DAY TO DAY MAINT OF FURNITURE LOT F IN MD OTM ACCN UNDER AOR OF GE ROORKEE

Amount

Locker steel FD-1029/ similar pattern. Removing the existing unserviceable part and S&F following similar new part as per Drg and as directed by Engr-in-Charge.

Shelf

Cleat for shelf

Conduit pipe

Handle

Hasp & Staple

M&L for spot welding/run welding (not exc one inch in length) to old steel items including scraping, preparing surface of welded portion, grinding where ever required to give smooth finish complete all as specified and directed. Note:- The welding required for fixing of new steel parts will not be measured against this item. The same to be treated as included in rates of the relevant item of work catered for replacement of new part.

M&L for prepararing old decorated / new steel surfaces of repaired / existing furniture including removing dents/spots (if any), tightening of joints etc in old furniture, cleaning the surfaces, rubbing by emery paper, filling the gaps with putty, priming the new /welded surfaces as required and applying two coats of synthetic enamel paint to give glossy finish complete all as specified and directed by Engineer-in-Charge at Furniture Yard, Md / OTM accns under AOR of GE

Table 3'x2' steel FD-1008, 1007 similar patern. Removing the existing unserviceable part and S&F following similar new part as per Drg and as directed by Engr-in-Charge.

Hard top sheet

Rubber shoe

Top/bottom long stiffener

Top/bottom short stiffener

Drawer without lock

Lock for Drawer (for FD-1008 only )

M&L for spot welding/run welding (not exc one inch in length) to old steel items including scraping, preparing surface of welded portion, grinding where ever required to give smooth finish complete all as specified and directed. Note:- The welding required for fixing of new steel parts will not be measured against this item. The same to be treated as included in rates of the relevant item of work catered for replacement of new part.

M&L for prepararing old decorated / new steel surfaces of repaired / existing furniture including removing dents/spots (if any), tightening of joints etc in old furniture, cleaning the surfaces, rubbing by emery paper, filling the gaps with putty, priming the new /welded surfaces as required and applying two coats of synthetic enamel paint to give glossy finish complete all as specified and directed by Engineer-in-Charge at Furniture Yard, Md / OTM accns under AOR of GE

Table 3'x3' steel FD-1009/similar patern. Removing the existing unserviceable part and S&F following similar new part as per Drg and as directed by Engr-in-Charge.

Hard top sheet

Rubber shoe

Stiffener

M&L for spot welding/run welding (not exc one inch in length) to old steel items including scraping, preparing surface of welded portion, grinding where ever required to give smooth finish complete all as specified and directed. Note:- The welding required for fixing of new steel parts will not be measured against this item. The same to be treated as included in rates of the relevant item of work catered for replacement of new part.

M&L for prepararing old decorated / new steel surfaces of repaired / existing furniture including removing dents/spots (if any), tightening of joints etc in old furniture, cleaning the surfaces, rubbing by emery paper, filling the gaps with putty, priming the new /welded surfaces as required and applying two coats of synthetic enamel paint to give glossy finish complete all as specified and directed by Engineer-in-Charge at Furniture Yard, Md / OTM accns under AOR of GE

Table office clerk steel FD-1004/ similar pattern. Removing the existing unserviceable part and S&F following similar new part as per Drg and as directed by Engr-in-Charge.

Hard top sheet

Drawer without lock

Lock for Drawer

top/Bottom long Stiffener

top/Bottom short Stiffener

Rubber shoe

M&L for spot welding/run welding (not exc one inch in length) to old steel items including scraping, preparing surface of welded portion, grinding where ever required to give smooth finish complete all as specified and directed. Note:- The welding required for fixing of new steel parts will not be measured against this item. The same to be treated as included in rates of the relevant item of work catered for replacement of new part.

M&L for prepararing old decorated / new steel surfaces of repaired / existing furniture including removing dents/spots (if any), tightening of joints etc in old furniture, cleaning the surfaces, rubbing by emery paper, filling the gaps with putty, priming the new /welded surfaces as required and applying two coats of synthetic enamel paint to give glossy finish complete all as specified and directed by Engineer-in-Charge at Furniture Yard, Md / OTM accns under AOR of GE

Table office officers steel FD-1003/ similar pattern. Removing the existing unserviceable part and S&F following similar new part as per Drg and as directed by Engr-in-Charge.

Hard top sheet

Shutter with hinges

Top/bottom long stiffener

top/bottom short stiffener

Drawer without lock

Lock for Drawer

Rubber shoe

M&L for spot welding/run welding (not exc one inch in length) to old steel items including scraping, preparing surface of welded portion, grinding where ever required to give smooth finish complete all as specified and directed. Note:- The welding required for fixing of new steel parts will not be measured against this item. The same to be treated as included in rates of the relevant item of work catered for replacement of new part.

M&L for prepararing old decorated / new steel surfaces of repaired / existing furniture including removing dents/spots (if any), tightening of joints etc in old furniture, cleaning the surfaces, rubbing by emery paper, filling the gaps with putty, priming the new /welded surfaces as required and applying two coats of synthetic enamel paint to give glossy finish complete all as specified and directed by Engineer-in-Charge at Furniture Yard, Md / OTM accns under AOR of GE

Charpoy GI pipe FD-220/similar pattern. Removing the existing unserviceable part and S&F following similar new/converted/manufactured part as per Drg and as directed by Engr-in-charge.

Removing the existing unserveceable long rail from charpoy and S&F new long rail manufactured from new GI pipe as per drawing and directed by Engr-in-Charge.

Removing the existing unserveceable short rail from charpoy and fixing new short rail converted/manufactured from unserveceable long rail replaced under serial item No. 6.01 above as per drawing and directed by Engr-in-Charge.

Removing the existing unserveceable leg from charpoy and fixing new leg converted/manufactured from unserveceable short rail replaced under serial item No. 6.02 above as per drawing and directed by Engr-in-Charge.

Removing unserveceable elbow and S&F new ISI marked elbow as per drawing and directed by Engr-in-Charge.

Removing unserveceable check nut and S&F new ISI marked check nut as per drawing and directed by Engr-in-Charge.

Removing the existing unserviceable MS stiffner and S&F new MS stiffener made of 25mmx5mm thick flat iron, 900mm long as per drawing and directed by Engr-in-Charge.

Removing existing unserviceable ply top from frame of charpoy, tightening/refixing of all serviceable loose parts of frame, S&F new 12mm thick plywood BWP grade of size 900mmX1980mm single piece fixed with flush/countersunk 5mm dia and 80mm long bolts & nuts (Mini 10 Nos) with two cup washers to each bolt. Necessary holes to be drilled properly in ply and GI pipe/MS stiffener as required for fixinig bolt with frame of charpoy complete as shown on drawing and directed by Engr-in-Charge.

VARAROHA BUILDERS

JAISWAL ENTERPRISES

M/s R.K.Jain