RequiredExperience with Government
RequiredAnnual Turnover
RequiredCertificate (Requested in ATC) Bid to RA enabled Yes Uniform Pc-pv Suiting ( 246876 meter ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) SPECIFICATION Conformity to Indian Standard IS:15853-2009 with latest amendments * CERTIFICATION Whether BIS marked Yes Yes BIS License No. - * COLOUR Shade Khaki Khaki DIMENSIONS Width excluding selvedge (cm) 150 150.0 1/5 The piece length to be supplied shall be 20 mtrs and above in full metres without fractions. Short length pieces of 10 metres and above upto 19 metres will be acceptable to the extent of 5% of the total quantity ordered. Yes * The tolerance in length and width of fabric shall confirm to the provisions of Govt: of India
RequiredMin. of Commerce (Trade and Merchandise marks)notification number SO 2973 dated 20-09-1962. Relevant portion of the notification is reproduced as "in pieces
Requiredthe stamped width shall not be greater or less than the actual width at any point by more than 3%
Requiredprovided that the average width of the piece in question is equal to or exceeds 98% of the stamped width". "in pieces stamped as of length above 10 meters
Requiredthe stamped length shall not be greater or less than the actual length by more than 1% Yes * COMPOSITION Fibres composition in percent Polyester- 67 Viscose- 33 Polyester- 67 Viscose- 33 CONSTRUCTION Threads/dm: Warp 260 * Threads/dm: weft 190 * Mass (g/square mtr) 190 * SELVEDGE Width of selvedge shall not exceed 10 mm. Manufacturers name or Trade mark shall be woven on both selvedges throughout the length. The same shall be clearly visible Yes * 2/5 even after Processing Finishing. The yarn used for weaving manufacturers name shall be of the same colour of body
Requiredwoven at an interval not exceeding 30 cm between two markings. OTHER REQUIREMENTS Fabric with Soil release and anti bacterial activity value requirements No Yes
RequiredNo TEST REPORT Availability of test Report from Central govt/NABL/ILAC accredited laboratory to prove conformity to the specification Yes Yes Name of lab where test conducted - * Address of the lab - * Test report and certificate No. - * Test Report and certificate Date - * Test reports to be furnished to buyer on demand
Requiredif claimed to be available Yes * ADVANCE SAMPLE * Bold specifications are the golden parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer.