REPAIR REPLACEMENT OF STREET LIGHT AND CONNECTED WORKS IN ORA AMBC TRG AREA SQNS AND ETTIKULAM AREA AT INA EZHIMALA

Amount

Notes for all items of BOQ:- a) Contractor has to provide one electrician and one helper each day including sunday and holidays to collect complaints from complaint cell/ JE E/M/ AGE E/M and rectify the same within 48hrs(two days) otherwise recovery will be done at Rs. 1000 per complaint per day delay. b) Contractor has to maintain complaint slip/ register and record day to day complaints and after rectification has to get signature of user/JE E/M on daily basis. c) Contractor has to provide necessary safety equipments and will be fully responsible for any incidents occuring on site. d) Contractor has to visit the site before quoting the tender. e) Contractor has to provide proper ladder arrangement to work at any height of street light pole. f) If the contractor failed to provide electrician to attend complaint or absent to attend complaints then recovery will be done at Rs. 2000 per day. g) For all items involving excavation work contractor has to obtain clearance from Stn HQ, in case of damage to any property he would be liable for its rectification.

M&L for taking down the unserviceable LT UG cable of size of 6 Sqmm to 16 sqmm 4 core including removing electrical connection and keeping side serviceable cable, removing cable protection cover etc complete all as specified and as directed.

Exacavation in trenches not exceeding 1.5 mtr in width and depth and getting out in hard/dense soil complete all as specified and as directed by Engr-in-charge. Note:- The excavation has to be done manually only.

Returing and filling in including levelling watering and well ramming into layers not exceeding 25 cm thick in hard/dense soil complete all as specified and directed by Engr-in-charge.

Removal of excavated soil to a distance not exceeding 50 mtrs and depositing at a level not exceeding 1.5 mtr from starting point complete all as specified and directed by Engineer-in-Charge.

Supply and spreading riddle earth for cushioning and covering of the UG cable in trenches complete all as specified and as directed.

Supply and lay PCC un reinforced LT cable cover of size 250 mmx150mmx40mm , class LV type I flat for cable protection complete all as specified and as directed.

Relaying of PCC un reinforced LT cable cover of size 250 mmx 150mmx40mm complete all as specified and directed by Engr in charge. Note:- Serviceable cable cover obtained from ser item no 1 shall be used.

Relaying of cable XLPE insulated heavy duty galvanised steel strip armoured LT 1100 volt grade with aluminium conductors multistranded confirming to IS laid in trenches/pipes/wall size up to 16 sqmm 4 core complete all as specified and as directed. Note:- Serviceable cable obtained from ser item no 1 shall be used.

Supply and laying LT cable in trench/fixing to walls/pipe/pole with proper saddles, lugs,glands XLPE insulated heavy duly galvanised steel strip armoured LT 1100 volt grade with aluminium conductors of size 16 sqmm 4 core complete all as specified and as directed.

All as per item no. 10 above but size of 10 sqmm 4 core complete all as specified and as directed.

Supply and laying LT cable in trench/fixing to walls/pipe/pole with proper saddles, lugs,glands XLPE insulated armoured cable with copper conductors of size 2.5 Sqmm 3 core complete all as specified and directed.

M&L for mass filling in foundation/coping/wall with PCC 1:3:6 using 20 mm graded aggregate type C1 as site requirement complete all as specified and directed by Engr in charge.

M&L for dismantling/removal of existing pole of post top lantern of any type from it's position/foundation after necessary excavation and earth work and refixing on site complete all as specified and as directed.

Cutting the existing road/hard standing made of concrete or premix carpet, WBM, soling and moorum filling including excavating for laying the cable/pipe, width 0.5 Mtr and depth 0.7 Mtr all as directed and making good the road/hard standing using pre mix bituminous as required at site to match with the existing surface complete all as specified and as directed. Note:- Before using the hand drilling/ breaker machine diamond cutter will be used all as directed by Engr-in-charge.

Supply and fix in replacement of GI tubing light grade 50 mm nominal dia in trench/road/pole for cable protection complete all as specified and as directed.

All as per item no.16 above but size of 40mm nominal dia complete all as specified and as directed.

Supply and fix in replacement of copper cable flexible 2.5 Sqmm 3 core 230 Volts complete all as specified and as directed by Engr-in-charge.

Supply and fix in replacement of digital time switch day programme three pole complete all as specified and as directed.

Supply and fix in replacement of contactor four pole 415 volt 63 Amp complete all as specified and directed by Engr in charge.

Supply and fix in replacement of post top,energy saving, enviormental friendly , spun aluminium landscape luminaire with high power LEDs as light source of 40 watt suitable for pole dia of 50 mm complete all as specified and directed by Engr in charge. Make:- Cat part no LPT0 40 CDL of CG or equivalent in Havells/Bajaj/Wipro.

Supply and fix in replacement of bollard light fitting tulip/robust type with soft 360 light 10W with IP 65 proctection complete all as specified and directed by Engr in charge. Make:- Cat part no.LBLTW-10-WW of Crompton or equivalent in Havells/Bajaj/ Wipro.

Supply and fix in replacement of old unserviceable street light fitting with LED street light fittings luminaire 60 watts ,240V 50Hz pressure die cast aluminium coating, heat resistant glass, IP 66 rating,Nexus+ type complete all as specified and directed by Engr in charge. Make:- Cat part no CRP 409-60-57-SL-GL-NSG of crompton or eqivalent in Philips/Havells/Wipro.

Supply and fix in replacement of post top,energy saving, enviormental friendly, spun aluminium landscape luminaire with high power LEDs as light source of 25 watt warm white/ CDL suitable for pole dia of 50 mm complete all as specified and directed by Engr in charge. Make:- Cat part no BGCTN 25 W LED WH/ of Bajaj or equivalent in Philips/ Crompton/Havells.

Supply and fix in replacement of die cast aluminium IP 66 120 W LED flood light luminaire on poles / buildings of any height using proper ladder arrangements complete all as specified and directed by Engr in charge. Make:- Crompton Model No LFLN-120- CDL/60 or equivalent in Philips/Havells.

Supply and fix in replacement of die cast aluminium IP 66 70 W LED flood light luminaire on poles/ buildings of any heights complete all as specified and directed by Engr in charge. Make:- Crompton model No. LFL 70 CDL /60M or equivalent in Philips/Havells.

Supply and fix in replacement of bracket made out of GI pipe medium grade, 50 mm dia, 90 cm long for fixing street light with and including clamps, nuts, bolts, washer, complete accessories etc and applying two coats of oil painting over one coat of red oxide zinc chrome primer complete all as specified and directed by Engineer-in-Charge.

Taking down the defective security light fittings /street light fittings of any type from 11/10/8.5 Mtr Swan neck type pole and refixing in same position after carrying out necessary repair work/replacement of burn out parts and cleaning the fittings completly including replacement of minor burn out spares such as driver/clamps/wire etc complete all as specified and directed by Engr-in-charge.

Supply and fix in replacement of weather proof street light junction boxes made out of thermo plastic consisting of 4 nos of connectors of capacity 40 amp 415v and 1no of SP MCB rating 6 AMP 240 V with proper closing arrangement, elmax connector for neutral link including pole mounting clamp with nut bolts.The box should have two cable entry and should be able two accomodate two cables of size 25Sqmm with proper space between each phases complete all as specifed and directed by Engineer-in-Charge.

Supply and fix in replacement of LED bulb B22 Type 09 Watts in Gardern lights/ Dome lights after removing the outer cover and refixing the same after replacement complete all as specified and directed by Engr in charge.

M&L for scrapping out faded / rusted old paint from street light pole of 9m height using wire brush,emery paper and prepairing surface for painting, applying one coat of alluminium paint on poles including cross arms, bolts and nuts, anti climbing device etc and writing existing pole number with black paint over a yellow base complete all as specifed and directed by Engineer-in-Charge.

M&L for welding of double arm decorative poles at joints by removing rusts from existing poles and patching of holes and making the surface even and jointing the arms using necessary fixtures using welding or bolts and nuts complete all as specified and directed by Engr in charge.

pk janardhanan

Sreekrupa Enterprises

ROTECH ENGINEERS AND BUILDERS

Linsta Services