work

Amount

Dismantling work

Dismantling of 198 KV L.A. along with ALP structure and proper stacking after opening of jumpers and disconnection of earthing ( 1 Job for each set of L.A. and ALP structure).

Opening of connections of control and power cables of existing 60 MVA transformer -I at both ends and C&R panel , cooling fans, marshalling box etc.

Dismantling and Shifting of Existing 60 MVA Transformer-I RTCC Panel from ACDB Room including necessary Disconnection of Control Cables, identification of Cables for necessary future connections and Shifting the same at proper place / store as per direction of site Engineer.

Dismantling of complete water and air pipeline and support of emulsifier system with accessories for emulsifier system installed on 60 MVA Transformer-I and shifting to storage place at sub station.

Complete safe Dismantling of the accessories of existing 220/33 KV 60 MVA Transformer-I including Opening of Jumpers, Removal of Earthing, Opening of Cable Connections, Draining out of Transformer Oil up to required level in 209 Ltr. capacity Oil Drums, Removal of Conservator Tank, Pipe Lines, Bushings, Cooling Fans, Marshalling Box, Radiators after Draining of Radiator Oil etc. and Fixing of Blanking Plates on the Radiators, Pipe Lines, Conservator Tank, Turret etc. with proper Stacking. Blanking Plate including Bolts & Nuts shall be provided by the Contractor.

Dismantling of Existing 36 KV Vaccum CB after opening of Clamps ,Connectors, Conductor etc. and Shifting it at sub station store place. ( 1 Job for 01 CB).

Dismantling of Existing 36 KV CT after opening of Clamps ,Connectors, Conductor etc. and Shifting it at sub station store place. ( 1 Job for 01 CT).

Shifting of Main Tank of existing Areva make 220/33 KV 60 MVA Transformer-I to storage place from the Plinth up to 75 Meter distance including turning of Tank if required.

Additional Shifting of Transformer main tank upto 40 Meter distance (1 Job for every 5 Meter)

Proper Packing of HV / LV & Neutral Bushings of dismantled 60 MVA Transformer including proper wrapping with Polythene Sheet in Wooden Crates of new Bushings of 100MVA Transformer.

Carriage work

Carriage( Including Loading and Unloading By Crane /Hydra/Manpower at Both Sub stations Stores) of 36 KV Vaccum CB of 2000 A Capacity,& Earthing MS Rod, MS flate Etc.from 220 KV substation Chinhat Lucknow or other 220/132 KV substation lucknow to 220 KV substation Gomtinagar Lucknow (approx distance upto 30 KM )

Safe Carriage of 4Cx2.5 Sq mm/6Cx2.5 Sq mm /10Cx2.5 sq mm Copper Control Cable Drum from 220 KV Sub Station Kursi Road/Chinhat/Hardoi Road or any other 220/132 KV substation, Lucknow to 220 KV Sub Station Gomti Nagar, Lucknow (approx distance 30 km).

Erection work

Following works are to be carried out for the work of Installation, Erection, Testing & Commissioning of 100 MVA, 220 / 33 KV T/F in place of 60 MVA, 220 / 33 KV T/F - I (Make - AREVA) at 220 K.V. S/S Gomti Nagar, Lucknow along with associated works including all cost of men, misc. consumables, Nuts & Bolts, Gaskets, T&P, Crane, 6 / 12 KLPH capacity Centrifuging Machine with Operator etc. to complete the job satisfactorily as per direction of Supervising Engineer :

Shifting / Dragging of Main Tank to Plinth of 100 MVA, 220 / 33 KV T/F up to 20 Meter distance including turning of the T/F Tank as required along with associated accessories from unloaded place at 220 K.V. S/S Gomti Nagar, Lucknow with all due care of safety & precautions.

Additional Shifting of Main Tank up to 50 meter distance (1 Job for every 5 meter)

Complete Erection of 100 MVA T/F including 'A' Frame, Header, Radiators, Conservator Tank, Bushings, Connecting Pipe Lines, Cooling Fans & Pumps, Marshalling Box, Drive Mechanism Box, OTI, WTI, Capillary Pipes etc.

Making of 02 No. Additional Delta for Neutral Earthing by due fabrication of 3 No. 3.5 Meter long Electrodes of 40 mm dia. M.S. Round Bar, its piercing under the ground at equal distance of 1 Meter at 700 mm depth by digging of earth and connecting all the 3 No. Electrodes with 75 mm x 10 mm size M.S. Flat & connecting with existing Earthmat and taking out Riser by due cutting, bending, welding etc. as per Technical Specifications.(Delta earthing connection to earthmat as per new guidline)

Filling of fresh T/F Oil from T/F Oil Drums in Oil Tank and then Centrifuging of the T/F Oil by Ultra High Vacuum Oil Filtration Plant after connecting the Centrifuging Pipes with Oil Tanker to Oil Filtration Plant including taking the BDV Values of Oil periodically till the required value is achieved and creating the Vacuum inside 100 MVA T/F before filling the T/F Oil including Vacuum Stand Test, with all cost of Centrifuging Machine, CFM Operator, Lubricants etc.

Centrifuging / Dehydration of the complete T/F Oil of 100 MVA T/F by Ultra High Vacuum Oil Filtration Plant after connecting the Centrifuging Pipes with T/F Tank to Oil Filtration Plant including taking the BDV Values of Oil periodically till the required value is achieved including Filling & Topping up of the above prepared T/F Oil under Vacuum in Main Tank, Radiator, Conservator Tank etc. and Attending the Oil leakages if any, with all cost of Centrifuging Machine, CFM Operator, Lubricants etc.

Earthing of Main Tank, Marshalling Box, Drive Mechanism Box, T/F Neutral & 'A' Frames etc. of 100 MVA T/F with the help of 50 x 6 mm / 75 x 10 mm size M.S. Flat (to be provided by Department if additionally required), its jointing with already laid Earthmat / Deltas at 2 places and necessary modification in existing support for Earthing of Neutral Bushing support for its Earthing work and then Painting of Earthing Strips 01 coat of red oxide primer and 02 coat of bush green paint including removal of old paint by rubbing with emery paper, as per technical specifications / standard practice.

Erection of 198 K.V. LAs including erection of ALP Structures and connection of Earthing with existing M.S. Flats at designated places and Jumpering with 220 K.V. Jack Bus with the help of existing / newly prepared ACSR 'Zebra' Conductor as per technical specifications (1 Job for each set of LA & ALP Structure).

Jumpering of HV Bushings of 100 MVA T/F with the help of existing / newly prepared Twin ACSR 'Zebra' Conductor with associated Terminal Connectors and PG Clamps to connect with Jack Bus as per requirement. (01 Job for all 03 Phases of HV side)

Jumpering of LV Bushings of 100 MVA T/F with 33 K.V. LV Bay with the help of existing / newly prepared Twin ACSR 'Zebra' Conductor with associated Terminal Connectors and PG Clamps. (01 Job for all 03 Phases of LV side)

Erection of new 100 MVA T/F RTCC Panel including Shifting from storage place to Control Room including modification of mounting foundation, re-finishing assosiated cable entry trench and earthing etc.

Erection of New 36 KV 2000A capacity CB and its terminal connect with the help of existing / newly prepared Twin ACSR Zebra/Moose Conductor respectively with associated Terminal Connectors .

Erection of New 36 KV 2000A capacity CT and its terminal connect with the help of existing / newly prepared Twin ACSR Zebra/Moose Conductor respectively with associated Terminal Connectors .

Laying of following size control cables in cable trenches from Control & Relay panel to Marshalling Box / Equipments / Junction Boxes etc in the switchyard for new 100 MVA T/F as per cable schedule along with saddling at every 750 mm distance with MS saddles of size 25 x 3 mm including carriage of cable drums from store to laying site and shifting back remaining drums to store after work completion. The work shall also include interconnection of control cables with Marshalling Box, OLTC Panel to RTCC panel, ferruling, dressing of cables and other associated works for satisfactory completion of job as per technical specification.

2C x 2.5 sq. mm.

4C x 2.5 sq. mm.

6C x 2.5 sq. mm.

10C x 2.5 sq. mm.

Connection of the Control & Power Cables as per new cable schedule of new 100 MVA T/F & its OLTC / DM Box / Marshalling Box / RTCC Panels at both ends and Control & Relay Panel, Cooling Fans & Pumps, Marshalling Box etc. using existing / additionally laid cables per site requirement and termination along with making necessary holes in the Glands Plates or Box wherever required, providing & fixing of Cable Glands of appropriate size, lugs/fFerrules and cable termination as per standard practice & all other associated works as per technical specification.

Safe Carriage of 20 KL Transformer Oil Tank for Centrifuging of the Transformer Oil from 220 K.V. Sub Station Kursi Road / Sarojini Nagar / Chinhat or any other Sub Station in Lucknow to 220 K.V. Sub Station Gomti Nagar including Loading & Unloading (approx. distance 25 - 40 km).

Safe Carriage of 20 KL Transformer Oil Tank after completion of works from 220 K.V. Sub Station Gomti Nagar to 220 K.V. Sub Station Kursi Road / Sarojini Nagar / Chinhat or any other Sub Station in Lucknow including Loading & Unloading (approx. distance 25 - 40 km).

Work of Re-erection, Hydraulic Testing & Commissioning of Water Spraying & Fire Detection Mulsifyre System comprising of following detailed Pipe Lines on 100MVA, 220 / 33 KV Transformer at 220 K.V. Sub Station Gomti Nagar under E.T.D. - II, Lucknow during replacement of Transformers with all cost of men, materials and T&P etc. required for the job as per details below : G.I. Pipe Lines : 100 mm dia. - approx. 7 Meter, 80 mm dia. - approx. 123 Meter, 65 mm dia. - approx. 46 Meter, 50 mm dia. - approx. 38 Meter, 25 mm dia. - approx. 180 Meter, Q.B. Detector (790 C) with Quartzoid Bulb - 55 No., HV Nozzle : 80 No.

Supply & installation of 80 mm dia B-Class GI Pipe for support with round clamp at top and flanges at bottom as per specification including grouting & painting etc.

Providing, laying, installation, testing & commission of new 50 mm dia B Class GI pipe with elbows, tees, sockets, flenges, bends etc. including its painting and connection to already dismantled existing pipe line (as may be required).

Providing, laying, installation, testing & commission of new 40 mm dia B Class GI pipe with elbows, tees, sockets, flenges, bends etc. including its painting and connection to already dismantled existing pipe line (as may be required).

Providing, laying, installation, testing & commission of new 25 mm dia B Class GI pipe with elbows, tees, sockets, flenges, bends etc. including its painting and connection to already dismantled existing pipe line (as may be required).

Providing, installation & commissioning of HV Nozzle with discharge 80 Ltr./min & cone angle 60o - 120o

Providing, installation & commissioning of Q.B. Detector (79o C) with Quartzoid Bulb.

Erection, Hydraulic Testing & Commissioning of complete Mulsifyre System by installation of high velocity Automatic Water Spraying & Fire Detection System on 100 MVA, 220 / 33 KV Transformer by using old & dismantled / newly laid additional Pipe Lines including providing of new Gaskets / Packings of required sizes along with necessary welding / jointing and Earthing of Pipe Supports after re-construction of damaged RCC Foundations for Pipe Supports.

Painting of above installed Automatic Water Spraying & Fire Detection System on 100 MVA, 220 / 33 KV Transformer in 02 Coats of synthetic enamel Paint after due application of 01 Coat of Red oxide Primer after removal of old paint by rubbing with emery paper. The Water Pipe Lines shall be painted in P.O. Red colour, Air Pipe Lines in Sky Blue colour, Pipe Supports in Black colour and Earthing Strips in Bus Green colour.

Cutting, Straightening, Laying 700 mm below inside ground & above ground of 75x10/25 mmx6 mm size M.S. Flats to be provided by Department as per requirement at 220 K.V. Sub Station Gomti Nagar for Earthing of various Structures of Emulsifire System installed in Transformer including welding with main Earthmat and with the object to be earthed, excavation of Trenches, its back filling, Painting of Earthmat above ground level in two coats of Bus Green colour after application of red oxide primer including all other associated works to complete the Earthing work satisfactorily as per Technical Specifications :-

Earthing of Structures & Equipments with 25 mm x 6 mm size M.S. Flat

Providing, Fixing & Installation of different type of Name / Identification Plates as per detailed below are to be carried out at 220 K.V. S/S Gomti Nagar under E.T.D. - II, Lucknow as per Technical Specifications and as per direction of the Supervising Engineer :

Name Plates made of 2 mm thick Aluminium Sheet covered with 3M HIP Retro Reflective Sheet of following size with details / name written by using 3M HIP Retro Reflective Sheet as per prescribed color scheme to be fixed with the help of Nuts & Bolts at already installed equipment structures in the switchyard with all cost of Plates, Nut & Bolts, misc. materials, T&P and Labour as per Technical Specifications & Directions of Supervising Engineer :

300 mm x 200 mm

450 mm x 250 mm

500 mm x 250 mm

Tan Delta Testing of 220 KV Bushings of T/F with variable frequency Tan Delta including cost of transportation of testing kit along with expert engineer.

Electrical & Chemical Analysis of T/F Oil at CPRI Lab including cost of transportation of oil sample.

Water Content (PPM)

Dielectric Dissipation Factor (Tan Delta)

Dissolved Gas Analysis (DGA)

Winding Resistance Measurement in all HV, LV & TV windings including cost of transportation of testing kit along with expert engineer.

Supply & Fixing of 160 Watt LED street light luminaries (outdoor type) of PHILIPS/CROMPTON GREAVES ]/ HAVELLS/BAJAJ make in single piece aluminium die cast, at designated height on gantry/beam on G.I. Light Bracket including guiding the cable to light fixtures from inside pipe/bracket, cable terminations and it’s testing and commissioning and earthing with 12 SWG Wire.

Spray/Brush painting of following different equipment/MS flat with one coat of red oxide primer & two coats of standard make bus green synthetic enamel/ aluminium paint of first quality as burger Luxol /Asian after cleaning of rust, dust and oily surface work shall be done as per technical specification under direction and supervision of concern AE/JE, with all coast of men, material T&P etc. as required for satisfactory for completion of the work.

Earthing strip 75x10mm size in Green colour

Earthing strip 50x6mm size in Green colour

Providing of Post Top Lantern Fitting complete with LED Lamp having clear acrylic covered on cast aluminium capsule finished suitable for 40 mmdia pipe CGL/CROMPTON/ PHILIPS/BAJAJ/HAVELS make. at 220 KV substation Gomtinagar.

Electrical Safety Processing Fees needed for providing all relvant safety clearance documents from Electrical Safety Department for energisation of the above commissioned 100 MVA Transformer and its accessories (Note: The amount payable is actual rate of challan or quoted rate, whichever is lower).

100 MVA Power Transformer

All LA (220/33 KV) associated with newly commissioned 100 MVA Transformer

HT Inspection.

CCTV camera

Providing and fixing of outdoor Static (Bullet) IP 2MP CCTV Network camera having resolution 1920x1080,full HD 1080p video, 140 dB, WDR ,3d DNR smart heater ,Image sensor 1/2.8", progressive Scan CMOS,Shutter time 1/100000 Sec. Day and Night IR cut filter with auto Switch weather proof IP 67 protection,IR range 100-120 Meter Model No DS-2CD4A25FWDIZ(H)(S) of Hikvision make or equivalent model of BOSCH/CAME make.

Providing and fixing of Full HD outdoor Dome IP 2MP CCTV camera having resolution 1920x1080,full HD 1080p video, digital WDR ,3d DNR smart heater ,Image sensor 1/2.8", progressive Scan CMOS,Day and Night IR cut filter with auto Switch weather proof IP 67 protection,IR range 50-70 Meter Model No DS-2CD432F-I(Z)(H)(S) of Hikvision make or equivalent model of BOSCH/CAME make.

Providing and fixing of 16 Channel Embedded plug and play NVR having 16 channel,2TB HD, SupportH.264+& h.264, 6 MP ,Integrated 16 Port PoE, HDMI, resolution 1920x1080p upto 2 SATA Interface, Model No7614NI-E2/16P of Hikvision make or equivalent model of BOSCH/CAME make.

Providing and Fixing of 32" Full HD LED TV (model No KDL-32W700B 80cm) of Sony make

Supply and fixxing of 3KVA on -Line UPS with isolation transformersuitable for single phase AC power supply and single phase output AC ,floor mounted type with 120 minut power backup APC make (modal No.SURTD3000XLI) or equivalent modelof standerd make.

Providing & fixing of 4TB Hard Disk of seagate make for storing the servilance data.

Providing & fixing of power supply board 24 Volt DC/24Amp AC of standard make.

Porviding & fixing of Power Over Eathernet (POE) Switch (08 Port), 10/1000 MBPS of D-Link make model No. DGS-1210-10P (08 Port) 10/100/1000 MBPS

Providing & laying 40 mm dia size HDPE pipe of standard make for laying of power supply cable/OFC/CAT-6 Data cable as per requirement.

Providing & laying of RG-60 3 GHZ Co-axial optical fiber cable of Fonolex/Standard make for CCTV wiring.

Providing & laying of Cat-6 Data Cable of D-link make for connecting PTZ Cameras to NVR.

Providing & lying of 3 core 1.5 Sq.mm multi Simad Copper Wire Power Cable of Finolex/Standard make as per IS alongwith providing & fixing of junction boxes whereever required.

Providing of Computer Table of Godrej make as per sample.

Earthing of Cameras & NVR as per technical specification (01 Job each)

Gupta Elect and Engg Works (BID ID -4831026)

MANAS ELECTRICALS (BID ID -4829338)

M/s S.S. Refregeration (BID ID -4831297)