SETC OF ELECTRICAL, MECHANICAL AND INSTRUMENTATION WORK WITH 05(FIVE) YEARS O&M AT TP-85 (SARTHANA-2)SEWAGE PUMPING STATION OF DRAINAGE DEPARTMENT.

Name of Work: - SETC OF ELECTRICAL, MECHANICAL AND

INSTRUMENTATION WORK WITH 05 (FIVE) YEARS O&M

AT TP-85 (SARTHANA -2) SEWAGE PUMPING STATION

OF DRAINAGE DEPARTMENT.

SCHEDULE-B2 OPERATION & MAINTENANCE WORK ..............................................................

1 The Schedule of quantities and Rates are to be read for the purpose of

pricing in conjunction with instructions to tenderers, technical

specifications, drawings and conditions for contract.

2 The price quoted in the summary of costs, sheets of schedule of

quantities and rates shall be of all-inclusive value for the work described

including all cost and expenses which may be required for the execution

of the work described together with all general risks, liabilities and

obligations set further or implied in the documents on which the tender

3 The quantities furnished are approximate. In the event of actual

quantities varying from those furnished herein or items deleted or added

the percentage (Plus / minus) quoted for the entire work shall remain

firm and no extra claims in this respect will be entertained. The payment

shall be made based on the actual quantities in the complete work.

4 Percentage (Plus/Equal/ Minus) quoted by tenderer shall be firm even if

the scope in the contract reduced/increased.

5 Percentage (Plus/Minus) and the total amount entertained in the

5 Percentage (Plus/Minus) and the total amount entertained in the

summary of cost, sheet of schedule quantities and rates shall be given on-

6 Detailed specifications of items of work are described in the Technical

Specifications. It gives guidelines to the reference of relevant clauses of

specification and mode of measurement. Tenderer shall read this in

conjunction with other technical specifications and quote rates

7 The Quality Assurance Plan provided shall be strictly followed.

Signature and Seal of The Contractor: Executive Engineer

Name and Address: Drainage Department

Date: Surat Municipal Corporation

SETC OF ELECTRICAL, MECHANICAL AND INSTRUMENTATION WORK WITH 05(FIVE)

YEARS O&M AT TP-85 (SARTHANA -2) SEWAGE PUMPING STATION OF DRAINAGE

I/We, the undersigned, hereby tender for carrying out the work described in the schedule

subjected to the conditions mentioned in various sections and subsections of this tender

Should this tender be accepted, I/We hereby agree to abide by and to fulfill all the terms and

provisions of specifications and conditions of contract and default thereof of forfeit and pay

to Municipal Corporation the sum of money mentioned in the said condition.

The Earnest Money Deposited by me / us with tender may be forfeited to The SURAT

MUNICIPAL CORPORATION, if I /We do not deposit security deposit in accordance

with the relevant clause of the conditions of contract, otherwise the said sum of

5,33,500.00/- (Without GST) shall be retained by the Municipal Corporation as any

account of such security as, aforesaid.

Signature and Seal of The Contractor: Executive Engineer

Name and Address: Drainage Department

Date: Surat Municipal Corporation

3 . NAME OF WORK: -

SETC OF ELECTRICAL, MECHANICAL AND INSTRUMENTATION WORK WITH

05(FIVE) YEARS O&M AT TP-85 (SARTHANA -2) SEWAGE PUMPING STATION

OF DRAINAGE DEPARTMENT.

ESTIMATED COST: 5,33,46,300.00 /- [Excluding GST]

TENDERER’SBIDFORCAPITAL WORK:

PERCENTAGEEQUAL/ ABOVE/BELOWOF Rs.4,22,48,300.00/-

INFIGURES:(STRICTLY ONLINE)

INWORDS: (STRICTLY ONLINE)

TENDERER’SBIDFORO&M WORK:

PERCENTAGEEQUAL/ ABOVE/BELOWOF Rs. 1,10,98,000.00 /-

INFIGURES: (STRICTLY ONLINE)

INWORDS: (STRICTLY ONLINE)

Signature and Seal of The Contractor: Executive Engineer

Name and Address: Drainage Department

Date: Surat Municipal Corporation

4. SCHEDULE- B ABSTRACT

Sr. No. Description Total Amount

Sr. No. Description Total Amount

A Electro-Mechanical (Capital) Work for TP-85 SPS

B O&M Work for TP-85 SPS

Total Amount of Schedule A+B

Total Amount of Schedule A+B

(Excluding GST)

SCHEDULE-B1 ELECTRO-MECHANICAL WORK

SR. DESCRIPTION UNIT QTY. UNIT TOTAL

MECHANICAL ITEMS

1 NON CLOG SEWAGE Set 6 9,91,824.44

SUBMERSIBLE PUMP SETS

Supply, Installation, Testing and

Commissioning of Non Clog

sewage Submersible Pump Sets

having with motor as per

Suitable for Capacity:400 LPS,

2 KNIFE GATE VALVE Set 6 74,533.90

Supply, Installation, Testing and

Commissioning of Knife gate

valves for the discharge line of

Pump Sets as per Tender

Size: 400 mm Dia

Mode of Operation: Manually

Location: Delivery line

3 NON RETURN VALVE Set 6 83,088.66

Supply, Installation, Testing and

Commissioning of Non Return

Valve for the discharge line as

per Tender Specification.

Size: 400 mm Dia size

Location: Delivery line

4 C.I. DISMANTLING JOINT Nos. 6 25,633.90

Supply, Installation, Testing and

Commissioning of C.I.

Dismantling Joint as per IS

Design Temperature: 50 °C

Size: 400 mm Dia size

Location: Delivery Line

5 MECHANICAL COARSE Nos. 1 42,87,220.70

(A) Supply, Installation, Testing

and Commissioning of Multi

Rake Type Coarse bar screen for

SPS as per Detailed Tender

1) Channel Width: As per Site

2) Channel Depth: As per Site

3) Bar Spacing: 20 mm

4) Angle of Inclination: As per

7) Avg. Flow: 43.61 MLD

8) Peak Factor:

9)Peak Flow: 98.12 MLD

6 LIFTING ARRENGMENT Kgs. 3000 243.16

Supply, Installation, Testing and

Commissioning of Lifting

Arrangement screen S.S material

for SPS as per Detailed Tender

7 C.I. FITTINGS & SPECIALS Kgs. 10000 58.58

Supply, Installation, Testing and

Commissioning of C.I. as per

detailed Tender Specification.

8 KNIFE GATE VALVE Nos. 1 11,87,711.86

Supply, Installation, Testing and

Commissioning of Knife gate

valves for the Common Header

as per Tender Specifications.

Size: 1200 mm Dia

Location: Common Header

Mode of Operation:

Electrically Operated

9 NON RETURN VALVE Set 1 6,46,919.95

Supply, Installation, Testing and

Commissioning of Non Return

Valve for the discharge line as

per Tender Specification.

Size: 1200 mm Dia size

Location: Common Header

10 C.I. DISMANTLING JOINT Nos. 1 2,51,553.67

Supply, Installation, Testing and

Commissioning of C.I.

Dismantling Joint as per IS

Design Temperature: 50 °C

Size: 1200 mm Dia size

Location: Common Header

11 AIR VALVE Set 1 41,866.52

Supply, Installation, Testing and

Commissioning of Air valve for

Common header line as per

Detailed Tender Specification

Size: 200 mm Día

12 5 TON HOT Set 1 6,32,512.50

Providing & erecting H.O.T.

crane with electrically operated

hoist, geared travelling trolley

with Fifteen meter or as per site

requirement lift complete with

long control panel & down

pendant control block, brake,

safety device, cables form motor

to starter panel & other required

accessories & tested as per IS

Specifications.

Capacity: 5 Ton,

Span: as per site.

13 3 TONNE HOT Set 1 5,59,792.50

Providing & erecting H.O.T.

crane with electrically operated

hoist, geared travelling trolley

with Fifteen meter or as per site

requirement lift complete with

long control panel & down

pendant control block, brake,

safety device, cables form motor

to starter panel & other required

accessories & tested as per IS

Specifications.

Capacity: 3 Tonne, Span: as

14 M.S. FABRICATION WORK Kgs. 7400 98.98

For I Beams, Grating at Various

Opening, ISMB / Girder

Channels, distance piese for EOT

Crain, Transformer fencing etc.

15 S.S. FABRICATION WORK Kgs. 35000 243.16

Various S.S Fabrication Work at

Pumping Station, double flanged

suction, delivery line & Common

header pipe, Fasteners, Grills,

Jalisa, fixed screen for Fittings

for Manual Screen and Ladder

16 C.I. WALL THIMBLE Nos. 4 8,96,949.15

MOUNTED SLUICE GATE

Supply, Installation, Testing and

Commissioning of Wall Thimble

mounted sluice gate as per

Detailed Tender Specification.

Size: 1800 mm (w) x 1800 (h)

Mode of Operation:

Electrically Operated

17 ULTRASONIC LEVEL Nos. 1 60,320.23

TRANSMITTER WITH

Design, Supply, Installation,

Testing and Commissioning of

Non Contact Ultrasonic Type

Level Transmitter with Display

as per Detailed Tender

Range: 0 - 15 Mtr.

18 LEVEL INDICATOR Nos. 1 17,895.18

Supply, Installation, Testing and

Commissioning of Float and

board type level Indicator with

all accessories as per Detailed

Tender Specification

Range: 0 - 15 Mtr.

19 Supplying & Fixing SMC Sq. 20 5,897.37

Chequered plate having 12 mm Mtr

thickness, made out of SMC

Confirming to IS 13410 & by

Hot press Compression Moulding

technique Suitable cut & fixed

with MS Angle Frame to Fit

Trench Widths as per site

requirement approved. by

engineer in charge.

20 Supply, Installation, Testing & Sq. 40 580.15

Commissioning of FRP Mtr

Chequred Plate.

21 Supply, Installation, Testing and Rmt. 40 1,784.69

Commissioning of Railing as per

Detailed Tender Specification

22 ELECTROMAGNETICFLOW No. 1 6,19,352.20

Supply, Installation, Testing and

Commissioning of

Electromagnetic Flow Meter for

Common Header as per Detailed

Tender Specification.

23 DEWATERING PUMP Nos. 1 1,64,952.19

Supply, testing & commissioning

of Dewatering Pump.

Capacity: 10 LPS, 18 Mtr.

24 Supplying & erecting approved Nos. 1 15,129.77

make self-priming domestic

Monoblock water pump with

H.P motor, suitable for operation

on 230 volts, 50c/s. AC supply

with metallic flange, and M.S.

impeller delivery for lifting line

water to over head tank

25 Supply, Installation, Testing and Nos. 1 12,711.86

Commissioning of Grass Cutter

with 30 meter cable for SPS

26 Supply of Aluminium Self Nos. 1 4,661.02

Supported "A" Type ladder (8

27 Flexible Garden Pipe Feet 100 29.66

28 PRESSURE GAUGE Nos. 6 3,042.12

Design, Supply, Installation,

Testing and Commissioning of

Diaphragm sealed Pressure

Gauge. (Each Pump sets)

Range: 150 mm Dial- 0 to

29 PRESSURE TRANSMITTER Nos. 1 29,438.47

Design, Supply, Installation,

Testing and Commissioning of

Pressure Transmitter. (Common

30 TOOLS & TACKELS Lot 1 51,713.42

SETC of various tools and

tackles as described in Technical

31 Construction of Necessary size M No 2 73,343.17

20 Grade RCC Chamber with all

requires materials for Installation

of Common Header Valves &

32 CLAMP ON ULTRASONIC 0 Nos. 1,84,018.97 -

Supply, Installation, Testing

and Commissioning of Clamp

on Ultrasonic Flow Meter for

Common Header as per

Detailed Tender Specification.

ELECTRICALS ITEM

1 11 KV TWO POLE Lot 1 1,21,869.63

Supply Installation Testing

Commissioning of 11 KV Two

Pole Structure.

2 HTMC PANEL Lot 1 5,80,136.00

Supply Installation Testing

Commissioning of HTMC Panel.

3 11 KV H.T. CABLE Mtr. 100 1,088.78

Supply, laying, connection,

testing and commissioning of

Size: 3 c x 185 sq.mm XLPE (E)

4 H.T. CABLETERMINATION: Nos. 10 8,880.93

Heat shrinkable type outdoor

H.T. cable end terminations

suitable for 11 KV, 3c x

sq.mm. XLPE (E) armoured

5 11 KV HT PANEL Nos. 1 10,00,710.02

SETC of 11 KV indoor,

extensible type, draw out type

Single HT vacuum circuit

breaker panel (1 No. Incomer +

6 DISTRIBUTION No. 2 11,01,130.28

11/0.433 KV, 800 KVA ONAN

outdoor type step-down

transformer as per tender

Specifications, Data sheet, IS

1180 and relevant and as per

given description etc.

7 CAPACITOR FOR KVAR 160 287.85

Fixed Capacitor for Transformer

- 80 KVA - 2Nos.

8 Foundation for Transformer Set 2 69,361.91

9 Fire Protection Wall for Set 1 68,486.90

10 POWER CONTROL CENTER No. 1 23,85,519.00

Supply, erection, testing &

commissioning of Power Control

Centre panel as per tender

Specifications, Data sheet, IS and

as per given description etc.

11 STARTER PANEL Nos. 6 3,81,578.00

Supply, erection, testing &

commissioning of Soft Starter

with Capacitor Bank as per IS,

specifications and technical

specification & data sheet

Suitable for Capacity: 400 LPS,

12 JUNCTION BOX Nos. 6 19,695.00

Supply, erection, testing &

commissioning of Junction Box

for Pumps as per tender

Specifications, Data sheet, IS and

as per given description etc.

13 APFC PANEL No. 1 4,47,144.17

Supply, erection, testing &

commissioning of APFC panel as

per tender Specifications, Data

sheet, IS and as per given

description etc.

14 Supply, laying, connection, Mtr 300 1,223.11

testing and commissioning of

heavy duty, 1.1 KV XLPE AL

conductor armordered.

Location: Transformer to Main

Size: 3½ c x 400 sq.mm(4 Run)

15 - Do as above - Mtr 400 427.23

Location: LT PCC Panel to

Size: 3½ c x 120 sq.mm (2 Run)

16 - Do as above - Mtr 400 357.54

Location: MCC Panel to JB to

Size: 3 c x 120 sq.mm (2 Run)

17 - Do as above - Mtr 60 790.83

Location: LT PCC Panel to

Size: 3½ c x 240 sq.mm (2 Run)

18 Supply, laying, connection, Mtr 100 297.95

testing and commissioning of

XLPE Copper conductor

armoured-for industrial socket,

External LDB, Instrument panel

Size: 4 c x 10 sq.mm.

19 Supply, laying, connection, Mtr 100 86.86

testing and commissioning of

XLPE Copper conductor YWY-

Size: 3 c x 2.5 sq.mm.

20 Supply, laying, connection, Mtr 100 142.41

testing and commissioning of

XLPE Copper conductor YWY-

Industrial points

Size: 4 c x 4 sq.mm.

21 Supply, laying, connection, Mtr 400 97.97

testing and commissioning of

XLPE AL conductor armoured-

for Street Light in SPS

Size: 4 c x 10 sq.mm.

22 Supply, laying, connection, Mtr 400 81.81

testing and commissioning of

PVC CU conductor Unarmoured-

for Street Light in SPS

Size: 4 c x 2.5 sq.mm.

23 Supply, laying, connection, Mtr 250 347.46

testing and commissioning of

XLPE Copper conductor YWY-

Actuator panel and other

panel/work as per IS

Size: 16 c x 1.5 sq.mm.

24 Supply of FRLS PVC Insulated Mtr 500 42.47

ISI Mark Cu Conductor Two

Wire 1.5 Sq. mm. for

Electrification work of Pumping

25 CABLE TERMINATION Nos. 16 1,532.17

Supply of connection, testing and

commissioning of Double

compression brass/steel cable

glands and crimping type

bimatlic lugs / sockets with

necessary tools and equipments

as specified in specifications and

Termination Using Double

compression brass/steel cable

glands and crimping type

bimatlic lugs / sockets of heavy

duty, 1.1 KV XLPE AL

conductor armordered -

Transformer to Main LT PCC

Size: 3½ c x 400 sq.mm (4 Run)

26 - Do as above - Nos. 32 460.56

Location: LT panel to MCC

Size:3½ c x 120 sq.mm (2 Run)

27 - Do as above - Nos. 32 444.40

Location: MCC PANEL to JB to

Size:3 c x 120 sq.mm (2 Run)

28 - Do as above - Nos. 4 904.96

Location: LT panel to APFC

Size:3½ c x 240 sq.mm (2 Run)

29 Termination Using Double Nos. 20 153.52

compression brass/steel cable

glands and crimping type

bimatlic lugs / sockets of XLPE

Copper conductor armoured-for

industrial socket, External LDB,

Instrument panel

Size: 4 c x 10 sq.mm.

30 Termination Using Double Nos. 20 89.89

compression brass/steel cable

glands and crimping type

bimatlic lugs / sockets of

XLPE/PVC Copper conductor

YWY- other work

Size: 4 c x 2.5 sq.mm.

31 Termination Using Double Nos. 20 85.85

compression brass/steel cable

glands and crimping type

bimatlic lugs / sockets of

XLPE/PVC Copper conductor

YWY- other work

Size: 3 c x 2.5 sq.mm.

32 Termination Using Double Nos. 20 132.31

compression brass/steel cable

glands and crimping type

bimatlic lugs / sockets of XLPE

Copper conductor YWY-

Industrial points.

Size: 4 c x 4 sq.mm.

33 Termination Using Double Nos. 20 129.28

compression brass/steel cable

glands and crimping type

bimatlic lugs / sockets of XLPE

AL conductor armoured-for

Street Light in SPS.

Size: 4 c x 10 sq.mm.

34 Termination Using Double Nos. 18 415.25

compression brass/steel cable

glands and crimping type

bimatlic lugs / sockets of XLPE

Copper conductor YWY-

Actuator panel and other

panel/work as per IS

Size: 16 c x 1.5 sq.mm.

35 Providing & laying. R.C.C. Mtr. 10 342.37

Hume pipe for cable to be laid

cms. below ground across the

road crossing or on floor with

necessary material in an

approved manner and making the

ground as per original. (A)

36 Providing & laying. R.C.C. Mtr. 10 262.77

Hume pipe for cable to be laid

cms. below ground across the

road crossing or on floor with

necessary material in an

approved manner and making the

ground as per original. (B)150

37 Making trench in soft soil of Rmt. 50 46.22

suitable width of 90 cms deep for

laying cable or locating the fault

all over the run and backfilling

the same and making the surface

as normal ground.

38 MAINS WIRING: Rmt. 300 58.20

Mains with 1.1kV grade FRLS

PVC insulated ISI marked

stranded copper conductor wire

in following type of pipe to be

erected concealed in /flushed on

wall/ ceiling with 1.5 sq. mm

copper conductor FRLS PVC

insulated stranded wire of green

colour for earth continuity of

following size.

(A) with medium class Rigid

PVC pipe and accessories

(a) 2 wire 1.5 sq. mm

39 (b) 2 wire 2.5 sq. mm Rmt. 100 77.03

40 (f) 4 wire 2.5 sq. mm Rmt. 70 119.83

41 Point wiring for Light/ Bell with Nos. 25 418.55

2-1.5 sq. mm & earth wire of

sq.mm (Green) both are of ISI

marked 1.1kV grade FRLS PVC

insulated multistrand copper

wires, in following type of pipe

to be erected concealed in/ on

surface on wall/ ceiling complete

with 6A Modular type switch/

bell push & accessories and earth

continuity of following type,

erected on PVC/ Metallic box,

single mounting base frame

covered with textured/ metallic

front plate modules erected on/ in

wall/ ceiling as per pipe erected,

with necessary Lamp holder/

ceiling rose/ H.D. Connector as

(a) with medium class Rigid

PVC pipe and accessories, Cat.

42 Point wiring for FAN with 2-1.5 Nos. 5 598.30

sq.mm & earth wire of

sq.mm (Green) both are of .ISI

marked 1.1 KV Grade FRLS

PVC insulated multistrand

copper wires, in below type of

pipe erected with 6A Modular

type switch and hum free EME

four or more step type electronic

fan regulator with separately

mounted and accessories with

earth continuity of following type

erected on PVC /

Metallic/Wooden box, single

mounting base frame covered

with textured/metallic front plate

modules erected on / in wall /

ceiling as per pipe erected. with

necessary ceiling rose / H.D.

Connector as directed.

(a) with medium class Rigid

PVC pipe and accessories, Cat.

43 Point wiring for Individual Plug Nos. 10 444.23

with earth wire of 1.5 sq.mm

(Green) both are of ISI marked

1.1kV grade FRLS PVC

insulated multistrand copper

wires, in following type of to be

erected concealed in/ on surface

of wall/ ceiling complete with

Modular type switch & 5 pin

Plug erected on PVC/ Metallic

box covered with appropriate

front plate modules erected on/ in

wall/ ceiling as per pipe erected

with following type of

For 6A Plug with 2-1.5 sq.mm

Cu. Wire with medium class

Rigid PVC pipe and

accessories, , Cat. III

44 For 16 A Plug with 2-2.5 sq.mm Nos. 5 668.48

Cu. Wire with medium class

Rigid PVC pipe and accessories,

45 For 16 A Plug with 2-4 sq.mm Nos. 5 788.31

Cu. Wire with medium class

Rigid PVC pipe and accessories,

46 Point wiring for looped plug with Nos. 5 240.52

6A Modular type switch & 5 pin

socket erected on PVC/ Metallic

box, single mounting base frame

covered with textured/ metallic

front plate modules erected on/ in

wall/ ceiling with following type

47 Point wiring for looped plug with Nos. 5 466.10

16A Modular type switch & 5 pin

socket erected on PVC/ Metallic

box, single mounting base frame

covered with textured/ metallic

front plate modules erected on/ in

wall/ ceiling with following type

48 Point wiring for secondary light Nos. 4 120.69

point with 2-1.5 sq.mm & earth

wire of 1.5 sq.mm (green) both

are of ISI marked 1.1kV grade

FRLS PVC insulated multistrand

copper wires, in following type

of pipe to be erected concealed

in/ flushed on wall/ ceiling,

complete with earth continuity

and necessary connection with

primary light with accessories

erected on Metal/ PVC box

covered with 3 mm thick PC

(Polycarbonate)/ Acrylic sheet

for open/ concealed wiring with

necessary Lamp holder/ ceiling

rose/ H.D. Connector as directed.

Note: - Maximum up to 6 mtrs

length, excess will be considered

Mains for Secondary Point.

(A) with medium class Rigid

PVC pipe and accessories.

49 Point wiring for Two way Nos. 2 528.97

controlled Light Point with 2-1.5

sq.mm & earth wire of 1.5 sq.

mm (green) both are of ISI

marked 1.1kV grade FRLS PVC

insulated multistrand copper

wires, in following type of pipe

to be erected concealed in/

flushed on wall/ ceiling complete

with 6A Ticino type ISI marked

accessories with earth continuity

erected on Metal/ PVC box

covered with 3 mm thick PC

(Polycarbonate)/ Acrylic sheet

with necessary Lamp holder/

ceiling rose/ H.D. Connector as

(A) with medium class Rigid

PVC pipe and accessories.

50 One industrial metal clad Nos. 2 593.22

switched socket outlet point

controlled with MCB with

powder coated enclosure &

related accessories to complete

(63 A x 3 pin 250 volt)

51 UPVC or better material made Nos. 2 331.51

switch boards with required

Surface Mounted 12 Module

52 UPVC or better material made Nos. 4 330.51

switch boards with required

Surface Mounted 8 Module

53 UPVC or better material made Nos. 8 258.91

switch boards with required

Surface Mounted 4 Module

54 UPVC or better material made Nos. 10 156.78

switch boards with required

Surface Mounted 2 Module

55 Supplying and erecting Approved Nos. 15 588.88

make of LED Surface mounted

luminaire with rear reflector

suitable for office and laboratory

(a) With 20 watt LED lamp

56 Supplying and erecting R&B Nos. 10 415.25

approved make of LED

Downlighter surface mounted for

Indoor application

(a) With 10 watt LED lamp

57 Providing & erecting Approved Nos. 4 2,311.02

make Ceiling Fan with double

ball bearing ISI mark with

Condenser 230 volt A.C.50 Hz

1200 mm sweep High speed

complete having 3 blades

aluminium body and blade sets

having ornamental design shanks,

canopy & 30 cms. down rod

erected with 24/0.2, 3 core

flexible wire with earthing.

58 Supplying & erecting single No. 2 3,937.29

phase approved make industrial

exhaust fan suitable for medium

duty ring mounted low noise

operation suitable for medium

duty having following Dia size

and maximum speed in RPM [E]

450 mm Dia 1400 RPM Cat.II

59 Supplying and erecting approved No. 2 2,139.83

make Pedestal Circulatory fan

mm. sweep and adjustable height

complete with guard & standard

lead flexible wires and plug top.

60 Supplying and erecting LED well Nos. 5 1,576.00

glass with die cast aluminium

housing with polycarbonate

cover robust construction

industrial type fitting with IP-66

Protection. (40 watt)

61 Supplying and erecting LED Nos. 8 6,565.00

street light IP 65. 90 - 120 watt

62 Providing and erecting heavy Nos. 6 8,452.33

duty flood light Luminaire with

High Pressure die Cast Housing

(b) With 150 watt LED lamp

63 Providing and erecting Sheet Nos. 2 2,338.41

Steel powder coated MCB

distribution board-flush/ surface

mounted fitted with bus bar,

neutral link, earth bar and DI

Nrail, Conforms to IS 8623-1 &

3, IEC 61439 - 1 &3 without

MCB to house appropriate nos.

of MCBs. (The DBs should be

used of same company of MCB

to be used) suitable for three

phase incoming and single phase

horizontal type outgoing Per

phase isolation type (PPI)

sheet steel double door - 4 Way

64 Incomer: 63 A TPN MCB (C Nos. 1 736.10

65 Outgoing: 16 A TPN MCB (C Nos. 4 594.87

66 Providing and erecting Sheet Nos. 2 1,491.03

Steel powder coated MCB

distribution board-flush/ surface

mounted fitted with bus bar,

neutral link, earth bar and DI

Nrail, Conforms to IS 8623-1 &

3, IEC 61439 - 1 &3 without

MCB to house appropriate nos.

of MCBs. (The DBs should be

used of same company of MCB

to be used) suitable for single

phase incoming and horizontal

single phase outgoing

sheet steel double door - 12 Way

67 Incomer: 32 A TPN MCB (C No. 1 594.87

68 Outgoing: 10 A DP MCB (C Nos. 12 299.58

69 Providing and erecting Sheet Nos. 2 628.25

Steel powder coated MCB

distribution board-flush/ surface

mounted fitted with bus bar,

neutral link, earth bar and DI

Nrail, Conforms to IS 8623-1 &

3, IEC 61439 - 1 &3 without

MCB to house appropriate nos.

of MCBs. (The DBs should be

used of same company of MCB

to be used) suitable for single

phase incoming and horizontal

single phase outgoing

sheet steel double door - 4 Way

70 Incomer: 63 A TPN MCB (C Nos. 1 736.10

71 Supplying & erecting approved Nos. 1 1,942.97

make RCCB + MCB

(Electromagnetic type only

working on residual current

device having 10 KA short

circuit breaking capacity and

30m Amp. Sensitivity & 30 mili

sec. tripping time conforming to

IS 12640 test knob facility trip

free mechanism operating for

rated leakage at nominal ten volt,

complete erected including all

materials lugs screws etc.

completed. 32A / 40A, 2 pole

Single Phase Cat. II

72 Outgoing: 16 A DP MCB ( C Nos. 12 299.58

73 Approved make Earth fault Relay Nos. 4 4,686.23

suitable to mount with inter

connection to moulded case

circuit breaker having CT ratio &

MCCB rating as following along

with shunt trip 220V AC. with all

internal connections & complete

erected in M.S. housing. (1) 15 A

-100 A, CT Ratio 1/100 or

higher/as per SMC officer direct

74 Approved make RCCBs Nos. 4 1,968.64

conforming to IS: 12640 and

having sensitivity of 30 mA and

Short Circuit withstand capacity

of 10 KA and suitable for

operation on single phase 240 V.

having characteristic of quick

action & tripping with all

advance feature & do not

incorporate any electronic

component. for following Max.

rating erected as directed (i)

Amps. DP Cat. III

75 Approved make RCCBs Nos. 4 2,567.80

conforming to IS: 12640 and

having sensitivity of 30 mA and

Short Circuit withstand capacity

of 10 KA and suitable for

operation on single phase 240 V.

having characteristic of quick

action & tripping with all

advance feature & do not

incorporate any electronic

component. for following Max.

rating erected as directed (i)

Amps. FP Cat. III

76 Supplying & fixing box for Nos. 5 273.90

housing ELCB / ELCB + MCB

combination made of 18 SWG

sheet steel duly powder coated

with gasket, dust & vermin proof

bakelite shield two earthing

terminals for following type of

RCCB, ELCB, ELCB + MCB [a]

77 Supplying & fixing box for Nos. 5 445.08

housing ELCB / ELCB + MCB

combination made of 18 SWG

sheet steel duly powder coated

with gasket, dust & vermin proof

bakelite shield two earthing

terminals for following type of

RCCB, ELCB, ELCB + MCB [a]

78 Providing and fixing approved Nos. 10 6,873.14

make Octagonal poles. Made

from sheet steel. The pole should

be made as per IS. and shall be

coated with hot dip galvanizing

as per IS 2629/4759. with

required base plate suitable

suspend local wind speed to be

erected on existing foundation.

5 Mtr. Long 70 mm Top X

mm bottom dia, 3 mm thickness

79 SETC of cement concrete Nos. 8 1,694.92

foundation or for concrete filling

in 1:3:6 ratio with 20 to 25 mm

stone metal duly plastered with

necessary curing for pole muffing

or any other purpose and with

necessary J Bolts. Size:500x500

80 Spike Type earthing for poles Nos. 8 635.59

with 1-meter-long G.I. wire of

81 Supply, Installation, Testing and Nos. 8 795.16

Commissioning of Street Light

pole Single Arm Backet Size:

82 Supply, Installation, Testing and Nos. 8 683.03

Commissioning of Street Light

pole Single Arm Backet Size:

83 Providing & laying approved Rmt. 70 61.63

make 50 mm dia. Double walled

corrugated pipes (DWC) of

polyethylene (conforming to IS

14930 II) with necessary

connecting accessories of same

material at required depth for

laying of cable. below ground /

road surface for enclosing cable

and back filling the same to make

ground as per original.

84 Supplying & erecting in earth pit Nos. 2 10,592.16

of minimum bore dia. 225mm

size ASH or approved make Safe

Earthing Electrode consisting

Pipe in- Pipe Technology as per

IS 3043-1987 made of corrosion

free G.I. Pipes having Outer pipe

dia. of 80 mm having 80-200

Micron galvanising, Inner pipe

dia. of 40 mm having 200-250

Micron galvanising, connection

terminal dia. of 14 mm with

constant ohmic value surrounded

by highly conductive compound

with high charge dissipation

suitable for following type of

(a) For Electrical Installation

covering Transformer Neutrals,

Lightning arrester Earthing,

Instrumentation (like PLC Panel,

SCADA)i.e. independent

Earthing located in other than

normal soil i.e. Soft Rock,

Marshy Soil etc..

-Length of Pipe: 3 Mtrs.

-Back filling Compound:2 nos.

85 Supplying & erecting funnel type Nos. 4 2,311.02

earthing having earth plate of

following size burred in

specifically prepared earth pit

mtr. below ground with 40 kg.

charcoal and salt with alternate

layers of charcoal & salt,

20mm.dia. G.I. pipe with Funnel

with a wire mesh for watering &

bricks masonry block, C.I. Cover

complete as per para 7.3 of IS

3043 with necessary length of

double Galvanised Iron / copper

earth wire No 6 SWG bolted with

lug to the plate and covered in

mm dia. G.I. pipe 2.5 mtr long

complete connected to the nearest

switch gear with end socket as

per direction & duly tested by

earth tester confirming to IS with

following specification

(A) With 30 x 30 x 0.35 cms: C.I.

Copper earth Plate

87 Supply & election required size kg 70 794.31

Copper strip for earthing of H.T.

OCB / ACB/ Transformer, LT

panel board, Motors etc. using

88 Supply & erection required size kg 100 77.03

HOT deep Galvanised iron strip

for earthing of H.T., OCB/ ACB/

Transformer LT panel board,

Motors etc. using proper clamp.

89 Supply & erection HOT deep kg 120 77.03

Galvanised iron strip wire

90 Supply & laying GI perforated Rmt 150 703.97

type cable trays with returned

edge/ flange, fabricated from

mm thk. sheet steel in the

standard length of 2.5 mtrs, duly

hot dipped galvanized after

fabrication as per IS 2629-1989 /

IS 4759-1984 including

accessories such as coupler

plates/ fish plates, bends, tees,

reducers, elbows, covers and

electro-galvanized hardware etc,

erected on existing support as per

specification and instruction of

engineer in charge.

94 Supply of necessary materials kg 800 98.98

and M.S. fabrication work (For

ISMB, Square bar, flats,

Chequered plates, For C

channels, angles etc for ladder,

grills etc.) with oil paint as per

details specification.

95 4.5 Kg. Co2 type Portable fire Nos. 5 6,590.68

extinguisher with necessary

clamps, supports and trolley.

96 Providing pair of rubber hand Nos. 4 213.98

gloves suitable for working on

11kV/ 22kV supply.

97 Supplying rubber matting of 6 Sq. 4 983.58

mm thickness as per IS 5424 and Mtr

of required length and breadth

with good insulation property.

98 Supplying rubber matting of 12 Sq. 4 3,081.36

mm thickness as per IS 5424 and Mtr

of required length and breadth

with good insulation property.

99 Warning signs (11 KV & 415 V) Nos. 2 448.64

100 Supplying stand first AID box No 2 299.58

with antiseptic cream, medicine

for use on wounds due burn,

crepe bandage, gauge bandage,

medicated ready to use bandage

(Band-aid) adhesive tape for

medicinal user, Scissors, anti-

septic solution (savlon or similar)

etc. (All above contents shall be

of standard makes)

101 Providing printed instruction Sets 2 128.39

chart both in English and

Gujarati and duly framed with

front glasses for treatment of

person suffering from Electric

102 Supplying and erecting floor Nos. 8 1,155.51

mounting stand for keeping four

nos. of FIRE buckets comprising

1500 mm in length, 900 mm

height frame made out of 30mm

X 30 mm X 4 mm angle iron

with cross supports for legs,

welded with 4 hooks and duly

painted with one coat of red lead

and two coats of approved

enamelled silver paint.

103 SETC of 10 W LED lamp Nos. 4 1,251.40

operated self-contained

emergency light with dry type

maintenance free battery.

104 LIASONING CHARGES Job 1 20,690.85

Liasoning fees for preparing

necessary documents and

drawings for getting N.O.C from

supply co and Electrical

Inspector for charging the

installation.( All statutory fees

will be paid by SMC ).

105 LIASONING CHARGES Job 1 20,690.85

Liasoning fees for preparing

necessary documents and

drawings for getting N.O.C from

factory Inspector for factory

licence of premises. (All

statutory fees will be paid by

106 Cup Board Nos. 1 7,252.21

107 Table Nos. 1 4,665.85

108 Heavy Duty Office Chair Nos. 4 3,113.76

109 Safety Helmet Nos. 3 129.45

110 Safety Belt Nos. 3 796.59

111 Safety Shoes Pair Nos. 3 269.18

112 AUTOMATION Lot 1 1,92,942.44

PLC Based Auto-Operation

system of Pump sets along with

KVA UPS and battery back up as

directed by Engineer in Charge at

sewage Pumping Station along

with 1 KVA UPS and battery

113 Supply of Desktop PC with UPS No. 1 77,600.96

and other accessories as per

detailed technical specifications

114 Supply, Installation, Testing and No. 1 3,630.90

Commissioning of Voltage

Stabilizer and other accessories

as per Tender specification.

115 Development of graphics of SPS Job 1 26,897.83

& connecting automation system

of SPS to SCADA Room.

116 CCTV CAMERA SYSTEM Job. 1 67,196.63

Supply, Installation, Testing and

Commissioning of 7 Nos. CCTV

camera System for Sewage

Pumping Station.

117 Supply of SCADA runtime No. 1 98,540.44

software with lifetime license

(for 15 displays)

118 Supply, Installation of Biometric No. 1 15,296.61

Attendance System as per

detailed Tender Specifications.

119 INFORMATION BOARD AT Lot 2 3,672.68

PUMPING STATION

Supply of Pumping Station

information board with printed

eco vinyl sheet with wooden

frame, size 8 x 4 feet

TOTAL ESTIMATED AMOUNT OF CAPITAL WORK

SCHEDULE-B2 OPERATION & MAINTENANCE WORK

DESCRIPTION QTY UNIT RATE TOTAL RATE

All in all Operation & Maintenance

Cost (Manpower, Fixed Cost,

Machineries Maintenance & Variable

1 Cost) for Normal Operational Period 60 Month 1,83,300.00

for Three Shift of TP-85

(SARTHANA-2) as per detailed

specification mentioned in tender

Painting work as instructed by

Engineer in Charge for TP-85

(SARTHANA-2) as per detail

specifications & scope of work.

TOTAL RATE OF OPERATION & MAINTENANCE WORK

Signature and Seal of The Contractor: Executive Engineer

Name and Address: Drainage Department

Date: Surat Municipal Corporation