Loading
Loading…
Loading…
Tender Value
₹46.4 L
EMD Value
₹92,900
Closing Date
9 Feb 2026, 3:30 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Revenue
Above/Below/Par
DRM/WORKS
25 conditions · 3 needing a document upload
"The said suppliers of goods and/or services would be subject to GST Act and Rules as applicable from time to time. Tenderers are requested to submit their offers as per GST Tax regime. All the bidders/tenderers should ensure that they are GST compliant and their quoted tax structure/rates are as per GST Law"
Successful tenderers are required to submit the number of labour to be employed for this particular work. Also the list showing names, along with all other details, of male and female workers employed in this work, should be submitted to office, at the time of submitting performance guarantee and before executing contract agreement. They should also ensure that 1) The payment to the contract labour should be made through bank/cheque. 2) Identity Cards should be issued to all contract workers. 3) Necessary steps should be taken to deduct provident fund from the payment made to contract labour and ensure that the same is credited to their Provident Fund account. 4)Medical facilities from ESI should be ensured, if applicable.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Tenderers are required to submit a copy of cancelled cheque in order to facilitate the payments regarding refund of EMD etc. in their proper accounts.
Format of Declaration and Self certificate in case of small value tenders, (i.e. tender value less than Rs. 50 lakhs), is being attached in Documents Tab. Tenderers should download, fill and submit both the proforma along with their offer, failing which offer may be rejected summarily.
In addition to latest provisions of GCC, and all contents of tender documents, all other latest instructions of Railway Boards issued vide various letters received from time to time on concerned matters and related to tender, will also be applicable for the tenders as per necessity and tenderers have to co-operate with Railways and ensure the compliance
Indian Railways Standard General Conditions of Contract, April 2022 (GCC, April 2022) has been introduced and available on website with all correction slips issued up to date for inviting tender and same will be applicable for this tender. Advance Correction Slip No. 1, 2, 3, 4, 5, 6, 7, 8, 9 and 10 to Indian Railways Standard General Conditions of Contract, April - 2022 circulated by the Railway Board vide letter No. 2022/CE-I/ CT/GCC-2022/Policy dated 14.07.2022, 13.12.2022, 26.04.2023, 07.08.2023, 20.10.2023 , 21.12.2023, 25.09.2024, 20.12.2024, 09.01.2025 and 04.03.2025 are applicable to this tender. Tenderers are requested to download the same from the railways website and ensure the implementation of the latest provisions made in GCC while execution of work. After that, if any latest correction slip issued by Railway Board on any matter, will also be applicable with immediate effect, though not mentioned in original tender document.
I/We agree to carry out all works with use of modern equipments of required capacity for the work without extra payment. The decision of railway engineer shall be final and binding in this regard.
It is the responsibility of contractor to arrange the payment of the labour employed for the work through bank and to deduct PF as per the provisions of Minimum Wages Act.
The quantities shown above are approximate and to give a general guideline. Railway reserves a right to increase, decrease or to delete any of the items mentioned in schedule.
As per ACS 1 to GCC April 2022, issued vide Railway Board's letter dt. 14.07.2022, PVC Clause shall be applicable only in tenders having advertised value above Rs. 2 Crores provided to the provisions as per clause 46A-1. Tenderers should take a note and quote their rates accordingly.
In case Civil work tenders, the quantity of cement required in the items where necessary, will be used by the contractor on the same rates as accepted in tender, as per the quantity mentioned against each item in USSOR/DSR, though not mentioned in tender schedule.
Tenderers are advised to quote their rates including all type of taxes and levies etc. to be paid by them. Any extra payment will not be made on account of taxes/Levies etc., in excess of Contract Agreement Value,
In case of submission of Bid Security in the form of Bank Guarantee, a scanned copy of Original BG valid for a period of 90 days beyond the validity period of tender, and addressed in favour of Sr. DFM/WCR/BPL, shall be uploaded on IREPS portal while applying for tender. And As per ACS 2 to GCC April 2022, circulated vide Railway Board letter dt. 13.12.22, original BG should be delivered in person to the Concerned Official in Office before closing date for submission of bid (i.e. Excluding the last date of submission of bid) without fail. Any failure in this connection shall lead to summary rejection of bid.
Maintenance Period for this work will be 06 months after successful completion of work.
Part-A). Upgradation of Railway Court Tribunal at Habibganj under ADEN(Works)BPL. Part-B). Repairs to OHT Cap. 2.50 Lakh Litres at East Colony Bhopal under ADEN(Works)BPL.
WCR-BPL-W-25-26-HQ-26-135~WCR
WCR-BPL-W-25-26-HQ-26-135
Open
Works - General
6 Months
Bhopal, Madhya Pradesh
₹0
₹92,900
9 Feb 2026
16 Jan 2026
26 Jan 2026
90 items across 3 schedules · ₹28,13,701.26 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | All kinds of soil | cum | 40 | 177.5 | 7,100 |
| 2 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 10 | 7,878.5 | 78,785 |
| 3 | 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 10 | 7,294.7 | 72,947 |
| 4 | Foundations, footings, bases of columns, etc. for mass concrete | Sqm | 40 | 392.15 | 15,686 |
| 5 | Lintels, beams, plinth beams, girders, bressummers and cantilevers | Sqm | 20 | 736.4 | 14,728 |
| 6 | Columns, Pillars, Piers, Abutments, Posts and Struts | Sqm | 30 | 961.3 | 28,839 |
| 7 | Under 20 cm wide | Metre | 50 | 208.55 | 10,427.5 |
| 8 | Thermo-Mechanically Treated bars of grade Fe- 500D or more. | Kg | 200 | 99.65 | 19,930 |
| 9 | Thermo-Mechanically Treated bars of grade Fe- 500D or more. | Kg | 200 | 99.65 | 19,930 |
| 10 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 5 | 9,105.95 | 45,529.75 |
| 11 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | Sqm | 30 | 1,267.95 | 38,038.5 |
| 12 | 4 mm thick glass pane (weight not less than 10kg/sqm). | Sqm | 21.6 | 2,241.8 | 48,422.88 |
| 13 | Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4 mm wide aperture with matching wood beading | Sqm | 20 | 1,800.45 | 36,009 |
| 14 | 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | Sqm | 6 | 3,473.85 | 20,843.1 |
| 15 | 25 mm dia (heavy type) | Metre | 50 | 186.4 | 9,320 |
| 16 | 300x16 mm | Each | 10 | 216.55 | 2,165.5 |
| 17 | 250x16 mm | Each | 10 | 193.7 | 1,937 |
| 18 | 150x10 mm | Each | 15 | 59.45 | 891.75 |
| 19 | 125 mm | Each | 8 | 231.05 | 1,848.4 |
| 20 | 100 mm | Each | 10 | 206.25 | 2,062.5 |
| 21 | 30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm ( +/- 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm ( +/- 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x30 mm and 2 mm ( +/- 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm ( +/- 0.1 mm) wall thickness . The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in- charge. | Sqm | 8 | 3,253.8 | 26,030.4 |
| 22 | Providing and fixing PVC Door Frame of size 50x47 mm with a wall thickness of 5 mm ( +/- 0.2 mm), made out of single piece extruded PVC profile, with mitred cut joints and joint with 2 nos of PVC bracket of size 190 mm x 100 mm long arms of cross section size 35 x 15 mm & self driven self taping screws, the vertical door profiles to be reinforced with 40x20 mm M.S. rectangular tube of 0.8 mm , including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5 mm PVC frame strip with PVC solvent cement on the back of the profile. The door frame to be fixed to the wall using 8 x100 mm long anchor fasteners complete, all as per manufacturer's specification and direction of Engineer -in- charge. | Metre | 22 | 573.45 | 12,615.9 |
| 23 | 125 mm | Each | 10 | 119.2 | 1,192 |
| 24 | 100mm | Each | 10 | 90.45 | 904.5 |
| 25 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. | Sqm | 5.83 | 11,439.6 | 66,692.87 |
| 26 | Hot finished seamless type tubes | Kg | 100 | 206.35 | 20,635 |
| 27 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. | Sqm | 16 | 1,112.7 | 17,803.2 |
| 28 | Size of Tile 600 x 1200 mm | Sqm | 52.5 | 1,798.8 | 94,437 |
| 29 | 110 mm diameter | Metre | 52.5 | 377.4 | 19,813.5 |
| 30 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | Sqm | 50 | 738.65 | 36,932.5 |
| 31 | 1:4 (1 cement: 4 fine sand) | Sqm | 100 | 347.05 | 34,705 |
| 32 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. | Sqm | 1500 | 262.7 | 3,94,050 |
| 33 | Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm | Sqm | 1500 | 193.7 | 2,90,550 |
| 34 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture | Sqm | 40 | 176.25 | 7,050 |
| 35 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture | Sqm | 100 | 170.7 | 17,070 |
| 36 | Dismantling W. C . Pan of all sizes including disposal of dismantled materials including malba all complete as per directions of Engineer-in-Charge. | Each | 4 | 134.1 | 536.4 |
| 37 | Of area 3 sq. metres and below | Each | 20 | 143.5 | 2,870 |
| 38 | For thickness of tiles 10 mm to 25 mm | Sqm | 20 | 73.4 | 1,468 |
| 39 | 60mm thick cement concrete paver block of M- 35 grade with approved colour, design & pattern. | Sqm | 100 | 1,045.65 | 1,04,565 |
| 40 | W.C. pan with ISI marked white solid plastic seat and lid | Each | 4 | 6,515.55 | 26,062.2 |
| 41 | White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps | Each | 6 | 2,648.85 | 15,893.1 |
| 42 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge. | Each | 4 | 349.15 | 1,396.6 |
| 43 | 32 mm dia | Each | 6 | 119.55 | 717.3 |
| 44 | Providing & fixing white vitreous china water less urinal of size 600 x 330 x 315 mm having antibacterial /germs free ceramic surface, fixed with cartridge having debris catcher and hygiene seal. | Each | 3 | 18,088.45 | 54,265.35 |
| 45 | 20 mm nominal dia Pipes | Metre | 50 | 537.6 | 26,880 |
| 46 | 50 mm nominal dia Pipes | Metre | 50 | 794.25 | 39,712.5 |
| 47 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | Per Litre | 2000 | 11 | 22,000 |
| 48 | Powder coated aluminium (minimum thickness of powder coating 50 micron) | Kg | 100 | 530.9 | 53,090 |
| 49 | Powder coated aluminium (minimum thickness of powder coating 50 micron) | Kg | 35 | 634.45 | 22,205.75 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .