Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹2.0 CrAccepted-AOC COURT ROAD UTTARKASHI | ₹2.0 Cr Quoted ₹10.2 Cr | 1 | Accepted-AOC L-1 |
| 2 | 2₹11.0 CrRejected-AOC 2 FRIENDS ENCLAVE SHAH NAGAR P O DEFENCE COLONY DEHRADUN WORKS AT RESHAM MAJRI GURUDWARA ROAD LAL TAPPAR IND AREA RISHIKESH DEHRADUN | DEHRADUN | UTTARAKHAND | 248001 | ₹11.0 Cr | 2 | Rejected-AOC L-2 |
| 3 | Rejected-Technical | - | - | Rejected-Technical DOES NOT QUALIFIES PQR |
Tender Value
₹6.0 Cr
EMD Value
₹12.6 L
Closing Date
12 Aug 2024, 5:00 pmClosed
SE CCP-1 UPCL
SE CCP-1 VCV GABBAR SINGH URJA BHAWAN DEHRADUN
Supply Installation Testing and Commissioning of Infrastructure Works _Loss Reduction on turnkey basis under Revamped Reforms-Linked Results-Based Distribution Sector Scheme District- Uttarkashi, Location Uttarkashi-2
2024_UPCLC_71071_4
CCP-1/62/2023-2024
Open Tender
Electrical Works
990 days
AS PER TENDER
AS PER TENDER
6 documents required · 6 mandatory
₹29,500
EE (HQ) UPCL
₹12.6 L
SE CCP-1 VCV GABBAR SINGH
24 Apr 2026
24 Apr 2024
13 Aug 2024
24 Apr 2024
12 Aug 2024
20 Jun 2024
6 May 2024 - 11 May 2024
14 May 2024
Amount
New DTR 25 KVA with Double Pole Mounting Type Stucture
11/0.433 kV 25 kVA Distribution Transformer
Steel Tubular Poles 8.5 m long (STP 8.5 M, 410 MPa , SP-23) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)
MS Channel 100x50x6mm, 2.800mtr. long (Top Channel) with all fixing arrangment Nuts & Bolts all galvanized as per SBD specs
PP of suitable size for Top portion of STP-410, SP-23 Pole
MS Channel 100x50x6mm, 1.300 mtr. long (Tee off) with clamps ,Bolt and nuts all galvanized as per SBD specs
Earth-wire clamp made of MS Flat 50x8mm for STP SP-23 with Nut & Bolts Warshers all galvanised
MS Channel 100x50x6mm, 2.800 mtr. Long (for Transformer Base) with all fixing arrangment Nuts & Bolts all galvanized as per SBD specs
PP of suitable size for Bottom portion of STP-410, SP-23 Pole
11 kV, 3-ph, 400 A, 3 Pin type, Horizontal/Vertical Mounting type, Gang Operated, AB Switch
MS Channel 100x50x6mm 2 no. 2.8 mtr. Long, Clamp,Nuts&Bolts all galvanized as per SBD specs for AB switch SP-23
Transformer Belting Angle 50X50X6mm with all fixing arrangment,Nuts & Bolts
11 kV, 3-ph, Drop Out fuse units (set of 3 units) along with Support Insulators,fuse barrel etc.
MS Channel 100x50x6mm 2.8 mtr. Long, Clamp,Nuts&Bolts all galvanized as per SBD specs for DO fuse set.Sp-23
PP of suitable size for Middle portion of STP-410, SP-23 Pole
11 kV Polymer Pin Insulator complete
GI Fish Plate 50x8mm for 11 kv DP
11 kV Compsite Polymer Disc Insulator B & S type
Disc fitting for Weasel/Rabbit conductor 45 KN B&S type
LT panel with protection equipment along with MCCB, Earth Fault Relay (EFR) etc. including fixing arrangement for 25 kVA T/F.
AMR Compatible Static TVEM for Station/ Distribution Transformer with metering Cubical, CTs etc (Three Phase, Four Wire, 0.5 Class, Energy Meter for 3-Phase 25 kVA Distribution Transformer) With modem for communication
LTDB & DTR metering channel 100x50x6mm 2.8 mtr. Long with clamp, nuts & bolt all galvanized as per SBD specs Sp-23
ACSR Rabbit conductor
Anti-Climbing Device (2.5mm dia (12SWG) galvanized barbed wire 3.5 kg per pole)
Clamp made of 50x8 mm strip with Nuts, Bolts & Warshers all galvanized for Anti climbing device.(SP-23)
11 kV Danger Board with Clamp with N&B
Lightening Arrestors Polymer (9kV, 5kA)
Compound filled earthing/Chemical Earthing(with G.I. Strip 35x6mm for Neutral Earthing of Transformer
Compound filled earthing/Chemical Earthing
G.I. Strip 35x6mm
Compound filled earthing/Chemical Earthing of Transformer Body(with G.I. Strip 35x6mm),Other structure& Equipment( with GI Wire of 8 SWG)
Compound filled earthing/Chemical Earthing
GI wire 8 SWG
G.I. Strip 35x6mm
Compound filled earthing/Chemical Earthingof Lightning Arrestor with G.I. Strip 35x6mm
Compound filled earthing/Chemical Earthing
G.I. Strip 35x6mm
1x35 mm2 XLPE/PVC insulated Al. cable for energising the distribution boxes/ kiosks.
Stay complete
11 kV Galvanized Stay Set Complete 16ϕX1800 mm. with 2 no. turn-buckle, anchor plate (200x200x6mm) as per scope of work in SBD
GI Stay Wire 7/10 SWG
11 kV Stay Insulator as per SBD
Stay Clamp (50x8mm) with Nuts, Bolts & warshers all galvanized
Grouting and Muffing with Cement Concreating ratio of 1:3:6
Rod type earthing of pole by MS earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete all galvenized
Rod type earthing of pole by MS earthing rod with welded Clamp 40X3mm, Bolts, Washers & Nuts complete all galvenized.
GI wire 8 SWG
Alluminium paint (Double Coat)
Red Oxide paints
Grouting and Muffing with Cement Concreating ratio of 1:3:6
New 11 KV Line with ACSR Conductor
11 KV New line with Rabbit conductor for SP-23
No. of Single pole
Steel Tubular Poles 8.5 m long (STP 8.5 M, 410 MPa , SP-23) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)
11 kV,V Type cross arm made of MS Channel 100X50X6mm complete with Clamps, Clamps, Nuts, Bolts & warshers all galvanized
F-Bracket made of MS Channel (100X50X6) mm with Clamps, Nuts, Bolts & Washers all galvanized
11 kV Polymer Pin Insulator complete
11 kV Danger Board with Clamp with N&B
Earth-wire clamp made of MS Flat 50x8mm for STP SP-23 with Nut & Bolts Warshers all galvanised
Anti-Climbing Device (2.5mm dia (12SWG) galvanized barbed wire 3.5 kg per pole)
Clamp made of 50x8 mm strip with Nuts, Bolts & Warshers all galvanized for Anti climbing device.(SP-23)
Aluminum Binding wire & tape
Rod type earthing of pole by MS earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete all galvenized
Rod type earthing of pole by MS earthing rod with welded Clamp 40X3mm, Bolts, Washers & Nuts complete all galvenized.
GI wire 8 SWG
Alluminium paint (Double Coat)
Red Oxide paints
Grouting and Muffing with Cement Concreating ratio of 1:3:6
No. of Single Section pole
Steel Tubular Poles 8.5 m long (STP 8.5 M, 410 MPa , SP-23) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)
11 kV top channel 100x50x6mm 1.13 mtr. Long with clamp, nuts & bolt all galvanized as per SBD specs
PP of suitable size for Top portion of STP-410, SP-23 Pole
F-Bracket made of MS Channel (100X50X6) mm with Clamps, Nuts, Bolts & Washers all galvanized
11 kV Polymer Pin Insulator complete
11 kV Compsite Polymer Disc Insulator B & S type
Disc fitting for Weasel/Rabbit conductor 45 KN B&S type
P.G. clamps/Wedge type for Rabbit/Weasel conductor
11 kV Danger Board with Clamp with N&B
Earth-wire clamp made of MS Flat 50x8mm for STP SP-23 with Nut & Bolts Warshers all galvanised
Anti-Climbing Device (2.5mm dia (12SWG) galvanized barbed wire 3.5 kg per pole)
Clamp made of 50x8 mm strip with Nuts, Bolts & Warshers all galvanized for Anti climbing device.(SP-23)
Aluminum Binding wire & tape
Rod type earthing of pole by MS earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete all galvenized
Rod type earthing of pole by MS earthing rod with welded Clamp 40X3mm, Bolts, Washers & Nuts complete all galvenized.
GI wire 8 SWG
Alluminium paint (Double Coat)
Red Oxide paints
Grouting and Muffing with Cement Concreating ratio of 1:3:6
No. of double pole structure
Steel Tubular Poles 8.5 m long (STP 8.5 M, 410 MPa , SP-23) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)
11 kV top channel 100x50x6mm 2.2 mtr. Long with nuts & bolt all galvanized as per SBD specs( DP)
PP of suitable size for Top portion of STP-410, SP-23 Pole
11 KV Cross bracing Set 50x50x6mm with Belting angle of 50x50x6mm with clamps bolts & nuts all galvanized, as per SBD(for SP-23 pole)
11 kV Polymer Pin Insulator complete
GI Fish Plate 50x8mm for 11 kv DP
11 kV Compsite Polymer Disc Insulator B & S type
Disc fitting for Weasel/Rabbit conductor 45 KN B&S type
11 kV Danger Board with Clamp with N&B
P.G. clamps/Wedge type for Rabbit/Weasel conductor
Aluminum Binding wire & tape
Earth-wire clamp made of MS Flat 50x8mm for STP SP-23 with Nut & Bolts Warshers all galvanised
Anti-Climbing Device (2.5mm dia (12SWG) galvanized barbed wire 3.5 kg per pole)
Clamp made of 50x8 mm strip with Nuts, Bolts & Warshers all galvanized for Anti climbing device.(SP-23)
Rod type earthing of pole by MS earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete
Rod type earthing of pole by MS earthing rod with welded Clamp 40X3mm, Bolts, Washers & Nuts complete all galvenized.
GI wire 8 SWG
Alluminium paint (Double Coat)
Red Oxide paints
Grouting and Muffing with Cement Concreating ratio of 1:3:6
No. of four pole structure
Steel Tubular Poles 8.5 m long (STP 8.5 M, 410 MPa , SP-23) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)
11 kV top channel 100x50x6mm 2.2 mtr. Long with nuts & bolt all galvanized as per SBD specs
PP of suitable size for Top portion of STP-410, SP-23 Pole
11 KV Cross bracing Set 50x50x6mm with Belting angle of 50x50x6mm with clamps bolts & nuts all galvanized, as per SBD(for SP-23 pole)
11 kV Polymer Pin Insulator complete
11 kV E Clamp made of MS Flat 50x8mm with Bolts & Nuts all galvenized
Disc fitting for Weasel/Rabbit conductor 45 KN B&S type
11 kV Compsite Polymer Disc Insulator B & S type
Earth-wire clamp made of MS Flat 50x8mm for STP SP-23 with Nut & Bolts Warshers all galvanised
11 kV Danger Board with Clamp with N&B
P.G. clamps/Wedge type for Rabbit/Weasel conductor
Aluminum Binding wire & tape
Anti-Climbing Device (2.5mm dia (12SWG) galvanized barbed wire 3.5 kg per pole)
Clamp made of 50x8 mm strip with Nuts, Bolts & Warshers all galvanized for Anti climbing device.(SP-23)
Rod type earthing of pole by MS earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete all galvenized.
Rod type earthing of pole by MS earthing rod with welded Clamp 40X3mm, Bolts, Washers & Nuts complete all galvenized.
GI wire 8 SWG
Alluminium paint (Double Coat)
Red Oxide paints
Grouting and Muffing with Cement Concreating ratio of 1:3:6
ACSR Rabbit Conductor for Phase with 3% sag.
ACSR Rabbit conductor
Earth Wire 7/16 SWG
Jointing Sleeve for Rabbit Conductor
Guarding of 11 KV line
Guarding channel 100x50x6 mm,2210 mm long with holding clamp, nut & bolts etc. all galvanized as per SBD (DP)
Guarding channel 100x50x6 mm,1130 m long with holding clamp, nut & bolts etc. all galvanized as per SBD (SP)
PP of suitable size for Top portion of STP-410, SP-23 Pole
6 SWG GI wire
GI wire 8 SWG
GI Eye Bolt 16mm dia, 236mm long for guarding
G.I. Wire No. 16 SWG for binding
Stay complete
11 kV Galvanized Stay Set Complete 16ϕX1800 mm. with 2 no. turn-buckle, anchor plate (200x200x6mm) as per scope of work in SBD
GI Stay Wire 7/10 SWG
11 kV Stay Insulator as per SBD
Stay Clamp (50x8mm) with Nuts, Bolts & warshers all galvanized
Grouting and Muffing with Cement Concreating ratio of 1:3:6
New LT Line: Proposed Cabling Works for New DTR New LT Line with AB Cable
New LT line with Insulated ABC of 3x25+1x25 Sq.mm.
Steel Tubular Poles 8.5 m long (STP 8.5 M, 410 MPa , SP-21) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)
Suspension clamp assembly suitable for AB Cable with all fittings and S.S.strap
Dead end clamp assembly suitable for AB Cable with all fittings and S.S.strap
L.T. Insulation Piercing Connectors for energizing distribution kiosk/box & Jumpering
Mid span jointing sleeves (25 Sq.mm.)
PG Connector/Wedge type 25 Sqmm.
Supply & Fixing of LT distribution boxes/kiosk on the LT poles including all clamps & material required for mounting, connections & sealing.
Insulated ABC of 3x25+1x25 Sq.mm.
1x16 mm2 XLPE/PVC insulated Al. cable for energising the distribution boxes/ kiosks/Street light
LT Stay complete
11 kV Galvanized Stay Set Complete 16ϕX1800 mm. with 2 no. turn-buckle, anchor plate (200x200x6mm) as per scope of work in SBD
GI Stay Wire 7/10 SWG
LT Stay Insulator
Stay Clamp (50x8mm) with Nuts, Bolts & warshers all galvanized
Grouting and Muffing with Cement Concreating ratio of 1:3:6
Rod type earthing of pole by MS earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete all galvenized
Rod type earthing of pole by MS earthing rod with welded Clamp 40X3mm, Bolts, Washers & Nuts complete all galvenized.
GI wire 8 SWG
Alluminium paint (Double Coat)
Red Oxide paints
Grouting and Muffing with Cement Concreating ratio of 1:3:6
LT Connection
LT Connection (Electronic KWH Meter 1PX2W 10-60 Amp with Box with LT PVC cable 2x4 sqmm)
New Service Connection
1-Ph 2 wire, 10-60Amp, 1.0 Accuracy class static electronic meter With polycarbonate box and comunication facility
SMC board 300x300x40mm with anchor bolt (4 nos for each SMC board)
PVC Insulated un-armour Cable 2CX4 Sqmm.
G.I. Wire No. 10 SWG for support of consumer cable
Description of Work / Item(s)
Amount
New DTR 25 KVA with Double Pole Mounting Type Stucture
11/0.433 kV 25 kVA Distribution Transformer
Steel Tubular Poles 8.5 m long (STP 8.5 M, 410 MPa , SP-23) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)
MS Channel 100x50x6mm, 2.800mtr. long (Top Channel) with all fixing arrangment Nuts & Bolts all galvanized as per SBD specs
PP of suitable size for Top portion of STP-410, SP-23 Pole
MS Channel 100x50x6mm, 1.300 mtr. long (Tee off) with clamps ,Bolt and nuts all galvanized as per SBD specs
Earth-wire clamp made of MS Flat 50x8mm for STP SP-23 with Nut & Bolts Warshers all galvanised
MS Channel 100x50x6mm, 2.800 mtr. Long (for Transformer Base) with all fixing arrangment Nuts & Bolts all galvanized as per SBD specs
PP of suitable size for Bottom portion of STP-410, SP-23 Pole
11 kV, 3-ph, 400 A, 3 Pin type, Horizontal/Vertical Mounting type, Gang Operated, AB Switch
MS Channel 100x50x6mm 2 no. 2.8 mtr. Long, Clamp,Nuts&Bolts all galvanized as per SBD specs for AB switch SP-23
Transformer Belting Angle 50X50X6mm with all fixing arrangment,Nuts & Bolts
11 kV, 3-ph, Drop Out fuse units (set of 3 units) along with Support Insulators,fuse barrel etc.
MS Channel 100x50x6mm 2.8 mtr. Long, Clamp,Nuts&Bolts all galvanized as per SBD specs for DO fuse set.Sp-23
PP of suitable size for Middle portion of STP-410, SP-23 Pole
11 kV Polymer Pin Insulator complete
GI Fish Plate 50x8mm for 11 kv DP
11 kV Compsite Polymer Disc Insulator B & S type
Disc fitting for Weasel/Rabbit conductor 45 KN B&S type
LT panel with protection equipment along with MCCB, Earth Fault Relay (EFR) etc. including fixing arrangement for 25 kVA T/F.
AMR Compatible Static TVEM for Station/ Distribution Transformer with metering Cubical, CTs etc (Three Phase, Four Wire, 0.5 Class, Energy Meter for 3-Phase 25 kVA Distribution Transformer) With modem for communication
LTDB & DTR metering channel 100x50x6mm 2.8 mtr. Long with clamp, nuts & bolt all galvanized as per SBD specs Sp-23
ACSR Rabbit conductor
Anti-Climbing Device (2.5mm dia (12SWG) galvanized barbed wire 3.5 kg per pole)
Clamp made of 50x8 mm strip with Nuts, Bolts & Warshers all galvanized for Anti climbing device.(SP-23)
11 kV Danger Board with Clamp with N&B
Lightening Arrestors Polymer (9kV, 5kA)
Compound filled earthing/Chemical Earthing(with G.I. Strip 35x6mm for Neutral Earthing of Transformer
Compound filled earthing/Chemical Earthing
G.I. Strip 35x6mm
Compound filled earthing/Chemical Earthing of Transformer Body(with G.I. Strip 35x6mm),Other structure& Equipment( with GI Wire of 8 SWG)
Compound filled earthing/Chemical Earthing
GI wire 8 SWG
G.I. Strip 35x6mm
Compound filled earthing/Chemical Earthingof Lightning Arrestor with G.I. Strip 35x6mm
Compound filled earthing/Chemical Earthing
G.I. Strip 35x6mm
1x35 mm2 XLPE/PVC insulated Al. cable for energising the distribution boxes/ kiosks.
Stay complete
11 kV Galvanized Stay Set Complete 16ϕX1800 mm. with 2 no. turn-buckle, anchor plate (200x200x6mm) as per scope of work in SBD
GI Stay Wire 7/10 SWG
11 kV Stay Insulator as per SBD
Stay Clamp (50x8mm) with Nuts, Bolts & warshers all galvanized
Grouting and Muffing with Cement Concreating ratio of 1:3:6
Rod type earthing of pole by MS earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete all galvenized
Rod type earthing of pole by MS earthing rod with welded Clamp 40X3mm, Bolts, Washers & Nuts complete all galvenized.
GI wire 8 SWG
Alluminium paint (Double Coat)
Red Oxide paints
Grouting and Muffing with Cement Concreating ratio of 1:3:6
New 11 KV Line with ACSR Conductor
11 KV New line with Rabbit conductor for SP-23
No. of Single pole
Steel Tubular Poles 8.5 m long (STP 8.5 M, 410 MPa , SP-23) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)
11 kV,V Type cross arm made of MS Channel 100X50X6mm complete with Clamps, Clamps, Nuts, Bolts & warshers all galvanized
F-Bracket made of MS Channel (100X50X6) mm with Clamps, Nuts, Bolts & Washers all galvanized
11 kV Polymer Pin Insulator complete
11 kV Danger Board with Clamp with N&B
Earth-wire clamp made of MS Flat 50x8mm for STP SP-23 with Nut & Bolts Warshers all galvanised
Anti-Climbing Device (2.5mm dia (12SWG) galvanized barbed wire 3.5 kg per pole)
Clamp made of 50x8 mm strip with Nuts, Bolts & Warshers all galvanized for Anti climbing device.(SP-23)
Aluminum Binding wire & tape
Rod type earthing of pole by MS earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete all galvenized
Rod type earthing of pole by MS earthing rod with welded Clamp 40X3mm, Bolts, Washers & Nuts complete all galvenized.
GI wire 8 SWG
Alluminium paint (Double Coat)
Red Oxide paints
Grouting and Muffing with Cement Concreating ratio of 1:3:6
No. of Single Section pole
Steel Tubular Poles 8.5 m long (STP 8.5 M, 410 MPa , SP-23) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)
11 kV top channel 100x50x6mm 1.13 mtr. Long with clamp, nuts & bolt all galvanized as per SBD specs
PP of suitable size for Top portion of STP-410, SP-23 Pole
F-Bracket made of MS Channel (100X50X6) mm with Clamps, Nuts, Bolts & Washers all galvanized
11 kV Polymer Pin Insulator complete
11 kV Compsite Polymer Disc Insulator B & S type
Disc fitting for Weasel/Rabbit conductor 45 KN B&S type
P.G. clamps/Wedge type for Rabbit/Weasel conductor
11 kV Danger Board with Clamp with N&B
Earth-wire clamp made of MS Flat 50x8mm for STP SP-23 with Nut & Bolts Warshers all galvanised
Anti-Climbing Device (2.5mm dia (12SWG) galvanized barbed wire 3.5 kg per pole)
Clamp made of 50x8 mm strip with Nuts, Bolts & Warshers all galvanized for Anti climbing device.(SP-23)
Aluminum Binding wire & tape
Rod type earthing of pole by MS earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete all galvenized
Rod type earthing of pole by MS earthing rod with welded Clamp 40X3mm, Bolts, Washers & Nuts complete all galvenized.
GI wire 8 SWG
Alluminium paint (Double Coat)
Red Oxide paints
Grouting and Muffing with Cement Concreating ratio of 1:3:6
No. of double pole structure
Steel Tubular Poles 8.5 m long (STP 8.5 M, 410 MPa , SP-23) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)
11 kV top channel 100x50x6mm 2.2 mtr. Long with nuts & bolt all galvanized as per SBD specs( DP)
PP of suitable size for Top portion of STP-410, SP-23 Pole
11 KV Cross bracing Set 50x50x6mm with Belting angle of 50x50x6mm with clamps bolts & nuts all galvanized, as per SBD(for SP-23 pole)
11 kV Polymer Pin Insulator complete
GI Fish Plate 50x8mm for 11 kv DP
11 kV Compsite Polymer Disc Insulator B & S type
Disc fitting for Weasel/Rabbit conductor 45 KN B&S type
11 kV Danger Board with Clamp with N&B
P.G. clamps/Wedge type for Rabbit/Weasel conductor
Aluminum Binding wire & tape
Earth-wire clamp made of MS Flat 50x8mm for STP SP-23 with Nut & Bolts Warshers all galvanised
Anti-Climbing Device (2.5mm dia (12SWG) galvanized barbed wire 3.5 kg per pole)
Clamp made of 50x8 mm strip with Nuts, Bolts & Warshers all galvanized for Anti climbing device.(SP-23)
Rod type earthing of pole by MS earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete
Rod type earthing of pole by MS earthing rod with welded Clamp 40X3mm, Bolts, Washers & Nuts complete all galvenized.
GI wire 8 SWG
Alluminium paint (Double Coat)
Red Oxide paints
Grouting and Muffing with Cement Concreating ratio of 1:3:6
No. of four pole structure
Steel Tubular Poles 8.5 m long (STP 8.5 M, 410 MPa , SP-23) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)
11 kV top channel 100x50x6mm 2.2 mtr. Long with nuts & bolt all galvanized as per SBD specs
PP of suitable size for Top portion of STP-410, SP-23 Pole
11 KV Cross bracing Set 50x50x6mm with Belting angle of 50x50x6mm with clamps bolts & nuts all galvanized, as per SBD(for SP-23 pole)
11 kV Polymer Pin Insulator complete
11 kV E Clamp made of MS Flat 50x8mm with Bolts & Nuts all galvenized
Disc fitting for Weasel/Rabbit conductor 45 KN B&S type
11 kV Compsite Polymer Disc Insulator B & S type
Earth-wire clamp made of MS Flat 50x8mm for STP SP-23 with Nut & Bolts Warshers all galvanised
11 kV Danger Board with Clamp with N&B
P.G. clamps/Wedge type for Rabbit/Weasel conductor
Aluminum Binding wire & tape
Anti-Climbing Device (2.5mm dia (12SWG) galvanized barbed wire 3.5 kg per pole)
Clamp made of 50x8 mm strip with Nuts, Bolts & Warshers all galvanized for Anti climbing device.(SP-23)
Rod type earthing of pole by MS earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete all galvenized.
Rod type earthing of pole by MS earthing rod with welded Clamp 40X3mm, Bolts, Washers & Nuts complete all galvenized.
GI wire 8 SWG
Alluminium paint (Double Coat)
Red Oxide paints
Grouting and Muffing with Cement Concreating ratio of 1:3:6
ACSR Rabbit Conductor for Phase with 3% sag.
ACSR Rabbit conductor
Earth Wire 7/16 SWG
Jointing Sleeve for Rabbit Conductor
Guarding of 11 KV line
Guarding channel 100x50x6 mm,2210 mm long with holding clamp, nut & bolts etc. all galvanized as per SBD (DP)
Guarding channel 100x50x6 mm,1130 m long with holding clamp, nut & bolts etc. all galvanized as per SBD (SP)
PP of suitable size for Top portion of STP-410, SP-23 Pole
6 SWG GI wire
GI wire 8 SWG
GI Eye Bolt 16mm dia, 236mm long for guarding
G.I. Wire No. 16 SWG for binding
Stay complete
11 kV Galvanized Stay Set Complete 16ϕX1800 mm. with 2 no. turn-buckle, anchor plate (200x200x6mm) as per scope of work in SBD
GI Stay Wire 7/10 SWG
11 kV Stay Insulator as per SBD
Stay Clamp (50x8mm) with Nuts, Bolts & warshers all galvanized
Grouting and Muffing with Cement Concreating ratio of 1:3:6
New LT Line: Proposed Cabling Works for New DTR New LT Line with AB Cable
New LT line with Insulated ABC of 3x25+1x25 Sq.mm.
Steel Tubular Poles 8.5 m long (STP 8.5 M, 410 MPa , SP-21) as per IS 2713 (Parts 1 to 3): 1980 (Bottom Portion hot dip galvanized) with MS Plate (300ɸx6)
Suspension clamp assembly suitable for AB Cable with all fittings and S.S.strap
Dead end clamp assembly suitable for AB Cable with all fittings and S.S.strap
L.T. Insulation Piercing Connectors for energizing distribution kiosk/box & Jumpering
Mid span jointing sleeves (25 Sq.mm.)
PG Connector/Wedge type 25 Sqmm.
Supply & Fixing of LT distribution boxes/kiosk on the LT poles including all clamps & material required for mounting, connections & sealing.
Insulated ABC of 3x25+1x25 Sq.mm.
1x16 mm2 XLPE/PVC insulated Al. cable for energising the distribution boxes/ kiosks/Street light
LT Stay complete
11 kV Galvanized Stay Set Complete 16ϕX1800 mm. with 2 no. turn-buckle, anchor plate (200x200x6mm) as per scope of work in SBD
GI Stay Wire 7/10 SWG
LT Stay Insulator
Stay Clamp (50x8mm) with Nuts, Bolts & warshers all galvanized
Grouting and Muffing with Cement Concreating ratio of 1:3:6
Rod type earthing of pole by MS earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete all galvenized
Rod type earthing of pole by MS earthing rod with welded Clamp 40X3mm, Bolts, Washers & Nuts complete all galvenized.
GI wire 8 SWG
Alluminium paint (Double Coat)
Red Oxide paints
Grouting and Muffing with Cement Concreating ratio of 1:3:6
LT Connection
LT Connection (Electronic KWH Meter 1PX2W 10-60 Amp with Box with LT PVC cable 2x4 sqmm)
New Service Connection
1-Ph 2 wire, 10-60Amp, 1.0 Accuracy class static electronic meter With polycarbonate box and comunication facility
SMC board 300x300x40mm with anchor bolt (4 nos for each SMC board)
PVC Insulated un-armour Cable 2CX4 Sqmm.
G.I. Wire No. 10 SWG for support of consumer cable
UTTARANCHAL FORGINGS INDUSTRY
UTTARANCHAL FORGINGS INDUSTRY
UTTARANCHAL FORGINGS INDUSTRY
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.52 MB
BOPNIT.pdf
Tender Documents • 0.45 MB
Guildlines_Amendements_issued_By_PFC.rar
Tender Documents • 12.13 MB
Technical_UPCL_RDSS.rar
Tender Documents • 14.16 MB
vendor_list.pdf
Tender Documents • 0.21 MB
Uttarkashi-2_PQR.xls
Tender Documents • 0.05 MB
BOQ_86041.xls
BOQ • 0.46 MB
Tender_Specs-SBD.rar
Tender Documents • 18.78 MB
Download all tender documents and submit your bid