ADDN ALTN TO BLDG NO P356 TO P361 TO ACCOMMODATE 41 MVH INCL PROVN OF CERTAIN INFRASTRUCTURE AND PROVN OF WIRE MESH BETWEEN ROOF AND WALL TO PREVENT ENTRY OF BIRDS INSIDE COY ANTE ROOMS AND TAB BLDG MANCHANDA SQASH COURT AND SOMNATH STADIUM AT IMA

Amount

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Demolition of reinforced cement concrete as in water tanks, in mangers or any position (other than ground floors) similar suspended work all as specified.

Demolition of old brick work or stone masonary built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L for Brick work with sub class 'B' bricks (old size) straight or curved on plan exc 6.00m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for Brick work with sub class ‘B’ bricks (old size), straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.

M&L for Walling of random, rubble, stone masonary, well bonded, bedded and solidly hearted and built in cement mortar (1:6) including demolition of stone masonry built in cement mortar complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in coping, of poles/stays benching, holdfast etc including weathering sliglitely rounded or chamfered including necessary use and waste of form work including demolition of existing old cement concrete (unreinforced) of any description and in any position for complete all as specified and directed.

Cutting chases, pinning in, making good to facings where reqd and pointing in cement motor (1:3) to ends or edges of landings, steps, cills, sunsheds, shelves, lintels, etc, and cutting chases for concealed water tubing or concilled conduit wiring, etc and making good exceed 20 cm girth in brick walls complete all as directed.

Taking up or down steel tubing and connection 15mm bore pipe complete all as specified and directed.

S&F MS tubes medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors for 15mm bore complete all as specified and directed.

S&F 1000 Litres capacity rotational moulded polyethylene water storage tanks, three layered, ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including 20mm dia GI light grade washout pipe 50mm long with plug and 20mm dia GI light grade over flow pipe 600mm long with fitting complete all as specified and directed.

S&F 500 Litres capacity rotational moulded polyethylene water storage tanks, three layered, ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including 20mm dia GI light grade washout pipe 50mm long with plug and 20mm dia GI light grade over flow pipe 600mm long with fitting including dismantling of existing unserviceable tank and removing from site complete all as specified and directed

Supply and fixed in repair 15mm bore gun metal gate or stope valve cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron or for union complete all as specified and directed.

S&F in 20 mm dia ball valve PTMT, high pressure with polythene float and fly nut complete, screwed for iron pipe complete all as specified and directed.

S&F fixed in repairs 20 mm bore dia gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

Taking down cement or cement lime plaster of any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc.

M&L for 5 mm thick plastering on ceiling in cement mortar 1:3 finished even and smooth without using extra cement complete all as specified.

M & L for rendering 15mm thick in cement mortar 1:6 finished fair faces of brick work even and smooth without using extra cememt in complete all as specified.

M & L for rendering 15mm thick on cement mortar 1:4 mixed with water proofing compound finished fair faces of brick/concrete surfaces even and smooth. The work will be carried out in Double storey building the rate of scafolding is included for this item also. WPC will be measured and paid separately.

M & L for applying one coat of wall putty 1.00 to 1.5 mm thick rubbing the surface till achieve smooth surface for preparation of old/ new surfaces of wall as per manufacturer’s instruction complete.

M&L for preparation of old decorated surfaces of walls (plastered) by brooming down with core wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and finally clean with sand paper all as directed by Engr-in-Charge.

M&L for applying two coats of weather proof exterior emulsion paint (Apex of Asian, weather coat of Berger) of any tint over a priming coat on wall, chajjas, facia incl Preparation of new / old plastered surfaces of waIl etc complete all as directed.

M&L for two coat oil bound distemper over a coat of primer any tint on walls complete all as specified in SSR Part I and directed by Engr-in-Charge. (Note : Applying coat after completion of surface as per item No 21 as above and stage has to be passed by Engr-in-charge before applying coat complete all as specified and directed.) Note:- OBD shall be applied by mechanical means i.c spray machine through authorised applicator of compay as approved by GE.

M&L one coat of oil bound distemper in any tint on walls complete all as specified in SSR Part I and directed by Engr-in-Charge (Note : Applying coat after completion of preparation of surface as per item No 21 as above and stage has to be passed by Engr-in-charge before applying coat complete all as specified and directed.) Note:- OBD shall be applied by mechanical means i.c spray machine through authorised applicator of company approved by GE.

M&L for one coat of white wash over old decorated surfaces of ceiling including preparation of surface complete all as specified.

M&L for preparation of new surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.

M&L for preparation of new surfaces of wall and applying three coats of white wash complete all as specified and as directed.

M&L for preparation of old surfaces of wall and applying two coats of white wash complete all as specified and as directed.

Preparation of old painted steel surfaces of any description, over 10 cm in width or girth and applying one coat of synthetic enamel paint with approved shade complete all as specified and directed.

Supply and fix in repairs of vitreous china squatting pan 'Orissa pattern' size 580 x 440 mm white with integral foot rest including replacement of cast iron 'P' or 'S' trap, concrete bedding and making good floor complete all as specified and directed.

Dismantling of cast iron or reinforced concrete drain pipes, 100mm bore, jointed in cement mortar and taking out of trenches, if required.

S&F for cast-iron soil, waste and vent pipe 100mm bore in any length with or without ears with cement joint fixed walls/floors complete all as specified and directed.

S&F cast iron soil, waste and vent pipe 75mm bore in any length without ears, with cement joints fixed in walls/floors including taking down complete all as specified and directed.

S&F cast iron bends (any radius) disminishing pieces or tapers (larger bore measured) of 100mm bore complete all as specified and directed.

S&F cast iron bends (any radius) disminishing pieces or tapers (larger bore measured) of 75mm bore complete all as specified and directed.

S&F for 100mm cast iron branch pieces, single (equal/unequal) ordinary or inverted (spigot or socket type) or with parallel branches

Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubish off the premises complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20mm graded crushed stone agg) as in flooring 25mm thick complete all as specified and directed..

M&L for screed bed or bedding layer of mortar 15 mm thick for laying floor finish in cement mortar 1:6 complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match the coloured tiles complete all as specified and directed.

M & L for Vitrified ceramic tiles light shade 8 to 9 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, laid in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including 15 mm thick screed bed or bedding layer in cement mortar 1:4 complete and dismantling of existing floor tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as directed.

M&L for Vitrified ceramic tiles light shade 8 to 9 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm,as in vertical surface such as skirting dado and riser to step floor etc set and jointed in neat cement slurry and pointed in coloured cement to match with and including 10 mm thick backing in cement mortar 1:4 finished rough surface to receive tiles including dismantling of existing tiling including cement mortar bedding and removing rubbish off the premises complete all as directed.

M&L for Glazed ceramic coloured tiles of size 450x300 x 7mm, as on vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in white cement to match laid over and including 10mm thick rendring in cement mortar 1:4 complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection or similar places and finishing the surface even & smooth with out using extra cement including making joints 12mm wide to the full depth of PCC at every 3 meter and every change of direction and filling the same with mixture of bitumen & sand in ratio (1:1) by weight including necessary form work etc and including demolition of existing old cement concrete, complete all as specified and directed.

Supply only liquid water proofing compound

Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) n.exc 1.50 Sqm each.

Taking down chowkats or frames exc 1.5 Sqm but n.exc 4 Sqm each with shutter (without taking off shutters from the frame).

S& F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantetc and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). → Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed . Make:- M/S Rajshree Plastiwood Ltd. Indore-452001 M/S Ecocell (Kumar Arch Teck) (N Gujrat)-382721 Navratan Speciality Chemicals LLP Ahmedabad Alstone Ind Pvt Ltd

S& F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately. Make:- M/S Rajshree Plastiwood Ltd. Indore-452001 M/S Ecocell (Kumar Arch Teck) (N Gujrat)-382721 Navratan Speciality Chemicals LLP Ahmedabad Alstone Ind Pvt Ltd

S& F Factory made extruded WPC (Wood Polymer Composite) Double Door Frame solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantetc and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). → Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed . Make:- M/S Rajshree Plastiwood Ltd. Indore-452001 M/S Ecocell (Kumar Arch Teck) (N Gujrat)-382721 Navratan Speciality Chemicals LLP Ahmedabad Alstone Ind Pvt Ltd

S& F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately. Make:-

M&L 30mm thick factory made solid WPC (Wood plastic composit) moulded gauged door shutter brown, minimum density of 600 kg/cum with wire mesh in any number of division with (Frame size bottom rail 200 to 250mm wide ,middele or lock rail rail 150mm to 250mm wide, Stiles, top and freeze rails 100 to 120 mm wide and glazing bar 75 mm wide, including stainless steel wire mesh shall be fixed with WPC bedding in side rails with screwing 8x28 heat metal zink coated screws can be remove or fix again of the shall be as per manufacture instruction complete all as specified and directed. Make:- M/S Rajshree Plastiwood Ltd. Indore-452001 M/S Ecocell (Kumar Arch Teck) (N Gujrat)-382721 Navratan Speciality Chemicals LLP Ahmedabad Alstone Ind Pvt Ltd

Material and labour for aluminum alloy powder coated standard hollow section as mentioned below window frame (Bombay sliding) with two glazed shutter andone nos wire gauged shutter sliding type, with aluminum sections as per Series-A(15mm) 3 track of Jindal section numbers for sliding windows, and glazed with tinted glass coloured glass 6mm thick, fixed with glazing clips, rubber beading / gasket anodised beading, screw and lock type handle of size 75mm, 2 Nos aluminum tower bolt 150mm long etc complete all as specified and directed. Shutter Top & bottom size : 37.50x15x1.60mm Shutter inner lock size 37.50x15x1.60 mm Shutter side (Handle) size 37.50x15x1.36 mm Chowkhat bottom size :75 x 26 x1.20mm Chowkhat top & sides size: 75 x 26 x1.20mm Make:- Jindal/Trishul Ind Meerut/Jangid Engg works Jaipur

S&F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified. Make:- Jindal/Trishul Ind Meerut/Jangid Engg works Jaipur

S&F Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodisedaluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified. Make:- Jindal/Trishul Ind Meerut/Jangid Engg works Jaipur

S&F 6 mm thick frosted/black colour tinted glass ordinary quality and fixed in side aluminium frame exc 0.5 Sqm in each pane complete all as specified and directed.

S&F for decorative aluminium grill weight not less than 3.13 Kg/Sqm (without frame) and 20x20mm aluminium cleat, screwed to main frame/fixed to wall with screws complete all as specified and directed.

S&F mild steel framed work such as grills, grating etc with end of bars shouldered and/ or riveted forged into spikes, framed guard bars, railings and similar work complete conforming to Fe-410-0 or Fe-310-0 complete all as specified.

S & F Galvanised, corrugated mild steel sheeting 0.63 mm with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275.as in roof covering, fixed with self tapping screws etc complete all as directed including dismantling existing CGI sheet.

S& F Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 fixed with self tapping screws etc complete all as directed including dismantling existing CGI sheet.

S&F Mild steel, plain, black sheet 1.00 mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with ri-veted or welded seams, including bending or turning up, mitred angles, etc. as required fixed in repair complete all as specified and directed

M&L for preparation of new or previously untreated steel surface of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F 100 mm size butt hinges medium weight stailess steel colled rolled complete all as specified and directed by Engineer-in-Charge. Make- Aluminium Udyog New Delhi(Brand- Global)/Mohan Matel Industries(Brand- Crown)/Urgent Industries New Delhi.

S&F 300mm mild steel sliding door bolts, stove enameled black with bright bolts not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolts plate and two on staple plate and fixed 300mm long complete all as specified. Make- Aluminium Udyog New Delhi(Brand- Global)/Mohan Matel Industries(Brand- Crown)/Urgent Industries New Delhi.

S&F Alumnium anodised barrel tower bolt 200 mm long extruded section complete all as specified. Make- Aluminium Udyog New Delhi(Brand- Global)/Mohan Matel Industries(Brand- Crown)/Urgent Industries New Delhi.

S&F Extruded aluminium alloy handle 150 mm long Make- Aluminium Udyog New Delhi(Brand- Global)/Mohan Matel Industries(Brand- Crown)/Urgent Industries New Delhi.

S&F in repair 15 mm dia Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed for iron pipe complete all as specified and directed. Make- Jaquar Essco (Orbit series)/ Cera(Victor series)/Kajaria Kerovit (JOY series)

S & F 15mm repairs bore long body bib tap with wall flange fixed in repair complete all as directed.Make- Jaquar Essco (Orbit series)/ Cera(Victor series)/Kajaria Kerovit (JOY series)

S & F in repairs 15 mm dia fancy Type CP angle valves cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron or for union. Make- Jaquar Essco (Orbit series)/ Cera(Victor series)/Kajaria Kerovit (JOY series)

Supply and fixed in repairs of PVC low level flushing cistern 10 Ltr capacity symphonic action type white as approved, ball valve float valve and handle incl bracket complete.

S & F PVC connection 15 mm size with PTMT nuts of length 600 mm complete all as specified.

Supply and fixed in repairs vitreous china wash hand basin, white size 630x450mm mm incl bracket, waste coupling 32 mm dia & bottel trap complete.

Supply and fix in repairs brass CP pillar taps 15mm bore with capstan head, screwed down high pressure with orwithout lettered hot or cold with long screwed shanks and fly nuts, screwed to iron pipe complete all as specified. Make:- Jaquar Essco (Orbit series)/ Cera(Victor series)/Kajaria Kerovit (JOY series)

M&L for green marble work 18 to 20mm thick (table rubbed and polished) in cooking platforms, flooring ,skirting & stepes and including 15mm thick screed bed / rendering in cement mortar 1:6 complete all as specified.

M&L for 30cmX30cmX 25mm thick heavy prepolished colored duty Chequered cement concrete tile of any pattern decided by GE as in floors/pavings laid over 20 mm thick screed bed in cement mortar 1:6 laid and jointed with white cement slurry mixed with pigment to match the shade of tile complete including dismantling of existing tiles with screed bed of any description and in any position complete all as specified and directed. Make:- Tulip infrastructure saharanpur, Mehtab tiles, NTC tiles Panchkula

S & F in repair brass chrominium plated tubular towel rail 20mm dia ,D type, 60cm long between flanges complete all as specified and directed. Make:- Cera/Jaguar Essco/Kajaria Cerovit

S & F in repair Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed. Make:- Cera/Jaguar Essco/Kajaria Cerovit

Supply and fixed in repair CP grating 100 mm dia complete all as specified and directed. Make:-Cera/Jaguar Essaco/Kajaria Cerovit

S&F in repairs powder coated SS drapery rods 25 to 32mm dia including necessary holding arrangements of powder coated SS brackets and finials complete all as directed.

S&F in repairs 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as directed.

S&F Low density polyethylene (LDPE) 32mm dia pipes of pressure rating 6 kgf/sq. cm complete all as specified.

S & F framed work as in doors or gates of square/rectangular tubing/mild steel angle iron, gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging; also fastening and fixing complete of Fe-290 ( GdeE-165) including one shop coat of zinc chromate primer paint complete all as specified and directed.

S&F Welded steel wire fabric weight not exc 4 Kg/Sqm complete to wood or steel members including dismantling existing fabric of any description complete all as specified and directed.

S&F in repairs Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed

M&L for PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in bed blocks etc for embedding hold fasts etc complete all as specified and directed.

S&F MS work as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles complete all as specified and directed.

M&L for Rubberised prepolished precast coloured concrete Interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade complete with & including 25mm thick sand cushioning layer including dismantling of existing damaged flooring etc complete, all as specified and directed. Make:- Tulip infrastructure saharanpur, Mehtab tiles, NTC tiles Panchkula

M&L for PCC 1:4:8 type D-2, (using 40 mm graded crushed stone aggregate) as in foundation and foundation of pole/stey filling, mass concrete and sub base of floor complete all as specified and directed.

S&F 12 to 12.5mm thick Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finishing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish including finishing with two coat of oil bound distemper over a coat of primer over a coat of plaster of paris putty complete all as specified & directed. Make:-Gypsum,Armstrong,PR Ceiling Product Ltd, Visaka Indusries Ltd

S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channe 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified & directed. Make:-Gypsum,Armstrong,PR Ceiling Product Ltd, Visaka Indusries Ltd

Replace/ tightening of J hook / L hook / self-taping screw and stop to leakage of existing roof sheet with leak stop and flush strip etc. complete all as directed.

M&L for 150x100mm Salt-glazed stoneware gully traps, square or round mouthed, tvpe 'S' complete all as directed.

S&F Reinforced contrete pipes 150mm bore, class NP2 laid on concreate bed or directed all hard ground and jointed complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) for concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested suitable for 150mm bore of pipe complete all as specified and directed.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc n.exc 10 Sqm on plan and n' exc. 1.5 m in depth and getting out in soft/loose soil complete all as directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers n. exc. 25cm complete all as specified and directed.

Removal of surplus soil to distance exceeding 250 metre but n. exc. 500 metre and depositing as directed at a level n. exc. 1.50m above the starting point complete all as specified and directed.

Cutting into exisiting manholes for connecting new drains, making good to pipes and rendering, cutting out existing benching and forming channels and reforming benching etc complete in PCC 1:2:4 type B1 smooth finish complete 150mm dia & up to 300 mm dia complete all as specified and directed.

M&L for Precast RCC 1:2:4 Type B-1( using 20 mm graded crushed stone aggregate} as in cover slab, set and jointed in cement mortar 1:4 incl demolition of existing old RCC slabs of any description complete all as specified and directed. (Note: Reinforcement shall be measured and paid separately under respective items of this BOQ)

S&F Mild steel TMT bars 6mm to 8mm dia bent to shape required including cranking bending and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Surface excavation n. Exc 30 Cm deep and averaging 15 cm deep and getting out in any type of soil complete all as specified.

M&L for broken stone hard core of gauge n. exc. 63mm, deposited, spread and levelled in layer n. exc 15 Cm thick watered & rammed to a true surface.

M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone agg) as in sub base complete finished fair & even all as specified & directed.

M&L for Cement concrete work in pavement/hard-standing of flexural strength 40 kg/per square centimeter in field using minimum 400 kg of cement per cubic meter, thickness of concrete 25 cm finishing concrete surface with brooms complete all as specified & directed.(Note: - No adjustment for cement in excess of minimum cement content obtained in design shall be made.)

Forming construction joint 30 mm deep x10 mm wide filled with sealing compound Grade 'A ' etc complete all as directed.

M&L for PCC 1: 3 : 6 type C-1 ( using 20 mm graded crushed stone aggregates) in surface channels and drains including necessary use & waste of formwork and demolition of existing old cement concrete of any description complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi tred/stopped ends etc complete all as specified and directed.

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Use and waste of form work to edges of concrete flat slab and shelves, not exceeding 20cm Thick for fair finish surface complete all as specified and directed.

Use and waste of form work to soffits of suspended slab such as roof slab, floor slab, landing and similar work not exceeding 200mm thick for fair finish surface complete all as specified and directed

M&L for RCC M-25 (using 20mm graded crushed stone aggregate) as in slab supported on walls beams and columns in floor, roof, landing and in shelves and the like complete all as specified and directed.

S & F Wire netting of galvanised steel wire 1.40mm dia and mesh size 12mm fixed with tinned tacks of wire staples complete all as specified

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surface of walls, floors, etc.

Taking down carefully submain wiring including all accessories without disturbing existing wiring fittings fixtures etc and making good to the disturbed surfaces all as directed and as specified in any type and size all as directed.

Material and labour for point wiring with PVC insulated and unsheathed electric able 1100 volts grade single core FRLSH having multi stranded copper conductor of 1.5 sq mm nominal cross sectional area drawn in and including concealed non metallic rigid PVC conduit not less than 20 mm dia with all fitting and fixing accessories and 1.5 sq mm PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor, connected to earth dolly by providing suitable lugs with & including pressed steel sunken terminal boxes 1.6 mm thick, 60 mm deep of required size factory made for mounting switch, regulators etc with and including 3 mm thick plastic hylam laminated sheet cover (white) ISI marked, fixed with brass screws and cup washers duly painted with two coats of anti corrosive paint/black bituminous paint outside and two coats of aluminium paint inside for mounting switches, sockets etc complete for the following. Make of wire: Finolex, Plaza, Havells, Polycab, Gloster, Universal, Grandlay. Make of conduit: Finolex, Ess Ess Kay, ICL Note: (i) The quoted rates shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface. The portion of point wiring at ceiling shall be in surface conduit of suitable size fixed on ceiling surface with using PVC rawl plugs. (ii) Point wiring & earth wire shall be connected to each & every sunken box. (iii) All screws, fasteners, bolts, nuts & washer shall be cadmium plated & the cost of which is deemed to be included in the quoted unit rates.

One light point controlled by one, one way switch 5 Amps

One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator

One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad.

One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.

One bell point controlled by one, bell switch 5 Amps

All as per item No. 116 above but with stranded copper conductor 2.5 Sq mm (nominal area), two single core, PVC insulated cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amp socket outlet, independent, including PVC insulated stranded copper conductor 2.5 Sqmm (nominal area) single core as earth continuity conductor to common earth and connecting to earth dolly.

All as per item No.116 to here-in-before but with 4 Sq mm stranded copper conductor for one power point on independent board and including 4 sqmm earth continuity wire for AC / equipments etc controlled by one SP/SPN MCB.(MCB will be measured and paid saparately). Note: The point wiring wiil be done from DBs to the Switch sockets of any size with three wires running independently for each point and with no tappings.

Point wiring with PVC insulated and unsheathed electric cable 1100 volts grade single core FRLSH having multi stranded copper conductor of 1.5 Sqmm nominal cross sectional area drawn in existing conduit concealed/ surface/casing & caping and 1.5 Sqmm PVC insulated unsheathed multistranded copper conductor cable FRLS as continuous earth conductor, connected to earth dolly by providing suitable lugs with & including pressed steel sunken terminal boxes 1.6mm thick, 60mm deep of required size factory made for mounting switch, regulators etc with and including 3mm thick plastic hylam laminated sheet cover (white) ISI marked, fixed with brass screws and cup washers duly painted with two coats of anti corrosive paint/black bituminous paint outside and two coats of aluminium paint inside for mounting switches, sockets etc complete for the following:- Make of wire : Finolex, Plaza, Havells, Polycab, Gloster, Universal, Grandlay, Note:- (i) Point wiring & earth wire shall be connected to each & every sunken box. (ii) All screws, fasteners, bolts, nuts & washer shall be cadmium plated & the cost of which is deemed to be included in the quoted unit rates.

One light point controlled by one, one way 6 Amp switchs.

One fan/exhaust fan point controlled by one, one way 6 Amp switch.

One fan/exhaust fan point controlled by one, one way 6 Amp switch.

One 5 pin 5/6 Amps socket outlet point on independent board controlled by one, one way switch.

M&L all as per item No119 here in before but point wiring with 2.5 sqmm multistrand copper conductor cable for one six pin socket outlet 15 Amps controlled by one switch on independent board and 2.5 sqmm PVC insulated multi strand copper conductor cable as continous earth wire.

Supply and fix Switch piano, flush type, single pole one way, 5 Amp complete all specified and as directed Make:- Anchor/Legrand/Havells/C&S.

Supply and fix Switch piano, flush type, single pole, one way, 15 Amp complete all specified and as directed Make:- Anchor/Legrand/Havells/C&S.

Supply and fix Socket outlet, multipurpose, 2 in 1, 5 pin, 5 Amp complete all specified and as directed Make:- Anchor/Legrand/Havells/C&S.

Supply and fix Socket outlet, multipurpose, 2 in 1, 5 pin, 5 &15 Amp complete all specified and as directed Make:- Anchor/Legrand/Havells/C&S.

Supply and fix Bell Push flush type 5 Amps all as specified and directed.

Suply and fix for Bell Electric Ding dong type suitable for operation on 230 volt 50 HZ A C supply complete all as specified and as directed

Supply and fix Lamp angular holder, PVC/Polycarbonate type with back plate suitable for angular holder fittings complete all specified and as directed Make:- Anchor/Legrand/Havells/C&S.

Supply and fix Ceiling rose, 63.5 mm dia, ISI marked, three terminal of polycarbonate /isolated body complete all specified and as directed. Make:- Anchor/Legrand/Havells/C&S.

Supply and fix Electronic step rotary type fan regulator 100W, 230 volts AC 50Hz complete all as specified and directed Make:- Anchor/Legrand/Havells/C&S.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230V, 1200MM sweep. Min are delivery 210CFM with service value 6.00 BEE five star rated with brushless direct current motor (BLDC)

Supply and fix surface and wall mounted LED batten fitting 20 watt 230 volts with effacy 125 lumen/watt, high quality materials and design, extruded aluminium housing enhnce safety, high quality PC diffuser and same with using PVC sheathed and insulated 3 core flexible 23/0.0076 copper conductor cable including all accessories and fixing arrangement for fixing the light fitting to wall including taking down existing fitting complete all as directed. make crompton/havells/philips

Supply and fix building security light fitting 1x30 W new generation energy saving and environmental friendly long life led street light made up of pressure die cast aluminium housing with mid power led as lighting source and PC cover having top opening seperate driver compartment with IP 66 protection and impact resistance of IK 07 including suitable size of bracket bend in shape with 2 Nos of clamps,nuts,bolts etc including taking down existing fitting etc all as specified and directed.Make:- Crompton(LSTS-30-CDL-M)/Wipro/ havells

M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated cable with stranded copper conductor of size 4 Sq. mm nominal area and drawing into concealed PVC non metallic rigid heavy duty PVC conduit and its accessaries ISI marked heavt duty of suitable size including with one runs of PVC insulated 4.0 Sqmm (nominal area) stranded copper conductor as earth wire complete all as specified and as directed.Note:- two runs of 4 sqmm cable,one run of 4 sqmm cable and one run of PVC conduit will be measured as one unit

Supply and fix steel body, heavy duty exhaust fan, AC single phase, 240 V of size 450 mm sweep with louvers including necessary connection and replacement of flexible copper cable from ceiling roseand including making hole of suitable size and making hall for distrubed surface and complete all as specified and as directed. Make : Havells/Bajaj/Usha/Crompton.

S & F in repair plastic body exhaust fan, AC single phase, 240 V of size 250 mm sweep with louvers including necessary connection and replacement of flexible copper cable from ceiling rose and making hole of suitable size and making good to the disturbed surface and as directed. Make : Bajaj/Usha/Crompton/havells.

Dismentling old U/S main switches, Sheatmetal enclosures DB including MCCBs, MCBs etc and keeping in safe custody either for reuse or for disposal including making good to the disturbed surface of wall all as directed.

Supply and fixing in repairs metal plug and socket with MCB SP 20 amp 240 V enclosure for AC/equipment with neutral and earth point all as specified and directed.

Supply and fix sheet metal enclosure powder coated three phase and Neutral DB with MCCB incomer of capacity 125 amp, 4 pole, double door, 50 Hz including outging (6+6+6) modules with bus bar including grouting on the wall by means of screws and rawal plugs and making good disturbed surfaces including taking down old unserviceable complete all as specified and directed.(Make : L&T model No DBVTH006SD , MCCB 125 Amp Make L&T model No CM90634OOMO, MCB 16-32 Amp Make L&T, Model No BB10160B)

Supply and fix sheet metal enclosure powder coated single phase DB for fixing of MCBs, 12 ways double door with bus bar including grouting on the wall by means of screws and rawal plugs and making good disturbed surfaces complete all as specified and directed.

Supply and fix sheet metal enclosure powder coated single phase DB for fixing of MCBs, 8 ways double door with bus bar including grouting on the wall by means of screws and rawal plugs and making good disturbed surfaces complete all as specified and directed.

Supply and fix sheet metal enclosure powder coated single phase DB for fixing of MCBs, 4 ways double door with bus bar including grouting on the wall by means of screws and rawal plugs and making good disturbed surfaces complete all as specified and directed.

Supply and fix MCB SP 240 volts, 50 Hz capacity 6-40 Amps all as specified and directed

Supply and fix MCB Isolator SPN 240 volts, 50 Hz of capacity 40 Amps all as specified and directed(Incommer for 4 way and 12 way SPN DBs)

Supply and fix Water heater storage type, electric,capacity 50 litres.BEE 5 star rated complete all as directed. (make Havells/ Crompton/Bajaj

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50sq mm 3.5 core, complete all as directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10sq mm 4 core, complete all as directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 6sq mm 2 core, complete all as directed.

Material and labour for un reinforced pre cast conrete cable cover l1 type=1, flat size 250mmX150mmX40mm as protection to underground cable laid by and flat adjoining each other complete all as directed.

Materials and labour for sand filling around the cable with approved quality coarse sand for sand cushioning of under ground cable including spreading and punning down to desired thickness complete all as specified and as directed.

Supply and Laying 40 mm, `light grade', galvanised Iron tube, with all fitting; laid in trenches for road crossing of cable, complete all as directed.

Material and labour for earthing with galvanised steel earth plate electrode 60cmX60cmX 6mm thick burried directly in ground (earth pit not less than2.25 mtr below ground level) with top edge of the plate not less than 1.5 mtr below ground level connected to 4mm thick GI wire by means of nuts,bolts,check nuts & washers of galvanized iron or steel,protected by 15mm bore light grade galvanised iron pipe and connected to main switch board,including all necessary excavation & earth work in hard dense soill including funnel with wire mesh and watering pipe 20 mm bore medium grade galvanised iron pipe with charcoal and common salt in alternate layers of 15 cm thickness all around the GI plate electrode with concrete pit in PCC 1:3:6 type C-1 with cast iron frame including cast iron cover10mm thick hinged to CI frame and 6mm MS rod for handle and necessary testing complete all as shown in electrical plate No 3 of SSR part-I all as specified and directed.(Two earthing for each main DB) (note 12 for bldg db, 04 for bathroom db, 02 for bus bar chamber, complete all as directed.

supply and fix steel tubular swaged poles type 410 SP-31, 9 mtr long complete with cast iron base plate, finial taper plug, bolts, nuts & screw and suitble size of angle for fixing of flood light, complete all as directed.

Supply and fix LED flood light fitting 120 watt energy saving and enviromental friendly long life exclusive innovative made up of pressure die cast aluminium housing IP66 with high power LED as lightnig source, suitable for highlighting archtectural facade and general purpose lighting including taking down existing fitting of any type and in any position complete all as directed. Make:Crompton/Philips/ Wipro/Havells.

Sharda Enterprises

M/S RAJESH KUMAR GOYAL

Meher enterprises