State PlanSTATE PLAN 202223 Supply Erection Testing and Commissioning of 40 HP

Supply and erection of 40 HP pump- Electrical work

OD38958/2023-2024:(A)PUMP:- Supply , erection , testing and commissioning of Kirloskar reputed make centrifugal pump sets with Bronze/SS impeller , SS shaft and CI pump casing with suitable type of base plate with coupling, coupling guard foundation bolts and nuts etc. complete suitable for coupling the pump and motor above the base plate etc complete including providing suitable concrete foundation including cost of cement, sand and metal etc complete the duty condition is as follows discharge - 69 lps, total head - 30 m, Speed -1460 rpm (B). MOTOR:- supply , erection , testing and commissioning of Kirloskar reputed make horizontal solid shaft foot mounted TEFC squirrel cage induction motor suitable for the above pump working 3 phase 50HZ AC supply , working voltage 415 V / 3300 V . The motor shall confirm to EEFI /IS325 including providing suitable concrete foundation including cost of cement, sand and metal etc complete. Flexible coupling shall be used for coupling of pumps and motors (C).STARTER:- Supply, erection, testing and commissioning Supply ,erection testing and commissioning of suitable rating 415V ,3Phase heavy duty Soft starter with all protections,digital type multifunction meters , indicators and shall be provided with a bypass contactor of suitable rating ,earthing ,busbar interconnections, control wiring complete as per standards and supplying of suitable size cables with all terminations required of best quality ISI make for panel board from insulator to starter, starter to motor ,capacitors etc, including necessary cabling through suitable PVC conduit and cable trays ,termination cables ,gland etc .confirming to Safety regulations.

OD134554/2023-2024:Supply, laying, testing and commissioning of 1.1 KV grade 3.5Core x 185sq.mm Aluminium conductor armoured cables for the above pump set from panel board to starter

OD134553/2023-2024:Supply, laying, testing and commissioning of 3 runs 70 sq.mm PVC insulated copper cable through 63 mm PVC pipe, flexible hose and accessories from starter to motor considering energy conservation

OD134552/2023-2024:Supply of all material and providing duplicate earthing by 25 x 3 mm copper strip on wall /column/floor/ buried (Appx. 20 mtrs) in ground and giving double earthing to motor, starter, panel board etc. and connect with existing earthbus. As per IE standards

OD134551/2023-2024:Supply, erection, testing and commissioning 25 KVAR of heavy duty APP capacitor for the above motor to get unity power factor . The capacitor shall confirm to IS 2834

OD15587/2023-2024:Dismantling existing cable connections, dismantling existing motor and pump set including structural base, dismantling existing sluice valve , NRV ,existing suction and delivery MS/CI pipe line including hire of tools, labour charges, etc. complete and stacking the dismantled items as per the direction of departmental officers.

15.2.1:Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Repairing of 4 pole structures

OD13440/2023-2024:Supply and laying of 3 x 150 sq.mm 11 KV XLPE aluminium armored cable burning on ground /wall/column/cable tray complete with earth work excavation, supply and provide mechanical protection for burning cable, dressing and clamping etc.complete with labour

4.1.4:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 )1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size)

OD13472/2023-2024:Supplying of necessary spare parts repairing and servicing of 11 KV double insulator type AB Switch units in all 3 phases

OD13558/2023-2024:Disconnection and dismantling of damaged lightening arrestor from structure supply and fixing of new 3 piece metal oxide type gapless lightening arrestore set for 11 KV OH lines GI clamp, bolt, nut, washers and labour

OD15241/2023-2024:Disconnection and dismantling of damaged insulator, supply and fixing new 11 KV pin insulator with metal parts complete with labour

OD15284/2023-2024:Supply of necessary copper wire and fixing hard wares, repairing of jumper and bus bar connections complete with labour

OD15293/2023-2024:Fabrication, painting, supply and changing of 'C' chanel cross arm made out of 100 x 50 x 5 mm MS chanel at the length of 3.4 mtrs. complete with necessary clamps, bolt, nuts and labour

OD15340/2023-2024:Supplying of materials scraping and painting of 11 KV 4 pole structure with a coat of approved color enamel paint over a coat of metal oil primer complete with labour

OD15428/2023-2024::Fabrication, supply and erection of fencing for transformer yard up to a height of 2.0 m using 2.5 m long 40x40x6 mm angle supports at 1.2 m interval erected in ground 0.5 m below and 2.0 above ground level the bottom portion grouted on 1:3:6 cement concrete, providing necessary length 25x6 flat iron horizontals at 80 cm intervals, and providing 10 mm MS rods vertically fitted at 10 cm interval and Chain link fabric fencing mesh of size 50x50 mm made of G.I. wire of dia 4 mm. PVC coated to outer dia 5 mm all around the yard fixed on the frame work including excavation of soil, leveling, painting 2 coats of aluminium paint over 2 coats of epoxy primer and spread 40 mm broken granite gelly over spreading a layer of sand in the yard as per standards

OD15498/2023-2024:Supply and fixing of 2 mx 1.8m size gate with 40X40X6mm angle frame with 3 Nos MS flat central cross support of 25x6mm flat iron and 10mm rod as vertical welded with 10cm apart to the gate frame hinged to the existing fencing pole, providing locking arrangements and painting 2 coats of aluminium paint over 2 coats of epoxy primer

OD15500/2023-2024:Charges for preparation of electrical scheme and connected paper to submit electrical inspectorate/KSEB, getting approval, power allocation,, preparation of completion report, arrange site inspection, getting energisation sanction, assist to execute new HT agreement with KSEB excluding statutory fee and deposit to KSEB.

OD140090/2023-2024:Supplying and spreading 53mm to 22.4mm Stone aggregate in Transformer yard.

OD140636/2023-2024:Maintenance of existing light post in the compound of pump house

Mechanical Work

100.98.484:Supply of CI Double Flanged Sluice Valve Conforming to IS 14846 - 2000, Sluice Valve with Hand Wheel PN 1.6, Size 150mm.

100.31.2.4:Conveying and fixing C.I. sluice valves (with cap) by providing bolts, nuts, rubber insertions etc., complete, but excluding the cost of the valve (tail pieces, if required, will be paid separately): 150mm diameter, Class II.

100.37.6.1:In situ fabrication of M.S. pipes of size 150mm (I.D.) using 8mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete.

100.37.6.2:Fabricating M.S. flanges of diameter 150mm using 12mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete: For pipes fabricated with 8mm thick M.S. plates.

100.37.6.3:Cutting 150mm (I.D.) M.S. pipes for making bends and other specials by gas cutting including cost of gas, all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.

100.37.6.4:Welding 150mm (I.D.) M.S. pipes for making bends and other specials by gas/electric welding machine including cost of gas and welding rods, all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.

100.37.6.5:Grinding cut and weld edges of 150mm (I.D.) M.S. pipes during fabrication work including all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.

100.98.483:Supply of CI Double Flanged Sluice Valve Conforming to IS 14846 - 2000, Sluice Valve with Hand Wheel PN 1.6, Size 125mm.

100.31.2.3:Conveying and fixing C.I. sluice valves (with cap) by providing bolts, nuts, rubber insertions etc., complete, but excluding the cost of the valve (tail pieces, if required, will be paid separately): 125mm diameter, Class II.

OD138907/2023-2024:In situ fabrication of M.S. pipes of size 125mm (I.D.) using 8mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete.

OD139120/2023-2024:Fabricating M.S. flanges of diameter 125mm using 12mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete: For pipes fabricated with 8mm thick M.S. plates.

OD139121/2023-2024:Cutting 125mm (I.D.) M.S. pipes for making bends and other specials by gas cutting including cost of gas, all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.

OD140009/2023-2024:Welding 125mm (I.D.) M.S. pipes for making bends and other specials by gas/electric welding machine including cost of gas and welding rods, all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.

OD140008/2023-2024:Grinding cut and weld edges of 125mm (I.D.) M.S. pipes during fabrication work including all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.