Special Repair/replacement of EI , Fans including Compound lighting at 5 Delhi BN NCC, Kashmere Gate, Delhi

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. a) Group C

Supplying and drawing of following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel conduit as required. a) 3 x 1.5 Sq. Mm

b) 3 x 6 sq. Mm

c) 3 x 4 Sq.mm

Supplying & Fixing of GI Box alongwith modular base 6 module, cover plate, 2 nos 16Ampers modular switch & 2 nos 6 pin 15/16 ampers socket in recessed etc as required.

Supplying and fixing of suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 ampers modular socket outlet and 15/16 ampers modular switch, connection etc. as required.

Supplying, Installation, Testing & Commissioning of energy efficient recessed/surface mounted type 34W to 38W full window glare free opal diffuser LED panel luminaries of size 595mm x 595mm (nominal size) suitable for both Armstrong/POP/Geypsum Board or grid false ceiling fabricated with MS powder coated white CRCA housing including mounting with the help of chain/other suitable method, hanging from the ceiling including connections with 3 x 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc as required. The Total system Lumen of 34W to 38W LED should be 3600 with minimum system efficacy of 100 lumen /watt colour temperature 5500K to 6500K, power factor>0.95,CRI (Ra)>75, THD <10%, with APFC driver having driver efficiency >85%, operating voltage 150-270 volts with minimum 2.5KV surge protection. The luminaries shall be submitted with LM-80 report with a life of 50000 Hours @ L-70 and LED photo biological safety report conforming to IEC 62471 & LED source manufacturer and LM-79 report from NABL accredited Lab. The LED chip should be of Cree, Nichia, Philips Lumiled, Osram, Edison

Supplying, installation, testing & commissioning of energy efficient 1200 mm sweep size ceiling fan including wiring the down rod of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable including providing and fixing phenolic laminated sheet cover on fan box etc as required.

Supplying and fixing of stepped type electronic fan regulator on the existing modular switch box including connection but excluding modular plate etc as required

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 Volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 Ampers, tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required. a) 8 way (4 + 24), Double door

Supplying and fixing of Cable End Box (Loose wire box)(IP 43) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 Volts, on surface/ recess, complete with testing and commissioning etc. as required a) For 8 way, Double door TPN MCBDB

Supplying and fixing 5 ampers to 32 amps rating, 240/415 volts, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. a) Single pole

b) 100Ampers, 16 kA, breaking capacity TPMCCB with thermal megnatic release (ICU= 100% ICS)

Supplying and fixing of PVC cable management system / wall trunking with cover of following sizes including internal, external , flat single cover and T- cover , end cap and other accessories on the wall so as to make complete as required. a) 100 mm X 50mm

Supplying, Installation, Testing & Commissioning of 6000K (1200 mm) energy efficient LED wall mounted light luminaries, extruded aluminum heat sink provided for efficient heat dissipation & integrated electronic driver, suitable to work on 230 volts, AC supply complete with connection etc. with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc as required at site. The luminaries shall be submitted with LM-80 report with a life of 50000 Hours @ L-70 and LED photo biological safety report conforming to IEC 62471 & LED source manufacturer and LM-79 report from NABL accredited Lab. The LED chip should be of Cree, Nichia, Philips Lumiled, Osram, Edison.

Supplying and laying of one number PVC insulated and Aluminum Conductor armored power cable of 1.1 KV grade of following size direct on surface /wall as required. a) 4 X 25 Sq.mm

Supplying, installation, testing & commissioning of energy efficient surface mounted type 30 Watts to 36Watts LED panel luminaries of size 280mm x 1180mm(nominal size) including connections with 3 x 1.5 sq.mm FRLS PVC insulated copper conductor single core cable from slab to False ceiling including cutting the false ceiling, if required & repairing the damages & making good the same etc as required. The Total system Lumen of 30W to 36W LED should be 3000 with minimum system efficacy of 100 lumen /watt colour temperature 5500K to 6500K, power factor>0.95, CRI (Ra)>75, THD <10%, with APFC driver having driver efficiency >85%, operating voltage 150-270 volts with minimum 2.5KV surge protection. The luminaries shall be submitted with LM-80 report with a life of 50000 Hours @ L-70 and LED photo biological safety report conforming to IEC 62471 & LED source manufacturer and LM-79 report from NABL accredited Lab. The LED chip should be of Cree, Nichia, Philips Lumiled, Osram, Edison

Supplying and fixing of M.S. pole box of double door, front door having hinges with 4 way phase link & neutral link with copper bar & 1 no. SP MCB of 10 ampers including connection & powder coated painting etc. as required.

Supplying, installation, testing & commissioning of heavy duty exhaust fan of 300 mm sweep size, 900 rpm speed with shutter & louvers in the existing opening including making the hole to suit the size of the above fan, making good the damages, connection etc as required.

Supplying, Laying and fixing of 3 x 6 sq. mm PVC insulated and PVC sheathed/ XLPE aluminum conductor armoured power cable of 1.1 KV grade etc as required in the following manner a) On wall Surface

Supplying and fixing of DP sheet steel enclosure on surface/ recess along with 25/32 Ampers, 240 Volts “C” curve DP MCB complete with connections, testing and commissioning etc as required

Supplying, installation, testing and commissioning of energy efficient LED flood light luminaries of system wattages 100 to 120 complete with accessories on the angle iron frame including connection with 1.5 sq mm FRLS PVC insulated copper conductor single core cable complete etc as required The LED luminaries should confirm the following technical specifications :-a. Type of LED: High power LEDs Nichia/Osram/Cree/Philipsb. driver efficiency >85%c. LED Luminous Efficacy >130lm/wd. color Index(CRI) Ra>70e. Color Temperature Cool white:5500°-6500°K f. Input Voltage. 140-270V AC, 50-60 Hzg. Power Factor(PF) =0.90h. Surge protection = 4.0KV i. Total Harmonic Distortion(THD)= 10%j. Working Environment 0°C to 50°C;10%-90%RH k. Working lifetime: >50000hoursl.IP Rating :- IP : 65/IP : 66m. Housing and finish :-epoxy powder coated die cast aluminum housing with elegantly designed heat sink for efficient thermal management and to excellent corrosion resistant, cable gland P49 is provided at cable entry cover & high quality toughned glass.

Supplying and fixing of wall mounted 6 kg capacity ABC (stored pressure type) fire extinguisher, (duly ISI marked) complete etc. as required

Supplying, installation, testing and commissioning of Storage Cooler Cum Purifier 60/80 R.O having inbuilt Seven Stage stage Reverse Osmosis purification System ;suitable for operation on 230+ 10%V AC ,50 HZ with Power Consumption 700 Watts+_ 10% providing water outlet temperature at 17degC at the flow of 60LPH Having permeate production capacity of 50 LPH with autoflush@every start every stop and every one hour for one minute with Nano Silver Leaching filtration for effectively preventing post microbial contamination in the storage tank The storage tank material of SS304 & outer body material (front SS304 & Rest GI powder Coated) of Dimension 640mm x 450mm x 350mm etc. complete as required

Less Credit of following electrical accessories including dismantling etc complete as required. a) ceiling Fans

b) Box type fittings

c) Wire PVC Insulated

d) flood light fitting

e) SPDB

f) Exhaust Fans

g) LT Cubical Panel (1 Sq. Meters) With accessories

h) Switch/sockets

i) Steel Conduit

M/s Bhagwat Associates

Shri Bankey Bihari Electricals

Batra Engineers

Shaka Electrical (India)

Classic Refrigeration Works

CHETAN ENTERPRISES

SUGANDHA ELECTRICAL

Anand Electricals

M/s Rahul Associates

Krishna Electreical Works

Tushar Kumar