Changing the electric connection of Ladies hostel to the substation near D 38 Qtrs and painting the existing panel board

Amount

Supply and making end termination with brass compression gland and aluminium lugs for 3.5C X 400 sq. mm (82mm) size of XLPE insulated and PVC sheathed aluminium conductor cable of 1.1 KV grade as required.

Supplying of one number 3.5C x 400 Sq.mm size Aluminium conductor XLPE insulated PVC sheathed power cable of 1.1 kV grade etc. as required.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of 3.5C x 400 Sq.mm size in the existing masonry open duct as required.

Laying of one number XLPE insulated and PVC sheathed power cable of 1.1 KV grade of 3.5C x 400 Sq.mm, direct in ground, including excavation of trench, sand cushioning, protective covering with country burnt bricks, laid breadth wise and refilling the trench etc. as required.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of 3.5C x 400 Sq.mm size in the existing RCC/HUME/METAL/PVC pipe as required.

Charges for excavation of soil for making cable trench of size 35 x 75 cm and supply and providing of one number 160mm (6kgf/cm2) size PVC pipe, providing protective covering with country burnt bricks laid breadthwise and refilling the trenches after laying the cable, making good the damages of road with concrete mixture of 1 : 2 : 4 including watering & ramming etc. as required.

Supply and making cable route marker with cement concrete 1 : 2 : 4 of size 60 cm x 60 cm at the bottom and 50 cm x 50 cm at the top with a thickness of 10 cm including inscription duly engraved as required

Charges for disconnecting the existing 3.5C x 400 Sq.mm XLPE cable from the panel board, covering the end of the cable with suitable size plastic end cap etc. as required.

Charges for cleaning and spray painting the existing panel of 180 x 190 x 35 cm panel with 210 x 65 cm roof size or nearest size and newly fixed base covering of 180 x 30 cm with two coats of suitable colour paint, over a coat of primer in installed position and marking the identification of switches with white paint, replacing the R, Y, B indication lamp etc. as required.

Supply and installation of base covering for the existing -panel board, made from 2mm thick MS sheet of 180 x 30 cm size or nearest size etc. as required.

Linsta Services

SANTHOSHKUMAR M