Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹22.9 LAccepted-AOC 79 TILLA KUNJABAN AGARTALA WARD NO 3 AMC WEST TRIPURA PIN 799006 | AGARTALA | WEST TRIPURA | TRIPURA | 799006 | ₹22.9 L | L1 | Accepted-AOC Awarded as L1 Bidder |
| 2 | L2₹23.1 LRejected-AOC CHAIGARIA MAHARANI UDAIPUR GOMATI DISTRICT 7005576239 | 700557 | ₹23.1 L | L2 | Rejected-AOC Process for next step |
Tender Value
₹22.9 L
EMD Value
₹45,796
Closing Date
8 Apr 2026, 3:00 pmClosed
The EE, MCD, PWD(B),ILS Road, Agartala
O/O The EE, MCD, PWD(B),ILS Road, Agartala
Repairs and Maintenance of different units of Blood Bank and DRTB Center Building in FY 2026-2027 under AGMC and GBP Hospital, Agartala
2026_CEPWD_71841_1
01/EE/MCD/PWD(B)/2026-27
Open Tender
Civil Works - Building
300 days
AGMC and GBP Hospital, Agartala
Please refer to tender documents.
2 documents required · 2 mandatory
₹1,000
₹45,796
30 Apr 2026
1 Apr 2026
8 Apr 2026
1 Apr 2026
8 Apr 2026
1 Apr 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount | Item Code |
|---|---|---|---|---|---|---|
| 1Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - -All work upto plinth level: 1:2:4 ( 1 Cement: 2 fine sand : 4 graded stone aggregate 20 mm nominal size) | ||||||
| 2Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veeners on both faces of shutters 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. | ||||||
| 3Providing and fixing factory made door frame (single rebate) made of solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 60mm width & 30mm thickness and shall be fixed to wall as per instructions of Engineer-In-Charge using 100x8 sheet metal CSK screws. | ||||||
| 4Providing and fixing 28 mm thick door shutter made of solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 71mm width & 28mm thick as vertical & horizontal styles. Joints are made using solvent adhesive and GI ‘C sections (39mm x 19mm x 0.6mm thick) or M S pipe (40mm x 20mm ) stiffener frame insert & telescopic polymeric ‘L’ corners .The panel shall be filled with 3mm thick high - pressure compact laminate as per manufacturer’s specifications and directions of the Engineer-incharge, cover moulding shall be provided for covering fixing screws and elegant look.( for W.C. bathroom door shutter). | ||||||
| 5Dismantling old plaster or pointing, raking out joints, cleaning and preparing the surface for re- plastering or re-pointing including disposal of rubbish to the dumping ground with all leads and lifts etc.complete as per direction of the Engineer- in- charge. | ||||||
| 612 mm cement plaster of mix In cement mortar 1 : 4 ( 1 cement : 4 fine sand ) | ||||||
| 7Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete | ||||||
| 8Wall painting with acrylic plastic emulsion paint of approved brand and manufacture to give an even shade [Payment shall be made after submission of Test Certificate issued by the Manufacturer] : Two or more coats on new work | ||||||
| 9Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour [Payment shall be made after submission of Test Certificate issued by the Manufacturer]. One coat | ||||||
| 10Providing and fixing IS : 3564 marked aluminium extruded section body tubular type universal hydraulic door closer with double speed adjustment with necessary accessories and screws etc. complete. | ||||||
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.PDF
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.80 MB
DNIT.pdf
Tender Documents • 3.05 MB
Integrity.PDF
Additional Documents • 0.18 MB
BOQ_73112.xls
BOQ • 0.41 MB
Download all tender documents and submit your bid