din rail mounted

1 Year Subsciption included need to renew

every year

SIM CARD IN PARTY SCOPE

Display (25.20"x 12.60") - 01 Nos

Neumeric Dot Metrix Type 3 Digit Display

Supply Voltage - 240VAC

Control Input -4-20mA

Providing and fixing approved make Perforated

C type cable tray. Made from sheet steel. The

cable tray should be single or double bended as

per required and as per IS 2062/1079 and shall

be coated with hot dip galvanizing as per IS

46 2629/4759. with max 17.5% perforation with

coupler plate / Fish plate and GI hardware like

nut - bolt and washers etc. erection with

necessary support( included) as per

Specification and as per instruction of engineer

in charge..

(1) 50 X 50 X 1.6 mm Thick 50 Rmt 305.02

(2) 100 X 50 X 1.6 mm Thick 50 Rmt 360.57

(3) 150 X 50 X 1.6 mm Thick 50 Rmt 424.20

(4) 200 X 50 X 1.6 mm Thick 50 Rmt 496.92

(5) 300 X 50 X 2.0 mm Thick 150 Rmt 622.16

(6) 450 X 50 X 2.0 mm Thick 12 Rmt 801.94

Total Rs.

SIGNATURE OF CONTRACTOR CHIEF OFFICER

NA, GIDC, ANKLESHWAR

Sr.No Above Below

1 I / We hereby agree carry out the I / We hereby agree carry out the

work at the rate given in Schedule B work at the rate given in Schedule B

@ _______ % above. @ ______ % below.

2 Net Amount Rs. _______ Net Amount Rs. _______

Important Note:

1. The rates offered shall be inclusive of all applicable taxes (1% LWC, ESIC, PF,

packing, forwarding, insurance, loading, unloading, shifting & transportation at

store/ site of work at Ankleshwar Notified Area.)

The rates offered by Bidder shall be Exclusive of GST.

2. I/We have read the conditions mentioned in this tender & agree to abide by the

3. Please note that the agency in whose favor the tender is finalized by the competent

authority shall have to submit the document like insurance of the staff engaged

RPFC No. Labor license etc. and documents for vehicle.

4. This is a O&M work, the agency has to operate & maintain the system as per

instructions of engineer-in-charge during the contract period. During contract

period the wages & facilities to be provided to the staff engaged by the agency as

per labour laws & accordingly rate may please be quoted.

5. The successful bidder in whose favor the tender is finalize by the competent

authority has to enter in to an agreement with Notified Area office in B-1 agreement

form, the conditions & clauses of the agreement shall be binding to the agency. If

the bidder desires to study the same, the same is available in the office of the

Notified Area Officer, GIDC, and Ankleshwar during office hours of the working

7. 1% labour welfare cess on the bill amount will be deducted from the each RA bill

as per Govt. norms.

8. Agency has to pay ESI / Professional Tax/PF etc as per Govt. norms. Agency has to

submit the photocopy of challan of ESI and PF paid at every month. If the same is

not submitted by the agency, ESI /Professional Tax/PF deducted from the RA Bill

by the NAO. Payable amount.

SIGNATURE OF CONTRACTOR CHIEF OFFICER

NA, GIDC, ANKLESHWAR