Loading
Loading…
New
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.2 LAccepted-AOC PMC 24 528 GROUND FLOOR NEAR PAYYANUR SERVICE CO OP BANK KOTTY BRANCH PAYANNUR KANNUR KERALA 670307 | PAYYANUR | KANNUR | KERALA | 670307 | L1 | Accepted-AOC Accepted, Being lowest | |
| 2 | L2₹31.1 L+₹3.3 L (11.7%)Rejected-AOC | L2 | Rejected-AOC Rejected, Not being lowest | |
| 3 | L3₹32.0 L+₹4.1 L (14.9%)Rejected-AOC DOOR NO XII 356 A OPP POST OFFICE RAMANTHALI POST DIST KANNUR KERALA 670 308 | RAMANTHALI | KANNUR | KERALA | 670308 | L3 | Rejected-AOC Rejected, Not being lowest | |
| 4 | L4₹32.9 L+₹5.0 L (18.0%)Rejected-AOC DOOR NO 3 79 CHENNNADGRAMAPANCHAYAT PERUMBALA KASARAGOD 681317 | PERUMBALA | KASARAGOD | KERALA | 681317 | L4 | Rejected-AOC Rejected, Not being lowest |
| Sl No | Description | Qty | Unit | Gates Infra Construction Co L1 | SATHEESAN.T.K L3 | KDR CONSTRUCTION L4 | NRI BUILDERS AND MATERIAL SUPPLIERS L2 |
|---|---|---|---|---|---|---|---|
| 1.00 | Demolition and removal of old existing reinforced cement concrete of any description. | 20 | Cum | 450 ₹9,000 Lowest | 500 ₹10,000 | 999 ₹19,980 | 500 ₹10,000 |
| 2.00 | Material and labour for providing pre cast reinforced cement concrete type B-l, 1:2:4 (20 mm graded aggregate) as in drain cover slabs, posts, fencing posts, struts (Reinforcement will be measured and paid separately) including demolition and removal of old existing reinforced cement concrete cover slab of any description. | 20 | Cum | 9,000 ₹1,80,000 | 8,000 ₹1,60,000 Lowest | 9,333 ₹1,86,660 | 12,000 ₹2,40,000 |
| 3.00 | Material and labour for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips. | 975 | Kg | 105 ₹1,02,375 | 100 ₹97,500 | 96 ₹93,600 Lowest | 120 ₹1,17,000 |
| 4.00 | Material and labour for mild steel TMT bars 5mm dia and over upto to10 mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips in stirrups, spacers and binders. | 525 | Kg | 105 ₹55,125 | 110 ₹57,750 | 98 ₹51,450 Lowest | 120 ₹63,000 |
| 5.00 | Demolition of plain cement concrete in ground floor and pavings n exc 15 cm thickness (below or above ground level) | 65 | Cum | 450 ₹29,250 | 250 ₹16,250 Lowest | 999 ₹64,935 | 500 ₹32,500 |
| 6.00 | Demolition of plain cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed. | 46 | Cum | 450 ₹20,700 | 250 ₹11,500 Lowest | 999 ₹45,954 | 500 ₹23,000 |
| 7.00 | Material and labour for PCC precast block 1:2:4 type B1 using 20 mm aggregate as in kerbstones fixed and jointed with CM 1:4 complete all as specified and as directed. | 3 | Cum | 8,500 ₹25,500 Lowest | 11,000 ₹33,000 | 8,999 ₹26,997 | 10,000 ₹30,000 |
| 8.00 | Material and labour for 100 mm thick plain Cement concrete type D- 2, (1:4:8) (40mm graded aggregate) as in subbase complete all as specified and as directed. | 420 | Sqm | 500 ₹2,10,000 | 380 ₹1,59,600 Lowest | 488 ₹2,04,960 | 450 ₹1,89,000 |
| 9.00 | Material and labour for 100 mm thick plain Cement concrete type B- 1, (1:2:4) (20mm graded aggregate) as in hard standing finished the surface even and smooth complete all as specified and as directed. | 200 | Sqm | 750 ₹1,50,000 | 450 ₹90,000 Lowest | 666 ₹1,33,200 | 1,000 ₹2,00,000 |
| 10.00 | Material and labour for PCC type D-2(1:4:8) using 40mm graded crushed aggregate as in mass conc and filling of foundation all as specified and as directed. | 18 | Cum | 5,500 ₹99,000 | 5,000 ₹90,000 Lowest | 8,999 ₹1,61,982 | 5,500 ₹99,000 |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
29 Aug 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(MAINT)EZHIMALA
GARRISON ENGINEER (MAINT) MILITARY ENGINEER SERVICES INDIAN NAVAL ACADEMY POST KANNUR DIST KERALA 670 310
AS PER BOQ AND TENDER DOCUMENTS
2025_MES_723923_1
GE MAINT EZHIMALA 8767
Open Tender
Civil Works
Item Wise
330 days
Ezhimala
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE MAINT EZHIMALA
₹70,000
Yes
25 Sept 2025
1 Aug 2025
4 Sept 2025
1 Aug 2025
29 Aug 2025
15 Aug 2025
1 Aug 2025 - 8 Aug 2025
Amount
Demolition and removal of old existing reinforced cement concrete of any description.
Material and labour for providing pre cast reinforced cement concrete type B-l, 1:2:4 (20 mm graded aggregate) as in drain cover slabs, posts, fencing posts, struts (Reinforcement will be measured and paid separately) including demolition and removal of old existing reinforced cement concrete cover slab of any description.
Material and labour for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.
Material and labour for mild steel TMT bars 5mm dia and over upto to10 mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips in stirrups, spacers and binders.
Demolition of plain cement concrete in ground floor and pavings n exc 15 cm thickness (below or above ground level)
Demolition of plain cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.
Material and labour for PCC precast block 1:2:4 type B1 using 20 mm aggregate as in kerbstones fixed and jointed with CM 1:4 complete all as specified and as directed.
Material and labour for 100 mm thick plain Cement concrete type D- 2, (1:4:8) (40mm graded aggregate) as in subbase complete all as specified and as directed.
Material and labour for 100 mm thick plain Cement concrete type B- 1, (1:2:4) (20mm graded aggregate) as in hard standing finished the surface even and smooth complete all as specified and as directed.
Material and labour for PCC type D-2(1:4:8) using 40mm graded crushed aggregate as in mass conc and filling of foundation all as specified and as directed.
Demolition & removal of old existing block/ laterite/Stone masonry of built in cement mortar of any description.
Material and labour for Pre-cast cement concrete block masonry type C1 1:3:6 (using 20 mm aggregate) with solid blocks, exc. 10 cm in width and setting in cement mortar (1:6) all as specified and as directed.
Material and labour for laterite stone masonry exc. 10 cm in width of squared , regular coursed, well bonded, bedded and solidly hearted, and setting in cement mortar (1:6), all as specified and as directed.
Material and labour for plain cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in surface channels and drains complete as specified and as directed.
Material and labour for PCC Type B-0 (1:2:4) using 12.5 mm graded stone aggregate as in coping, bond stone etc. complete all as specified and as directed. Note: Unit rate quoted shall be deemed to be inclusive of use and waste of formwork.
Material and labour for rendering 15mm thick in CM 1:4 on any faces of brick work or concrete surfaces finished even & smooth without using extra cement complete all as specified.
Taking down cement plaster on brick or stone walls etc including racking out joints, haking for key ,scrubbing down with water,etc.
Material and labour for Rendering 15mm thick in CM 1:4 on any faces of brick work or concrete surfaces finished even & smooth without using extra cement all as specified and as directed.
Material & Labour for applying two or more coats of 100% Premium exterior acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new prepared wall surfaces.
Material & Labour for applying two or more coats of 100% Premium exterior acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old prepared surfaces, including complete removal of old existing treatment on walls using scarpper/ waterjet/ scrubber etc
Demolition of stone slabs, granite, interlock tiles and chequered tiles of any description or thickness in floors aprons etc.laid bedded and pointed in any mortar.
Material and labour for sand filling (50 mm average thickness) under floors in foundations and for laying Interlocking paver blocks including watering and consolidation complete all as specified and as directed by Engr-in-Charge.
Material and labour for machine pressed precast concrete interlocking paver block any shape and size polished with grey cement and pigment confirming to IS 15658-2006 of 60mm thickiness M-35 grade complete all as specified and as directed by Engr-in-Charge..
Material and labour PCC 1:2:4, 25 mm thick type B0 using 12.5mm graded stone aggregate as in floor finished even and fair with out using extra cement complete all as directed by Engr-in-charge.
Material and labour for chequred cement concrete tiles 30cm X 30cm X 25mm thick, set ,pointed & jointed in neat cement slurry in floors polished with white cement & no pigments .Layed over 20mm thick cement screed base (1:6) and all as directed by Engr-in - charge.
Demolition of stone or boulder sett pavings or pitching of any description or thickness laid bedded and pointed in any morter. (200mm average thickness)
Material and labour for stone pitching with rectangular Laterite stone of minimum 200mm thickness grouted with cement and sand mortar 1:6 on slopped surfaces to retain the earth.
Material and labour for stone/ boulder pitching masonry of minimum thickness 200mm , grouted with cement and sand mortar 1:6 on slopped surfaces to retain the earth all as specified and as directed.
Material and labour for stone/ boulder pitching masonry of minimum 200m thick with old retrived Stone/Boulder obtained from the site. Stone/Boulder pitching will be grouted with cement and sand mortar 1:6 on slopped surfaces to retain the earth all as specified and as directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for Note:- All dismantled materials shall be removed without any delay and stacked at places where directed without any extra cost to the Govt.
Material and labour plain cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete as specified and as directed.
Supply and fix mild steel hand rails, posts and struts in fencing including cutting tops to shape as directed including all necessary drilling, welding, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165, complete all as specified and as directed.
Material and labour Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe-290(Gde E 165)
Supply and fix Mild steel screw bolt (machine made) 5 to 10 mm dia of neck with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm long n exc 10 cm long
Supply and fix Framed work such as grills, gratings, gates etc.using any rolled sections or tubular sections with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks, frncing posts and frames, y angles for concertina coils and similar work conforming to Fe.290.Gde-E-165.
Supply and fix chimney bars (straight or camber); bearing bars; tongues or water bars for window frames; window guard bars, plain, let in and fixed independently in wooden frames, L or T section supports for shelves etc. and similar articles conforming to Fe-290 Gde E-165
Supply and fix in repairs of PVC coated chain link fencing ( mesh 50 mm X 50 mm size) nominal dia of wire 3 mm ( including pvc coating ) fixed to fencing posts using suitable bolts and nuts complete all as specified (nuts and bolts shall be measured seperately complete all as specified and as directed.
Supply and fix in repairs of GI welded mesh fixed on to MS tubular frame. The GI wire used for making welded mesh shall not be less than 3 mm thick and the size of mesh opening shall not be more than 50 mm( The work shall be done upto a height of 20 mts) complete all as specified and as directed.
Material and labour for preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.
NRI BUILDERS AND MATERIAL SUPPLIERS (BID ID -3400777)
SATHEESAN.T.K (BID ID -3401133)
KDR CONSTRUCTION (BID ID -3410210)
stage.html
html • 0.05 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .