Rennovation / Repairing Work of Kumar Chhatralay Building (Vi.ja) At Laloda, Ta.- Idar, Dist.- Sabarkantha

(with brief specification and reference to Quantity Rate In figures Unit Amount

book of specifications)

1 Excavation for foundation upto 1.50 mt 74.00 122.99 Cum

depth including sorting out and stacking

of useful materials and disposing the

excavated stuff upto 50 mt lead (A) Loose or

2 Excavation for foundation for depth from 1.5 26.00 287.47 Cum

m to 3.0 m including sorting out and stacking

of useful materials and disposing off the

excavated stuff upto 50 Meter lead. (C) Hard

3 Excavation for foundation for depth from 3.0 17.00 300.80 Cum

m to 5.0 m including sorting out and stacking

of useful materials and disposing of the

excavated stuff upto 50 Meter lead. (C) Hard

4 Earthwork in cuting in all sorts of soil and soft 1110.00 134.20 Cum

murrum including conveying and spreading

the stuff, embankment as and where

directed within 200meters from the end of

the cutting with all required lead and lift.

5 Providing and laying cement concrete 11.00 2944.96 Cum

1:4:8 (1 cement : 4 coarse sand : 8 B.T.

Crushed stone aggregates 40 mm.

nominal size) and curing complete excluding

cost of from work in :(a) Foundation and

6 Providing T M T. bar reinforcement of Fe- 600.00 77.29 KG

500D for R.C.C. work including bending

binding and placing in position complete up

to All floor Level

7 Providing and laying controlled cement 8.00 6525.61 Cum

concrete M250 and curing complete

including the cost of form work but excluding

the cost of reinforcement for reinforced

concrete work for Slab All floors

8 Brick work using common burnt clay building 86.00 4214.33 Cum

bricks having crushing strength not less than

35 Kg./Sq.Cm. in foundation and plinth in

cement mortar 1:5 ( 1-cement : 5-fine sand )

(B) Conventional (For GF)

Description of Item

(with brief specification and reference to Quantity Rate In figures Unit Amount

book of specifications)

9 Providing and laying water proofing 762.00 1160.49 Sq.mt.

treatment with china mosaic tiles flooring

over avg 50 mm C.C. 1:2:4 bedding for

maintaining slope for plain and curve surface

& 12 mm to 20 mm of broken piece not

more than 2.5CM of ceramic / glazed tiles (

one for more colour as directed ) to be laid

over cement mortar bedding of C M 1:3 (1

cement : 3 sand ) contain water proofing

materials per bag of cement useas specified

by manufactured and slops to be tempered

to bring mortar up to surface with using white

cement and colour pigment including

rounding of junctions and extending them up

to 15 cm along the wall and curing with

bends any patens or design as per drawing

and cleaning by using oxalic acid etc.

10 Providing and fixing machine cut, free edges, 21.00 2510.86 Sq.mt.

mirror polished Granite stone slab 18 mm

thick for vertical wall/Doors/Windows

Sill,Jams for cladding as per design

including full moulded round inside edge and

laid on 10 mm thick cement mortar 1:3 (

cement: 3 coarse sand) jointed with grey

cement slurry including rubbing and polishing

finishing etc. complete.

11 Providing & fixing Main Door Fixed by Zinc 24.00 3385.52 Sq.mt.

coated hinges with Double shutter of factory

Made & Stamped I.S 12823 Grade one type

one 35mm Thick Solid core Melamine Faced

Three Layered Resin Flushed Door ,Having

Decorative Lamination On Both Sides &

12mm Thick T.W Beading Around The Door

From Novapan Or Equivalent Company

cm long Stainless Steel pipe handle on both

side SS ASIS 304 Grade,SS Stopper 30 CM,

SS Aldrop 30CM both side each shutter,

fixtures & fastenings as directed by Engineer

in Charge, etc. complete.

12 Providing and fixing Louvers in G.I Channel 17.00 2313.91 Sq.mt.

40x32x5mm size And 114mm Wide G.I

Sheet Having Thickness of 0.55mm &

Weight Not Less Than 490 Gm/Mtr. Roll

Formed to create 84mm wide Louver snap

fixed on special shaped G.I Channel,

Channel shall be Finished with Powder

Coating For Fix Louvers As Directed By

Engineer In Charge.

Description of Item

(with brief specification and reference to Quantity Rate In figures Unit Amount

book of specifications)

13 Providing laying and jointing in true line 15.00 72.65 rmt

and level 15mm dia. U.P.V.C. Pipe ( SCH-

40) for cold water including fittings make

PRINCE / SUPREME / ASTRAL / FINOLEX

or equivalent as approved by Engineer In

Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre

C/C or shall be concealed as directed

including necessary fittings etc. including

testing of pipe and joints and fixing the

same with adhesive solvent, including cost

of all materials.

14 Providing laying and jointing in true line 15.00 91.84 Rmt

and level 25mm dia. U.P.V.C. Pipe ( SCH-

40) for cold water including fittings make

PRINCE / SUPREME / ASTRAL / FINOLEX

or equivalent as approved by Engineer In

Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre

C/C or shall be concealed as directed

including necessary fittings etc. including

testing of pipe and joints and fixing the

same with adhesive solvent, including cost

of all materials.

15 Providing laying and jointing in true line and 20.00 148.12 Rmt

level 40 mm dia. U.P.V.C. Pipe ( SCH-40) for

cold water including fittings make PRINCE /

SUPREME / ASTRAL / FINOLEX or

equivalent as approved by Engineer In

Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre

C/C or shall be concealed as directed

including necessary fittings etc. including

testing of pipe and joints and fixing the

same with adhesive solvent, including cost

of all materials.

16 Providing laying and jointing in true line and 30.00 195.67 Rmt

level 50 mm dia. U.P.V.C. Pipe ( SCH-40) for

cold water including fittings make PRINCE /

SUPREME / ASTRAL / FINOLEX or

equivalent as approved by Engineer In

Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre

C/C or shall be concealed as directed

including necessary fittings etc. including

testing of pipe and joints and fixing the

same with adhesive solvent, including cost

of all materials.

Description of Item

(with brief specification and reference to Quantity Rate In figures Unit Amount

book of specifications)

17 Providing & Fixing chormium plated brass 10.00 220.82 No.

half turn flush cock of approved quality

including fixing in pipe line etc comp. (ii)

18 Providing laying and jointing in true line and 40.00 876.11 Rmt

level 110 diameter U.P.V.C. SWR Type B

pipe confirming to IS 13592-1992 with one

end plain and other end socketed with

rubbering, & fitting conforming to ISI 14735-

1999 of approved make for drainage system

pipe line, pipe shall be jointed with each

other with rubber lubricant, pipe shall be

fixed on wall using of PVC clamp of the

size 110 mm diameter x 149 mm length x

145 mm high at every 2000 mm center to

center or shall be concealed in walls as

directed including necessary fittings such as

bends, shoes etc. including testing of pipes

and joints and jointed with adhesive solvent

cement including cost of all materials.

19 Providing laying and jointing in true line and 45.00 834.38 Rmt

level 160 diameter U.P.V.C. SWR Type B

pipe confirming to IS 13592-1992 with one

end plain and other end socketed with

rubbering, & fitting conforming to ISI 14735-

1999 of approved make for drainage system

pipe line, pipe shall be jointed with each

other with rubber lubricant, pipe shall be

fixed on wall using of PVC clamp of the

size 160 mm diameter x 210 mm length x

196 mm high at every 2000 mm center to

center or shall be concealed in walls as

directed including necessary fittings such as

bends, shoes etc. including testing of pipes

and joints and jointed with adhesive solvent

cement including cost of all materials.

20 Providing and fixing Screw down Quarter 10.00 186.83 No.

turn bib taps of following size (A) Brass

chromium plated screw down Bib tap (I)

mm dia {Plumber, Mark, Esco equivalent

21 Providing & fixing of first quality (ii) Flat Back 5.00 2180.59 No.

washbasin 550 mm x 400mm size. (i) In

white colour. including with approved

sanitary grade material with C.P waste

coupling, waste pipe, 15mm dia Pillar & Stop

Cock of approved brand with connection

15mm dia flexiable pvc pipe etc. complete.

Description of Item

(with brief specification and reference to Quantity Rate In figures Unit Amount

book of specifications)

22 Provision and fixing water closet squatting 5.00 1637.21 No.

orissa type W.c. pan size 580mm integral

footrest and 100 mm P or S trap and in

cluding 25 mm dia CP brass flush valve and

GI inle connection etc. comp. (A) Vitreous

china long pattern white or color (Hindustan,

Cera, Parryware or equivalent

23 Providing and fixing Urinal or approved 10.00 1142.77 No.

quality including conecting the Urinal with

waste pipe , tap etc complete. (A) White

earthenware flat back or corner type size

24 Dismentaling Kota &China mosaic tiled of 822.00 49.18 Sq.mt.

stone floors laid in mortar including stacking

of serviceable materilas and disposal of

unserviceable materials with all lead and lift

25 P & L 24" x 24" vitrified 8 mm thick tile 60.00 1311.18 Sq.mt.

flooring over 20 mm (average) base of

ement mortar 1:6 ( 1 cement: 6 coarse sand)

on new surface or fixing on existing flooring

by adhesive material including dismentaling

of existing flooring and ointed with color

cement slurry including finised with flush

pointing & cleaning he surface etc. complete

for light shade

26 20 mm. Thick sand faced GUTAKA 531.00 321.10 Sq.mt.

FINISHED cement plaster on walls upto

mt height above ground level consisting of

12 mm. Thick backing coat of c.m. 1:3 (1

cement : 3 sand) and 8 mm. Thick finishing

coat of c.m. 1:1 (1 cement : 1 sand)

including making groove 6 mm wide and

8 mm deep as approved pattern etc.

complete as directed.

27 Providing and fixing pre-cast Rubber Dye / 910.00 706.93 Sq.mt.

steel Dye inter locking concrete block 60mm

thick with grade of concrete M300 pnumatic

compressed / vibrated mechanically and as

per approved design Confirming to IS

: 2006 including 35 mm Sand layer for

levelling and filling the joint with sand in

proper line and level as per guidlines of IRC :

SP 63-2018 etc. Complete.

Description of Item

(with brief specification and reference to Quantity Rate In figures Unit Amount

book of specifications)

28 Providing and fixing pre-cast concrete kerb 288.00 374.92 Rmt

stone of gray cement based concrete block

30cm length, 30cm height and 15cm thick of

M250 grade concret as per approved design

and including excavation for fixing in proper

line and level,filling the joint with C:M 1:3

(1cement: 3fine sand) etc complete.

29 Finishing wall with weather proof exterior 375.00 73.75 Sq.mt.

emulsion paint on wall surface (two coats)

to give an required shape even shade after

thoroughly brushing the surface to

remove all dirt, and remains of loose

powdered materials etc complete

30 Dismentling doors, windows, ventilators etc. 27.00 257.48 No.

(wood or steel) shutters including chowkhats

architraves, holdfasts and other attachment

etc. complete and stacking them within all

lead and lift. (ii) Exceeding 3 Sq.M. in area.

31 Providing and fixing Jindal Deluxe 27 mm 10.00 3631.96 Sq.mt.

series or eqivalent Three/two track

Alluminium window with Frame outer top

bottom and side member size 91 x 45 mm

Jindal section no - 21401 , with sliding

shutters of single glass shutter top bottom

& side member size 65 x 28 mm Jindal

section No - 21481 & Inter lock member size

37 x 31.75 mm Jindal section no - 19442 with

5 mm thick transparent bronze colour tinted

float glass for Shutter with Colou Anodized

aluminum Section, Fittings, Fixtures,Rubber

Gasket and transparent silicon sealant glass

fixing to frame as per drawing and instruction

of Engineer - in - charge etc. complete.For

32 Providing and fixing Mosquito Neat to 216.00 1436.22 Sq.mt.

window using properly framed alluminium

sections as per window size.The net shall be

securely fixed with sliding channels/ shutters

to ensure easy operation and

durability.Complete in all respects including

necessary screws, fasteners, handles, and

accessories As Directed By Engineer In

Description of Item

(with brief specification and reference to Quantity Rate In figures Unit Amount

book of specifications)

33 Providing & fixing Rajor coil wire fencing 225.00 868.60 Rmt

having diameter of 0.75 mt including using of

M.S angle 45x45x6mm as per detail drawing,

fixing in cement concrete M-200 etc

completed with one coat of primer & two

coats of oil paint to M.S angle etc. complete

as directed by engineer in charge.

34 Supplying and Fitting, consealed 1.00 30000.00 No.

Electrification including standard ISI mark

Copper Wire gauge minimum 3/20 and

above, 25 Nos of Lightning Point, 10 Nos of

fans, 10 Nos of Tubelight, 1 Nos of Halogen,

7 Nos of 25 Watt CFL Points with 7 Nos of

Amp & 15 Amp including and open well type

horizontal mono block pump set with

stainless steel body having following

specification (A) 0.5 H.P. Single phase

electric accesory electric ELCB 20 amp with

funnel type earthing and other like tubelight

and fan under supervision & as Directed by

Engineer in charge.

Total Rs.

Rupees ThirtyFour Lakh EightySeven Thousand Six Hundred TwentyTwo and Paisa TwentyNine

I / We am / are willing to carry out the work at ________________________________% above / below

percent (should be written in figure and words) of the estimated rate mentioned above. Amount of my /

our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct_________% Below Add_________% Above

Net Rs.__________________ Net Rs.__________________

In words __________________ In words __________________

1 The Contractor shall exhibit a board with detailed specification and details of work as directed by

the Engineer-In-Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills.

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt.

G.R.: PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in

R.C.C. items where there is a change as per actual mix design the cost of difference of cement

consumption have been deducted from the rate of original item at the rate of input rate mentioned

in all the tender.

Signature of Contractor

Deputy Executive Engineer Executive Engineer

R.& B. Sub Division R.& B. Division

Idar Himatnagar